I hope I never have to go through this. My CH2 was intermittently cutting off audio in full up position. Sprayed DeOxit Fader lube and it's worked well for 3 hours so far. Maybe regular lube maintenance will work until the fader physically breaks.
Definitely yours have the same issue, that’s what’s happening on my before, when you slide up it works, once you let go, no pressure for on the fader to push down, audio get cut off… You have the same issue by brother. Fix it and sell it ASAP. I sold mine i got tired fixing it.
Well thanks for this video. This made my decision to go s11 over s7. Good thing you’re knowledgeable and able to fix your own mixer without much downtime. Thanks for taking the time to make the video 👏🏾
Actually s7 is fine except for the channel faders. I still have it, I’d love to get the s11 but I don’t like the build in screen on. It just confuses me
Coming back 2 years later because im starting to have upfader issues aswell... Do you remember the thickness of the adhesive you used? Also do you remember if there are visible traces on the PCB where the sticker attaches to? I'm a bit scared of using that technique and later if I need to fix it again the sticker might rip a layer of the PCB 😬
I just repaired mine. You can drill and countersink a 1/8 hole through the plastic and run a flathead m3x8 screw in to threaded holes of the fader. I still need to put back to gether and test but I think this the best way to fix.
Reloop Elite IS nice don't listen to haters because it is not Pioneer or RANE. Just make sure the firmware is downloaded to 1.06 (the latest)The ONLY issue is it does not have a lot of fx for using real vinyl. The Reloop ELITE looping section is the easiest to use by far. You can really use it live in real time with no bullshit Once you get used to the ELITE it is a joy to use, I sold my Pioneer S9 for a second one and never looked back
@@Ninja_man_son Yeah, I like it if you are a real hard core turntablist that is just into cutting juggling and shit and don't need frilly effects and just into skills then the ELITE is good. The built in Serato effects are fine by me no one complains The paddles that the Pioneer/ Rane mixers have are nice but who cares? Just keep on the fx and use the mini level/depth faders slide them up and down (same as on/ off paddles) Outside of the innofaders (yes all 3 are removable and exchangeable and upgradeable) believe it or not when set up right you do NOT need to upgrade them The looping section is the best on the market 1 button encoder just set your length for seamless loop and press once BANG seamless loop live no bullshit better than RANE and PIONEER
The layout of the reloop is 👌👌,. the output on it is super loud, and the eqs are 👌. But sad to say, the build quality is poor, I've had mine for about 2 years And the load buttons and effects buttons are terrible. Took it back in to fix, only for it to become faulty again 😭.
@@Will-rh1wh I have Reloop ELITE, S7 and REV7.I think Reloop ELITE has great maintainability compared to S7. So far, the faders have not broken easily. In terms of durability, I recommend the S7's crossfader, but the CH fader is as shown in the video, which is disappointing. Pioneer doesn't seem to have made it with the premise of replacing it from the beginning. As if to tell you not to take it apart.
My channel fader cuts in volume as I fully open it. Is that the problem you had? I've reversed it which has enabled me to continue using it until I can send it in. After watching this, I think I'm going to just buy the S11, send in the S7 get it fixed and then sell it.. I need to know my mixer isn't going to flake out when I already baby it..
The fader channel are bad, I have clean once in a blue. It’s easy to ware out, keep in mind this is a battle mixer it suppose to be build like a tank not like this.
Thanks, i curently run 2 cdj400 and djm400 with traktor. I am thinking djm-750 mk2 or djm-S7 to combine with cdj400s. I am not scratching, i am intersted in good sound coming from the soundcard ether djm750mk2 or s7. I believe both having the same soundcard
@@kiriakidis86 if you are not scratching, then you probably mixing lots oh house. It’s probably better if you get the 750mk2 perfect for house mixing with the effect of white noise which is commonly use for house mixing, sound quality, I can’t tell the difference, I used them 750mk2 mixer at my friends house and they are great.
uf..i was thinking about buying one, but after this...uhhh.. i think im going for a second hand reloop elite .Doesnt have paddles, but at least the quality is better , im not going to have problems with the innos and the price fits my budget. Great video man. :D Did you bought the s11? Sometimes i think about rane :D
Thanks man glad I helped out. I have a friend that owns an S11 and hell yes, the channel fader on it is way 200times better than s7, (3 magvel pro fader in it) Once I get my tax refund yeah I’ll get me an s11. Thanks, honestly rane 70 I thing is better than s7 but not sure it’s just my theory.
@@Ninja_man_son Hi, ive played with the s11 and rane 72 mk1 (same bild quality as the 70 i think :D) and after a couple of minutes i was more happy with the rane. I really thought the s7 would be the same quality as the 11. The 11 its too expensive for me :(. I like the Pioneers because they work in serato and rekordbox. Ahhh, forgot to tell, i think the s11 dont have contactless Line faders.... not so shure, i think they are normal alpha faders. Ill check it out. :D
Interesting, I guess using the faders stresses the solder joints so they eventually break off the board. Dang, why didn't u send it back? they probably would send had u a new one since it's not even 1yr old.
