Mate, I've been working up the gumption to do this thing for months, and every time I go over the procedure, its your videos I look for. I've watch tons of these videos by other youtubers and despite you being the only one that seems to know what he's talking about you were 19th on the list, with a couple of shorts bars, too, when I just searched this time. If anyone else reading this knows how to help with the algorithm, this man Deserves it. Someone with expertise explains as well as instructs, and - definitely in my case - provides the confidence you may need. We need the experts at the top. Its lovely weather here today, and I've got some time. Will post once I've got the machine to 1st wash.
I'm very humbled by this comment and appreciate your support. There are many TH-camrs who make videos just for money, but they don't always have the knowledge to back it up. I've been on TH-cam since 2006 and started just to help friends. Over the years, my channel has grown quite large because of the consistent information I provide. I will continue to make long, perhaps boring, videos with relevant and correct information rather than just flipping a video for money. I will always hold manufacturers accountable when they produce rubbish for profit instead of quality products for consumers. Thanks again for all your support.
Hi thanks a lot for your comment, and I'm glad to receive your thoughts. It would be really helpful for me to get my video shared and help us fight appliance waste! Please remember to subscribe to our channel, as that really helps us 😇 Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/ Thanks, Paul 👍
I can't believe I forgot to subscribe - that's it done. I did the procedure yesterday. The seal is clean, but there are still a little spots of black staining on the inside part and I had to get the machine back in working order first thing, so there was no time for more soaking - I have to admit I only turned and scrubbed it one time about thirty minutes after I first put it in to soak overnight, but I've got some Segemur Gel I bought before I found out about the conditions on the inside of the machine coating it now. I followed the 90° wash with the rags, dishwasher tablets, squirt of bleach, water-fill-top-up, and suspending the wash at it's peak temperature, (for about an hour - forgot), before resuming the full wash. The results were perfect: the smell from the machine is GONE - it smells brand new - and I'm more than happy with the seal -even if the Segemur is a bust. Now for the bad news: as soon as I started removing the front panel, I realised it was corroded - causing the paint to bubble under the soap drawer, and across a significant amount of the bottom of the panel just above the strip with the filter trap access thing. I'm in the middle of a bunch of household decorating and I've got everything I need to remove it , sand it, and respray it, but I'll have to find out if this is a viable or wise way to keep him out of the landfill - getting quite fond of the little guy now. Will check your videos to see what's there, now. Thank you for all this, mate - this was a lot more fun than a reasonable man might expect. 👍
@@NeilThomson-f7tYou know what, i like both of you. Paul for the outstanding work, dedication and pure genuine will to help and you for your recognition and appreciation. I myself watched a few videos before discovering this one, and yeah the others did get it clean but not anywhere to the level of thoroughness of this here. I’m just going to quickly look up a video on how to remove the front panel on a Samsung (i don’t want to remove any screws more than necessary) and I’ll get right on it. As for the algorithm, TH-cam has been weird about it as of late, most creators have been struggling to crack it but generally it’s the usual stuff that help, liking subscribing sharing but especially commenting. The video needs movement and circulation, or soak wash rinse spin so to speak :) Anyway, cheers to you both and remain kind, gentlemen!
I think you need to do a series of shorts from this video to get more views. I just spent half a day scrubbing the horrible black mould out of my rubber seal on the Hotpoint washing machine and the effing stuff is back and now I know why. I used the HG Mould Remover Foam Spray, Mould Spray & Mildew Cleaner, it comes out like a foam and it is very good but I had to treat it 3 times. I don' know if I have the gumption to open the whole thing up and try and take out the rubber seal.
Hands down the best "how to clean a washing machine" video out there . Made Simple, easy to understand and explained perfectly each step and all of that in a calming voice. Ps: keeping the environment in mind at all times was the cherry on top👌
Wow, thanks that one nearly go a tear thank you! Thank you For leaving a comment this is for you th-cam.com/users/shortse432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍
Definitely, great video, I used to change the brushes in my mum's washer when I was a teen, many moons ago.. my Hotpoint just complained about F05 so I thought I best brush up on my knowledge, glad I did 10/10 👌😎
Yes, I agree, you could say I'm one of the most popular people with them. lol Vincent Lee I would love you to leave your opinion on our poll about manufacturers building in obsolescence to appliances. th-cam.com/users/postUgkxygHomnUySd_bYjaJBdEHPO6T4dYo9Ahm and this is for you th-cam.com/users/shortse432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍
I have been trying to get the smell, gunk in between the drums and the nasty mold off the rubber seal for a long time. You are the only person that has solved my problem! Thank you!
Wow I have watched 20+ tutorials for our Samsung washing machine trying to figure out how to deep clean it and remove the lime scale and mold/mildew build up because it’s ruining our clothes! I use the washer’s self cleaning option and several different washer cleaners regularly and still the hard water and family laundry have destroyed this machine’s ability to function well in just a couple years. Soooo grateful for this video - I have hope that I can save the washer without having to replace it. Thank you!!!
In a word Brilliant. And from a Scotsman that says a lot. Great work mate, first time I have seen your channel My wife now has dementia so I have for my first time ever in 70 years done a wash and realized how much the machine needs to be deep cleaned, wish me luck. Cheers again and thank you for the detail in your presentation.
The right to repair. These kinds of videos are important, and huge thanks to the people who take the time to make those videos. NOTE: a Siemens IQ700 must not be turned off at the main switch while the program is running, then it will start from the beginning 🙂
We purchased our front load whirlpool washer and dryer about 3.5 years ago. I’ve typically just done tub clean cycles using afresh tabs thinking that was sufficient. Just a few days ago I looked more in depth at the washer and was stunned by the amount of dirt and black mold that had accumulated in the rubber door seal. This video is exactly what I’ve been looking for for in depth cleaning and maintenance. Thank you for putting together a thorough video explaining how to tackle this project, your time and efforts are well appreciated!
Thank you for leaving a comment this is for you th-cam.com/users/shortse432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍
We have a Samsung WF218ANW with practically the same setup as the washer in this video, and I followed your instructions to the letter. I’m happily listening to the initial wash on highest and longest setting after it’s all back together again. I could NOT believe the foul gunk that had build up over the years. You’re a life saver!! Thank you for all your hard work and ability to make it easy to follow along. Much appreciated. 🙂🙂
yes it's hard to believe we are all washing clothes in it. thanks 👍 for watching and please remember to subscribe to the Channel as that's what keeps us going in able to make the video for you
Thank you, thank you!!! Your step by step video was perfect to restore my 20 year old machine. The mould on our door seal was much worse than in your video. We had tried all sorts of products with no success. Unbelievably the seal looks brand new!!!! I was in total shock! We then did the drum clean and wow, the colour of the water was gross. Thank you for sharing your expert knowledge and saving us hundreds of dollars in servicing costs!!
You earned my subscription only 3 minutes in. Repair not Replace is something I try to live by myself, so it is always a delight when I find people who share that approach. Massive respect, looking forward to checking out the rest of your content!
Brilliant. Was very close to getting rid of my washing machine due to it making my clothes smell. Thanks very much for putting this video together... is hugely helpful! Subscribed!
