Part 2: Th350 Transmission Removal
ฝัง
- เผยแพร่เมื่อ 5 ต.ค. 2024
- Removing the TH350 Transmission from the 1956 Chevy truck in order to install a 700r4 overdrive. Replace the engine oil pan gasket.
Part 1: Prepare to remove th350
• Prep work for TH350 to...
Part 2: th350 removal (this video)
Part 3: Install 700r4
• 700r4 Transmission ins...
Sure hope the jack stands don’t slip off the wood blocks you made when you start pulling the trans.
Thanks for that. I try my best to do things safely. I intentionally only used 3 blocks as the 20 inches is about the minimum to maneuver the trans. The jack stands are not fully extended. I also shook like hell on all four corners of the truck once it was in the air. Perhaps 6x6 blocks under the tires? Always open to suggestions! 4 pole lift on my wish list - just need to convince the wife!!
The danger with the wood is if it splits. With all that weight on the jackstand the stand could act like a chisel/maul.@@edshandymantips4862