I did called them and ask for it, they want me to ship it to them to California (I’m from NJ) and they will fix it for me without any cost. The thing is I don’t want to wait for longer than a month from them to shipped it back, since I can fix it my self. I just decided to fix it my self.
@@Ninja_man_son Thanks foor the reply. Oh, damn... You had to ship it across the US?? Yeah that's a no-no, I would have done it myself too. Cheers bro, keep making content. 👍
True. You can try to put 3M adhesive on it like I did, it works great, It won’t come loose anymore. Instead of having the 3 connection holding it from the board. Such a poor design
@@Ninja_man_son on the video, the numbers of the spare part are not visible, maybe you will see on the original video,plz. What do you think, is it worth it to open it in advance and carry out the prevention of breakdowns in the future?
@@neurosurg85 it’s not worth of a work to disassemble it again, unwiring it from the set, dissecting it for the part number. Maybe when something went wrong again, I will make a video of “how to” breakdown,
Pioneer 'fill in the blank' is now crap. The trend to use cheap controller hard wear instead of real hard wear had me move to Rane. Even my 6 year old djm-s3 is easy to fix, pioneer has changed for the worse. And this was after returning an s11 after having it in hand next to the Rane 70, the screen is a gimmick I choose to live without.
Thanks man ! Wished I known this before I bought it
I hope I never have to go through this. My CH2 was intermittently cutting off audio in full up position. Sprayed DeOxit Fader lube and it's worked well for 3 hours so far. Maybe regular lube maintenance will work until the fader physically breaks.
Definitely yours have the same issue, that’s what’s happening on my before, when you slide up it works, once you let go, no pressure for on the fader to push down, audio get cut off…
You have the same issue by brother.
Fix it and sell it ASAP. I sold mine i got tired fixing it.
@@Ninja_man_son Thank you for your input. That is my plan.
Well thanks for this video. This made my decision to go s11 over s7. Good thing you’re knowledgeable and able to fix your own mixer without much downtime. Thanks for taking the time to make the video 👏🏾
My pleasure
thanks for posting, 70 it is!
Actually s7 is fine except for the channel faders. I still have it, I’d love to get the s11 but I don’t like the build in screen on. It just confuses me
Coming back 2 years later because im starting to have upfader issues aswell... Do you remember the thickness of the adhesive you used? Also do you remember if there are visible traces on the PCB where the sticker attaches to? I'm a bit scared of using that technique and later if I need to fix it again the sticker might rip a layer of the PCB 😬
I just repaired mine. You can drill and countersink a 1/8 hole through the plastic and run a flathead m3x8 screw in to threaded holes of the fader. I still need to put back to gether and test but I think this the best way to fix.
this is why i went with the 70!
Good decision
Reloop Elite IS nice don't listen to haters because it is not Pioneer or RANE. Just make sure the firmware is downloaded to 1.06 (the latest)The ONLY issue is it does not have a lot of fx for using real vinyl.
The Reloop ELITE looping section is the easiest to use by far. You can really use it live in real time with no bullshit
Once you get used to the ELITE it is a joy to use, I sold my Pioneer S9 for a second one and never looked back
I might get a reloop, what do you recommend.😁
@@Ninja_man_son Yeah, I like it if you are a real hard core turntablist that is just into cutting juggling and shit and don't need frilly effects and just into skills then the ELITE is good. The built in Serato effects are fine by me no one complains
The paddles that the Pioneer/ Rane mixers have are nice but who cares? Just keep on the fx and use the mini level/depth faders slide them up and down (same as on/ off paddles)
Outside of the innofaders (yes all 3 are removable and exchangeable and upgradeable) believe it or not when set up right you do NOT need to upgrade them
The looping section is the best on the market 1 button encoder just set your length for seamless loop and press once BANG seamless loop live no bullshit better than RANE and PIONEER
@@Will-rh1wh thanks for the info, I love to scratch but not that crazy like Qbert but I think I’m gonna love it.
The layout of the reloop is 👌👌,. the output on it is super loud, and the eqs are 👌.
But sad to say, the build quality is poor, I've had mine for about 2 years
And the load buttons and effects buttons are terrible. Took it back in to fix, only for it to become faulty again 😭.
@@Will-rh1wh I have Reloop ELITE, S7 and REV7.I think Reloop ELITE has great maintainability compared to S7. So far, the faders have not broken easily.
In terms of durability, I recommend the S7's crossfader, but the CH fader is as shown in the video, which is disappointing. Pioneer doesn't seem to have made it with the premise of replacing it from the beginning. As if to tell you not to take it apart.