I am not an appliance repairman. I have however used your videos to repair my dishwasher and my washing machine over the years. Cost to me of about £80 in parts and about 3 hrs of my time. (I'm not as quick as you at disassembly/reassembly) You have saved me hundreds of £ 👍
I got on TH-cam to find out how to drain my washer and came across your video. I have just purchased a new washing machine due to mould. It will be here later on this afternoon. I really wish l had seen your video before. So nice of you to share the tips that majority of people have no clue about 👏🏼 like my silly self 😂
You’re the best! I’ve managed to clean my machine to perfection & also gotten a bra wire out through the heating element hole thanks to your easy to follow tutorials! Thanks so much! ❤ xx
I can’t believe that I have just watched this at 7:30 on Sunday morning as I’m laying in bed! Great instructions and tips and I’m ready too have a go…..
we have been leaving the door and draw open on our washing machine ever since we got it (3 years ago) and i have to say it really does make a difference it’s never had mould once it looks like new and it’s always had a nice clean smell. compared to when we had our old one that one was very mouldy as we always kept it all shut and it really did have an unpleasant smell. this is a very useful video indeed 👍
Three minutes into this video and I already have to hit pause, the Like button and leave a comment praising your message on the environmental impact not only of this industry but also of our own choices. Thank you! More people should listen to this.
Fantastic to know about you and your critical efforts to help us save the planet! Addressing this issue of no longer being able to repair machines (from cars to all appliances etc, etc) is seldom being discussed much less helping us do as much as we still can--and initiate and support governmental regualtions to reverse this movement by corporate entities. BRAVO!
The problem being there are not enough people standing up to the manufacturers with the built-in obsolescence and the UN environmental way the profits always come first Glad it was helpful! Thank you for leaving a comment this is for you th-cam.com/users/shortse432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍
I get very humbled by your comment. All I'm trying to do is teach in the correct way that everyone understands. It would be really helpful for me to get my video shared and help us fight appliance waste! Please remember to subscribe to our channel, as that really helps us 😇 I will continue to invest the beer donations that I receive predominantly into the new video technology that I'm learning with tracking cameras and better audio to make it easier for everyone to understand. I'm also employing someone now to assist me in my workload. You can support us by donating to our website www.how-to-repair.com/help/buy-paul-a-beer/
Evening Paul. Thanks very much for the video. We have a Hotpoint Smart Tech. WMFUG 942P. Wife's been complaining about a smell. So yours truly manned up and removed the gasket washed as you suggested and reinstalled. All from the front.👍🏻. Never done that before!! But thanks to your advice wife is almost happy. 😄😄. A beer is on its way.
I can only repeat most of the previous comments. Excellent video, informative, concise, every piece of info needed to complete the job. Please keep making these videos , all the best to you.
Really glad you managed to get your machine clean again What would really help me to get my video seen as I'm no IT expert is to either share the channel or at least post it to your friends my videos might not be TH-cam superstars, but they save Appliances from the scrapheap. Share and help us fight appliance waste! @fiveshorts please remember to subscribe to our channel as that really helps us th-cam.com/users/shortse432SAb2g08 Thanks, Paul 👍
A-M-A-Z-I-N-G !! Thank you so much. Your video is the best one on how to clean that rubber seal. It’s been bugging me for years. And I appreciate very much your explanation on why these machines are built that way. So wrong.
I think you just my washing machine AND my laundry. Tried all the surface tips from other sites to no avail. I was starting to despair when I happened upon your video! Thank you thank you!
Thank you so much - having watched your video I plucked up the courage to clean out my machine - and then watched through again step by step as I actually did it. I had to get help putting the inner spring back on but otherwise managed the whole thing by myself - my Dad was aghast when I sent him the photo when I’d dismantled everything 😂 This was so helpful and I am delighted to no longer be pulling my laundry out of the machine and find greasy streaks. Saved me having to pay someone else too who I’m sure would have just replaced the seal and not done the full clean ie back to square one in no time. Hugely appreciative and will be sharing with all the friends who have the same problem with washing machine gunk!
Huge thanks for your lovely comments and I'm very glad you did it by yourself. Please remember to subscribe to our channel, as that really helps us 😇 Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/ Thanks, Paul 👍
Great video, it's very nice that a professional like you shared information about cleaning and maintaining the washing machine. Thank you so much for this video and your work. Good job.
I can't beleive how good this actually worked.I had serious doubts if i could get the seal cleaned.I thought for sure I was going to have to spend $150 on a new bellows (door seal). Thanks so much for putting out tried and true information!!
Glad I could help you. if i make a video its the truth, Thank you For leaving a comment this is for you th-cam.com/users/shortse432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍
Thank you so much for this! I need this today as my washing came out smelling so I need to do a good deep clean with it. I also love the mentality that we need to repair and try and prevent waste when things just need a little work to fix. My sister always gets rid of things when they just need a good clean, it drives me mad.
Glad it was helpful! Thank you for leaving a comment this is for you th-cam.com/users/shortse432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍
Glad it was helpful! Thank you for leaving a comment this is for you th-cam.com/users/shortse432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍
I'm really glad I watched your video. I tried to do something similar before with dishwasher tablets but it didnt work. However, I thought ile give it another try. I used 3 tablets & put the machine on a boil wash, but also raised the water levels up higher in the drum as was suggested. My machine now smells as fresh as a daisy. Thank you.
This is a brilliant video from a very experienced & knowledgeable engineer. The explanation was slow (great) and well-structured to follow. Anyone can follow it to help save the CO2 footprint in buying a new machine. Wish I saw this video before as I had to throw a molded seal for a new one. I did clean it with white Vinegar and bicarbonate soda and it did not work. We do leave the door and soap box open after every wash but the same problem on my Bosch machine appeared. Cloths getting mold on them. So this time, I have followed the video and cleaned all the pipes, soap box, and door seal. Today I have submerged every item in a bleach solution and will check the result tomorrow. I added two 750 ml of bleach and added warm water to bring it to some level to enable submerging the items. One question is that should I have just submerged the items in raw bleach or would the solution I have prepared do, as it is not clear in the video.
An amazing in-depth tutorial! Thank you for sharing your knowledge and tips. Hands down the best tutorial about how to clean a washing machine! Subscribed.
Brilliant, thanks for sharing. The only comment I need to make as a person who's been sick due to mold, is: please, while cleaning or dealing with mold in any way, you must wear a proper mask, googles and cover ears and skin. Mold is a serious issue, and people don't know it.. thank you!
Thank you sir for doing the video. Your video is the best by far. You are explanation is clear and easy to follow. All I wanted was to figure out how to get rid of the mold in the door seal. I am so glad I watched it...Grossed out but enlightened and empowered. I have just sent this link to friends and subscribed. Thank you!
Valuable, valuable video. I hope to use this to clean my uncle’s washer (I’m temporarily living with him). It has mold, gets a smell particularly after any kind of warm or hot water wash, and has gunk built up like mud between the drum barrel and door seal. It clogs even the drainage holes in the door seal rubber. Nasty stuff. My uncle-an engineer-has treated the mold and moisture issue as a just a design flaw. He does the recommended maintenance tips given at the end (minus the dishwasher tablets and rags with a boil cycle). Also, the model he has does not have an easy access to even a filter that could be cleaned from the front. Yeah. I’m gonna ask If I can take two days to do all of this maintenance on his washer. If he has never done any kind of cleaning like this on the washer-and I’m gonna advocate about the dirty mud and mold that gets on my clothes, and just flat out mold exposure-to see if this is an option we can try. I’m sure he would be happy with the cost effective solution versus purchasing anything new. As long as he does not say no for the reason of “I’m fine the way it is.”
Agree that this is the best cleaning video I've encountered., Will go after it presently. The thoroughness and explanation are exceptional. Thank you!!
Wow, thanks for some really great tips. After every wash I dry the rubber and door, however I must do a deep clean wash as you suggested at the end of the video. Thanks very much.👍
I'm glad my video was helpful to you mate. Please remember to subscribe to our channel, as that really helps us 😇 Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/
I'm really pleased the video was helpful to you. Could you do me a favour and take part in a poll I've made about the lifespan of appliances? You just need to tick one of two boxes. It will only take about 10 seconds. This might help us improve how machines are made in the future😇 Here's the poll question: www.youtube.com/@How-to-repair/community Also sharing will get more people to participate and we will have a greater impact with the manufacturers thank you for helping.
