Remember to check out my playlist for more on the LG Washer Dryer Combo here now: th-cam.com/video/IFRDJWAHrq0/w-d-xo.html&ab_channel=ProductReviewswithSteve
I've found a damp microfibre cloth is perfect for getting rid of fluff and whatever else around the door seal. I never have mould in my washing machine, I think, because I always leave the door ajar at the end of every wash cycle. I do the same with the detergent drawer.
Thank you for the very thorough and in-depth video. I didn't even know about cleaning the detergent tray. Fyi when I clean the inside gasket mine has a flap that if you fold it down you will see a bunch more lint. My model might be slightly different.
I tried this even though i had a samsung washer and it worked great. I found much mold and much resedue behind the front panel so i had to take it off! It smelt like dead rat and would heat up and make loud screaming like noises but after i checked under the detergent tray my problem was solved! there was a 25 year build up of a mix of asbestos, bleach and dead cockroaches. I also flushed out the water from the bottom and there was some leftovers from 2006 christmas! Thank you so much for the helpful video
Ugh . I have this machine in my apartment and I absolutely hate it the rubber lint filter. I wish it just had a normal lint filter that you can pull out like a standing dryer.
THANK YOU! My lint trap was full of nasties clogging it -- so full, I broke the pull handle because the trap was stuck. Luckily, I have little fingers and got it free without the handle AND the handle snaps back together.
Great video, I hadn’t cleaned the detergent tray before, but now will. I would add to the process 1) use a toothbrush to clean the housing for the lint trap; reaching way back gently to though. 2) lift the gasket flap next to the tub (difficult) and run a toothbrush or q-tips there as well as the 3 little holes at the bottom of the gasket. I found I need to do clean every 3 weeks, and I do leave the door ajar.
Another commenter spoke sarcastically of really needing to dismantle the machine from the floor pan up. I hope mold doesn’t reach further back than the tubing that’s accessible. My laundry comes out fresh if I clean every 3 weeks, regardless of the number of cycles run, so it must be OK. However, today I went a step further, and used a 2’ springy straw brush I had. The brand is CamelBak, and made for cleaning the sip tube. This reached all the way to the back of the tubing where the filter is, and also the small tube for draining. I rotated it around while bringing it back out. There was definitely a LOT of mold up there. Side note - this is now a dedicated brush for the washer. 😆
Glad it was of use. Yes, I have got the same lint in the door seal. Will have to do a video on it when I get a chance! For now, a vaccum cleaner with a thin head/nozzle should do the trick 👍
I have a combi washer/dryer but I just have one question I know there is the lint filter for when your washing the clothes but I dont know where the lint goes when I use the dryer does it go in the same filter?
please what does the CD mean at the end when its done washing?? and can you please do a video on its general functionality and the signs/icons it displays when operated. thank you.
cd = cool down mode after drying * I would like to do a video on icons but I sold the machine when I moved house (I liked it but had to sell)- I'll see if I can compile one from my existing videos 👍
Hello hello! 👋🏽 I have the 12/7 kg version combo It has been staining my clothes since the first day of use 😢 I have tried using a few amount of detergent but nothing changes 😢 what could I do? Thanks
oh no, that sounds really bad! what kind of stains are you having? If you can't go back to the manufacturer, I've just seen this blog post that looks like a good set of the possible problems to work through (not my site but it looks good) home.howstuffworks.com/home-improvement/household-hints-tips/cleaning-organizing/washing-machine-leaves-stains.htm
Thanks for the video! One question is: does the lint filter need to be cleaned after every drying cycle as in a normal dryer? If not, how often do you recommend to clean it?
Glad you found it useful. I was cleaning it here after a dozen or so drying cycles but it would depend on the type of materials you're drying. I'd say every 6 cycles or so should be fine. Enjoy
Just went into a household that had an lg machine absolutely FILLED with mold. The small indentures and crevices really make it hard to properly clean it. Also had to intensively clean the compartment where we put the detergent rack. I still feel like I didn't catch all the mold and I'm worried about it 😢
When you do the Tub Clean with the tablet, why don't you also put bleach in the bleach compartment? My LG manual lists a number of cleaners and where to put them (in the drum, in the bleach compartment, in the detergent compartment). Sounds like I should just do one of them.
