Thanks for the video, you made it super super straightforward. The extra step that I did was disabled the auto tailgate function from the dashboard beforehand. Shut the tailgate manually after installation then turn back on the auto tailgate. Works great, and no resetting needed.
Thanh, thanks for the great video. it was indeed simple but awkward to install. Biggest problem was getting the connector loose, not obvious how to release. It was also difficult to reinstall the panel because the wires from the harness and the finish panel left the panel hanging. I kept pulling out the connections on the LED inserts. I finally had to loop the led pigtail and feed wire and sip tie so they didn't pull apart as I was trying to reattach the door trim panel. Cant wait to see the difference at night for loading the back.
Hey Dude Your video is so spot on. After watching you do this install, it only took me about 10 minutes. (If I wasn't so afraid of tearing something up) I could have done it quicker. Thank you so much for your video. You are the best!
Just installed this in my hylander, literally took me 10 minutes, quick and easy mod. I used some eletrical tape to clean the wires and made sure to tuck the wires for the led lights behind the sound deadning. Thanks for the DYI, found it super helpful.
Hey, My Friend... I just went to order some for myself and saw pictures of your car on the website. Awesome! I can't wait to get them installed. You really do a great job explaining in detail how to install. I appreciate You!
I appreciate the support! CarTrimHome has been a trusted sponsor of 2yrs and we have a great relationship! Let me know if you get stuck when you receive the product, we're here to help!
Hey Thanh.....Just wanted to let you know that I purchased these lights to install in my 2021 Highlander. I can't wait until they arrive from Car Trim Home. Thanks again for making the install video. They're going to look great. 🙂
@@vietbubbletea the item arrived in a week from China to Toronto! I just installed on my 2023 Hybrid LTD. Pushing the close button on the hatch didn't do anything, didn't even make a sound. I remembered reading a comment left by one of your views before I started the install with a similar issue and thought this might be common for newer model years. As I walked around to the drivers side I had this dreadful thought, since I manually closed the hatch what would I have to do to be able to open it again if the button from the interior wouldn't open it either....................Pushing the hatch button by the drivers side did make the beep sound and hazard lights blinked to acknowledge the button actuation but the hatch didn't open. I next turned the vehicle on and pushed the interior hatch button once again and this time it worked - all functions are back; kick to open, key fob, and interior button. Thought I would share this with your viewers, thank you very much again for your review and install video, keep up the good work!
very informative video. the 5th gen toyota prius can also use a rear hatch led light similar to what you share with the highlander. i then checked cartrimhome hoping to find parts for the prius but no luck. thanks for the video.
Really liked the lights. Going to order one, as prior to this I was unsure if this was plug and play. I was about to order the automatic fold/unfold mirror mechanism from cartrimhome, however it mention without the 360 camera? I am unsure if that mechanism would work for the platinum highlander with the camera as I have that? If it can be done, would you do a video on that? I have also ordered ambient lights for the foot well, doors lining/holders, console and for the roof lining from aliexpress. This is my first time doing the ambient lights, no experience on it. Will see how it goes. Thanks bud!!
Thanks for the support! CarTrimHome actually sent me their folding mirrors to test on my Platinum trim months ago but I haven't gotten around to testing if its compatible for the same reasons but if I do, I'll let you know! Let me know if you get stuck with your other mods!
Idk why by 2024 they still haven’t added lights to the trunk of the Highlander. The grand highlander has them. I can’t see anything in the trunk at night
This was really helpful! I did have a question. The cover of that trunk does stick out a bit even though all the clips are in. I’m not sure if you had that issue or if my wires are making it so it’s not secured completely.
Thanks, I would double check to make sure all of the red circular clips are properly fastened to the cover as I had one red clip that stayed stuck to the lift gate and had to realign it. Also the wire bundle that plugs into the ECU is pretty thick and could cause the cover to bulge out if you're cramming the wires behind it, I used a couple zip ties and cinched it closer to the rear lift gate and that helped me with any clearance issues. I hope that helps!
