Mten4 and 18XL owner here, I have my Falcon preorder in a few months back as well to slot in-between what I have, looking forward to more content on that wheel - I'm still torn with what tire to get. I love the silence of street tires but I'm leaning more towards the knobby for wet roads and occasional unpaved scenarios.
Great video, you are putting it to good use, getting the max out of it. The torque comes from the small diameter. That makes it so eager to accelerate. I don't think bigger wheels can match that unless they have much more power. But for that power the motor will also be bigger, thus slower to get moving.
Got an mten4 as my first wheel. I had lots of fun and got really good at riding it, and was pretty good at falling with it early on. I accelerated fast to show off a bit, also because since I wasn't alone, I could finally see how fast I can accelerate without beeps. It cutout at around 25 rifht after a few beepa and i slammed and broke my radius at the elbow with no insurance. Almost ruined my whole life but I want another one 😔
I got the Begode Falcon for my kid. Yes it's slightly more expensive but you can't beat having a suspension wheel and for his weight it's a perfect fit. For my size I'm really loving the Inmotion V14.
Thanks for this video! I love my mten 4. Excited to hear you are getting the falcon! Looking forward to getting your take on it. Definitely on my list of desired wheels at the moment.
you can put some griptape on the nubby foot pedals and they are alot more enjoyable. I also bought an MTEN4 when they first came out, very capable little wheel, if you take care with it.
@@TheBergMan lol, I hear ya. My homie bought mine, and he rolled over some clothes in his basement and burned out the motor controller so had to replace it. they are wiched fun toys. way more fun than the mini!
I made custom pads using eva yoga blocks for my Mten4 haha.. But it made a big difference for me... I'll be waiting to see your begode falcon review, maybe it will be my next wheel, or maybe I get an used T4 😁 I need more speed for sure, idk the real max speed of the falcon, try some speed tests when you get yours 😋
Hey, what do you say about this take on the trifecta for those who don't need super fast or long ranges? Mten4, Falcon, and Extreme. I don't have a wheel yet, but those 3 cover so many use cases, that I think they are a strong combination.
I have the mTen mini, just to learn and my last mile commute to my office. But the low speed limit/tilt back makes me want to upgrade (like you mentioned). Should I save up for the Falcon, worth the extra over the mTen 4? I most value the portability aspect of the EUC, and why I got into this sport vs scooter/skateboard.
Please wait for my mten5 video 😅 the mten4 is absolutely perfect. I use it over my falcon when I need portability. Taking the falcon out is more troublesome than the small mten4.... but the mten4 is still smaller than the falcon... with more power than the falcon 😅
ohhh, can't wait to see the mten5 video! And thanks, good to know the mten 4 trumps the falcon even with the suspension! Keep up the great videos, always love the background music!
I'm on the train headed back home from hanging with the Begode team last night. I'll try and edit it today, can probably post within 25 hours. I crashed hard on the et-max 😂 my butt is all roadrash. Sitting on the train sucks 😅@@Corn8Bit
@@TheBergMan Lol sorry to hear about the crash, road rash really sucks! Glad you didn't get seriously injured though, the ET Max is a beast. Looking forward to the new video!
First thing I needed to add was padding along the top, side edges where your shin will push against the wheel to mount and dismount. I bought some thick, edge guard padding (for babies in the house around tables and corners and such) and put that on there... worked like a charm!
I couldn't get use to its squirrely nature. My V8f is stable at speed and smoother over uneven road surfaces, a common occurrence here in London. I think the Falcon might be a better choice for me.
@@TheBergMan Just be careful. 700km on my 300wh model. I am a bit heavy at 220lbs but I feel I ride pretty smooth and conservatively. I fell immediately and got the worst injuries in riding over 40,000km on EUC’s. Didn’t help I wasn’t wearing any gear. Really worried about axles now.