Hi, nice video. Where can i get new linefader? Thanks
Sorry but I can’t remember
From where I can get a fader to replace
Did you find it ? I’m looking for the faders too
@@djmcdonaldd yes in india they have used parts , try to find spoilers and contact with them
My channel fader cuts in volume as I fully open it. Is that the problem you had? I've reversed it which has enabled me to continue using it until I can send it in. After watching this, I think I'm going to just buy the S11, send in the S7 get it fixed and then sell it.. I need to know my mixer isn't going to flake out when I already baby it..
The fader channel are bad, I have clean once in a blue.
It’s easy to ware out, keep in mind this is a battle mixer it suppose to be build like a tank not like this.
Hi Bro! I got the same issue on my S7, could u show me how to remove the platter please?
The faceplate?
Once I get home, I’ll make a video how to disassemble it.
@@Ninja_man_son Please do mate as I have the same issue..Cheers..
How are the channel faders in compare with djm-750 mk2 faders? Djm-750 mk2's are better than s7's?
S7 feel cheap. Real talk mk2 feels better 20 times
I’m not gonna lie, I love my s7 all and all except for the Chanel fader.
Thanks, i curently run 2 cdj400 and djm400 with traktor. I am thinking djm-750 mk2 or djm-S7 to combine with cdj400s. I am not scratching, i am intersted in good sound coming from the soundcard ether djm750mk2 or s7. I believe both having the same soundcard
And, using the xlr outputs, not have to curry the soundcraft signature with me to connect to power amps
@@kiriakidis86 if you are not scratching, then you probably mixing lots oh house. It’s probably better if you get the 750mk2 perfect for house mixing with the effect of white noise which is commonly use for house mixing, sound quality, I can’t tell the difference, I used them 750mk2 mixer at my friends house and they are great.
Hi! Thanks for the video. Do u know if i can do something when the top pin is broken? Is it possible just to replace one of those pins?
The only thing I’ve think of is the double sided adhesive, ang it works then till now.
uf..i was thinking about buying one, but after this...uhhh.. i think im going for a second hand reloop elite .Doesnt have paddles, but at least the quality is better , im not going to have problems with the innos and the price fits my budget. Great video man. :D Did you bought the s11? Sometimes i think about rane :D
Thanks man glad I helped out. I have a friend that owns an S11 and hell yes, the channel fader on it is way 200times better than s7, (3 magvel pro fader in it)
Once I get my tax refund yeah I’ll get me an s11. Thanks, honestly rane 70 I thing is better than s7 but not sure it’s just my theory.
@@Ninja_man_son Hi, ive played with the s11 and rane 72 mk1 (same bild quality as the 70 i think :D) and after a couple of minutes i was more happy with the rane. I really thought the s7 would be the same quality as the 11. The 11 its too expensive for me :(. I like the Pioneers because they work in serato and rekordbox. Ahhh, forgot to tell, i think the s11 dont have contactless Line faders.... not so shure, i think they are normal alpha faders. Ill check it out. :D
Watching lods
Interesting, I guess using the faders stresses the solder joints so they eventually break off the board.
Dang, why didn't u send it back? they probably would send had u a new one since it's not even 1yr old.
I did called them and ask for it, they want me to ship it to them to California (I’m from NJ) and they will fix it for me without any cost.
The thing is I don’t want to wait for longer than a month from them to shipped it back, since I can fix it my self. I just decided to fix it my self.
@@Ninja_man_son Thanks foor the reply. Oh, damn... You had to ship it across the US?? Yeah that's a no-no, I would have done it myself too.
Cheers bro, keep making content. 👍
had the s7 for a year, and the channel fader just broke, such a bad taste.
True. You can try to put 3M adhesive on it like I did, it works great, It won’t come loose anymore.
Instead of having the 3 connection holding it from the board. Such a poor design
@@Ninja_man_son Could you please let us know what 3m adhesive to get? Thanks for the video
@@moreandmorehits from Walmart (scotch extreme double-sided mounting tape 3m) it’s the same thing.
@@Ninja_man_son THANKS!!!
Man…. I have the same problem with mine😢
Good luck fixing it, I love that mixer except for that channel fader build.
Who knows the number (model) of the channel fader?
I called the pioneer and purchased it over the phone. I had a hard time looking for it and end up calling them, I was so pissed off about it.
@@Ninja_man_son
on the video, the numbers of the spare part are not visible, maybe you will see on the original video,plz.
What do you think, is it worth it to open it in advance and carry out the prevention of breakdowns in the future?
@@neurosurg85 it’s not worth of a work to disassemble it again, unwiring it from the set, dissecting it for the part number.
Maybe when something went wrong again, I will make a video of “how to” breakdown,
Pioneer 'fill in the blank' is now crap. The trend to use cheap controller hard wear instead of real hard wear had me move to Rane. Even my 6 year old djm-s3 is easy to fix, pioneer has changed for the worse. And this was after returning an s11 after having it in hand next to the Rane 70, the screen is a gimmick I choose to live without.
This mixer is shit it fucked me up already