Even though the video is a bit old, it helped me decide on what equipment to buy the first time around, instead of buying something that doesn't work. The air pump suction cup with a small rig arm also serves multiple purposes. Thanks, David this video really helped me.
What do you guys think? This thing solid enough to mount the A7Siii outside the van?!😬 Also, I feel like the "Watch Until The End Gang" is going to get a smile today🤣
GREAT Vid, David...THIS kind of stuff is so good....i'll bet no one else has stumbled onto this mount....the suction mounts have always gotten me a little scared.....this solves that problem....
I love these videos David! One thing I use for inside of the car shots, I use a small rig mini clamp and use a quarter 20 adapter on the go pro. The mini clamp has a rubberized inside so it doesn’t damage the things to attaches to. As I’m typing this you just started showing the magic arm haha....🤦🏽♂️
@@DavidManningvlog yeah they are so so useful. I got the snap mount because of you though! Hey since I just picked up an insta 360, is there a case or something that has the GoPro style attachment rather than just a quarter 20?
Hey David, is the suction strong enough to deform the metal panels on the van? It kinda reminds me of a dent-puller, so I would just be worried about denting my car door.
I think what keeps that from happening is that the rim of the mount is soft, while the inner bit is firmer and flat. So as it vacuums, the cup flattens out and there's no deformation of the metal. I know the suction pullers that you're talking about and they use a similar style to the PGYTech suction, where in order to create suction, they deform the cup which pulls on the surface. This mount removes the air and flattens the mount against the surface👍
nice! I had my gopro mounted on the hood of my car *with a cheap aftermarket plastic suction cup when I drove through Red Rock Canyon outside of Vegas, it was fine, but I was also driving pretty slow. I wouldn't mount one like that for full speed driving. That unit looks much more secure for sure! nice find!
Yeah, this one I'll have no issue mounting outside my car with the GoPro and being fully confident! The last video was my A7Siii mounted to the side of my van, but I wasn't moving with it. Not sure I'll actually do a driving shot with the A7Siii mounted outside😬
I broke the arm of the Joby mount the second time I used it. It was hard to keep the arm of the Joby mount tight enough to keep it from moving in flight. I opted for RAM mounts and arms. High suction pressure can put a ripple in your car’s hood or fender.
Oh man, then you're going to love the Seasucker! They actually sell a "Camera Mount" version that comes with a RAM mount on there. Which also means that you could put this suction cup anywhere and then use your other RAM mount stuff to mount other things as well👍
@@DavidManningvlog The Seasucker is a beast for sure. I think you’re really onto something with the suction mount and arm combination. RAM arms are solid but hard to get all the angles and needed for complete flexibility. The issue for me in my jet is the windows get very cold in the fight levels so a suction mount that works well at the surface is often no bueno when the glass is -30 degrees. The Seasucker would handle that from what I am seeing.
You might've already done this. But just a suggestion, when I want to test a suction cu, I would mount something to the end of the rig of equal or greater weight than whichever camera I want to test before risking any expensive equipment. Great video I appreciate you showing this.
I use a suction cup on my windshield of my motorcycle.. I’ve been lucky and I’m probably jinxing myself but I’ve never dropped my gopro... yet... the stiff arm I think would be more stable in the wind.(60-70 Mph) ? Anyway thanks great video 👍
I try to to get a lot of driving footage with our VW life videos but I really don't trust those things. I bought the red and white one after you suggested it but I too only mount it inside. I do have the little safety cable that I can attach to but I don't want to lose my gear. A lot of the times I will just hold my GoPro and put it in time warp mode in that works good enough
You have the insta360 one r right? You could use the same setup or do I need a different connector for the smallrig connector? The only thing I would worry about on a more expensive camera (especially a sony a7iii, a7siii, 7c or zv-1) is security... Couldn't someone snatch it while you're sitting at a light or something? Perhaps if it's closer to the windshield or on the roof that might not be so easy but on the roof you couldn't see it of course... Unless you have a sunroof and could put it right there in hands reach?