Only thing I wish is that they would automatically turn on all the time. They seem to be hit and miss. What I am glad is they both will NOT come on by accident when the hatch is closed😊
Agree with that comment, for me, the right one does not turn on automatically although the left does 100%. Contacted Cartrimhome support and they said factory would send a replacement one to see if it fixes it. I feel a real switch would do a better job than a capacitive sensor switch. EDIT: just received the replacement part tonight, installed right away. Tried it 10 times: 10 success. I can say the product is very good! And the customer service is up to the product!
Thanks for the video. Just installed mine on a 2022 Bronze Edition. The tailgate button did not work at all when I tried to close the tailgate. I tried holding the key fob button but it blinked at me. So I manually closed it and then it opened and closed just fine.
Maybe l missed it, but what is the price for these? Always great videos. Looking to do some upgrades, thanks to you showing how easy it can be done, on my 2023 Bronze Edition Highlander. Cheers.
Good Can you help me? When I connect the lamp plugs, the camera reader turns green and when I disconnect the lamp connection it returns to normal, why?
Great video. There are no instructions on how to toggle the operating mode. I want them to stay off unless I turn them on but they are always automatically ON. How do I change it?
If you have the same set I have, you can touch the power sensor in the middle of the lights off when the lift gate is in the open position and it will remain off until you manually turn them back on.
@@vietbubbletea it’s the same set but I turn them off, close the hatch, they are off when closed but when I reopen, they turn on again. I can’t seem to get them to turn off and stay off until I manually turn them on again. Very frustrating, my hatch is open a lot during the day and I don’t want to drain the battery when I forget to check if they are on
Hmmm, I don't have that issue. If you purchased it through CarTrimHome, document your issue to see if they can help trouble shoot or determine if you have a defective set. Have you tried unplugging/plugging the wires to see if it resets the lights?
Some members have experienced this as well and it seems to be a defect in the light that's not turning back on. If you purchased through CarTrimHome, send them a video documenting the issue and they'll send you a replacement set.
Yes, I slowly pushed it closed and it automatically locked and it started working and again. I was prepared to turn off and on the PBD settings from the steering wheel control but didn't need to.
@@vietbubbletea Thanks bro i`m gonna try this , keeping my fingers crossed. i just don`t want no electronical issues , how are these lights holding up so far?
@@depecheddurand The lights are still running strong since the day I installed them. You shouldn't have any issues but if the product is defective for any reason and you purchased from CarTrimHome, they'll take care of you. Let me know how it goes!
@@vietbubbletea I see, There’s no way just to hook up the power supply and switch it manually. I’m asking some seller on Ally express if there something compatible for my Highlander, Thanks! Been looking for these videos of upgrade for 4th Gen Highlander! Glad I came across with your videos, appreciate you man!
Hi I have problem with my tail gate, It doesn't close, makes beeping noises but doesn't close, I know I need to reset the opening and closing but that doesn't help either, I'd love to get some good advice
Try removing the lights to see if the lift gate works normally again. If it does, reinstall making sure your car is turned off and no electronics or AC is turned on during installation. I manually closed my lift gate after I tested the lights and everything worked for me. If you still have beeping issues, try resetting the PBD function on your steering wheel control to see if that resolves the issue.
@@vietbubbletea I also tried disconnecting and reconnecting the original connections as it comes from the company and still did not solve the problem, is there a situation where the fuse is burnt even if it beeps? I would like to point out that even from inside the vehicle with the button on the dashboard and from the remote control and from the tail gate, it does not work for me.
@@user-um9md9ug5j If it still doesn't work after uninstalling the lights and you've already attempted to reset using the PBD settings, you may need to have the dealer diagnose it under warranty. One member mentioned something similar to yours and the dealer determined that the lift gate ECU was the issue and replaced it. You could also check to see if a fuse blew too.
Had the same problem and could not solve it. The lights worked fine so I Removed everything and tested the lift gate again and it worked fine. I found an issue with one of the harness connectors (the grey ones). The pins would not align properly so I could not insert it all the way. They were really cool about it and shipped me another set. All worked fine with the new set.
@@vietbubbletea Hi everyone, I would like to tell you that my problem has been solved, which was that one of his pin connectors was crooked and he gave a command that there is a problem with the back door, the issue is solved, many thanks to everyone for the help and advice.
I would imagine that it would if you have an L trim since it can still draw power from the lock actuator. If you don't have a power lift gate, you might only turn on/off manually and not have the automatic setting but it should still work.
