Hello! I just wanted to point out that this is an old video I've made when I was in my senior year in college for my university colleagues. Currently, I've graduated and also shifted careers. However, I'm leaving this video up because it's getting a lot of traffic which means it's useful for you guys. Cheers!
Non avevo ascoltato 1 sega di quello che aveva detto il prof in classe che, oltre a dirlo sbagliato era pure impossibile da capire a detta della classe. Non tutti gli eroi portano un mantello ma alcuni sono indiani, come te! Grazie di cuore dall'Italia
@@Thomas-ui7ci mah in realtà il mio canale TH-cam nasce per l'esame di stato. Non riesco a trovare un canale TH-cam preciso che si occupi delle cose dell'esame di stato e quindi ho deciso di prendere da diverse risorse i contenuti e poi creare il mio canale a modo di archivio. Detto in parol povere non ho una fonte fissa 🫤
Thanks, I was able to submit my assignment with 5 routers. Greetings from Bolivia ❤💛💚 Gracias, pude enviar mi tarea con 5 enrutadores. Saludos desde Bolivia
The routing is incorrectly configured. Once you set the IP address of an interface, turn on that interface and it goes to an up/up state, a directly connected route will be added automatically for its network. You can verify this by running 'show ip route' command from privileged exec mode in CLI. In your case, e.g. adding 11.0.0.0/8 via 11.0.0.2 on Router 0 is redundant.
It's not about how easy or hard it is, if you would like to do a certain task you should do it using whatever technique that you think is more convenient
i have this question the network address is 200.100.10.0/24 and it shall be divided to 7 subnets. the overall design has 3 routers . i have some doubt finding the network addresses
sir , i have a modem + router and 2 other router for better wireless connection. i have connected a nas connected with router 1 . i want nas to be accessible from router2 and from modem +router.... my connection is primary modem+ router connected with internet and remaining two secondary router connected to the primary via lan .. how can i config secondary router 1 so as to access nas from other router.... without affecting dhpc of any of 2 router or router + modem
@@HussienG2 I created a network with 4 routers 2 switches and 4 pc's (2 pc's each side), 6 subnet. the left pc can't send a message to the right pc. Where do you think is the issue? Thanks btw I'm using packet tracer 3
I gave this video a thumbs down because some of your laptops failed to connect across the routers. But you continued on and kept selecting the same ones that connected.
![ILLSLICK - KILLSHOT REMIX [FULL VERSION]](http://i.ytimg.com/vi/RIK8RrqIAzE/mqdefault.jpg)
Hello! I just wanted to point out that this is an old video I've made when I was in my senior year in college for my university colleagues.
Currently, I've graduated and also shifted careers.
However, I'm leaving this video up because it's getting a lot of traffic which means it's useful for you guys. Cheers!
🤙
Damn Helpful I understood the approach and now can solve any type of network that looks like this even if the routers are added to the network!
Non avevo ascoltato 1 sega di quello che aveva detto il prof in classe che, oltre a dirlo sbagliato era pure impossibile da capire a detta della classe. Non tutti gli eroi portano un mantello ma alcuni sono indiani, come te! Grazie di cuore dall'Italia
Ciao! Sono contento che tu abbia trovato utile il mio video.
Anche se non sono indiano, sono egiziano. Attualmente sto imparando l'italiano. Saluti!
Anche tu hai la maturità quest'anno?
@@HussienG2 sí
@@informaticacheappassionaChe risorse usi per preparare la prova di sistemi? Consigli del materiale in particolare?
@@Thomas-ui7ci mah in realtà il mio canale TH-cam nasce per l'esame di stato. Non riesco a trovare un canale TH-cam preciso che si occupi delle cose dell'esame di stato e quindi ho deciso di prendere da diverse risorse i contenuti e poi creare il mio canale a modo di archivio. Detto in parol povere non ho una fonte fissa 🫤
brother thank you brother it helped me 2 years ago and now is helping my brother too 👏🏻
Straight to the point guide!, thank you so much you helped me clutch the assignment🙏
Thanks, I was able to submit my assignment with 5 routers. Greetings from Bolivia
❤💛💚
Gracias, pude enviar mi tarea con 5 enrutadores. Saludos desde Bolivia
Bro, you literally saved my life, thanks you!
its being so cool to view your videos bro, thanks aloot.
BOSS, it is the easiest way. thank you brother
I want to say u if u have great skill so plz use your voice for instructing well
It was silent and killerly good :)
straight to the point !!! Thanks a lot man
You're a legend
легенда спасибо !!!!
Thanks For Your Sharing. Thanks For Your Times
Hey, thank you for the video.
Is this 6 subnets? How we understand or count the subnets?