Fortunately, I've not had any issues. But there are other possible issues stopping the drying function working properly - check out my video on it here th-cam.com/video/rKS4kZ3YW10/w-d-xo.html
Can the rubber seal be removed to clean underneath it? I have so much hardened lint under the seal that I can’t possibly get to it all with removing the seal
Thank you for the info. Quick question, what do you do after you've applied vinegar and water on the rubber and left it for 15min. Do you keep it then to dry or you turn on the machine at and do a tub clean cycle? Wasn't sure what happened after step. Thanks for letting me know
I believe that they only break off by giving them a firm whack backwards. there's a tab inside that is designed to break, so they are not removable for cleaning etc, just for changing - other videos on removing baffles on washing machines should be generic enough to help you, I think. good luck
Here's how I clean the lint trap in another of my videos - be careful with draining the hose as it can get messy! As you'll see, I don't use anything special, just some regular cleaning utensils (link should start video at 5:24!) th-cam.com/video/vQyQGBb2nwI/w-d-xo.html
hey there! It's at the bottom right but can get messy if not done right. I've just published a video on this here: th-cam.com/video/qKC8cBfjBKg/w-d-xo.html Hope it helps.
Hmmm… was hoping for some not so obvious info. I clean the gasket, and the lint water while disaster piece of idk why LG is thought that would make sense and continue to do so with other models, and the soap dispenser. The issue is the gasket and between the gasket and tub space. The lint/pet hair that accumulates is insane and I can’t get to it.
Do you realize you did absolutely nothing? The entire machine needs to be taken out of where it is, the plate on the bottom needs to be taken off the back, drained, unscrew the actual lint filter out... Clean that out, and then get something long enough with bristles to get into the pipe and clean that out... Then after you power off and reset your system which is another process, then maybe if you are lucky it'll work right again? What you did accomplished absolutely nothing and by the way coming from an HVAC professional... That unit unfortunately is junk, get rid of it while you can! If you have some ingenuity you can make a screen to catch the majority of the lint before it goes into the pipes and lines. This way it'll keep your vents clean enough so your sensors don't get messed up and you don't have to do everything I just said, instead just remove the screen you installed. Just be sure anything you decide to use needs a complete water tight seal around it to make sure nothing gets through. Otherwise every 6 months you are going to be doing the same thing! Your welcome
Remember to check out my playlist for more on the LG Washer Dryer Combo here now: th-cam.com/video/IFRDJWAHrq0/w-d-xo.html&ab_channel=ProductReviewswithSteve
Help how do I open the detergent door on one of these im afraid to yank it open fear it will break
This is sooooo helpful. I inherited my LG 2-in-1 from the previous homeowner and no instructions on cleaning were provided. Thanks!
glad to hear that! You've got a good machine there! I've got other videos on getting the most out of it, too 👍👍
Thank you so much, I go to this video every time I need a refresher
Glad it's useful!
Thank you! None of this is in the manual. You're wonderful.
Glad it was helpful!
I've found a damp microfibre cloth is perfect for getting rid of fluff and whatever else around the door seal. I never have mould in my washing machine, I think, because I always leave the door ajar at the end of every wash cycle. I do the same with the detergent drawer.
Great tip!
Thank you for the very thorough and in-depth video. I didn't even know about cleaning the detergent tray. Fyi when I clean the inside gasket mine has a flap that if you fold it down you will see a bunch more lint. My model might be slightly different.
Thanks for this. I will have a look and see👍
@tomcastinc I think I have the same model as you because I do the same to clean the lint
I tried this even though i had a samsung washer and it worked great. I found much mold and much resedue behind the front panel so i had to take it off! It smelt like dead rat and would heat up and make loud screaming like noises but after i checked under the detergent tray my problem was solved! there was a 25 year build up of a mix of asbestos, bleach and dead cockroaches. I also flushed out the water from the bottom and there was some leftovers from 2006 christmas! Thank you so much for the helpful video
Glad it helped, sounds like some interesting finds!!
😂😂👏👏
Ugh . I have this machine in my apartment and I absolutely hate it the rubber lint filter. I wish it just had a normal lint filter that you can pull out like a standing dryer.
I hate it, trying to dry and i still see some water in rubber thingy. Why does it take so long to dry?! Hate this crap, making me miss my laundromat 😩
THANK YOU! My lint trap was full of nasties clogging it -- so full, I broke the pull handle because the trap was stuck. Luckily, I have little fingers and got it free without the handle AND the handle snaps back together.
