Center Console Heat Shield Installation Trying to keep some of the heat out! Heat Shield Mat: amzn.to/37LbBfC Heat Shield Tape: amzn.to/3APDOi5 Heat Sheath: amzn.to/3g7YR7k Have a blessed everyday and stay RZR focused!
The polaris factory tool kit has a pair of pliers that are for pulling out the plastic darts. Look at your tool kit and check out the pliers. look at the tips carefully they have little slots in the teeth to pull out the darts l. They work really well!!!
That’s a good idea, if your area is cold like myself in Manitoba Canada,it nice to have heat, there is also Tusk heated seats if you desire, keep up the videos I have the same machine had it three days
Thanks for joining us on our adventure! Make sure you like and subscribe. I’m sure those heated seats are nice. Have a blessed everyday and stay rzr focused!
That is a very cool idea, I hope it worked out for you. I am in Arizona and was out for a ride a couple of weeks ago and found that my insulated bottle was hot to the touch. I had my bottle under the armrest, so I hope this works for me. Daytime temp was about mid 60's.
The difference is amazing. Definitely worth doing. Thank you for joining us on our adventure! Make sure you like and subscribe. Have a blessed everyday and stay rzr focused!
I’m impressed how well it works. Thank you for joining us on our adventure! Make sure you like and subscribe. Have a blessed everyday and stay rzr focused!
Thanks! Yes it has been working wonderful it has made a huge difference in the temperature of the consul area. Insulating the hoses would probably help to however I think that would require too much work lol. Thank you for joining us on our adventure! Make sure you like and subscribe. Have a blessed everyday and stay rzr focused!
Hey guys I just wanna say great videos videos I did subscribe and I did like and I'm following you all steps of the way I have a 1000 S trail And I'm planning on doing some of your mods myself
I have the 2023 1000 trail s and it is NOISY. Have you any ideas on noise reduction. Ive stuffed blankets behind the seats but didn't help .We do use ear plugs .Love your channel ✝️
Hello and yes they are a little noisy. Unfortunately that is the nature of the machine. We have actually been thinking about utilizing some Cardo headphones that would work with my motorcycle communication as well as side by side. Stay tuned.
You made a mistake putting the shifter rubber cover back in, one lap gos inside the plastic and the rest are out, so if you ever open that up again put one flap back inside.
Now that you have had the heat shield installed for 9 months. has the adhesive on the roll out heat shield held up and the glue not let go due to the heat. Has the tape adhesive held up? Overall would you use the same products?
We have not noticed that it has failed in any way. The heat shield tape has worked well so far! Thank you for joining us on our adventure! Make sure you like and subscribe. Have a blessed everyday and stay rzr focused!
I did the exact thing to mine, helped a little still hot. I’m thinking about doing the fire wall behind seats, and trying to find a foam to fill any holes coming thru firewall I also wonder if we added a few more holes in the skid plate for more air! Thanks for video
Ill say, you do things the right way. Our Xp1000 gets hot there as well but I hope it helps with winter riding haha I see the welding table are you a welder also?
www.amazon.com/gp/product/B08GG3RPYL/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1. Thank you for joining us on our adventure! Make sure you like and subscribe. Have a blessed everyday and stay rzr focused!
The rear camera came from the factory. We only installed the front camera. Make sure you like and subscribe. Have a blessed every day and stay rzr focus!
So far I’m really liking it it does make a difference. Will have a video of that up soon. I use the 1 inch diameter of the sheath The link to the item is in the description. Have a blessed every day and stay rzr focused!
Yes it works! I would highly recommend anyone to do this. The difference is night and day. Thanks for joining us on our adventure. Make sure you like and subscribe. Have a blessed everyday and stay rzr focused!
I make my own coffee on the trail in the cup holder
😂😂😂Thank you for joining us on our adventure! Make sure you like and subscribe. Have a blessed everyday and stay rzr focused!
Good video, I use my cup holder to keep my coffee warm.
Lol. Never thought of it as a coffee warmer. Have a blessed everyday and stay rzr focused!
On a really hot day I recommend (keep smiling) door latch extensions help greatly they hold door open like a inch keep the air moving thru the cab!
That is great advice! We will have to check them out. Remember to like and subscribe. Have a blessed every day and stay rzr focused
Look forward to hearing how this works out for you. I have the same machine on order arriving late October. Great videos and ideas!
Thank you for joining us on our adventure. Remember to like and subscribe. Have a blessed every day and stay rzr focused
The polaris factory tool kit has a pair of pliers that are for pulling out the plastic darts. Look at your tool kit and check out the pliers. look at the tips carefully they have little slots in the teeth to pull out the darts l. They work really well!!!
Thanks I’ll take a look! Thank you for joining us on our adventure! Make sure you like and subscribe. Have a blessed everyday and stay rzr focused!
That’s a good idea, if your area is cold like myself in Manitoba Canada,it nice to have heat, there is also Tusk heated seats if you desire, keep up the videos I have the same machine had it three days
Thanks for joining us on our adventure! Make sure you like and subscribe. I’m sure those heated seats are nice. Have a blessed everyday and stay rzr focused!
That is a very cool idea, I hope it worked out for you. I am in Arizona and was out for a ride a couple of weeks ago and found that my insulated bottle was hot to the touch. I had my bottle under the armrest, so I hope this works for me. Daytime temp was about mid 60's.
The difference is amazing. Definitely worth doing. Thank you for joining us on our adventure! Make sure you like and subscribe. Have a blessed everyday and stay rzr focused!