I have, but I can't find any info on what the pull rating is. It looks like a cool mount, but I still think it would face similar issues as their single mount. The vacuum pump is so key!
Be careful driving with a massive gopro attached to ur windshieldas it can hinder ur visibility by law.In the UK, there is a small area where you are allowed to mount a camera (behind the middle mirror on the left side so u cant see it). If u have an accident, they will void ur insurance, if police stops you they can fine you etc.
Bit late to the party, but the rule is can't encroach beyond 40mm into the sweep of the windscreen wipers. And that's as fitted when sold; you can't just put shorter wipers.
I use the suction mount that came with the Neewer "million and 1 pieces for $30" kit. I also tether it to the kayak, as it does sometimes fall off. But, you know what, it still works and your video didn't talk me into the $60 one, even though that might work better. And a bike to my roof? I don't think so. Just couldn't relax with that. It falls off you wreck the bike, but might also kill someone.
I use Forevercam Magnetic 360 mounts which are small and very strong on the outside of my truck, they've never moved a bit. I enjoy your videos always entertaining.
Thanks for sharing!! I would love to use the SeaSucker Suction Cup outside on my sunroof for my GoPro while going through Utah and Colorado next month but, I'm afraid it could potentially crack the glass pumping it up. What's your thoughts? Thanks again David! 👍
Not necessary with the arm, but also the area to mount on the top is just too small for the arms tightening ring to fit in. So the front face is the only spot for the arm
Thank you for your video. I have a textured dash and the mount I purchased won't stick at all. Have you tested any with this type of dash board cover ? Thanks
Question for you. With putting the suction thing on the outside of your car. What do you do to help make sure that the wind doesn’t tilt your camera away from where you want it?
Hey Dave, you should turn the AC up, chill the inside, put the suction cup on the wind shield and then park it out in the sun, just to see if the button thingy would pop out slowly 😁
Damn you David! First it was the magnetic mounts. Now, I thought I was all set with my suction cup stuff. Sigh, I'll have to get this one too. DAMN YOU. :-D
Hey, David. Did you ever try a bigger camera?? Im getting to cross the Chesapeake Bay Bridge Tunnel with a gopro and came back to revisit your video from a year ago.
where did you get that first attachment thing on the sea sucker mount? (Not the small rig you have linked) I ordered one on amazon and it did not come with it
Probably not. It's 4.5" inches in diameter, so you would need a fairly large flat spot on your helmet to make this work. I rock stickies on my snowboard helmet and I've had two sticky mounts that have stayed on my helmet for three years no problem! Just make sure to clean your helmet well, add the sticky mount, and wait a day or two to mount your GoPro on there👍
The SeaSucker is definitely overkill for this setup... meaning it's definitely going to hold. It'll hold much larger cameras with ease too. I can't vouch for the arm but can for the sucker.
Got an opinion on the official GoPro suction mount? I haven’t had a chance to try it on the outside of my car yet but it seems really strong on the inside of the windshield.
It's so strong you can't actually put the GoPro into the position you want. It's more like a restaurant that puts so much salt on your food that you can't eat it👍
Dude, do not put your big rig on that arm. Maybe the suction will hold, but I will not trust the arm with shock and vibrations. Not worth finding out. Maybe get something that weighs as much as your camera with lens and battery, and attach that first. Just in case. Love your content bro.
I am more interested in that smallrig arm! I need something just like that! Also did you ever try the GoPro suction attachment. I think it works really good, never had itfail on me... but I still tether it just in case lol
I've tried the GoPro suction cup and same issue. It's good until it's not. With all the other cups, you have no indication when they're about to fail or when they're losing suction. With this one, you see the orange well before it ever fails! I'm all in on this mount now!
Yeah, the Snap Mounts work great on the outside of the car WITH the rubber mat bit. The rubber mat adds that extra friction. The issue with magnets is that while they have great pulling strength, they don't have great sliding strength. Meaning that they're not going to fall off your metal surface, but they may slide around on it. So the mat helps with the sliding bit!