![[LIVE] MCHOICE & MINT AWARDS 2024 at TRUE ICON HALL, ICONSIAM](http://i.ytimg.com/vi/wMewUeT5nbY/mqdefault.jpg)
Thanks for the video, you made it super super straightforward.
The extra step that I did was disabled the auto tailgate function from the dashboard beforehand. Shut the tailgate manually after installation then turn back on the auto tailgate.
Works great, and no resetting needed.
That's a great tip, thanks for sharing!
@@vietbubbletea looking forward to your next video ❤️🙏🫡🙇.
Thanh, thanks for the great video. it was indeed simple but awkward to install.
Biggest problem was getting the connector loose, not obvious how to release.
It was also difficult to reinstall the panel because the wires from the harness and the finish panel left the panel hanging.
I kept pulling out the connections on the LED inserts.
I finally had to loop the led pigtail and feed wire and sip tie so they didn't pull apart as I was trying to reattach the door trim panel.
Cant wait to see the difference at night for loading the back.
Glad you figured it out, you'll love them at night!
Hey Dude Your video is so spot on. After watching you do this install, it only took me about 10 minutes. (If I wasn't so afraid of tearing something up) I could have done it quicker. Thank you so much for your video. You are the best!
Awesome to hear, that's why I love making these videos!
Just installed this in my hylander, literally took me 10 minutes, quick and easy mod. I used some eletrical tape to clean the wires and made sure to tuck the wires for the led lights behind the sound deadning. Thanks for the DYI, found it super helpful.
Thanks and nice job on the install!
Hey, My Friend... I just went to order some for myself and saw pictures of your car on the website. Awesome! I can't wait to get them installed. You really do a great job explaining in detail how to install. I appreciate You!
I appreciate the support! CarTrimHome has been a trusted sponsor of 2yrs and we have a great relationship! Let me know if you get stuck when you receive the product, we're here to help!
Hey Thanh.....Just wanted to let you know that I purchased these lights to install in my 2021 Highlander. I can't wait until they arrive from Car Trim Home. Thanks again for making the install video. They're going to look great. 🙂
I appreciate the support Paul!
These look sweet! Wish they had these for 3rd Gen Highlander
Definitely two thumbs up .Looks really easy to do. Thank you for sharing your experience.
Thanks Paul!
Thank you for uploading the install tutorial and review. Your videos are easy to follow and super helpful.
Used your link to purchase one for myself!
Thank you and I appreciate your support!
@@vietbubbletea the item arrived in a week from China to Toronto!
I just installed on my 2023 Hybrid LTD.
Pushing the close button on the hatch didn't do anything, didn't even make a sound. I remembered reading a comment left by one of your views before I started the install with a similar issue and thought this might be common for newer model years.
As I walked around to the drivers side I had this dreadful thought, since I manually closed the hatch what would I have to do to be able to open it again if the button from the interior wouldn't open it either....................Pushing the hatch button by the drivers side did make the beep sound and hazard lights blinked to acknowledge the button actuation but the hatch didn't open.
I next turned the vehicle on and pushed the interior hatch button once again and this time it worked - all functions are back; kick to open, key fob, and interior button.
Thought I would share this with your viewers, thank you very much again for your review and install video, keep up the good work!
@@133bernie I'm glad you resolved the issue and thanks for sharing your experience with the community!
very informative video. the 5th gen toyota prius can also use a rear hatch led light similar to what you share with the highlander. i then checked cartrimhome hoping to find parts for the prius but no luck. thanks for the video.
Thanks I just ordered this with your discount. I like functional mods!
Nice video made me order a set. Unfortunately mine stopped working after a month. I bought mine from Amazon
Nice video. I wonder what if open the gate just as not as high. You can seat in the car and do this installation
It's possible but sitting in the back wouldn't be good for my lower back plus the extra light from outside helps.
Thanks bro took only 20 minutes
Right on bro!
Really liked the lights. Going to order one, as prior to this I was unsure if this was plug and play.
I was about to order the automatic fold/unfold mirror mechanism from cartrimhome, however it mention without the 360 camera? I am unsure if that mechanism would work for the platinum highlander with the camera as I have that? If it can be done, would you do a video on that?