Thanks 👍 With Global leaders bickering and arguing over global warming, consumers and businesses need to more, the wastage in the United Kingdom alone is just too much. and Germany will have the same problem
Yes you are right! I'm just helping out the neighborhood. My job is actually a different one, but I've been doing this out of a hobby for a long time. You're doing a great job keep it up.
Glad it was helpful! Thank you for leaving a comment this is for you th-cam.com/users/shortse432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍
thank you Thank you For leaving a comment this is for you th-cam.com/users/shortse432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍
Thanks a lot for your donation mate. I will use it to upgrade my video quality. Please don't forget to subscribe to our channel as that really helps us! Thanks, Paul 👍
Wow, wow, wow!!!! Come to Canada and live with us! ❤ you honest man you. Thank u so much. My husband will surely be as enthusiastic as you are (I have no doubt) when I show him your video and ask him, please, please can he do this to our machine. Smile thanks again.❤❤❤
Wow!! you are truly amazing. My Miele washing machine had a drain problem, water level problem and bad smell. Wth of your videos I fixed, I took it apart to pieces, unclogged and cleaned everything, now it is like new. Thank you so much
Hi @yuvalpeleg7109 thanks a lot for your comment. It would be really helpful for me to get my video seen, as I'm no IT expert, to either share the channel or at least post it to your friends. My videos might not be TH-cam superstars, but they save Appliances from the scrapheap. Share and help us fight appliance waste! Please remember to subscribe to our channel, as that really helps us 😇 Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/ Thanks 👍
this is exactly what I needed, thank you so much for taking the time to put together such a comprehensive video. as others have said, what a decent chap you are! I have been cleaning the gunk from inside the lip of the seal but the bad smell would always return and occasionally some items in a wash would get strained from a stray piece of gunk! yuck! so glad to find out I can take it apart and get at the rest of the gunk. I am weirdly looking forward to giving it all a good clean 🤣
Glad it was helpful! Thank you for leaving a comment this is for you th-cam.com/users/shortse432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍
Absolutely brilliant - thank you so much for all your knowledge. The amount of videos I have seen which don't even get close to this level of clean - I kept wondering how they were actually truly cleaning all the inner workings. Really looking forward to cleaning tomorrow 👍
Glad to help Thank you for leaving a comment this is for you th-cam.com/users/shortse432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍
As a washing machine engineer for 30 years now retired cleaning the door seal with bleach is something I used to do regularly on recon machines for resale. On the Bosch machine like the one you featured I used to take the seal off without removing the front panel. Its a bit of a struggle putting the spring back on the tub securing the seal but not too difficult
So glad I landed on this excellent video. My samsung is 9 years old and I have the privledge of living in a beautiful and genreally hot part of Australia, but even so the seal finally started sheding crud on to the clothes even after ensuring the soap draw and cabinet are never left closed. Followed the steps and the maachine is as good as new. Thanks so much.
Really glad it helped you fix your problem Thank you for leaving a comment this is for you th-cam.com/users/shortse432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍
This is one of the best youtube videos out there! Thanks gentleman for this informative video! I’m going to do what you did exactly and get rid of that disgusting buildup in my washing machine
Glad it was helpful! Thank you For leaving a comment this is for you th-cam.com/users/shortse432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍
I have to conference, I threw away a 2 year old front loader washer because of this problem, years ago. Now I’m so confident that I’m doing it my self today. Thank you, I have the door seal out and is disgusting the amount of buildup is incredible, we were just about to get a new one but you just saved me from making that mistake again. Thank you 🙏 I got it all out and I’m not going to clean it until my wife comes from work, I’m sure going to score some points today!!! 😂 Again thank you!!! 🙏🙏🙏🙏
Absolutely awesome video on how to deep clean a machine. How the door seal came out was just astonishing. Will now try the trick with the dishwasher tablets and the rugs, because I suspect the outer side of my drum being very dirty. Thank you so much for this super-informative video!
Really glad I could help it's not a long process but it makes such a difference. Please remember to subscribe to the channel is that helps us glad we could help you @martinschrodt5797 this is for you th-cam.com/users/shortse432SAb2g08 please remember to subscribe as that's what keeps this channel going. Thanks 👍
You have a great channel here. Very informative and professional work. I don't know how you do it in Britain, but we in Eastern Europe actually split the sealed tub, replace the bearings and reseal in back with epoxy. It is not always an ideal solution, and the work is tedious, but it can be done.
That is awesome! Thank you for leaving a comment, I would love you to leave your opinion on our poll about manufactures building in obsolescence to appliances. th-cam.com/users/postUgkxygHomnUySd_bYjaJBdEHPO6T4dYo9Ahm and this is for you th-cam.com/users/shortse432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍
I can’t believe how much gunk came out of that washing machine!!!! Brilliantly explained video - I just wouldn’t trust myself to take the WM apart, AND manage to get it back together 😂
Glad it was helpful mate! I get very humbled by your comment. All I'm trying to do is teach in the correct way that everyone understands. It would be really helpful for me to get my video shared and help us fight appliance waste! Please remember to subscribe to our channel, as that really helps us 😇 Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/
TYSM. I was given an awesome washer by a sweetheart but they bought it off someone else and didn't know to check for anything. They know now. The front loading washer was left in storage wet and clearly evident never properly maintained or even cleaned. Full of debris, mold and even what looked like a dryer sheet smh filter was disgusting and over full. Unfortunately I'm not only allergic to mold I have asthma. I cleaned the filter, dispenser drawer and tried to clean the seal. I ran a self cleaning mode with a powdered cleaning solution specifically for getting to everything. Worked except for the door seal. Problem is because of my allergy to mold and my asthma I had respiratory issues for 2 days after. I came here to see how to safely and properly take the seal off so I can soak it and can't thank you enough. At least now I have a method to clean the seal, which is the main mold problem area, and will help me get this done quickly so I don't have to go into another episode. So, thank you again 🙏🏻🙏🏻🙏🏻🥰🥰🥰
Thank you very much for the generous donation if you ever need any further help feel free to contact me through the website and I'll be happy to assist you
Whoooaa. The amount of Gunk inside that seal when you removed and it made me want to try that next time but for now I'm just pulling the liner open as much as I can and getting what I can get with a scrub brush and white vinegar and soda after having tried bleach and before that hydrogen peroxide and Dawn. The washing machine was included with the house and that has probably never been cleaned since it was installed 10 or more years ago. The smell is what got me even more than the black stuff that was visible on one small part of the bottom of the rubber lip. Thanks so very much for posting this
Thanks a lot for your comment mate and I'm glad my video was helpful to you. Please remember to subscribe to our channel, as that really helps us 😇 Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/
Great video!! I would like to watch the 2nd video on descaling the machine but it doesn't auto play and I can't find it on the channel. Is there s link to it? Thanks
Great to hear mate! Please remember to subscribe to our channel, as that really helps us 😇 Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/
Thanks a lot for your comment and hope you can get your machine fixed! Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/ Thanks 👍
There's enough time wasters in the world. I try to be open and honest and sometimes I upset the manufacturers but Hayhoe. @mugdymahgoub150 please remember to subscribe to our channel as that really helps us th-cam.com/users/shortse432SAb2g08 Thanks, Paul 👍
Glad I could help @vivianhsu2004 this is for you th-cam.com/users/shortse432SAb2g08 please remember to subscribe as that's what keeps this channel going. Thanks 👍
Thanks a lot for your lovely comment mate. Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/
Thanks a lot for your kind thoughts mate I get very humbled by your comment. All I'm trying to do is teach in the correct way that everyone understands. It would be really helpful for me to get my video shared and help us fight appliance waste! Please remember to subscribe to our channel, as that really helps us 😇 Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/
Thank you so much for all the tips. I’m not sure I can pull my apart but I’ll certainly do the boil wash. I’ve use the dish detergent to clean mine frequently.