Hi David. You really took risks here.. . sold me on this!! ... I totally trust this.. However..still looking for a mount to attach to the mtn bike front or rear Fork... just that most of the mounts attach too close to the spokes. ...Trying to get that shot you know.. super close to the wheel.. and terrain .. any recommendations? ..I don't see you much on mtb ... but am sure you would find a lot of new fans. LOL ( like you need more..!) .I spend more time attaching mounts than actual video cam time. Thanks for this great review.
I’m surprised you don’t just have a GoPro base stuck on your window. I use mine for “dash cam” purposes when driving and just use the slide clip to take on & off. Nice sucker though :)
@@DavidManningvlog well best value option is ender 3 wich you can buy for 200 gbp filament 1kg cost 20gbp ... and it will takes month for you to finish it :) i am working now on gopro timelapse rotator and gopro camera portable slide
I've been looking to try to get that same shot but don't trust any mounts for my GoPro. Was thinking maybe SnapMounts would work for GoPro, thoughts? And what could I use to get a normal shot, cause Snap Mounts could only be mounted with the GoPro shooting in vertical mode
They have it on their site being used a surf rack, BUT I can't imagine putting that much suction on my fiberglass surfboard deck. If I were you, I would go with the stick on GoPro mount with the secondary safety line piece gopro.com/en/us/shop/mounts-accessories/surfboard-camera-mounts/ASURF-001.html
I would totally trust that arm with a GoPro9 or even a bigger camera... what I wouldn't trust is a flimsey arm to hold it! What's the strength rating on that magic arm??
Why not just tether the camera? Lots of spots to tie to on the van and in spots you cant buy a second suction mount and tether to that. Then you have zero worries.
Tethering is cool, until you have to rely on that tether and the gopro goes bouncing off your paint at 65mph😬 I would rather use a solid arm like a friction arm to tether to another suction mount. So if the main mount fails, it will still stay in place and not swing and bounce around👍
Welcome to seasucker! Cyclists have known about it for a while. You can trust the mount with your big camera, I would be more concerned about the arm. The "hey babe" line right at the very end made me laugh so hard! 🤣🤣
David. Great Video! quick question if you dont mind. I sent my gopro hero 9 in for warranty repair over a month ago and i am being stonewalled by gopro's support. I can't get an answer from them about when I might see my product again. I have used their support phone system and chat system half a dozen times, still nothing. Any recommendations? Thanks. Keep the incredible content coming.
Make a rig with a couple of them, spread the load and build in redundancy. One of my cars had a pro photo shoot and they guy was using two and three of these for the different angles
Hi David! I know you have talked about Snap Mounts in the past. Someone else has recommended those for mounting GoPro on the car exterior. What are your thoughts on Snap Mount vs suction mount for this?
Hi David was wondering what mount you recommend to use on the inside dash of a car? The one i have now is the pgytech but doesnt stay on the dash without falling after about 5 minutes Are there any that you'd recommend on that type of surface?
One of the most important things in life is the ability to "crack yourself up". You have it. I have it too. Strong character quality! #Attaguy I had the Joby suction mount on my wish list. Never got it. Added the Joby to the wish list... taking them both off the list now and adding this bad boy. Also, I finally got my "Try Hard, Take chances" shirt today !
Do you trust the Snapmount to hold your GoPro on the outside of your vehicle? I tested it the other date but didn't go very far or very fast... LOL - "It's non toxic... water based...hey babe!" hehehe!
Even though the video is a bit old, it helped me decide on what equipment to buy the first time around, instead of buying something that doesn't work. The air pump suction cup with a small rig arm also serves multiple purposes. Thanks, David this video really helped me.
