Hero S8 & Hero S9 Scooter display/throttle operation settings
ฝัง
- เผยแพร่เมื่อ 1 ต.ค. 2024
- THANKS FOR WATCHING! SUBSCRIBE AND BE NOTIFIED ON OUR NEXT VIDEOS 😊
🛠 DISPLAY/LCD GUIDE FOR OPERATION AND SETTINGS
OPERATION
1) To turn on the display, press power button for three seconds
2) To turn on the lights, press mode for three seconds
3) To check the trip made from turning the unit on and actual battery voltage, press power button once, and twice respectively
4) To switch gear, press mode button to toggle from Gear 1 to 3, note that we have DC Motor prime mover so the Gear does not have an impact for the acceleration, there are just corresponding maximum speed pre-set on each Gear.
SETTINGS
• To access settings, press the power and mode button simultaneously until the P-settings come up)
• To switch to the next P-setting press the power button, to adjust/change the values press the mode button
ITEMS INSIDE THE PARENTHESES ARE THE VALUES FOR EACH SETTING
P1: LCD brightness (Set from 1 to 3, highest value as the brightest default is 3)
P2: Unit of distance, choose your preference (Kilometers/Miles default is Kilometers)
P3: Voltage (S8/ S9 = 48V DEFAULT DO NOT CHANGE)
P4: Hibernation timer - the inactivity duration where the display automatically shutdown the scooter (Adjustable according to user preference, default is 5 mins)
P5: UNUSED
P6: Wheel diameter ( S8 = 8 , S9 = 8.5 DEFAULT DO NOT CHANGE)
P7: Number of magnets on the motor (S8/ S9 = 30 DEFAULT DO NOT CHANGE)
P8: Power limitation (S8/ S9 = 100% DEFAULT DO NOT CHANGE)
P9: Start mode ( 0 - Zero Start, 1 - Kick Start, default is 0)
P10: UNUSED
P11: Electronic breaking (1-5, 1 as lowest and 5 as highest break resistance, default is 3 RECOMMENDED NOT TO BE CHANGED)
P12: Motor acceleration (1-5, 1 as lowest, and 5 as highest, this setting is user preference, should you wish to have faster takeoff, opt to use 5, if you prefer a smooth acceleration, use 1, default is 3)
P13: UNUSED
P14: UNUSED
P15: Cut off voltage - (S8/S9 = 41V DEFAULT DO NOT CHANGE)
P16: Odometer reset - applicable for small mileage only
P17: Cruise control (0 is OFF, 1 is ON, maintain speed and throttle for 10 seconds to automatically activate - DISABLED FOR FIRST & SECOND BATCH SCOOTERS NOT RECOMMENDED TO BE USED)
P18: UNUSED
P19: UNUSED
P20: UNUSED
#HeroS8 #HeroS9 #Scootersetting #scooterreview #Zero #Zero9 #Zero10
![[Live] ศึกมหึมันส์มวยไทยสังเวียนเดือด เวทีมวยชั่วคราวสวนสยาม | จันทร์ 30 กันยายน 2567](http://i.ytimg.com/vi/pM1k6f7JXUc/mqdefault.jpg)
How do I reset the controller to factory settings?
P15 hero x8 40.41.42v ??? Someone has sabotaged the settings help me pleas 🙏
I Friends Can you help me . I would to reste m'y scooter. Motus 8 pro lite . How Can Do . TH-cam dont have a vidéo for me
why is it not recommended to change the voltage (p3 setting), what should i keep in mind if i want to change it what are the tradeoffs,
for me personally i use the s9 mainly to go to and back from work, i chose the hero coz it had the most balanced specifications for what i needed since i m weigh 125kg and a normal scooter (25km/h speed)would get me killed in the roads of greece, my only complaint is the time it takes to accelerate so i was wondering how the p3 setting will affect this, i hate ramping up people behind me and a trucker tried to kill me once already for this, i was checking the settings i already changed the acceleration setting to 5 haven't tried it yet, it might be enough by itself, will changing the volts wreck my battery
and p5 will give you five speeds and p19 will give you a zero gear so you can park it and noone will beable to go unless they change the gear
Setting hero x8 please 🙏
THERE IS TRIAIGNLE NOW IN METER ,,NOT RUNNING
P8 for what please??
No key?
Thanx for the video brother..I replaced the battery for my scooter and the display is not reading that the battery is full....tested battery output..tested output from bms with different meters and it shows 58V but my display only shows 56V and capacity only shows 50%..Thank You
Who can tell me what the code is in Zero 8? Before reaching the settings ..
Electric scooter dashboard I could not turn it off. What is the problem
Very thorough video bro.And very helpfull.Good job
hello what’s the app called to control the lights on hero S8?
I have no.power where is the main fuse
Paano po e set up sa cruise control hero s8.
Thank you very much
very helpful thanks
Good day po sir. Tanung ko lng po anu ba ma payu nyo sa akin about p15. Kc 60v yung scooter ko anu ba mangandang cut off para d ma sira battery ko
Probably 52V, but check with your dealer/manufacturer, assume that every battery have different requirements. It is better this way.
Clear & nice!
Thanks. It helps.
Hey thanks. And what does the A stand for?
Hey man, I missed this. We do not know what "A" means as well but if you long press power button you will notice that it will be changed into "d". Operations wise, if you will press the mode button for change the parameter when it is in "A" the parameter increases, while at "d" it decreases.
very helpful thanks for the upload.
Happy to help mate
got S9 and it has P0 to P9 only, it seems having different configuration from S8 you have
You might have the first gen scooter displays, you can check the SR.NO. if it is QS-S4
@@urbanhacksqa716 where to check?
@marvin gonzales amigo disculpa. Ya averiguaste los datos de esta s9?
How do you reset the trip meter?
It is applicable to low ODO like probably 1-10kms, I bet it was intended for testing purpose where the scooters are typically run for the said distance
Thanks my Friend, it helped a lot.
Happy to help :)
@@urbanhacksqa716 hero x8 please p15 voltage 40.41.42 ??? Please help me
Just what to ask about the battery display if full charger it will show you the display level is full or same in the video but. How we will know 100% full charge. Thanks
The charger tells you that it is 100% full via LED Indicator turning green, the display on the other hand shows your battery voltage.
If you had issues where the charger indicates full charge, you have to revisit your P-setting for the battery voltage if it matches.