This just happened to me. I was looking to see if others had any fix.
Thank you
Great video, I hadn’t cleaned the detergent tray before, but now will. I would add to the process 1) use a toothbrush to clean the housing for the lint trap; reaching way back gently to though. 2) lift the gasket flap next to the tub (difficult) and run a toothbrush or q-tips there as well as the 3 little holes at the bottom of the gasket. I found I need to do clean every 3 weeks, and I do leave the door ajar.
Great tip! appreciate that👍🏻
Another commenter spoke sarcastically of really needing to dismantle the machine from the floor pan up. I hope mold doesn’t reach further back than the tubing that’s accessible. My laundry comes out fresh if I clean every 3 weeks, regardless of the number of cycles run, so it must be OK. However, today I went a step further, and used a 2’ springy straw brush I had. The brand is CamelBak, and made for cleaning the sip tube. This reached all the way to the back of the tubing where the filter is, and also the small tube for draining. I rotated it around while bringing it back out. There was definitely a LOT of mold up there. Side note - this is now a dedicated brush for the washer. 😆
Much better than following LGs user guide or those fkn misleading videos in their website.... Thank you.
Glad to help
Thank you so much for this much needed information. 😊
Glad it was helpful!
A very informative video Steve!
I see lint collected on the Rubber door seal as well. Have you observed the same in your Tumble Dryer please?
Glad it was of use. Yes, I have got the same lint in the door seal. Will have to do a video on it when I get a chance! For now, a vaccum cleaner with a thin head/nozzle should do the trick 👍
@@homehelper9273 Thank you for the tip! Much appreciated.. :)
please what order clean device/material can we use to clean outside the 'CALGON'?
THANKS!
anything similar should be fine - there are so many products it's hard to say any one!
@@homehelper9273okay. Thanks.
I have a combi washer/dryer but I just have one question I know there is the lint filter for when your washing the clothes but I dont know where the lint goes when I use the dryer does it go in the same filter?
please what does the CD mean at the end when its done washing??
and can you please do a video on its general functionality and the signs/icons it displays when operated.
thank you.
cd = cool down mode after drying
* I would like to do a video on icons but I sold the machine when I moved house (I liked it but had to sell)- I'll see if I can compile one from my existing videos 👍
@@homehelper9273okay. Thank you so much
Thank you. Very helpful
Hello hello! 👋🏽 I have the 12/7 kg version combo
It has been staining my clothes since the first day of use 😢
I have tried using a few amount of detergent but nothing changes 😢 what could I do?
Thanks
oh no, that sounds really bad! what kind of stains are you having? If you can't go back to the manufacturer, I've just seen this blog post that looks like a good set of the possible problems to work through (not my site but it looks good)
home.howstuffworks.com/home-improvement/household-hints-tips/cleaning-organizing/washing-machine-leaves-stains.htm
Thank u so much very helpful
Thanks for the video! One question is: does the lint filter need to be cleaned after every drying cycle as in a normal dryer? If not, how often do you recommend to clean it?
Glad you found it useful. I was cleaning it here after a dozen or so drying cycles but it would depend on the type of materials you're drying. I'd say every 6 cycles or so should be fine. Enjoy
Just went into a household that had an lg machine absolutely FILLED with mold. The small indentures and crevices really make it hard to properly clean it. Also had to intensively clean the compartment where we put the detergent rack. I still feel like I didn't catch all the mold and I'm worried about it 😢
it's impossible to get it all! hope you can get some way with cleaning them though👍🏻
This is very informative 😊
glad to hear that!
When you do the Tub Clean with the tablet, why don't you also put bleach in the bleach compartment? My LG manual lists a number of cleaners and where to put them (in the drum, in the bleach compartment, in the detergent compartment). Sounds like I should just do one of them.
You're probably right - I'd better revisit the manual!!
Thanks so much for this! Mine also seems to not be taking in any softener if I use it.. thoughts on that?
Thanks for the video. Have you ever had any lint blockage issue with this machine when it doesn't dry the clothes properly?
Fortunately, I've not had any issues. But there are other possible issues stopping the drying function working properly - check out my video on it here th-cam.com/video/rKS4kZ3YW10/w-d-xo.html
Thank you sir. Your video very help me
Glad to hear that!