What do you guys think? This thing solid enough to mount the A7Siii outside the van?!😬 Also, I feel like the "Watch Until The End Gang" is going to get a smile today🤣
its prety good
@Savixs 62 Hahaha! No chance the PGYTech would hold the A7Siii🤣
Idk feeling froggy like you wanna do it?!?! Hahahaha I’d love to see it
@@GaryCantrell I waaaaant to do it, but man that's a risk!😬
@Savixs 62 Fixes everything🙌
GREAT Vid, David...THIS kind of stuff is so good....i'll bet no one else has stumbled onto this mount....the suction mounts have always gotten me a little scared.....this solves that problem....
Thanks David! Yeah, this thing is crazy strong! I for sure have no problem now mounting the GoPro outside my van!
Dave, You should look at the "3 Footed Monster" a small magnetic mount from Australia. Can hold GoPros/small DSLRs/LED lights/small vid monitors.
This video made me smile! You’re making me want to pick up another GoPro for multiple angles!
I love these videos David! One thing I use for inside of the car shots, I use a small rig mini clamp and use a quarter 20 adapter on the go pro. The mini clamp has a rubberized inside so it doesn’t damage the things to attaches to. As I’m typing this you just started showing the magic arm haha....🤦🏽♂️
Hahaha! Dude, that friction arm is INCREDIBLE! I'm shocked at the places I've been able to put my camera because of that thing!
@@DavidManningvlog yeah they are so so useful. I got the snap mount because of you though! Hey since I just picked up an insta 360, is there a case or something that has the GoPro style attachment rather than just a quarter 20?
Hey David, is the suction strong enough to deform the metal panels on the van? It kinda reminds me of a dent-puller, so I would just be worried about denting my car door.
I think what keeps that from happening is that the rim of the mount is soft, while the inner bit is firmer and flat. So as it vacuums, the cup flattens out and there's no deformation of the metal. I know the suction pullers that you're talking about and they use a similar style to the PGYTech suction, where in order to create suction, they deform the cup which pulls on the surface. This mount removes the air and flattens the mount against the surface👍
My first thought as well.
nice! I had my gopro mounted on the hood of my car *with a cheap aftermarket plastic suction cup when I drove through Red Rock Canyon outside of Vegas, it was fine, but I was also driving pretty slow. I wouldn't mount one like that for full speed driving. That unit looks much more secure for sure! nice find!
Yeah, this one I'll have no issue mounting outside my car with the GoPro and being fully confident! The last video was my A7Siii mounted to the side of my van, but I wasn't moving with it. Not sure I'll actually do a driving shot with the A7Siii mounted outside😬
Video was released 7 hrs ago and the SeaSucker is already unavailable...
The power of David Manning! 👊🏻
I broke the arm of the Joby mount the second time I used it. It was hard to keep the arm of the Joby mount tight enough to keep it from moving in flight. I opted for RAM mounts and arms. High suction pressure can put a ripple in your car’s hood or fender.
Oh man, then you're going to love the Seasucker! They actually sell a "Camera Mount" version that comes with a RAM mount on there. Which also means that you could put this suction cup anywhere and then use your other RAM mount stuff to mount other things as well👍
@@DavidManningvlog The Seasucker is a beast for sure. I think you’re really onto something with the suction mount and arm combination. RAM arms are solid but hard to get all the angles and needed for complete flexibility. The issue for me in my jet is the windows get very cold in the fight levels so a suction mount that works well at the surface is often no bueno when the glass is -30 degrees. The Seasucker would handle that from what I am seeing.
You might've already done this. But just a suggestion, when I want to test a suction cu, I would mount something to the end of the rig of equal or greater weight than whichever camera I want to test before risking any expensive equipment. Great video I appreciate you showing this.
I’ve had one for years that I used for my iPad. They really do suck! Has worked great. Like the black one you have. Thanks for review.
I saw they have that! Theres a suction cup for both sides, right? That's a super clever way of mounting!
I use a suction cup on my windshield of my motorcycle.. I’ve been lucky and I’m probably jinxing myself but I’ve never dropped my gopro... yet... the stiff arm I think would be more stable in the wind.(60-70 Mph) ? Anyway thanks great video 👍
Which suction mount are you currently using?