Amazing video. Great advice on removing the gunk from around the drum. So many other videos completely leave out that step and even the tip to top up the boil wash and leave it soak
Hi thanks a lot for your comment and I'm glad it helped. It would be really helpful for me to get my video shared and help us fight appliance waste! Please remember to subscribe to our channel, as that really helps us 😇 Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/ Thanks, Paul 👍
Thank you so much for this. I’m in a rental and let’s just say my landlord is not the best. I won’t remove the seal due to rental property but I will try my best to get ride of the mold. Amazing advice
Hi! I live in the States and came across your video looking to see about cleaning the boot on my Maytag. I replaced it about 7-8 years ago when the spider broke and I had to replace that. I bought the spider used on eBay for a good price and learned a lot in the process. Now the boot needs to be cleaned and I wanted to see what a good process would be. Your video was awesome and provided me with just what I needed to know to clean this. Boy, do they get disgustingly dirty! I look forward to going through more of your videos. You're very professional and helpful. I appreciate that and hope business is great for you.👍 Cheers!
Glad it was helpful mate, all I'm trying to do is teach in the correct way that everyone understands! Since we work very hard in our warehouse making free video guides, you can always donate us via www.how-to-repair.com/help/buy-paul-a-beer/ Could you also do me a favour and take part in a poll I've made about the lifespan of appliances? You just need to tick one of two boxes. It will only take about 10 seconds. This might help us improve how machines are made in the future😇 Here's the poll question: www.youtube.com/@How-to-repair/community Also sharing will get more people to participate and we will have a greater impact with the manufacturers thank you for helping.
Glad it helped you mate. Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/ Thanks 👍
Thumbs up, great video. It's a shame that modern machines are only build to last a few years and then it's usually uneconomical to repair the device. Learned a lot and will try it on our Miele machine on which I repaired the electronic last year.
Built-in obsolescence is a such a con from the manufacturers. They are trying to make it harder to repair the appliances. All they want us to do as consumers is consumer. glad we could help you @roccosims this is for you th-cam.com/users/shortse432SAb2g08 please remember to subscribe as that's what keeps this channel going. Thanks 👍
Absolute class video! It well and truly gave me the confidence to do this all by myself and take the washing apart with not having to worry. Thanks so much buddy 👌🏼👍🏼!
Glad it was helpful! Thank you for leaving a comment this is for you th-cam.com/users/shortse432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍
Really glad it helped you fix your problem Thank you for leaving a comment this is for you th-cam.com/users/shortse432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍
Thank you very much for your guidance and clear instructions. It made me feel comfortable taking everything apart and I'm glad that the washing machine won´t end up being thrash. I made a little donation for your great work!
Thank you very much for the donation. It is really really appreciated. There are not many people like you who realise the amount of work that goes into making these videos. What would really help me to get my video seen as I'm no IT expert is to either share the channel or at least post it to your friends my videos might not be TH-cam superstars, but they save Appliances from the scrapheap. Share and help us fight appliance waste! @JugglingIsNotACrime please remember to subscribe to our channel as that really helps us th-cam.com/users/shortse432SAb2g08 Thanks, Paul 👍
Any time! glad we could help you @garywinkworth3380 this is for you th-cam.com/users/shortse432SAb2g08 please remember to subscribe as that's what keeps this channel going. Thanks 👍
Hi thanks a lot for your comment and I'm glad it helped. It would be really helpful for me to get my video shared and help us fight appliance waste! Please remember to subscribe to our channel, as that really helps us 😇 Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/ Thanks, Paul 👍
Just watched your video and you make it so easy to follow the steps even if you're not knowledgeable. I will certainly use this information on my Grundig. I would love to see something on maintaining a dual purpose washer dryer machine. Regards from Cape Town, South Africa 🇿🇦
Thank you for leaving a comment this is for you th-cam.com/users/shortse432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍
This video and one of your others has saved my hotpoint ultima going to the yard. We were getting black dots over our clothes from the mold. I removed and cleaned the seal and the powder chamber and hose and the jets. Likely original cause of the problem was the jets blocked with limescale. All cleaned out now and £500 on a new machine saved.
Hi thanks a lot for your comment and I'm glad it helped. It would be really helpful for me to get my video shared and help us fight appliance waste! Please remember to subscribe to our channel, as that really helps us 😇 Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/ Thanks, Paul 👍
This was a most informative video and makes a change from the tv adverts trying to sell me calgon tablet things implying using them will result in a effortless repair etc 😀
Thank you for leaving a comment, I would love you to leave your opinion on our poll about manufactures building in obsolescence to appliances. th-cam.com/users/postUgkxygHomnUySd_bYjaJBdEHPO6T4dYo9Ahm and this is for you th-cam.com/users/shortse432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍
Great video. Thanks. I managed to save our 7y old Siemens washer, partly with the of a technician. But changing the nozzle plate would be prohibitively expensive, and so far it is still working, although the scaling is bad. I hope the next video will show how to deal with that. The machine is so unnecessarily difficult to maintain. Taking out the nozzle plate for descaling should and as far I can see could be very easy, yet I need to remove the whole front of the machine. One thing that I found very difficult was to the belch back on. I had to have my wife help me there. Really just needed and extra hand. The technician also has a VERY hard time getting it back on (a lot of curse words). So maybe a slight warning to people before they remove the belch.
Mate, I've been working up the gumption to do this thing for months, and every time I go over the procedure, its your videos I look for. I've watch tons of these videos by other youtubers and despite you being the only one that seems to know what he's talking about you were 19th on the list, with a couple of shorts bars, too, when I just searched this time.
If anyone else reading this knows how to help with the algorithm, this man Deserves it. Someone with expertise explains as well as instructs, and - definitely in my case - provides the confidence you may need.
We need the experts at the top.
Its lovely weather here today, and I've got some time. Will post once I've got the machine to 1st wash.
I'm very humbled by this comment and appreciate your support. There are many TH-camrs who make videos just for money, but they don't always have the knowledge to back it up. I've been on TH-cam since 2006 and started just to help friends. Over the years, my channel has grown quite large because of the consistent information I provide.
I will continue to make long, perhaps boring, videos with relevant and correct information rather than just flipping a video for money. I will always hold manufacturers accountable when they produce rubbish for profit instead of quality products for consumers. Thanks again for all your support.
Hi thanks a lot for your comment, and I'm glad to receive your thoughts. It would be really helpful for me to get my video shared and help us fight appliance waste! Please remember to subscribe to our channel, as that really helps us 😇
Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/
Thanks, Paul 👍
I can't believe I forgot to subscribe - that's it done. I did the procedure yesterday. The seal is clean, but there are still a little spots of black staining on the inside part and I had to get the machine back in working order first thing, so there was no time for more soaking - I have to admit I only turned and scrubbed it one time about thirty minutes after I first put it in to soak overnight, but I've got some Segemur Gel I bought before I found out about the conditions on the inside of the machine coating it now.
I followed the 90° wash with the rags, dishwasher tablets, squirt of bleach, water-fill-top-up, and suspending the wash at it's peak temperature, (for about an hour - forgot), before resuming the full wash. The results were perfect: the smell from the machine is GONE - it smells brand new - and I'm more than happy with the seal -even if the Segemur is a bust.