I’m going to use the 1/4” insulation with the foil backing
I’m impressed how well it works. Thank you for joining us on our adventure! Make sure you like and subscribe. Have a blessed everyday and stay rzr focused!
I already wrapped the heater lines w pipe Insulation ,didn't make much difference the heat come up through the shifter🔥🔥🔥🔥
Hummm this has definitely helped on our end
Great Idea, hope it worked. I was thinking the radiator hoses could use the sheath around them as well. Be a lot of work though
Thanks! Yes it has been working wonderful it has made a huge difference in the temperature of the consul area. Insulating the hoses would probably help to however I think that would require too much work lol. Thank you for joining us on our adventure! Make sure you like and subscribe. Have a blessed everyday and stay rzr focused!
Hey guys I just wanna say great videos videos I did subscribe and I did like and I'm following you all steps of the way I have a 1000 S trail And I'm planning on doing some of your mods myself
Congratulations and Thank you for joining us on our adventure. Have a blessed everyday and stay rzr focused!
This is a great idea ! I have the same machine and have the same problem.
Glad we could help! Make sure you like and subscribe. Have a blessed every day and stay rzr focused!
I purchased a roll of "REFLEX " at LOWE'S been waiting to disassemble the brand new 2024🤦Maverick Turbo RR 🤦to heat shield the interior,
It makes a very significant difference
I have the 2023 1000 trail s and it is NOISY. Have you any ideas on noise reduction. Ive stuffed blankets behind the seats but didn't help .We do use ear plugs .Love your channel ✝️
Hello and yes they are a little noisy. Unfortunately that is the nature of the machine. We have actually been thinking about utilizing some Cardo headphones that would work with my motorcycle communication as well as side by side. Stay tuned.
@@rzr.focusedI'll stay tuned , thanks !
ive done this to mine it helps alot
Awesome Thank you for joining us on our adventure! Make sure you like and subscribe. Have a blessed everyday and stay rzr focused!
You made a mistake putting the shifter rubber cover back in, one lap gos inside the plastic and the rest are out, so if you ever open that up again put one flap back inside.
Yes, we caught that and change it in the next video. Learning as we go.
@@rzr.focused we are only humans, and that's why we have this community on youtube, to help each other.
always take the ground off first!
Thank you ! Good advice. Thank you for joining us on our adventure! Make sure you like and subscribe. Have a blessed everyday and stay rzr focused!
Now that you have had the heat shield installed for 9 months. has the adhesive on the roll out heat shield held up and the glue not let go due to the heat. Has the tape adhesive held up? Overall would you use the same products?
We have not noticed that it has failed in any way. The heat shield tape has worked well so far! Thank you for joining us on our adventure! Make sure you like and subscribe. Have a blessed everyday and stay rzr focused!
I did the exact thing to mine, helped a little still hot. I’m thinking about doing the fire wall behind seats, and trying to find a foam to fill any holes coming thru firewall
I also wonder if we added a few more holes in the skid plate for more air!
Thanks for video
Great suggestions. I’ll have to get some of those a try. Have a blessed everyday and stay rzr focused!
Ill say, you do things the right way. Our Xp1000 gets hot there as well but I hope it helps with winter riding haha I see the welding table are you a welder also?
Lol. Thank you for joining us on our adventure. Remember to like and subscribe. Have a blessed every day and stay rzr focused
God bless! Where you guys out of? I’m over here in Pa I own a rocks n trails sxs.
Thank you for joining us on our adventure. We are out of North Carolina. Remember to like and subscribe. Have a blessed every day and stay rzr focused
Where did you get sticky foil paper for the console
www.amazon.com/gp/product/B08GG3RPYL/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1. Thank you for joining us on our adventure! Make sure you like and subscribe. Have a blessed everyday and stay rzr focused!
I have the same machine and the same problem. Did this installation make a difference that you could notice?
Yes it has made a huge difference. Well worth it! Make sure you like and subscribe. Have a blessed everyday and stay rzr focused!
@@rzr.focused thank you! I am subscribed. 😉
I see you have listen your heat shield tube as 1 inch is this correct it looks much bigger than that .
Yes sir. The link is the actual one I ordered and the one you see on the video for the winch cable. Have a blessed everyday and stay rzr focused!
Thanks 😊
Need to do this on my 900. Let me know how it works
We sure well. Thanks for joining us on our adventure. Make sure you like and subscribe. Have a blessed every day and stay rzr focused!
Have you checked out the heat shield
Yes we will be posting a video soon. I would definitely recommend doing this mid. Have a blessed everyday and stay rzr focused!
Question on rear camera cord extension, where'd you get it?
The rear camera came from the factory. We only installed the front camera. Make sure you like and subscribe. Have a blessed every day and stay rzr focus!
@@rzr.focused I thought you had got an extension for that cord because of the spare tire carrier? Maybe I'm confusing you with another TH-camr
Probably a good idea if possible to lower the camera however we just tilted the tire and it seem to work OK
What size heat shield shief tube did you use diameter? And how is the heat shield matting working out?
So far I’m really liking it it does make a difference. Will have a video of that up soon. I use the 1 inch diameter of the sheath The link to the item is in the description. Have a blessed every day and stay rzr focused!
Did the heat shield work
Yes it works! I would highly recommend anyone to do this. The difference is night and day. Thanks for joining us on our adventure. Make sure you like and subscribe. Have a blessed everyday and stay rzr focused!
1000 degree coffee is good on a 100 degree day 🤦🤦🤦🤦🤦
😂😂😂