It is just a after market one from Amazon.. I believe you showed us the kit you compared prices to gopro
I try to to get a lot of driving footage with our VW life videos but I really don't trust those things. I bought the red and white one after you suggested it but I too only mount it inside. I do have the little safety cable that I can attach to but I don't want to lose my gear. A lot of the times I will just hold my GoPro and put it in time warp mode in that works good enough
Dude, check out today's video. The shot in the gas station was my A7Siii mounted to the window outside my van with the Seasucker😮
@@DavidManningvlog ah that was a good shot , but you were driving :)
You have the insta360 one r right? You could use the same setup or do I need a different connector for the smallrig connector? The only thing I would worry about on a more expensive camera (especially a sony a7iii, a7siii, 7c or zv-1) is security... Couldn't someone snatch it while you're sitting at a light or something? Perhaps if it's closer to the windshield or on the roof that might not be so easy but on the roof you couldn't see it of course... Unless you have a sunroof and could put it right there in hands reach?
Have you seen the PGY tech suction mount with three different suction cups that attach to the single mount?
I have, but I can't find any info on what the pull rating is. It looks like a cool mount, but I still think it would face similar issues as their single mount. The vacuum pump is so key!
@@DavidManningvlog for sure! I ordered a Seasucker after watching this video. I was sold instantly.
When you mount your GoPro outside of your vehicle how do you control it? Do you use the GoPro remote or the Quik app?
Be careful driving with a massive gopro attached to ur windshieldas it can hinder ur visibility by law.In the UK, there is a small area where you are allowed to mount a camera (behind the middle mirror on the left side so u cant see it).
If u have an accident, they will void ur insurance, if police stops you they can fine you etc.
Interesting. I'll have to check the laws in the US about that!
Oh I’m from the UK as well but I didn’t know that!
Bit late to the party, but the rule is can't encroach beyond 40mm into the sweep of the windscreen wipers. And that's as fitted when sold; you can't just put shorter wipers.
I use the suction mount that came with the Neewer "million and 1 pieces for $30" kit. I also tether it to the kayak, as it does sometimes fall off. But, you know what, it still works and your video didn't talk me into the $60 one, even though that might work better. And a bike to my roof? I don't think so. Just couldn't relax with that. It falls off you wreck the bike, but might also kill someone.
Amazing, whenever I wanna buy something and study it... you always be there and provide your advise, Thank you so much!
I use Forevercam Magnetic 360 mounts which are small and very strong on the outside of my truck, they've never moved a bit. I enjoy your videos always entertaining.
Oh man I love when you purchase something and it comes with “water based lube”
Thanks for sharing!! I would love to use the SeaSucker Suction Cup outside on my sunroof for my GoPro while going through Utah and Colorado next month but, I'm afraid it could potentially crack the glass pumping it up. What's your thoughts? Thanks again David! 👍
I am defiantly sold on the the 4.5" one and that mount! Looking forward to outside driving gopro shots myself!
Yeah, if you're putting your GoPro outside your car, then this is for sure the mount to go with!
Hey David, can you mount the holder on the side screw mount of suction? Or because of the range of the arm is it not necessary? Fun video!!
Not necessary with the arm, but also the area to mount on the top is just too small for the arms tightening ring to fit in. So the front face is the only spot for the arm
Clever title ! Definitely caught my attention and I didn’t even put 2&2 together till you said something!
I have the Snap mount, and that friction arm looks very cool! That suction cup looks awesome too!
Thank you for your video. I have a textured dash and the mount I purchased won't stick at all. Have you tested any with this type of dash board cover ? Thanks
11:29 mad parking skills
Backup cam helps quite a bit🤣
Question for you. With putting the suction thing on the outside of your car. What do you do to help make sure that the wind doesn’t tilt your camera away from where you want it?
Just what I needed! Thank you!!!!!!!!!!
Great video. Makes me want to go shopping for gopro stuff. Thanks David.
