ขนาดวิดีโอ: 1280 X 720853 X 480640 X 360
แสดงแผงควบคุมโปรแกรมเล่น
เล่นอัตโนมัติ
เล่นใหม่
Please provide the link to buy the bold ....searching everywhere but couldn't find...awesome job you have done
You can get it from any local hardware shop bro. I'll also try to provide a link.
İ made it. it works good but i find bit strong vibration on screw. i hope that screw and screw slot is strong enought.. is your still ok??
Hey, mine still works good. Hope yours will work too!
@@exhaust_tales yes bro its perfectly work. i hope that scew and slot last long.. thx.
Awesome 🥰
Aren’t you supposed to block the oil feed to the hydraulic tensioner?Aren’t you going to loose oil pressure?
Yes, the tightening nut outside ensures that there's no air gap!
could i put a stiff spring after the two nuts ?
Yes you can, but the purpose is to not have any kind of movement to the bolt. So I don't think it will make much difference if you add one.
@@exhaust_tales thank you , i was curious :)
Welcome 😇
Bro I Installed mcct but I have a doute is bike became more heat and the cooling time also takes time or what
Bro, this does not have anything related to the heat of the engine. Please check the coolant and radiator fan.
Cbr250r front sprocket 13th 14th alternative ather bike sprocket undo bro
I'll check bro.
Very useful trick bro
Thank you bro 🥰
Ningal cheyyina videos cbr owners nu very usful broCbr250r parts kittanilla bro
Big thanks bro.
You are welcome!
Brother make a video regarding tickling noise of cbr 250 which is related to shims
Yes brother. Definitely 👍🏼
@@exhaust_tales looking forward... My bike hai that tickling noise and the service centre is saying it will take 14 to 15k for that i
@@121RipSasuke same for me bro now m facing this issue
why do we put nuts inside, do we have to ??
It is to lock the bolt and to reduce movement.
Machane ഞൻ ഒരു 3 തവണ മാറ്റി മടുത്തു 😁ഇതു ചെയിതു നോക്കട്ടെ 💫
Set aakku... പെവർ വരട്ടെ 😁🔥
@@exhaust_tales 💥
Thnx Broo
You are welcome bro!
I am sick of this problem on my CRF250L.
Of course it is a headache!
@@exhaust_tales I have tried it and it worked. Is it calibration really important?
@NotechinusV it should be fine if engine is running freely.
@ that m6 allen 80mm bolt is near impossible to find in Turkey. Toolshed says if allen its allen bolt it will eventually break the bolt. The bolt is vulnerable toolshed said. How do do you find it? How much kilometre you guys drove with cct?
Bro Ernakulam aano. Insta ID tharamo ?
Hi bro, athe. Insta ID the_exhaust_guy
Please provide the link to buy the bold ....searching everywhere but couldn't find...awesome job you have done
You can get it from any local hardware shop bro. I'll also try to provide a link.
İ made it. it works good but i find bit strong vibration on screw. i hope that screw and screw slot is strong enought.. is your still ok??
Hey, mine still works good. Hope yours will work too!
@@exhaust_tales yes bro its perfectly work. i hope that scew and slot last long.. thx.
Awesome 🥰
Aren’t you supposed to block the oil feed to the hydraulic tensioner?
Aren’t you going to loose oil pressure?
Yes, the tightening nut outside ensures that there's no air gap!
could i put a stiff spring after the two nuts ?
Yes you can, but the purpose is to not have any kind of movement to the bolt. So I don't think it will make much difference if you add one.
@@exhaust_tales thank you , i was curious :)
Welcome 😇
Bro I Installed mcct but I have a doute is bike became more heat and the cooling time also takes time or what
Bro, this does not have anything related to the heat of the engine. Please check the coolant and radiator fan.
Cbr250r front sprocket 13th
14th alternative ather bike sprocket undo bro
I'll check bro.
Very useful trick bro
Thank you bro 🥰
Ningal cheyyina videos cbr owners nu very usful bro
Cbr250r parts kittanilla bro
Big thanks bro.
You are welcome!
Brother make a video regarding tickling noise of cbr 250 which is related to shims
Yes brother. Definitely 👍🏼
@@exhaust_tales looking forward... My bike hai that tickling noise and the service centre is saying it will take 14 to 15k for that i
@@121RipSasuke same for me bro now m facing this issue
why do we put nuts inside, do we have to ??
It is to lock the bolt and to reduce movement.
Machane ഞൻ ഒരു 3 തവണ മാറ്റി മടുത്തു 😁ഇതു ചെയിതു നോക്കട്ടെ 💫
Set aakku... പെവർ വരട്ടെ 😁🔥
@@exhaust_tales 💥
Thnx Broo
You are welcome bro!
I am sick of this problem on my CRF250L.
Of course it is a headache!
@@exhaust_tales I have tried it and it worked. Is it calibration really important?
@NotechinusV it should be fine if engine is running freely.
@ that m6 allen 80mm bolt is near impossible to find in Turkey. Toolshed says if allen its allen bolt it will eventually break the bolt. The bolt is vulnerable toolshed said. How do do you find it? How much kilometre you guys drove with cct?
Bro Ernakulam aano. Insta ID tharamo ?
Hi bro, athe. Insta ID the_exhaust_guy