@@Kekafuch I've seen too many pics of broken axles and pedals. Unfortunately you can't trust euc makers to use quality metals on a consistent basis. Only from Leaperkim I haven't heard of broken axles of pedals. They really need to step up their game. It's just unacceptable.
it cool but it cost way too much bro not alot of people that have money to offer 1 i thought that cost 400 but is not cost like 1k over 1k cost way too much
I was of the same mindset. In 2021, I would binge watch people riding these machines and I wanted one so badly! But yea, they were too expensive. 2023, I was finally able to buy one. Looking for used is also an option
3 hours worth of riding and a 1000w motor all in a small vehicle is really not that expensive for 1000,-. But you could get a V8s for less. Also keep in mind that scooters / mopeds are made 10000s of units at a time. Whereas for eucs they have to do all the design and building for much smaller batches. Compare small series furniture with ikea. Of course Ikea is cheaper.
Please subscribe! My channel is in its infancy and needs your help! 😂
Mten4 and 18XL owner here, I have my Falcon preorder in a few months back as well to slot in-between what I have, looking forward to more content on that wheel - I'm still torn with what tire to get. I love the silence of street tires but I'm leaning more towards the knobby for wet roads and occasional unpaved scenarios.
Street tire really is nice for street riding... but the knobby can do both. It's a bit more practical for me
Could you puy links to the pads and cool stuff on your wheel? Love the video.
Great video, you are putting it to good use, getting the max out of it.
The torque comes from the small diameter. That makes it so eager to accelerate.
I don't think bigger wheels can match that unless they have much more power. But for that power the motor will also be bigger, thus slower to get moving.
Parabéns pelo vídeo. Eu vou comprar um desse MTEN4 e depois que vi o seu vídeo, fiquei mais ansioso para chegar logo.
Got an mten4 as my first wheel.
I had lots of fun and got really good at riding it, and was pretty good at falling with it early on.
I accelerated fast to show off a bit, also because since I wasn't alone, I could finally see how fast I can accelerate without beeps. It cutout at around 25 rifht after a few beepa and i slammed and broke my radius at the elbow with no insurance. Almost ruined my whole life but I want another one 😔
@@jimbojerry596 dude, calm down on these machines a little bit 😆 they're dangerous as heck hahaha
I got the Begode Falcon for my kid. Yes it's slightly more expensive but you can't beat having a suspension wheel and for his weight it's a perfect fit. For my size I'm really loving the Inmotion V14.
cool video mate im getting my mten4 back out soon :P
Thanks for this video! I love my mten 4. Excited to hear you are getting the falcon! Looking forward to getting your take on it. Definitely on my list of desired wheels at the moment.
Yea man! I'm super pumped! Hope the suspension isn't noisy...
you can put some griptape on the nubby foot pedals and they are alot more enjoyable. I also bought an MTEN4 when they first came out, very capable little wheel, if you take care with it.
Honestly... I was a bit too rough with my mten4 and bent the axle 😅 I was riding straight off 4 foot ledges, man 😆
@@TheBergMan lol, I hear ya. My homie bought mine, and he rolled over some clothes in his basement and burned out the motor controller so had to replace it. they are wiched fun toys. way more fun than the mini!
mten4 is a great little wheel , i love riding it. It's just so nimble and playful, so fun !
It really is!
I made custom pads using eva yoga blocks for my Mten4 haha.. But it made a big difference for me...
I'll be waiting to see your begode falcon review, maybe it will be my next wheel, or maybe I get an used T4 😁
I need more speed for sure, idk the real max speed of the falcon, try some speed tests when you get yours 😋
I'll definitely test it's speed and torque. I'm very curious about the falcon's true capabilities
Hey, what do you say about this take on the trifecta for those who don't need super fast or long ranges? Mten4, Falcon, and Extreme. I don't have a wheel yet, but those 3 cover so many use cases, that I think they are a strong combination.
@@segundacuenta726 if I wasn't quite on a budget... I'd go mten5, extreme, and Blitz/master(et max, but it's too heavy more my use case)
@@TheBergMan I wanna see someone showing they only use a Mten Mini and a Master Pro LOL. Both extremes.