For sure at least for this mount! In today's video, I did a shot where my A7Siii was being held up by this thing! Crazy👍
@@DavidManningvlog 😳😲 that's crazy!! I would be fearful my little a6100 would fall off.
Hi. For how long have you been driving until it shows the color indicator?
Hey Dave, you should turn the AC up, chill the inside, put the suction cup on the wind shield and then park it out in the sun, just to see if the button thingy would pop out slowly 😁
I left it mounted in the windshield for three days so that it would cycle hot and cold a few times. The button didn't budge! So problem solved👍
How would you compare it to the metallic mount?
Which metallic mount do you mean?
Sorry, I meant the magnetic mount you profiled awhile ago. That seems to work great to me. Any difference?
I ended up buying a gopro because of your video review of the hero 9. Love the videos
Love it ARK! Hope you're stoked on that thing! They're so damn fun!
The lube bit was hilarious.
Damn you David! First it was the magnetic mounts. Now, I thought I was all set with my suction cup stuff. Sigh, I'll have to get this one too. DAMN YOU. :-D
Any suggestions on this sea sucker with a DSLR. I’m planning on getting a camera angle from the back seat to the front seat.
You can mount a gimbal and a camera on that little sucker. As long as you trust the screw in the buttom the the gimbal to hold up.
I know man! I'm thinking about it with the 6" cup that's coming! It says it can hold 210lbs🙌
@@DavidManningvlog Yes, it could be fun to try. but the esse of use with just mounting the gopro hero 9 is so much easier.
look at RAM mounts, been using them for years and they stay in place. Have one on my windshield, maybe needs a re-mount twice a year.
I was planning on buying the pgytech with an insta360 one r. Please do a video with a 360 cam outside your van. Pretty sure that would look cool!
On it Dave! I'll include that in the video comparing the X2 and GoPro MAX👍
Nice parallel parking work there sir! 🙌
Why thank you! Most of the credit goes to the Sprinter though. Crazy good turning radius!
Hey, David. Did you ever try a bigger camera?? Im getting to cross the Chesapeake Bay Bridge Tunnel with a gopro and came back to revisit your video from a year ago.
where did you get that first attachment thing on the sea sucker mount? (Not the small rig you have linked) I ordered one on amazon and it did not come with it
Very random question, is it small enough to apply onto the top of snowboard/ski helmets? I’m not sure how much I trust “stickies”.
Probably not. It's 4.5" inches in diameter, so you would need a fairly large flat spot on your helmet to make this work. I rock stickies on my snowboard helmet and I've had two sticky mounts that have stayed on my helmet for three years no problem! Just make sure to clean your helmet well, add the sticky mount, and wait a day or two to mount your GoPro on there👍
The SeaSucker is definitely overkill for this setup... meaning it's definitely going to hold. It'll hold much larger cameras with ease too. I can't vouch for the arm but can for the sucker.
Got an opinion on the official GoPro suction mount? I haven’t had a chance to try it on the outside of my car yet but it seems really strong on the inside of the windshield.
The Sea Sucker bendy arm is too strong? That's like a restaurant where the food is too good!
It's so strong you can't actually put the GoPro into the position you want. It's more like a restaurant that puts so much salt on your food that you can't eat it👍
Is the GoPro 1/4 20 adapter the same as the Action 3. Are the thumb screws the same.
Osmo doesn’t have a 1/4 20 that comes with the Action 3 camera
Hey David, what video editing software and computer do you use?
I'm on the 16" MBP with Adobe Premiere Pro👍
@@DavidManningvlog ugh...well, I decided on the cheap way out, I'm hoping it works. Got a gen 4 iPad air (256gb) and LumaFusion...
I need this for sure since I both own the other 2 suction mount u have and I never used them mount outside my car actually
Dude, do not put your big rig on that arm. Maybe the suction will hold, but I will not trust the arm with shock and vibrations.
Not worth finding out. Maybe get something that weighs as much as your camera with lens and battery, and attach that first. Just in case.
