I wonder if they’ll sell this again. I remember seeing them on shelves once, but now if you want one, they’re upwards of 150 bucks. Hopefully when infinite comes out I can get one
Do you think Nerf will make another run of these this year before Christmas since the new Halo infinite is coming out this fall? They are sold out everywhere.
Hey man this is an amazing video!!! I am putting my gun back together after painting it and i am having trouble putting a piece back. I don't know where it belongs. Could you help me out?
www.ebay.co.uk/itm/Mini-Outdoor-L2-LED-Clip-EDC-Flashlight-Portable-Hiking-Tiny-3Modes-Torch-Lamp/303769968132?var=602998330707 Doesn't have to be this one, but I bought a lot to find the right sizing. Look at the dimensions on this product and see if you can find one in your country (if you can't get this one). Admittedly yeah I forgot to show how I did it, but it's as you'd expect; use a dremel tool to cut away at the plastic while fitting your torch in, refining over and over till you get something you can close. Don't worry if the cutting doesn't look perfect, people won't care. Secondly a LOT of hot glue, under and around the torch. You really want it to be stuck there.
Yeah that's fair, If I do more I will lower it but after doing 9 of these I'm sorta worn out - hoping 343 commission nerf to make a battle rifle or something.
Just the logos, I really don't think you need to sand the whole thing, just wastes sand paper. Primer will stick with at least 2 coats no problem, but you're always, always going to have chipping issues with the trigger and potentially the end of the barrel (just coming from experience, so primer that bad boy up)
why am i seeing some AR Infinite guns painted with the yellow strip and others with the silver strip towards the front of the gun? is the Yellow not a Reach finish?
Follow my instagram, I post about these guns there more than I ever will here @gt86jack
Bro can you pleaseeeeee make a vid on how to install the light
Bro how much will it cost for you to paint mine
Tried finding you on Instagram but sadly your username didn’t show up
One of the two coolest halo ma40 mods I’ve seen
Cheers!
What I want to know is how you programmed the speaker to have the Halo Reach firing sound because this is fucking amazing!!!!
Incredible. I am definitely gonna try this now.
th-cam.com/video/E9OOw1gDLn0/w-d-xo.html
What flashlight did you use and how did you fit it in?
www.ebay.co.uk/itm/Mini-Outdoor-L2-LED-Clip-EDC-Flashlight-Portable-Hiking-Tiny-3Modes-Torch-Lamp/303769968132?var=602998330707
Dremel and hot glue
congrats on 117 subscribers!
?
Awesome job keep up the good work
I wonder if they’ll sell this again. I remember seeing them on shelves once, but now if you want one, they’re upwards of 150 bucks. Hopefully when infinite comes out I can get one
If you can figure out a shipping method they are $69 (50.69 in usd) on shelves in Australia
its like 52.99 on amazon noww
just picked one up in target aus for $30 on a special
Hello one question how did you print the transparent stickers? I’m trying to add all the accurate halo infinite logos to my ma40
Stickers bought online?
Wuoo that pro!! ¿¿Where can I get those materials to make my rifle look the same?
How can I get a hold of the stickers please
what paints did you use?
best one on youtube
Hey! What kind of flashlight did you use?
just doing the repaint myself! Where did you get the stencils? or the layouts?
if anyone needs them im currently doing all stencilds for the ma40 halo infinite version
according to the wiki the MA37 is 38 inches long, thats 3 ft and 2 inches, i'd like to see someone make that
9:34 how did you do that with the spring??
What sound board did you use?
That's dope dude,
Beautiful
hi, i need the UNSC logo printout. thanks.
You turned the MA40 into an MA37 but still cool
This is very cool
Do you think Nerf will make another run of these this year before Christmas since the new Halo infinite is coming out this fall? They are sold out everywhere.
Try amazon or ebay?
@@haloukprojects9394 Yeah, there's a few and all $100. It's expensive.
Hey man this is an amazing video!!!
I am putting my gun back together after painting it and i am having trouble putting a piece back. I don't know where it belongs. Could you help me out?
you make me sad
Do you take orders to do this lmao, feel like I’d ruin mine
Is it fully functional still?
Can you link the torch you used and how you installed it?
www.ebay.co.uk/itm/Mini-Outdoor-L2-LED-Clip-EDC-Flashlight-Portable-Hiking-Tiny-3Modes-Torch-Lamp/303769968132?var=602998330707
Doesn't have to be this one, but I bought a lot to find the right sizing. Look at the dimensions on this product and see if you can find one in your country (if you can't get this one).
Admittedly yeah I forgot to show how I did it, but it's as you'd expect; use a dremel tool to cut away at the plastic while fitting your torch in, refining over and over till you get something you can close. Don't worry if the cutting doesn't look perfect, people won't care. Secondly a LOT of hot glue, under and around the torch. You really want it to be stuck there.
lets see it fire
Would it be possible to get one commissioned like this one?
Perhaps in the future, I'm in between moving with no place to go to yet lol
How’d you setup the Led in the ammo counter
Stay tuned, I might make another video on this but it's super simple.
How much
Too bad I can't find one anymore as of recent.
Try amazon or ebay
nice job id buy the rifle but i feel like its too much money for me
Yeah that's fair, If I do more I will lower it but after doing 9 of these I'm sorta worn out - hoping 343 commission nerf to make a battle rifle or something.
@@haloukprojects9394 nice
fun fact, ma40 and ma37 are diferent
Bro. You’re not allowed to paint the orange muzzle, you have to keep it orange. It is illegal to paint the muzzle.
Regarding your comment www.reddit.com/r/Nerf/comments/135fzv/regarding_orange_tips/
Booo whooo cry about it, it’s a prop
@@HundredAkers Grammar: 100. Technically, you should say "boo hoo" friggin nine-year-old.
Hey love this video, the assault rifle looks insane. Quick question did you sand the full gun or just the nerf logo ?
Just the logos, I really don't think you need to sand the whole thing, just wastes sand paper. Primer will stick with at least 2 coats no problem, but you're always, always going to have chipping issues with the trigger and potentially the end of the barrel (just coming from experience, so primer that bad boy up)
@@haloukprojects9394 will do! Appreciate you commenting back keep killing it man
@@haloukprojects9394 it’s my older brothers 24th in June so I think this would make for a killer present can’t wait to start
@@isaarif7 I just hit 24 too! If you want me to look over it for additional tips let me know
@@haloukprojects9394 appreciate it, I’m not sure what I want to do but I think I’m going for classic assault rifle look
Nice one, it looks great
How did you do the charging handle as that’s what I wanna do the most?
Bro I don’t even want the lights and sounds I just want the paint job
Whats next, nerf darts that look like bullets?
I hope to see more videos like these
unreal mate
why am i seeing some AR Infinite guns painted with the yellow strip and others with the silver strip towards the front of the gun? is the Yellow not a Reach finish?
Sweet
Please do more
definetly gonna sub after seeing this
Thank you, I don't really plan to upload anything else unless 343 sign for more weapons. It's appreciated though
Where Can I Get That Grip Material, And The Light For The Ammo Count? Very Great Looking Mod To!
Damn! Definitely a underrated channel. You should have more attention and subs.
(btw not sarcastic )
Hhhmmm.... for how much would you paint mine please!?
Wow. I plan on doing something similar to mine. Truly master class, great work.
Hi great work ! what flashligjt is it ?? I can't find one to fit the gun!
Where did you get those damn stickers bro
Custom made
the store
Watched for the gun watched again for the music
This is good stuff man. Subscribed.
I like Halo 4s assault rifle firing sound
Dude that looks sick
Great job
What tools did you use
For which parts?