@@segundacuenta726 😆 😆
Do you have a drone flying around you? Are you controlling it too? Gosh it must feel incredible riding around with such control
@@slayerspam it's an insta360 camera on a stick haha no drone
I have the mTen mini, just to learn and my last mile commute to my office. But the low speed limit/tilt back makes me want to upgrade (like you mentioned). Should I save up for the Falcon, worth the extra over the mTen 4? I most value the portability aspect of the EUC, and why I got into this sport vs scooter/skateboard.
Please wait for my mten5 video 😅 the mten4 is absolutely perfect. I use it over my falcon when I need portability. Taking the falcon out is more troublesome than the small mten4.... but the mten4 is still smaller than the falcon... with more power than the falcon 😅
ohhh, can't wait to see the mten5 video! And thanks, good to know the mten 4 trumps the falcon even with the suspension!
Keep up the great videos, always love the background music!
When will the mten5 vid drop? I ordered it and can't wait 😁 @@TheBergMan
I'm on the train headed back home from hanging with the Begode team last night. I'll try and edit it today, can probably post within 25 hours. I crashed hard on the et-max 😂 my butt is all roadrash. Sitting on the train sucks 😅@@Corn8Bit
@@TheBergMan Lol sorry to hear about the crash, road rash really sucks! Glad you didn't get seriously injured though, the ET Max is a beast. Looking forward to the new video!
Could you list the extras / mods you did?
I thought EUCs would be cheaper in China since you can buy direct. I bought my Mten4 for around same price here in the states.
It was only a bit cheaper since I didn't need to go through a distributor
great video, my mten4 arrives next week cant wait
First thing I needed to add was padding along the top, side edges where your shin will push against the wheel to mount and dismount. I bought some thick, edge guard padding (for babies in the house around tables and corners and such) and put that on there... worked like a charm!
Cheers I’ve got the grizzla kit already just need the wheel
I couldn't get use to its squirrely nature. My V8f is stable at speed and smoother over uneven road surfaces, a common occurrence here in London. I think the Falcon might be a better choice for me.
It definitely is squirrely! There's not much height to this machine to help that. Keep an eye out for the falcon video!
seems like the right pedal is bent downwards? Or maybe you bent the little pencil axle?
Doesn't feel off... but totally possible the way I treat this thing 😆
Shreddin dude
Personally I would pick the new motherboard version of the A2 due to the waterproofing.
Falcon will have a 6.2 waterproof rating or so. 6.2? Hope that's right
Claptrap going hard right here
Have they improved the axle ? Mine snapped going down a small curb.
I would imagine so.... I go down a few curbs in this video and it's all good
@@TheBergMan Just be careful. 700km on my 300wh model. I am a bit heavy at 220lbs but I feel I ride pretty smooth and conservatively. I fell immediately and got the worst injuries in riding over 40,000km on EUC’s. Didn’t help I wasn’t wearing any gear. Really worried about axles now.
@@Kekafuch I've seen too many pics of broken axles and pedals. Unfortunately you can't trust euc makers to use quality metals on a consistent basis. Only from Leaperkim I haven't heard of broken axles of pedals.
They really need to step up their game. It's just unacceptable.
Damm your‘e ripping with that thing 😂😂😍
It shreds, homie! Ain't just a kiddie wheel 😅
🎉🎉🎉
Begode falcon????
I'll have it this week and will upload a video on it shortly after
it cool but it cost way too much bro not alot of people that have money to offer 1 i thought that cost 400 but is not cost like 1k over 1k cost way too much
I was of the same mindset. In 2021, I would binge watch people riding these machines and I wanted one so badly! But yea, they were too expensive. 2023, I was finally able to buy one. Looking for used is also an option
Yeah I agree. You can get a used scooter for the same prices. And they can carry two
@@TheBergMan I like to compare it to a onewheel. GT performance for less than half the cost
3 hours worth of riding and a 1000w motor all in a small vehicle is really not that expensive for 1000,-.
But you could get a V8s for less.
Also keep in mind that scooters / mopeds are made 10000s of units at a time. Whereas for eucs they have to do all the design and building for much smaller batches.
Compare small series furniture with ikea. Of course Ikea is cheaper.