Love your content bro.
Checkout today's video! In the van shots and gas station shots are both with this mount and the A7Siii😮
@@DavidManningvlog I stand corrected, lol. But do you dare drive with the camera mounted?
I am more interested in that smallrig arm! I need something just like that!
Also did you ever try the GoPro suction attachment. I think it works really good, never had itfail on me... but I still tether it just in case lol
I've tried the GoPro suction cup and same issue. It's good until it's not. With all the other cups, you have no indication when they're about to fail or when they're losing suction. With this one, you see the orange well before it ever fails! I'm all in on this mount now!
Have you tried the magnetic mount outside your car?
Yeah, the Snap Mounts work great on the outside of the car WITH the rubber mat bit. The rubber mat adds that extra friction. The issue with magnets is that while they have great pulling strength, they don't have great sliding strength. Meaning that they're not going to fall off your metal surface, but they may slide around on it. So the mat helps with the sliding bit!
@@DavidManningvlog ok thanks :)
Hi David. You really took risks here.. . sold me on this!! ... I totally trust this.. However..still looking for a mount to attach to the mtn bike front or rear Fork... just that most of the mounts attach too close to the spokes. ...Trying to get that shot you know.. super close to the wheel.. and terrain .. any recommendations? ..I don't see you much on mtb ... but am sure you would find a lot of new fans. LOL ( like you need more..!) .I spend more time attaching mounts than actual video cam time. Thanks for this great review.
I’m surprised you don’t just have a GoPro base stuck on your window. I use mine for “dash cam” purposes when driving and just use the slide clip to take on & off. Nice sucker though :)
yeach suck mount , magnetic mount and also some custom 3dprinted mounts are best to use
I need to get me a 3D printer for some custom mounts!
@@DavidManningvlog well best value option is ender 3 wich you can buy for 200 gbp filament 1kg cost 20gbp ... and it will takes month for you to finish it :) i am working now on gopro timelapse rotator and gopro camera portable slide
Have you ever tried the GoPro original suction cup? Man, that`s strong!
I've been looking to try to get that same shot but don't trust any mounts for my GoPro. Was thinking maybe SnapMounts would work for GoPro, thoughts? And what could I use to get a normal shot, cause Snap Mounts could only be mounted with the GoPro shooting in vertical mode
What about on a jetski?
how would you adapt your full frame camera onto the suction cup?
Would this be good for surfing too?
They have it on their site being used a surf rack, BUT I can't imagine putting that much suction on my fiberglass surfboard deck. If I were you, I would go with the stick on GoPro mount with the secondary safety line piece gopro.com/en/us/shop/mounts-accessories/surfboard-camera-mounts/ASURF-001.html
I would totally trust that arm with a GoPro9 or even a bigger camera... what I wouldn't trust is a flimsey arm to hold it! What's the strength rating on that magic arm??
Why not just tether the camera? Lots of spots to tie to on the van and in spots you cant buy a second suction mount and tether to that. Then you have zero worries.
Tethering is cool, until you have to rely on that tether and the gopro goes bouncing off your paint at 65mph😬 I would rather use a solid arm like a friction arm to tether to another suction mount. So if the main mount fails, it will still stay in place and not swing and bounce around👍
This video needs a recommendation for screen protectors, lol. Great vid!! Also, I love my PGYTech, but the SeaSucker looks super solid.
Welcome to seasucker! Cyclists have known about it for a while. You can trust the mount with your big camera, I would be more concerned about the arm. The "hey babe" line right at the very end made me laugh so hard! 🤣🤣
Hhaaa! That's awesome to hear that I'm good to go with these things! And you know I'm always looking for the laugh🤣
@@DavidManningvlog when guys trust their $10k bikes on those things you know you're good!!
David. Great Video! quick question if you dont mind. I sent my gopro hero 9 in for warranty repair over a month ago and i am being stonewalled by gopro's support. I can't get an answer from them about when I might see my product again. I have used their support phone system and chat system half a dozen times, still nothing. Any recommendations? Thanks. Keep the incredible content coming.