رائع أستاذنا الله يبارك
Thanks for the help
good job bro..❤
you've colved my problem! Thx a lot!!!!
Thanks for the vid.
way to fast and no sound it hard to follow.
U can change the speed of the video
thank you kind stranger
Too bad there is no sound to explain what you are doing but otherwise very good video
luv u man
I want say you,how to attach many static IP in one port
Thank you!
what did u did in the last
works but computers don't pack each other help me please
Thank you pro
Thank You! very helpful
Thank you ❤
The routing is incorrectly configured. Once you set the IP address of an interface, turn on that interface and it goes to an up/up state, a directly connected route will be added automatically for its network. You can verify this by running 'show ip route' command from privileged exec mode in CLI. In your case, e.g. adding 11.0.0.0/8 via 11.0.0.2 on Router 0 is redundant.
Check how to configure telnet
th-cam.com/video/8BouG32n6-8/w-d-xo.html
dayum bro, u nailed it
thankyou so much
Thankss!
Thanks a lot
thanks a lot
why in the first try of simulation, show "FAILED"?
it first needs to build the ARP table so it will show fail in the first try
voice cover will make you super,
Thanks a lot .
Thx a lot ILV
Packets get stuck in infinite loop for me between routers incorrect video
Create a network to implement 3 routers with 5 switches connected with 5 end devices each can any one help me with this question
WE NEED CONSOLE, WITH INTERFACE ITS SO EASY
It's not about how easy or hard it is, if you would like to do a certain task you should do it using whatever technique that you think is more convenient
the equivalent on the console shows in the interface, on the bottom textview
There is no we, you need it xD
Danke schön
amazing thank you so much
why not connect with RIP? Its more easy then Static, isnt it?
Thank you bro, thank you sooooooo much
It could be better if u would have added voice cover
How about doing a video of a 4 or 5 router networking setup?
same steps
Can u give the installer link for this
u fcking genius!!!! ty!!!
thx man
J'aimerais comprendre la configuration de ces réseaux
Talk less, do more!! Thank you very much!!
grazie
Thanks
:)
Thanks
this is good if it has audio
helpful.
لايوجد صوت
Ping kar ke dikhav....run hota haj kya nhi
Hi can you please me to connect 3 router with 42 pc
This is my email address nizu321@gmail.com please mail me thank you
السلام عليكم Hussein
What is the version of your packet tracer? Why am I not seeing the generic router? I only hve PT- Router and PT-Empty? version 7.3.1
Jo router directly connected hai uska bhi network address dalna jaruri hai kya
tanks cannons
i have this question the network address is 200.100.10.0/24 and it shall be divided to 7 subnets. the overall design has 3 routers . i have some doubt finding the network addresses
Total # of hosts in the network should be lesser than 256(with net & broadcast), then calculate net address using # of bits allocated in net ID.
Permision to use min 🙏😁
كفووو
And 4 router
sir , i have a modem + router and 2 other router for better wireless connection. i have connected a nas connected with router 1 . i want nas to be accessible from router2 and from modem +router....
my connection is primary modem+ router connected with internet and remaining two secondary router connected to the primary via lan ..
how can i config secondary router 1 so as to access nas from other router.... without affecting dhpc of any of 2 router or router + modem
What type of topology is this?
where is command...??
Abhi Praz Hey Abhi, it was done without commands, just the input fields.
You can see the equivalent commands under the input field
Nick Patalinghug that is correct, thanks for your helpful input
Thank you for the helpful video sir I needed this for my project :D
Check how to configure telnet
th-cam.com/video/8BouG32n6-8/w-d-xo.html
sidhi baaat no bakwas
1&2 routers are connected but 3 router is not connected what should i do sir ? Whats is the proper ip route for router 3 sir .
Pay me and i gotchu brother
This is stupid. How the hell can people follow along without any audio????
Cause you are stupid , that is why you can't follow habibi
need audio and cant see certain things
There's no audio unfortunately, but you can ask me about which parts weren't visible.
@@HussienG2 I created a network with 4 routers 2 switches and 4 pc's (2 pc's each side), 6 subnet. the left pc can't send a message to the right pc. Where do you think is the issue? Thanks btw I'm using packet tracer 3
@@HussienG2 where did you get the 11.0.0.1 and 12.0.0.1?
Deus.
where is cmd??????????
video resulation is bad. but thank you.
News One you can set the resolution to 1080p.
lul
Check how to configure telnet
th-cam.com/video/8BouG32n6-8/w-d-xo.html
D
lol
I gave this video a thumbs down because some of your laptops failed to connect across the routers. But you continued on and kept selecting the same ones that connected.
Thank you!
Thanks
Thanks