I have also ordered ambient lights for the foot well, doors lining/holders, console and for the roof lining from aliexpress. This is my first time doing the ambient lights, no experience on it. Will see how it goes.
Thanks bud!!
Thanks for the support! CarTrimHome actually sent me their folding mirrors to test on my Platinum trim months ago but I haven't gotten around to testing if its compatible for the same reasons but if I do, I'll let you know! Let me know if you get stuck with your other mods!
❤ very nice product and video. Thank you.
Great video! This is very helpful. Used your coupon code and ordered just now. Wonder how long the shipment may take. Cannot wait to install.
Thanks for the support! If you're in the US, it should arrive in 7 business days or less.
@@vietbubbletea You are welcome. I am in US.
Idk why by 2024 they still haven’t added lights to the trunk of the Highlander. The grand highlander has them. I can’t see anything in the trunk at night
This was really helpful! I did have a question. The cover of that trunk does stick out a bit even though all the clips are in. I’m not sure if you had that issue or if my wires are making it so it’s not secured completely.
Thanks, I would double check to make sure all of the red circular clips are properly fastened to the cover as I had one red clip that stayed stuck to the lift gate and had to realign it. Also the wire bundle that plugs into the ECU is pretty thick and could cause the cover to bulge out if you're cramming the wires behind it, I used a couple zip ties and cinched it closer to the rear lift gate and that helped me with any clearance issues. I hope that helps!
Perfect, except I have a 2016. Not made for mine?
Unfortunately, not this kit
Only thing I wish is that they would automatically turn on all the time. They seem to be hit and miss. What I am glad is they both will NOT come on by accident when the hatch is closed😊
Agree with that comment, for me, the right one does not turn on automatically although the left does 100%. Contacted Cartrimhome support and they said factory would send a replacement one to see if it fixes it. I feel a real switch would do a better job than a capacitive sensor switch. EDIT: just received the replacement part tonight, installed right away. Tried it 10 times: 10 success. I can say the product is very good! And the customer service is up to the product!
Thanks for the video. Just installed mine on a 2022 Bronze Edition. The tailgate button did not work at all when I tried to close the tailgate. I tried holding the key fob button but it blinked at me. So I manually closed it and then it opened and closed just fine.
Thanks, that was my experience as well so I had to manually close the lift gate for it to work properly again.
Maybe l missed it, but what is the price for these? Always great videos. Looking to do some upgrades, thanks to you showing how easy it can be done, on my 2023 Bronze Edition Highlander. Cheers.
Thanks! The product link is in the video description and price would be $46.50 USD free shipping after discount code.
How do you get to the website? What is the website for that product?
@@stevejohnson4538 Product link and discount code is in the video description for you.
@@stevejohnson4538 cartrimhome.com/Hatch-Door-Lights-Replacement-kit-For-Toyota-Highlander-2020?tracking=ThanhTran+
How about for 2015 highlander? Thanks
@Sammyt107 Sorry, this product will only work for 2020-2024 Highlanders.
Good
Can you help me?
When I connect the lamp plugs, the camera reader turns green and when I disconnect the lamp connection it returns to normal, why?
@@ivoismaelso Not sure what you mean about 'camera reader turns green'.
Does this work for Grand Highlander? Thanks! Great video!!!
Thanks, unfortunately this kit won't fit a grand highlander. I think there's an OEM kit that you can look into: images.app.goo.gl/J2NCTwLFLKYZU7Bz8
Great video. There are no instructions on how to toggle the operating mode. I want them to stay off unless I turn them on but they are always automatically ON. How do I change it?
If you have the same set I have, you can touch the power sensor in the middle of the lights off when the lift gate is in the open position and it will remain off until you manually turn them back on.
@@vietbubbletea it’s the same set but I turn them off, close the hatch, they are off when closed but when I reopen, they turn on again. I can’t seem to get them to turn off and stay off until I manually turn them on again. Very frustrating, my hatch is open a lot during the day and I don’t want to drain the battery when I forget to check if they are on
Hmmm, I don't have that issue. If you purchased it through CarTrimHome, document your issue to see if they can help trouble shoot or determine if you have a defective set. Have you tried unplugging/plugging the wires to see if it resets the lights?