Are you still using this suction mount? How is it?
Hey David, great video! I was wondering though, did you ever try and compare the GoPro Suction Cup Mount to the Joby and PGYTech? If not, why not?
Yep! And of those, the PGYTech is the strongest. BUT, this thing is WAY WAY WAY stronger than the PGYTech mount!
You definitely have evil sense of humor 🤣. Great content as always. From Kuala Lumpur, Malaysia 🇲🇾.
Do you have to worry about it warping the metal at all?
Definitely need to get a small one before summer for our new adventures.
Make a rig with a couple of them, spread the load and build in redundancy.
One of my cars had a pro photo shoot and they guy was using two and three of these for the different angles
What about the snap mount?
Yep! Now that I have it fully setup, I have the Snap Mount on the end, so I can quickly go from other mounts to the Seasucker mount! 🙌
What is the size of the smallrig arm 9 1/2 or 11?
Old News Buddy been using it for a year, I also have the boat ones for my top
Great content yet again... your positivity is fantastic 🤘🤘
I would mount a 360 camera on the roof just above the windshield. The different views produce cool shots.
I have been used the SnapMounts in the past to mount onto the car.
Where did you get the gopro colour screw ?
Great idea - plus it will pull out any dent on a car - it can pay for itself. True
How do I reduce vibrations as much as possible? Using camera In a car and on the roof.
What about using a Insta360 extended out some would this be strong enough ?
is this a Bigger is always better.... situation... and lube tube... lol
Hahaha! I'll for sure be trying the insta360 on this mount!
@@DavidManningvlog Perfect. I have a 3 suctions cup mount I use but I still use a tether don't trust it.
Love your vids. keep it up!
Hi David! I know you have talked about Snap Mounts in the past. Someone else has recommended those for mounting GoPro on the car exterior. What are your thoughts on Snap Mount vs suction mount for this?
The snap mounts are only magnetic and only good for maybe slow driving with it on the hood a a car
Looks cool!
Hi David was wondering what mount you recommend to use on the inside dash of a car? The one i have now is the pgytech but doesnt stay on the dash without falling after about 5 minutes
Are there any that you'd recommend on that type of surface?
Mount this on the roof with a Insta360 X2 get some really interesting stuff for sure.
Well this is a dope idea!
How about the gopro mount from there site?
Nope, not a fan. Their "Camera Mount" is a really good option, but the friction arm means you can really put the camera anywhere you want!
For the vertical mount I'd be stressed if a car got too close to me on that side and whacked it off!! Sick mount though!
Hahahah...David don't put the mount in your. At least spit on it!! Thanks for the info. Super helpful.
where you buy your caps?
It's a sample for a possible future BE A GOOD HUMAN hat!👍
@@DavidManningvlog great, i like the shape of it, please, make some L/XL sizes too!!
to be honest, no matter how good, i dont think i could ever fully trust a suction cap. maybe with a safety cable, then yes.
For the GoPro, I'll trust it out there. But for my bigger camera, I will for sure be running a safety cable!
One of the most important things in life is the ability to "crack yourself up". You have it. I have it too. Strong character quality! #Attaguy I had the Joby suction mount on my wish list. Never got it. Added the Joby to the wish list... taking them both off the list now and adding this bad boy. Also, I finally got my "Try Hard, Take chances" shirt today !
That mount really sucks. Great find and another great video!!!
Awesome product. There is no way I would feel good about my big and expensive camera dangling outside my vehicle. That is just me.
So damn funny. Got my shirt this weekend!
Suction vs Magnetic? Have you tried any Magnetic mounts?
Do you trust the Snapmount to hold your GoPro on the outside of your vehicle? I tested it the other date but didn't go very far or very fast... LOL - "It's non toxic... water based...hey babe!" hehehe!
Also curious about how this compares to the Snapmount. You feel this is more/less secure?