Now for the bad news: as soon as I started removing the front panel, I realised it was corroded - causing the paint to bubble under the soap drawer, and across a significant amount of the bottom of the panel just above the strip with the filter trap access thing. I'm in the middle of a bunch of household decorating and I've got everything I need to remove it , sand it, and respray it, but I'll have to find out if this is a viable or wise way to keep him out of the landfill - getting quite fond of the little guy now. Will check your videos to see what's there, now. Thank you for all this, mate - this was a lot more fun than a reasonable man might expect. 👍
@@NeilThomson-f7tYou know what, i like both of you. Paul for the outstanding work, dedication and pure genuine will to help and you for your recognition and appreciation. I myself watched a few videos before discovering this one, and yeah the others did get it clean but not anywhere to the level of thoroughness of this here. I’m just going to quickly look up a video on how to remove the front panel on a Samsung (i don’t want to remove any screws more than necessary) and I’ll get right on it.
As for the algorithm, TH-cam has been weird about it as of late, most creators have been struggling to crack it but generally it’s the usual stuff that help, liking subscribing sharing but especially commenting. The video needs movement and circulation, or soak wash rinse spin so to speak :)
Anyway, cheers to you both and remain kind, gentlemen!
I think you need to do a series of shorts from this video to get more views. I just spent half a day scrubbing the horrible black mould out of my rubber seal on the Hotpoint washing machine and the effing stuff is back and now I know why. I used the HG Mould Remover Foam Spray, Mould Spray & Mildew Cleaner, it comes out like a foam and it is very good but I had to treat it 3 times. I don' know if I have the gumption to open the whole thing up and try and take out the rubber seal.
Hands down the best "how to clean a washing machine" video out there .
Made Simple, easy to understand and explained perfectly each step and all of that in a calming voice.
Ps: keeping the environment in mind at all times was the cherry on top👌
Wow, thanks that one nearly go a tear thank you! Thank you For leaving a comment this is for you th-cam.com/users/shortse432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍
00 www
100% agree with you
Also 100% agree
Definitely, great video, I used to change the brushes in my mum's washer when I was a teen, many moons ago.. my Hotpoint just complained about F05 so I thought I best brush up on my knowledge, glad I did 10/10 👌😎
Manufacturers hate videos like this. Continue the good work.
Yes, I agree, you could say I'm one of the most popular people with them. lol Vincent Lee I would love you to leave your opinion on our poll about manufacturers building in obsolescence to appliances. th-cam.com/users/postUgkxygHomnUySd_bYjaJBdEHPO6T4dYo9Ahm
and this is for you th-cam.com/users/shortse432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍
What a nice and honest man. We need more ppl like you. I Appreciate this step by step video and the work
Thanks please remember to subscribe as that's is was keeps this channel going. Thanks 👍
I have been trying to get the smell, gunk in between the drums and the nasty mold off the rubber seal for a long time. You are the only person that has solved my problem! Thank you!
I'm humbled, thanks for your comment mate. I will use your donation to upgrade my video quality.
Wow I have watched 20+ tutorials for our Samsung washing machine trying to figure out how to deep clean it and remove the lime scale and mold/mildew build up because it’s ruining our clothes! I use the washer’s self cleaning option and several different washer cleaners regularly and still the hard water and family laundry have destroyed this machine’s ability to function well in just a couple years. Soooo grateful for this video - I have hope that I can save the washer without having to replace it. Thank you!!!
Best video ever, well and honestly explained
In a word Brilliant.
And from a Scotsman that says a lot.
Great work mate, first time I have seen your channel
My wife now has dementia so I have for my first time ever in 70 years done a wash and realized how much the machine needs to be deep cleaned, wish me luck.
Cheers again and thank you for the detail in your presentation.
The right to repair.
These kinds of videos are important, and huge thanks to the people who take the time to make those videos.
NOTE: a Siemens IQ700 must not be turned off at the main switch while the program is running, then it will start from the beginning 🙂
This is the first TH-cam video that I didn't skip. Your calm and steady explanation is easily understandable for ESL speaker like me. Thank you
We purchased our front load whirlpool washer and dryer about 3.5 years ago. I’ve typically just done tub clean cycles using afresh tabs thinking that was sufficient. Just a few days ago I looked more in depth at the washer and was stunned by the amount of dirt and black mold that had accumulated in the rubber door seal. This video is exactly what I’ve been looking for for in depth cleaning and maintenance. Thank you for putting together a thorough video explaining how to tackle this project, your time and efforts are well appreciated!
Thank you for leaving a comment this is for you th-cam.com/users/shortse432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍
We have a Samsung WF218ANW with practically the same setup as the washer in this video, and I followed your instructions to the letter. I’m happily listening to the initial wash on highest and longest setting after it’s all back together again. I could NOT believe the foul gunk that had build up over the years. You’re a life saver!! Thank you for all your hard work and ability to make it easy to follow along. Much appreciated. 🙂🙂
yes it's hard to believe we are all washing clothes in it. thanks 👍 for watching and please remember to subscribe to the Channel as that's what keeps us going in able to make the video for you
I'll second that
Thank you, thank you!!! Your step by step video was perfect to restore my 20 year old machine. The mould on our door seal was much worse than in your video. We had tried all sorts of products with no success. Unbelievably the seal looks brand new!!!! I was in total shock! We then did the drum clean and wow, the colour of the water was gross. Thank you for sharing your expert knowledge and saving us hundreds of dollars in servicing costs!!
You earned my subscription only 3 minutes in. Repair not Replace is something I try to live by myself, so it is always a delight when I find people who share that approach. Massive respect, looking forward to checking out the rest of your content!
Thanks for the sub!
Same here subbed in a few minutes. I am blessed to have a 20+ year old speed queen washer
Brilliant. Was very close to getting rid of my washing machine due to it making my clothes smell. Thanks very much for putting this video together... is hugely helpful!
Subscribed!
That was utterly brilliant.
Nothing has ever been presented as well as this.
I am very grateful for this video. I rarely comment but really want to boost your channel.
I am not an appliance repairman.
I have however used your videos to repair my dishwasher and my washing machine over the years.
Cost to me of about £80 in parts and about 3 hrs of my time. (I'm not as quick as you at disassembly/reassembly)
You have saved me hundreds of £ 👍
allways here to help, where i can
I got on TH-cam to find out how to drain my washer and came across your video. I have just purchased a new washing machine due to mould. It will be here later on this afternoon. I really wish l had seen your video before. So nice of you to share the tips that majority of people have no clue about 👏🏼 like my silly self 😂
You’re the best! I’ve managed to clean my machine to perfection & also gotten a bra wire out through the heating element hole thanks to your easy to follow tutorials! Thanks so much! ❤ xx
I can’t believe that I have just watched this at 7:30 on Sunday morning as I’m laying in bed!
Great instructions and tips and I’m ready too have a go…..
we have been leaving the door and draw open on our washing machine ever since we got it (3 years ago) and i have to say it really does make a difference it’s never had mould once it looks like new and it’s always had a nice clean smell. compared to when we had our old one that one was very mouldy as we always kept it all shut and it really did have an unpleasant smell. this is a very useful video indeed 👍
Same here.👍
I also found a babies bottle brush was handy when cleaning the roof of the soap dispenser compartment & other hard to reach parts.👍
It certainly helps, but not forever! Still, it's given me a few extra years before needing to intervene.
I do the same and I use a boil wash at least once a week
Three minutes into this video and I already have to hit pause, the Like button and leave a comment praising your message on the environmental impact not only of this industry but also of our own choices. Thank you! More people should listen to this.
This is truly a tremendous tutorial!
Fantastic to know about you and your critical efforts to help us save the planet! Addressing this issue of no longer being able to repair machines (from cars to all appliances etc, etc) is seldom being discussed much less helping us do as much as we still can--and initiate and support governmental regualtions to reverse this movement by corporate entities. BRAVO!
