Bose QuietComfort 35 (QC35 I & II) Hinge Repair with 3D Printed part | DIY, low cost
ฝัง
- เผยแพร่เมื่อ 4 ต.ค. 2024
- I bought these bose qc35 I headphones for $50 with a broken hinge. Can it be fixed with a 3D printed part that costs less than $0.10.
STL files: www.thingivers...
---
Song: Atch - Your Love
Music provided by Vlog No Copyright Music.
Creative Commons - Attribution-ShareAlike 3.0 Unported
Video Link: • Atch - Your Love (Vlog...
Song: LiQWYD - Explore (Vlog No Copyright Music)
Music provided by Vlog No Copyright Music.
Video Link: • LiQWYD - Explore (Vlog...
Song: Atch - This Feeling
Music provided by Vlog No Copyright Music.
Creative Commons - Attribution 3.0 Unported
Video Link: • Atch - This Feeling (V...
Song: LiQWYD - Glow (Vlog No Copyright Music)
Music provided by Vlog No Copyright Music.
Video Link: • LiQWYD - Glow (Vlog No...
Song: Marin Hoxha & Clasio - Spirit
Music provided by Vlog No Copyright Music.
Video Link: • Video
Bro genius really love the video can’t wait to print and test the part out good looking out.
Thank you so much for this video and the 3D model! This was so helpful and I saved money. I was really sad that the hinge was broken and didn’t know what to do. I’m glad I found your video. I don’t know or have the tools to solder so I followed the advice of others and clipped off the original hinge. This saved me so much time and money. So I appreciate this so much!
Hey there, thank you incredibly much! My headphones broke in the exact same spot, used your 3d model and it works perfectly! Just one point: please tell in advance that with the model attached it is not necessary to detach all the wires and then solder them again: it is enough to cut open the existing aluminium hinge with a dremel (being careful not to touch the cable) and fit the cable in the 3D print part; I was almost going to give up when I realized this! Thank you a lot again!
Yes you can cut it with a dremel, just be super careful not to cut the cables. Good luck!
can you explain how you attached it without cutting the wires?
2 år senare och ännu en person hjälpt, tack som fan
Unbelievable that it can be repaired
Thanks a lot for your sharing. Could you also please do us a favor and create another STL model for the left hinge? As a naive environment protectionist who just starts to repair things, I highly really appreciate that. 🙂
Can you make the model for the screws that hold the hinge please
Danke, war sehr hilfreich :)
excellent video thanks!
This was recorded before I got my Canon G7X Mark II So the quality is a bit rubbish. Sorry about that. Anyways, here is the STL files: www.thingiverse.com/thing:4583532
Hello, can you describe how the shim/ washers in the hinge are supposed to be fitted? My headphones just fell apart so I have not seen how they where fitted originally. You do this in the video @8:36 but it is fast forward speed so hard to see how you put them in. Thanks in advance :)
Thank you for the video!! I have a question, what type of screw is necessary for that part? Mine is broke in the same spot but the screw is gone.
6:05 Can you please share this note of connections?
Hey! Thank you. What materials did you use in the 3d print?
I have used this fix a lot of times now, and an endlessly grateful for it but my recent ones keep snapping immediately!
Thanks for this video. Really helpfull. Unfortunately I can not solve my problem. The matter is, that with each step I hear some extra sound in the right earphone. It seems that some detail has fallen off and is hanging out. I've checked, and there are no such details. Everything holds up very well. Can anybody maybe give me a couple of tips? It's hard to listen to music during jogging...
Can anyone share a picture of the cake soldering or cables before they were detached ? Please please
The other side needs different part,pls halp
I'd buy a couple of 3D printed units in the UK, please let me know if anyone can sell them. Thanks.
Another Brit here looking for 3D printed one
Does this only work for the right side?
@ZeroKnowledge - where did you print this for 10 cents?
Hello. Is it possible to buy one of your hinges and ship to sweden?
No need to disassemble headphones, or use solder. I used a small saw to cut the original metal part. But I cut my finger, be careful ;)
How do I order the hinge you made?
hi,
there am i able to buy this hing from you ?
Hej, har du egen 3D-printer?
What kind of glue did you use to put the case back over the wires?
You can use any glue!
If I remember correctly, I think I just put the case back and the old glue was sufficient.
I had same broken headphones. Thanks, fixed it with this part. One thing though, if you have broken hinge, my advice is to cut it off with wire cutter or little saw or smth. Thus there is no need to disassemble headphones, or use solder.
Author, do you have the old exact model of the hinge? It seems that rotation limiter is not present in updated hinge. It keeps spinning 360 deg. In the original hinge there are some limiter present.
drive.google.com/file/d/1nhuuiK9oRAI3jA63aMNyKBQMCHIIMhkd/view?usp=drivesdk
Glad it worked! Thanks for the tip!
The rotation limiter is a known issue, both in the updated design and the previous design. I think you have to increase the height of the rotation stoppers for it to work properly.
Cut the hinge off? How would you get the new one on?
can some send this to me?? ill pay
I payed 300 for these and same problem I will never buy bose again
It's absolutely crap
Just fixed mine as well, but I have ordered part from China as I don’t have an access to 3d printer
NO NEED to desolder, as hinge part design is improved by author 9:09 (thank you!!)