I was sooo happy to come across your video. Just purchased these exact lights for my 2020 Willys JLU and cannot wait to hook them up! Appreciate the concise content and tape measure tip. 😀👍 Bought the Beer tee too. Could NOT resist. 😆🤣😂🍻 FANTASTIC looking Jeep btw!
Hello!! Thank you so much for this video!! We have just ordered 2 sets of the KC Slimlites LED lights, the A Pillar Bracket & the auto theft locks!! Very informative video!!! Thank you!!
Nice! The JL A-pillar Light mounts I’ve seen to date are too bulky for my taste, but these are pleasantly minimalistic and also place the lights at the “right” location in relation to the windshield. Thanks for sharing!
What's the wind noise like when you're going down the highway with those new lights? I really like your channel. Once you gain some traction youre really going to blow up. Your bumper install video help me get my bumper installed as the instructions were garbage.
Josh G thanks man, yeah I didn’t like the bumper instructions. The lights don’t make any additional noise as far as I can tell, I really like them so far! Thanks for watching the videos, I’m glad there helping people out! Happy trails.
Dude the tape measure trick was awesome! Just installed mine and they are bright.. one question though. Where did you cut the harness to get ride of the extra wire? I am running mine of aux 4.
Yeah that trick definitely helps, I ended up cutting off what I didn't need for the switches and rolled up the excess power and ground wires. I wasn't sure if I might move them to the bumper eventually. Thanks for watching Michael!
Why did you choose to go with the spot pattern as opposed to the driving light pattern? I am thinking getting the spot pattern but placing them low in front.
Onward 4x4 Spot pattern is what I’ve had before and what the manufacturers recommend. You get a lot of glare off the hood with a wider beam pattern. If they weren’t on the A-pillar I’m sure a driving pattern would be nice. I’m really happy with mine, works great for what I need them for and doesn’t blind me off the hood.
joebee1 if I recall it was the 18-20 gauge for the wire connectors and the medium size heat shrink that’s big enough to just slide over the connector. Hope this helps!
@@FROSTBITEOFFROAD Thank You, I ordered based on color of what you used from video, very light blue marine grade on amazon, which is 14-16 gauge, but no big deal, I'll order 18-20 gauge just to be safe. I want to let you know i have used your videos and tips to install many of same items you have, front drive shaft, metalcloak lift, now same KC Lights and I have a Smitty built HD Tire Carrier, similar to Rugged Ridge. All these install video's have helped me out immensely, I really appreciate the time you take to make them. Thanks. Keep up the great work you do.
joebee1 you may be right about the size, I did use the light blue ones. I’m really glad the videos have helped you build up your Jeep! It’s really cool to hear people are benefiting from watching them, it’s definitely motivating! Thank you for watching and let me know if you have any more questions.
Great job on the install video. Concise and filled with helpful tips. I'm getting ready to do my own install, so thanks for the excellent video.
I’m glad the video will help you out on your install, thanks for watching Erica!
I was sooo happy to come across your video.
Just purchased these exact lights for my 2020 Willys JLU and cannot wait to hook them up!
Appreciate the concise content and tape measure tip. 😀👍
Bought the Beer tee too. Could NOT resist. 😆🤣😂🍻
FANTASTIC looking Jeep btw!
Holly G thanks for watching the video! Hope you enjoy your new lights, I use mine everyday and love them! Have fun in your new Jeep! Happy trails.
Good job on the install !
Thanks for watching Nick! I still really enjoy these lights.
I dont typically comment on videos. but just am installing the same on my rubicon and your video is absolutely AMAZING!!!! GREAT JOB!
Thanks Nadia, I’m glad the video helped you out! Enjoy your Rubicon and thanks for watching!
Awesome video instruction! I watched your vid and then used the knowledge to install mine. Thanks for the taking the time to set this up!
I’m glad the video helped you out, thanks for watching Lou!
Hello!! Thank you so much for this video!! We have just ordered 2 sets of the KC Slimlites LED lights, the A Pillar Bracket & the auto theft locks!! Very informative video!!! Thank you!!
Lisa Marie Landry no problem, glad the video helps you out. You’re going to really enjoy the new lights!
Great video man. Very informative. I am looking to do this same setup very soon. I will use this as instruction! 👊🏼
Young Money Fishing thanks man, these lights are nice!
Nice! The JL A-pillar Light mounts I’ve seen to date are too bulky for my taste, but these are pleasantly minimalistic and also place the lights at the “right” location in relation to the windshield. Thanks for sharing!