The problem being there are not enough people standing up to the manufacturers with the built-in obsolescence and the UN environmental way the profits always come first Glad it was helpful! Thank you for leaving a comment this is for you th-cam.com/users/shortse432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍
❤excellent
Incredible.
I realise now that most washing machine cleaning videos are completely inadequate.
Thank you so much for sharing your knowledge and skill.
I get very humbled by your comment. All I'm trying to do is teach in the correct way that everyone understands. It would be really helpful for me to get my video shared and help us fight appliance waste! Please remember to subscribe to our channel, as that really helps us 😇
I will continue to invest the beer donations that I receive predominantly into the new video technology that I'm learning with tracking cameras and better audio to make it easier for everyone to understand.
I'm also employing someone now to assist me in my workload. You can support us by donating to our website www.how-to-repair.com/help/buy-paul-a-beer/
Without doubt, the best washing machine cleaning video that I've ever seen (and I've watched a few)
Evening Paul. Thanks very much for the video. We have a Hotpoint Smart Tech. WMFUG 942P. Wife's been complaining about a smell. So yours truly manned up and removed the gasket washed as you suggested and reinstalled. All from the front.👍🏻. Never done that before!!
But thanks to your advice wife is almost happy. 😄😄. A beer is on its way.
I can only repeat most of the previous comments. Excellent video, informative, concise, every piece of info needed to complete the job. Please keep making these videos , all the best to you.
You are a god. Saved me $640 in repairs, or $1000 buying a new one. Thank you.
Really glad you managed to get your machine clean again What would really help me to get my video seen as I'm no IT expert is to either share the channel or at least post it to your friends my videos might not be TH-cam superstars, but they save Appliances from the scrapheap. Share and help us fight appliance waste! @fiveshorts please remember to subscribe to our channel as that really helps us th-cam.com/users/shortse432SAb2g08 Thanks, Paul 👍
@@How-to-repair done and done.
A-M-A-Z-I-N-G !! Thank you so much. Your video is the best one on how to clean that rubber seal. It’s been bugging me for years. And I appreciate very much your explanation on why these machines are built that way. So wrong.
I think you just my washing machine AND my laundry. Tried all the surface tips from other sites to no avail. I was starting to despair when I happened upon your video! Thank you thank you!
Thank you so much - having watched your video I plucked up the courage to clean out my machine - and then watched through again step by step as I actually did it. I had to get help putting the inner spring back on but otherwise managed the whole thing by myself - my Dad was aghast when I sent him the photo when I’d dismantled everything 😂
This was so helpful and I am delighted to no longer be pulling my laundry out of the machine and find greasy streaks.
Saved me having to pay someone else too who I’m sure would have just replaced the seal and not done the full clean ie back to square one in no time.
Hugely appreciative and will be sharing with all the friends who have the same problem with washing machine gunk!
Huge thanks for your lovely comments and I'm very glad you did it by yourself. Please remember to subscribe to our channel, as that really helps us 😇
Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/
Thanks, Paul 👍
Great video, it's very nice that a professional like you shared information about cleaning and maintaining the washing machine. Thank you so much for this video and your work. Good job.
I can't beleive how good this actually worked.I had serious doubts if i could get the seal cleaned.I thought for sure I was going to have to spend $150 on a new bellows (door seal).
Thanks so much for putting out tried and true information!!
Glad I could help you. if i make a video its the truth, Thank you For leaving a comment this is for you th-cam.com/users/shortse432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍
Thank you so much for this! I need this today as my washing came out smelling so I need to do a good deep clean with it. I also love the mentality that we need to repair and try and prevent waste when things just need a little work to fix. My sister always gets rid of things when they just need a good clean, it drives me mad.
Glad it was helpful! Thank you for leaving a comment this is for you th-cam.com/users/shortse432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍
brilliant video! I'm all for maintaining the old working stuff we have. This is the most conclusive video on this subject, thanks for sharing!
Glad it was helpful! Thank you for leaving a comment this is for you th-cam.com/users/shortse432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍
I'm really glad I watched your video. I tried to do something similar before with dishwasher tablets but it didnt work. However, I thought ile give it another try. I used 3 tablets & put the machine on a boil wash, but also raised the water levels up higher in the drum as was suggested. My machine now smells as fresh as a daisy. Thank you.
This is a brilliant video from a very experienced & knowledgeable engineer. The explanation was slow (great) and well-structured to follow. Anyone can follow it to help save the CO2 footprint in buying a new machine. Wish I saw this video before as I had to throw a molded seal for a new one. I did clean it with white Vinegar and bicarbonate soda and it did not work.
We do leave the door and soap box open after every wash but the same problem on my Bosch machine appeared. Cloths getting mold on them.
So this time, I have followed the video and cleaned all the pipes, soap box, and door seal. Today I have submerged every item in a bleach solution and will check the result tomorrow. I added two 750 ml of bleach and added warm water to bring it to some level to enable submerging the items.
One question is that should I have just submerged the items in raw bleach or would the solution I have prepared do, as it is not clear in the video.
An amazing in-depth tutorial! Thank you for sharing your knowledge and tips. Hands down the best tutorial about how to clean a washing machine! Subscribed.
Brilliant, thanks for sharing. The only comment I need to make as a person who's been sick due to mold, is: please, while cleaning or dealing with mold in any way, you must wear a proper mask, googles and cover ears and skin. Mold is a serious issue, and people don't know it.. thank you!
A beautiful presentation. Many good tips. Thanks for sharing this experience. 💐💐💐
What a nice gentleman, thank you for the tutorial!
My pleasure!
Thank you sir for doing the video. Your video is the best by far. You are explanation is clear and easy to follow. All I wanted was to figure out how to get rid of the mold in the door seal. I am so glad I watched it...Grossed out but enlightened and empowered. I have just sent this link to friends and subscribed. Thank you!
Valuable, valuable video. I hope to use this to clean my uncle’s washer (I’m temporarily living with him). It has mold, gets a smell particularly after any kind of warm or hot water wash, and has gunk built up like mud between the drum barrel and door seal. It clogs even the drainage holes in the door seal rubber. Nasty stuff.
My uncle-an engineer-has treated the mold and moisture issue as a just a design flaw. He does the recommended maintenance tips given at the end (minus the dishwasher tablets and rags with a boil cycle). Also, the model he has does not have an easy access to even a filter that could be cleaned from the front.
Yeah. I’m gonna ask If I can take two days to do all of this maintenance on his washer. If he has never done any kind of cleaning like this on the washer-and I’m gonna advocate about the dirty mud and mold that gets on my clothes, and just flat out mold exposure-to see if this is an option we can try. I’m sure he would be happy with the cost effective solution versus purchasing anything new. As long as he does not say no for the reason of “I’m fine the way it is.”
Agree that this is the best cleaning video I've encountered., Will go after it presently.
The thoroughness and explanation are exceptional. Thank you!!
Wow, thanks for some really great tips. After every wash I dry the rubber and door, however I must do a deep clean wash as you suggested at the end of the video. Thanks very much.👍
I'm glad my video was helpful to you mate. Please remember to subscribe to our channel, as that really helps us 😇
Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/
Thanks for showing how to install the rubber back , i belive that 90 %of us are here for that
I'm really pleased the video was helpful to you. Could you do me a favour and take part in a poll I've made about the lifespan of appliances? You just need to tick one of two boxes. It will only take about 10 seconds. This might help us improve how machines are made in the future😇
Here's the poll question: www.youtube.com/@How-to-repair/community
Also sharing will get more people to participate and we will have a greater impact with the manufacturers thank you for helping.