Can the rubber seal be removed to clean underneath it? I have so much hardened lint under the seal that I can’t possibly get to it all with removing the seal
it can but it's quite a lot more work 🥺
Thank you for the info. Quick question, what do you do after you've applied vinegar and water on the rubber and left it for 15min. Do you keep it then to dry or you turn on the machine at and do a tub clean cycle? Wasn't sure what happened after step. Thanks for letting me know
Hi how to properly remove the baffles inside... I cant see anything to unscrew
I believe that they only break off by giving them a firm whack backwards. there's a tab inside that is designed to break, so they are not removable for cleaning etc, just for changing - other videos on removing baffles on washing machines should be generic enough to help you, I think. good luck
Great video!
glad to hear it was useful👍🏻
Thank u I do appreciate details
We have this and I absolutely hate the lint situation. Wish it had a stand up tray.
Thank you, this has been very helpful
Glad to hear that. Just ask if you have any other questions👍
What are you using to clean the lint ?I have a LG all on one and have been through 4 pumps this year
Here's how I clean the lint trap in another of my videos - be careful with draining the hose as it can get messy! As you'll see, I don't use anything special, just some regular cleaning utensils (link should start video at 5:24!) th-cam.com/video/vQyQGBb2nwI/w-d-xo.html
My washer dryer stopped drying well… any idea what could be the reason?
Thank you so much 😊
glad it helped👍👍
Hi can you help my lg cannot dry , when i try to dry my clothers getting wet again. Can u help ? Thank u
How old is your machine?
@@johndoe-vc1we hi 2021 but rarely use, spin all ok but when it comes to dryer it cannot dry and cannot rinse the water
my standalone dryer has a lint filter. Where is the lint filter in this combo? Thanks!
hey there! It's at the bottom right but can get messy if not done right. I've just published a video on this here: th-cam.com/video/qKC8cBfjBKg/w-d-xo.html Hope it helps.
I think you should use liquid detergent to avoid this kind of molds
I've actually switched over to that exclusively of late. Will see if it improves.
Yah when it comes to front loads I'd never use anything but the sheets or the liquid. The powdered detergent just gums things up in so many areas.
Hmmm… was hoping for some not so obvious info. I clean the gasket, and the lint water while disaster piece of idk why LG is thought that would make sense and continue to do so with other models, and the soap dispenser. The issue is the gasket and between the gasket and tub space. The lint/pet hair that accumulates is insane and I can’t get to it.
Just to be sure, you mean the part you can only see when you pull the gasket back a little?
How long have you had this machine?
I think about 2 years at this point, although I'd need to double check. It's held up well so far.
@@homehelper9273 thank you. That is helpful. Used your video yesterday for cleaning advice. Thank you
@@mariad2468 Hope it helped. Just ask if you have any other questions👍
@@homehelper9273 yes it really did help thank you 😊
Thank you sooo much!
Happy to help. Any requests, just ask - although quite a few tip videos for this machine are already on the channel!
Thank U!
You're welcome!
Where's the lint tray so I can empty it from drying clothes?
Did you see it in the video? If in a rush, skip to 5:25 - hope it helps.
Tub clean can't set temperature
thanks for the correction 👍👍
Very difficult for me to use
yes, it's not the most intuitive design! hopefully it's getting easier
pull it out far cloud it break we do not want that
which part, the detergent tray? or the hose? The hose just needs you to be gentle with it and it should be fine.
Do you realize you did absolutely nothing? The entire machine needs to be taken out of where it is, the plate on the bottom needs to be taken off the back, drained, unscrew the actual lint filter out... Clean that out, and then get something long enough with bristles to get into the pipe and clean that out... Then after you power off and reset your system which is another process, then maybe if you are lucky it'll work right again? What you did accomplished absolutely nothing and by the way coming from an HVAC professional... That unit unfortunately is junk, get rid of it while you can! If you have some ingenuity you can make a screen to catch the majority of the lint before it goes into the pipes and lines. This way it'll keep your vents clean enough so your sensors don't get messed up and you don't have to do everything I just said, instead just remove the screen you installed. Just be sure anything you decide to use needs a complete water tight seal around it to make sure nothing gets through. Otherwise every 6 months you are going to be doing the same thing! Your welcome
Hey. If you can do a video on the process that would be helpful. Thanks
Video, please
THANK YOU! So helpful