@Mark Johnson Thank you for this demonstration. I understood a lot of it but I got lost toward the end where you began discussing 100%. I really want to understand. At the beginning, you said you originally used the value of 10 so the robot wouldn't go crazy. What did you mean by "crazy"? Malfunction or just so it wouldn't drive off your video screen? When I practice for competition would I go back to the code and change 10 and -10 to 100 and -100 so that my robot will go full speed? Or do I always use the #10? Thank you for your patience with me.
I think you got it. Are you talking about when I wasn’t programming the controller? What you said sounds right. The joysticks on the controller will set the value from -100 to 100. Send me an email mark@mjstem.com and we can go back and forth so I can help you more specifically.
hi! we have chosen to build an x-drive, and i was wondering if you knew of any resources that would help us code 'move to point', or a strafe turn function?
Are you possibly available for some questions/consulting? I am building my first robot from scratch and learning everything on my own time as I go. I need somebody that has some knowledge to tell me if what I’m doing and will try to do is stupid or not and what would be better routes to take to achieve my goal. Can compensate or what not if I take up much of your time.
this was really helpful, especially since stephens tutorial isn’t for vex v5. thank you!
This helped so much! I could figure it out and then I converted this to code pro. Much appreciated
Glad it helped!
Hey Mark, sincerely appreciate you sharing this info brother. You just picked up another subscriber.
Keep up the great work!!
Awesome!
@Mark Johnson Thank you for this demonstration. I understood a lot of it but I got lost toward the end where you began discussing 100%. I really want to understand. At the beginning, you said you originally used the value of 10 so the robot wouldn't go crazy. What did you mean by "crazy"? Malfunction or just so it wouldn't drive off your video screen? When I practice for competition would I go back to the code and change 10 and -10 to 100 and -100 so that my robot will go full speed? Or do I always use the #10? Thank you for your patience with me.
I think you got it. Are you talking about when I wasn’t programming the controller? What you said sounds right. The joysticks on the controller will set the value from -100 to 100. Send me an email mark@mjstem.com and we can go back and forth so I can help you more specifically.
hi! we have chosen to build an x-drive, and i was wondering if you knew of any resources that would help us code 'move to point', or a strafe turn function?
Sorry for the delayed response. I don't have anything specifically for that... sounds like an interesting video idea. Tell me more :)
thamsk so muc!!!!111!1!!1
Question Would Omni wheels work?
From team 7192F windom MN
Yes. In an X configuration. I demonstrate that in the video. Let me know if you have questions and I’ll help the best I can :)
@@MarkJohnston do they work like on a “H” drive?
@@MarkJohnston or only the mech wheels?
@@alexmendoza1874 no, I do not demonstrate H drive in this video.
@@alexmendoza1874 🤪 did you watch the video? I show an xdrive with IQ parts in the video.
Are you possibly available for some questions/consulting? I am building my first robot from scratch and learning everything on my own time as I go. I need somebody that has some knowledge to tell me if what I’m doing and will try to do is stupid or not and what would be better routes to take to achieve my goal. Can compensate or what not if I take up much of your time.
email me. mark@mjstem.com
@@MarkJohnston Thank you, I copied your email address to a new message if you would like to delete it from here. I will email you later on today.
Sounds good. That is my public email so it can stay :)
@@MarkJohnston finally sent 👍🏻 I look forward to hearing back from you.
16:13
nice
Thanks