Great Video! I repair also many years. People simply buy new machines too quickly. Greetings from Germany David
Thanks 👍 With Global leaders bickering and arguing over global warming, consumers and businesses need to more, the wastage in the United Kingdom alone is just too much. and Germany will have the same problem
Yes you are right! I'm just helping out the neighborhood. My job is actually a different one, but I've been doing this out of a hobby for a long time. You're doing a great job keep it up.
My mmm n
Yea I’m
I î
U
I
Thanks
I did as you recommended and washer is now clean as a new one. This is an inexpensive and great DIY way to get the job done the right way.
Glad it was helpful! Thank you for leaving a comment this is for you th-cam.com/users/shortse432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍
I'm going to recommend ur channel to Millions!!! You are truly a life saver!!
thank you Thank you For leaving a comment this is for you th-cam.com/users/shortse432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍
Thanks!
Thanks a lot for your donation mate. I will use it to upgrade my video quality. Please don't forget to subscribe to our channel as that really helps us!
Thanks, Paul 👍
Wow, wow, wow!!!! Come to Canada and live with us! ❤ you honest man you. Thank u so much. My husband will surely be as enthusiastic as you are (I have no doubt) when I show him your video and ask him, please, please can he do this to our machine. Smile thanks again.❤❤❤
Wow!! you are truly amazing. My Miele washing machine had a drain problem, water level problem and bad smell.
Wth of your videos I fixed, I took it apart to pieces, unclogged and cleaned everything, now it is like new. Thank you so much
Hi @yuvalpeleg7109 thanks a lot for your comment. It would be really helpful for me to get my video seen, as I'm no IT expert, to either share the channel or at least post it to your friends. My videos might not be TH-cam superstars, but they save Appliances from the scrapheap. Share and help us fight appliance waste! Please remember to subscribe to our channel, as that really helps us 😇
Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/ Thanks 👍
Will you please provide the part 2 of this video? I’m unable to find it. Thank you
this is exactly what I needed, thank you so much for taking the time to put together such a comprehensive video. as others have said, what a decent chap you are! I have been cleaning the gunk from inside the lip of the seal but the bad smell would always return and occasionally some items in a wash would get strained from a stray piece of gunk! yuck! so glad to find out I can take it apart and get at the rest of the gunk. I am weirdly looking forward to giving it all a good clean 🤣
Glad it was helpful! Thank you for leaving a comment this is for you th-cam.com/users/shortse432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍
Absolutely brilliant - thank you so much for all your knowledge. The amount of videos I have seen which don't even get close to this level of clean - I kept wondering how they were actually truly cleaning all the inner workings.
Really looking forward to cleaning tomorrow 👍
Glad to help Thank you for leaving a comment this is for you th-cam.com/users/shortse432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍
As a washing machine engineer for 30 years now retired cleaning the door seal with bleach is something I used to do regularly on recon machines for resale. On the Bosch machine like the one you featured I used to take the seal off without removing the front panel. Its a bit of a struggle putting the spring back on the tub securing the seal but not too difficult
So glad I landed on this excellent video. My samsung is 9 years old and I have the privledge of living in a beautiful and genreally hot part of Australia, but even so the seal finally started sheding crud on to the clothes even after ensuring the soap draw and cabinet are never left closed. Followed the steps and the maachine is as good as new. Thanks so much.
Easy to follow, comprehensive, and highly practical info....thank you for producing and sharing this video.
Glad you enjoyed it! Thanks please remember to subscribe as that's is was keeps this channel going. Thanks 👍
So funny, just bought a house that came with this washer. So glad I found you,, my washer will be clean shortly.
Really glad it helped you fix your problem Thank you for leaving a comment this is for you th-cam.com/users/shortse432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍
This is one of the best youtube videos out there! Thanks gentleman for this informative video! I’m going to do what you did exactly and get rid of that disgusting buildup in my washing machine
Glad it was helpful! Thank you For leaving a comment this is for you th-cam.com/users/shortse432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍
I have to conference, I threw away a 2 year old front loader washer because of this problem, years ago. Now I’m so confident that I’m doing it my self today. Thank you, I have the door seal out and is disgusting the amount of buildup is incredible, we were just about to get a new one but you just saved me from making that mistake again. Thank you 🙏
I got it all out and I’m not going to clean it until my wife comes from work, I’m sure going to score some points today!!! 😂
Again thank you!!! 🙏🙏🙏🙏
Absolutely awesome video on how to deep clean a machine. How the door seal came out was just astonishing. Will now try the trick with the dishwasher tablets and the rugs, because I suspect the outer side of my drum being very dirty. Thank you so much for this super-informative video!
Really glad I could help it's not a long process but it makes such a difference. Please remember to subscribe to the channel is that helps us glad we could help you @martinschrodt5797 this is for you th-cam.com/users/shortse432SAb2g08 please remember to subscribe as that's what keeps this channel going. Thanks 👍
You have a great channel here.
Very informative and professional work.
I don't know how you do it in Britain, but we in Eastern Europe actually split the sealed tub, replace the bearings and reseal in back with epoxy.
It is not always an ideal solution, and the work is tedious, but it can be done.
Wow! Thank you so much for all that info. This will certainly extend the life of my machine! 👏👏👏👏🇨🇦
Great video. My Bosch washing machine is 15 years old! I clean it regularly.
That is awesome! Thank you for leaving a comment, I would love you to leave your opinion on our poll about manufactures building in obsolescence to appliances. th-cam.com/users/postUgkxygHomnUySd_bYjaJBdEHPO6T4dYo9Ahm
and this is for you th-cam.com/users/shortse432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍
I can’t believe how much gunk came out of that washing machine!!!!
Brilliantly explained video - I just wouldn’t trust myself to take the WM apart, AND manage to get it back together 😂
Glad it was helpful mate! I get very humbled by your comment. All I'm trying to do is teach in the correct way that everyone understands. It would be really helpful for me to get my video shared and help us fight appliance waste! Please remember to subscribe to our channel, as that really helps us 😇
Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/
TYSM. I was given an awesome washer by a sweetheart but they bought it off someone else and didn't know to check for anything. They know now. The front loading washer was left in storage wet and clearly evident never properly maintained or even cleaned. Full of debris, mold and even what looked like a dryer sheet smh filter was disgusting and over full. Unfortunately I'm not only allergic to mold I have asthma. I cleaned the filter, dispenser drawer and tried to clean the seal. I ran a self cleaning mode with a powdered cleaning solution specifically for getting to everything. Worked except for the door seal. Problem is because of my allergy to mold and my asthma I had respiratory issues for 2 days after. I came here to see how to safely and properly take the seal off so I can soak it and can't thank you enough. At least now I have a method to clean the seal, which is the main mold problem area, and will help me get this done quickly so I don't have to go into another episode. So, thank you again 🙏🏻🙏🏻🙏🏻🥰🥰🥰
Thanks!
Thank you very much for the generous donation if you ever need any further help feel free to contact me through the website and I'll be happy to assist you
Whoooaa. The amount of Gunk inside that seal when you removed and it made me want to try that next time but for now I'm just pulling the liner open as much as I can and getting what I can get with a scrub brush and white vinegar and soda after having tried bleach and before that hydrogen peroxide and Dawn. The washing machine was included with the house and that has probably never been cleaned since it was installed 10 or more years ago. The smell is what got me even more than the black stuff that was visible on one small part of the bottom of the rubber lip. Thanks so very much for posting this
Thanks a lot for your comment mate and I'm glad my video was helpful to you. Please remember to subscribe to our channel, as that really helps us 😇
Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/
thanks 👍🏽 but
have failed to find the descaling video if you could be kind to reply with the link that would be very helpful
I can't find it either 😢
Great video!! I would like to watch the 2nd video on descaling the machine but it doesn't auto play and I can't find it on the channel. Is there s link to it? Thanks
This worked a treat for me. Thanks for sharing 👍
Great to hear mate! Please remember to subscribe to our channel, as that really helps us 😇
Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/
You are brilliant for explaining this so clearly. I just wish I had the time and energy to actually do it.