Smokey the Jeep yeah that’s why I ended up getting these ones. Thanks, happy trails!
Thanks for this video, I’m going to add those to my Jeeps list of want toos ... after the spare tire hinge, and bumper/winch and GPS , jeeps are cool.
Aaron Chandler yes they are, and the modifying is endless!
Excellent. Thanks for sharing. Just what I needed.
No problem, thanks for watching Mike!
What's the wind noise like when you're going down the highway with those new lights?
I really like your channel. Once you gain some traction youre really going to blow up.
Your bumper install video help me get my bumper installed as the instructions were garbage.
Josh G thanks man, yeah I didn’t like the bumper instructions. The lights don’t make any additional noise as far as I can tell, I really like them so far! Thanks for watching the videos, I’m glad there helping people out! Happy trails.
Those rock🤘 @rock.n.roll.crawler
Dude the tape measure trick
was awesome! Just installed mine and they are bright.. one question though. Where did you cut the harness to get ride of the extra wire? I am running mine of aux 4.
Yeah that trick definitely helps, I ended up cutting off what I didn't need for the switches and rolled up the excess power and ground wires. I wasn't sure if I might move them to the bumper eventually. Thanks for watching Michael!
Great video!👍 @15.jku
There are five different size locking nut sets on their website. Do you remember which one you got for these?
Yeah here it is: 7318 1
KC LKZ - M10-1.5 Light Lock Security Nut Set - #7223
Why did you choose to go with the spot pattern as opposed to the driving light pattern? I am thinking getting the spot pattern but placing them low in front.
Onward 4x4 Spot pattern is what I’ve had before and what the manufacturers recommend. You get a lot of glare off the hood with a wider beam pattern. If they weren’t on the A-pillar I’m sure a driving pattern would be nice. I’m really happy with mine, works great for what I need them for and doesn’t blind me off the hood.
@@FROSTBITEOFFROAD It makes sense. I didn't think about the glare over the hood which likely is a lot more with the driving light pattern.
Liked, subscribed
@adventurethirty
@kratosthejeep look forward to hopefully wheeling with ya sometime
Bill Allen yeah me too! You guys still go out on Monday’s?
@@FROSTBITEOFFROAD unfortunately my days off have changed I now have Wednesday Thursday Friday off, most likely will be doing fridays
Bill Allen that’s cool I could probably swing a Friday with a little heads up.
@@FROSTBITEOFFROAD perfect we will plan something soon
Bill Allen sounds good man!
what size wire splice did you use? and what size heat shrink tubing did you use? Thank You. (No problem if you can't remember)
joebee1 if I recall it was the 18-20 gauge for the wire connectors and the medium size heat shrink that’s big enough to just slide over the connector. Hope this helps!
@@FROSTBITEOFFROAD Thank You, I ordered based on color of what you used from video, very light blue marine grade on amazon, which is 14-16 gauge, but no big deal, I'll order 18-20 gauge just to be safe. I want to let you know i have used your videos and tips to install many of same items you have, front drive shaft, metalcloak lift, now same KC Lights and I have a Smitty built HD Tire Carrier, similar to Rugged Ridge. All these install video's have helped me out immensely, I really appreciate the time you take to make them. Thanks. Keep up the great work you do.
joebee1 you may be right about the size, I did use the light blue ones. I’m really glad the videos have helped you build up your Jeep! It’s really cool to hear people are benefiting from watching them, it’s definitely motivating! Thank you for watching and let me know if you have any more questions.
@corylafollett
@jojowarden OlllllO
Great video. @j.d.mcbee
Great video and content.
@Igoturpb
@wild.momma
@purple_haze_the_tj
@punknspicejl
Liked & subscribed! @alexdrivesjeeps 🤘🏼
#jt_heathen
Great vid! Liked and subscribed. Thinking of ordering the same setup - looks great on the JL! @rollingdonut
I guess Im kinda randomly asking but do anybody know of a good place to stream new movies online?
@Callen Darian Lately I have been using FlixZone. Just search on google for it :)
@Callen Darian I would suggest Flixzone. You can find it on google :)
*good video and notes
Did a sub and a like
@pellegrinop524
Great video! @grey_jediknight
@melynnr
@miss.breezy.jl
Like and subbed my dude! @johnnymoon1
John Moon thanks man! We need to go wheeling sometime soon! Hopefully my Jeep can keep up with that crawler of yours.
@kifaru_jurassic_jku
@dees.life_
@haydenjackson12 instagram, very nice Jeep