VW Tuareg Traction Control, P0730, 01314 [ Stop Fault Running Gear Fixed ]

แชร์
ฝัง
  • เผยแพร่เมื่อ 5 ก.ย. 2024
  • tuareg tcm no communication, four wheel not functioning, stop fault running gear fixed, including p0730, 01314, transmission incorrect gear ratio

ความคิดเห็น • 12

  • @edwinReyes-ml3ln
    @edwinReyes-ml3ln 29 วันที่ผ่านมา

    Good afternoon, I would like to know how I do the suspension because my 2004 Volkswagen is not doing it.

  • @borismello3589
    @borismello3589 ปีที่แล้ว

    I had the same problem with my 2005 Touareg, my mechanic solved the issue by replacing 2 tires, apparently all 4 tires have to match, issue solved.

    • @skylineraver8621
      @skylineraver8621 10 หลายเดือนก่อน

      Thank you

    • @lochardlaguerre1475
      @lochardlaguerre1475 4 หลายเดือนก่อน

      I have a touareg 2008, and it might have the same problem because i change 2 tires in the front. 2 in the front 265/65/17 and the back ones are 255/60/17. When i accelerate around 40mph there is a big noise like my shaft is broken. I will try to match all tires to see how it goes like you did. Thank you so much for sharing

  • @WelliDS
    @WelliDS ปีที่แล้ว

    What software were you using in your phone to scan it?

  • @cataliniovu1599
    @cataliniovu1599 ปีที่แล้ว

    I have same error. And the buttonn for 4x4 from inside int not have power. Do you know which are the fuse for that? Thank you

  • @Alennovak666
    @Alennovak666 2 ปีที่แล้ว

    I have faulty procesor fault 0003, you know what could be ?

    • @drcoolautofix
      @drcoolautofix  2 ปีที่แล้ว

      Whats the symptoms?

    • @Alennovak666
      @Alennovak666 2 ปีที่แล้ว

      @@drcoolautofix
      Suspension dont work, and red letters say running gear fault or something like that. And i have that fault 00003 -014 defective ecu for air suspension adress 43 i think

    • @drcoolautofix
      @drcoolautofix  2 ปีที่แล้ว

      Check for Control Module Software Update

    • @Alennovak666
      @Alennovak666 2 ปีที่แล้ว

      @@drcoolautofix i did, its up to date.
      End up changing new ecu for level control and it fox the problem