Thanks a lot for your comment and hope you can get your machine fixed! Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/ Thanks 👍
You are very honest and not waisting the time like others
There's enough time wasters in the world. I try to be open and honest and sometimes I upset the manufacturers but Hayhoe. @mugdymahgoub150 please remember to subscribe to our channel as that really helps us th-cam.com/users/shortse432SAb2g08 Thanks, Paul 👍
I saved about $1200 by watching your video! I don't need to buy a new washer anymore, just need to clean it as you said.
Glad I could help @vivianhsu2004 this is for you th-cam.com/users/shortse432SAb2g08 please remember to subscribe as that's what keeps this channel going. Thanks 👍
This is probably one of the best videos I've ever seen. Thank you! 😊
Thanks a lot for your lovely comment mate. Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/
Thanks for making such a helpful video. This is a very impressive tutorial. Your positive attitude and practical tips are greatly appreciated.
Thanks a lot for your kind thoughts mate I get very humbled by your comment. All I'm trying to do is teach in the correct way that everyone understands. It would be really helpful for me to get my video shared and help us fight appliance waste! Please remember to subscribe to our channel, as that really helps us 😇
Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/
Thank you so much for all the tips. I’m not sure I can pull my apart but I’ll certainly do the boil wash. I’ve use the dish detergent to clean mine frequently.
Amazing video. Great advice on removing the gunk from around the drum. So many other videos completely leave out that step and even the tip to top up the boil wash and leave it soak
Hi thanks a lot for your comment and I'm glad it helped. It would be really helpful for me to get my video shared and help us fight appliance waste! Please remember to subscribe to our channel, as that really helps us 😇
Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/
Thanks, Paul 👍
Thank you so much for this. I’m in a rental and let’s just say my landlord is not the best. I won’t remove the seal due to rental property but I will try my best to get ride of the mold. Amazing advice
Awesome video thankyou very much. I leave the door and draw open but still smells. Will follow your directions
Hi! I live in the States and came across your video looking to see about cleaning the boot on my Maytag. I replaced it about 7-8 years ago when the spider broke and I had to replace that. I bought the spider used on eBay for a good price and learned a lot in the process. Now the boot needs to be cleaned and I wanted to see what a good process would be. Your video was awesome and provided me with just what I needed to know to clean this. Boy, do they get disgustingly dirty! I look forward to going through more of your videos. You're very professional and helpful. I appreciate that and hope business is great for you.👍 Cheers!
Glad it was helpful mate, all I'm trying to do is teach in the correct way that everyone understands! Since we work very hard in our warehouse making free video guides, you can always donate us via www.how-to-repair.com/help/buy-paul-a-beer/
Could you also do me a favour and take part in a poll I've made about the lifespan of appliances? You just need to tick one of two boxes. It will only take about 10 seconds. This might help us improve how machines are made in the future😇
Here's the poll question: www.youtube.com/@How-to-repair/community
Also sharing will get more people to participate and we will have a greater impact with the manufacturers thank you for helping.
Thank you for the videos!! I am living in South Africa.. And you helped me alot!! Thank you very much.
Glad it helped you mate. Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/ Thanks 👍
Thumbs up, great video. It's a shame that modern machines are only build to last a few years and then it's usually uneconomical to repair the device. Learned a lot and will try it on our Miele machine on which I repaired the electronic last year.
I completely agree with you about repair instead of replace. Thank you for the video
Built-in obsolescence is a such a con from the manufacturers. They are trying to make it harder to repair the appliances. All they want us to do as consumers is consumer. glad we could help you @roccosims this is for you th-cam.com/users/shortse432SAb2g08 please remember to subscribe as that's what keeps this channel going. Thanks 👍
Absolute class video! It well and truly gave me the confidence to do this all by myself and take the washing apart with not having to worry. Thanks so much buddy 👌🏼👍🏼!
HOLY COW THIS IS THE BEST VIDEO.. EVER! Literally saving us money!
Thank you for such thorough instructions. I realize all machines vary - but your video definitely gives me the power to tackle this!
Glad it was helpful! Thank you for leaving a comment this is for you th-cam.com/users/shortse432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍
This is the best video. Very easy, clear and interesting. Thank you. You saved me some money.
Really glad it helped you fix your problem Thank you for leaving a comment this is for you th-cam.com/users/shortse432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍
Thank you very much for your guidance and clear instructions. It made me feel comfortable taking everything apart and I'm glad that the washing machine won´t end up being thrash. I made a little donation for your great work!
Thank you very much for the donation. It is really really appreciated. There are not many people like you who realise the amount of work that goes into making these videos. What would really help me to get my video seen as I'm no IT expert is to either share the channel or at least post it to your friends my videos might not be TH-cam superstars, but they save Appliances from the scrapheap. Share and help us fight appliance waste! @JugglingIsNotACrime please remember to subscribe to our channel as that really helps us th-cam.com/users/shortse432SAb2g08 Thanks, Paul 👍
that was the best info ive seen on how to clean your machine. thanks so much mate
Any time! glad we could help you @garywinkworth3380 this is for you th-cam.com/users/shortse432SAb2g08 please remember to subscribe as that's what keeps this channel going. Thanks 👍
Wow, that is great video!!!! 👍 thank you for sharing this information.
Hi thanks a lot for your comment and I'm glad it helped. It would be really helpful for me to get my video shared and help us fight appliance waste! Please remember to subscribe to our channel, as that really helps us 😇
Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/
Thanks, Paul 👍
Just watched your video and you make it so easy to follow the steps even if you're not knowledgeable. I will certainly use this information on my Grundig. I would love to see something on maintaining a dual purpose washer dryer machine. Regards from Cape Town, South Africa 🇿🇦
Thank you for leaving a comment this is for you th-cam.com/users/shortse432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍
This video and one of your others has saved my hotpoint ultima going to the yard. We were getting black dots over our clothes from the mold. I removed and cleaned the seal and the powder chamber and hose and the jets. Likely original cause of the problem was the jets blocked with limescale. All cleaned out now and £500 on a new machine saved.
Hi thanks a lot for your comment and I'm glad it helped. It would be really helpful for me to get my video shared and help us fight appliance waste! Please remember to subscribe to our channel, as that really helps us 😇
Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/
Thanks, Paul 👍
This was a most informative video and makes a change from the tv adverts trying to sell me calgon tablet things implying using them will result in a effortless repair etc 😀
Thank you for leaving a comment, I would love you to leave your opinion on our poll about manufactures building in obsolescence to appliances. th-cam.com/users/postUgkxygHomnUySd_bYjaJBdEHPO6T4dYo9Ahm
and this is for you th-cam.com/users/shortse432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍
Wow this is great cleaning 👏🏻 😍 👌 thanks 👍👍👍
Great video. Thanks. I managed to save our 7y old Siemens washer, partly with the of a technician. But changing the nozzle plate would be prohibitively expensive, and so far it is still working, although the scaling is bad. I hope the next video will show how to deal with that. The machine is so unnecessarily difficult to maintain. Taking out the nozzle plate for descaling should and as far I can see could be very easy, yet I need to remove the whole front of the machine.
One thing that I found very difficult was to the belch back on. I had to have my wife help me there. Really just needed and extra hand. The technician also has a VERY hard time getting it back on (a lot of curse words). So maybe a slight warning to people before they remove the belch.
I'm glad we could help have a good New year
How good was this young man he was excellent explaining everything thank you.!!
I really do appreciate the young man statement I'm glad you enjoyed the video please remember to subscribe to the channel