On the fence about ordering. Can these be auto on/off with the tailgate opening? Or only manually by pushing the button?
Will it for sure fit a new 2023 XLE?
Yup, it will fit all trims for the 4th generation Highlander (2020-2023)
Any idea how to get both lights to turn on when I open the lift gate? Only one side does. 🤷🏽♂️
Some members have experienced this as well and it seems to be a defect in the light that's not turning back on. If you purchased through CarTrimHome, send them a video documenting the issue and they'll send you a replacement set.
How to set it up always on? Most of the time one side is on?
You may have a defective panel, if you got it from CarTrimHome, they can send you a replacement set.
Thanks for the reply. Yes they are replacing it. I did change all my lights to led. Exterior with drl. Now doing ambient lol
Eazzie Piezzie Lemon Squeezie 🍋🍋🍋
😁😁😁
So, to reset the liftgate all you would do is just manually close it all the way and it resets that way? Did it take much force to close it manually?
Yes, I slowly pushed it closed and it automatically locked and it started working and again. I was prepared to turn off and on the PBD settings from the steering wheel control but didn't need to.
So in case of an error all we have to do is to shut down the liftgate manually? thats it ?
That was it for me
@@vietbubbletea Thanks bro i`m gonna try this , keeping my fingers crossed. i just don`t want no electronical issues , how are these lights holding up so far?
@@depecheddurand The lights are still running strong since the day I installed them. You shouldn't have any issues but if the product is defective for any reason and you purchased from CarTrimHome, they'll take care of you. Let me know how it goes!
Hey bro i did it on my own but couldn`t do without your video you are a genius. Thanks very much for this video , highlander looks dope.
Sweet, I'm glad the install was smooth for you! I appreciate the support.
Hi this compatible with 2020 LE trim? I don't have automatic tail gate how do I connect it to the power supply?
Thanks!
Unfortunately, it's only compatible with powered lift gates.
@@vietbubbletea I see, There’s no way just to hook up the power supply and switch it manually. I’m asking some seller on Ally express if there something compatible for my Highlander,
Thanks! Been looking for these videos of upgrade for 4th Gen Highlander! Glad I came across with your videos, appreciate you man!
Nicr
Hi
I have problem with my tail gate, It doesn't close, makes beeping noises but doesn't close, I know I need to reset the opening and closing but that doesn't help either, I'd love to get some good advice
Try removing the lights to see if the lift gate works normally again. If it does, reinstall making sure your car is turned off and no electronics or AC is turned on during installation. I manually closed my lift gate after I tested the lights and everything worked for me. If you still have beeping issues, try resetting the PBD function on your steering wheel control to see if that resolves the issue.
@@vietbubbletea I also tried disconnecting and reconnecting the original connections as it comes from the company and still did not solve the problem, is there a situation where the fuse is burnt even if it beeps? I would like to point out that even from inside the vehicle with the button on the dashboard and from the remote control and from the tail gate, it does not work for me.
@@user-um9md9ug5j If it still doesn't work after uninstalling the lights and you've already attempted to reset using the PBD settings, you may need to have the dealer diagnose it under warranty. One member mentioned something similar to yours and the dealer determined that the lift gate ECU was the issue and replaced it. You could also check to see if a fuse blew too.
Had the same problem and could not solve it. The lights worked fine so I Removed everything and tested the lift gate again and it worked fine. I found an issue with one of the harness connectors (the grey ones). The pins would not align properly so I could not insert it all the way. They were really cool about it and shipped me another set. All worked fine with the new set.
@@vietbubbletea Hi everyone, I would like to tell you that my problem has been solved, which was that one of his pin connectors was crooked and he gave a command that there is a problem with the back door, the issue is solved, many thanks to everyone for the help and advice.
Can this work with a non powered lift gate?
I would imagine that it would if you have an L trim since it can still draw power from the lock actuator. If you don't have a power lift gate, you might only turn on/off manually and not have the automatic setting but it should still work.
How to get order that here in Canada bro?
You can use the product link in the video description and enter your Canadian address and it will calculate the shipping for you.
Does this effect the boot open/close speed?
Nope, the speed remains the same.
Hi there where can i purchase it! Thank you
Hi, the product link and discount code is in the video description for you!