HOW TO INSTALL HRG 1.5" LIFT KIT for 2nd Gen HONDA CRV 2002-2006

แชร์
ฝัง
  • เผยแพร่เมื่อ 25 ธ.ค. 2024

ความคิดเห็น • 63

  • @Robb0h
    @Robb0h 2 ปีที่แล้ว +13

    That lift and those tires really improved the look of the CR-V! 👏🏻👏🏻👏🏻

    • @CycleFab
      @CycleFab  2 ปีที่แล้ว

      Thank you very much!

  • @adrianperez6120
    @adrianperez6120 2 ปีที่แล้ว +6

    Installing lift kit next weekend, pretty cool video and awesome job explaining step by step.

    • @CycleFab
      @CycleFab  2 ปีที่แล้ว

      Thank you very much! And good luck with your install!

  • @rochelle-ofcoursehatch7912
    @rochelle-ofcoursehatch7912 2 ปีที่แล้ว +2

    Congrats! 🎉Love the new shop vehicle! 🫶

    • @CycleFab
      @CycleFab  2 ปีที่แล้ว +1

      Thank you so much! I appreciate you watching and commenting on my new video.

  • @henrycortez7816
    @henrycortez7816 ปีที่แล้ว +3

    Thanks! Great job, helped a lot

    • @CycleFab
      @CycleFab  ปีที่แล้ว

      Your very welcome, thanks for watching and commenting.

  • @tmchevyman5319
    @tmchevyman5319 8 หลายเดือนก่อน +1

    Great video, Have you noticed a drop in your mpg or ride quality?

    • @CycleFab
      @CycleFab  8 หลายเดือนก่อน

      I installed the HRG 1.5" lift kit a week after I bought my CRV so I can't say that it hurt my mileage. I'm getting 16 mpg HWY so I'm ok with that. The only thing that changed about the ride, is mud tires sing a little going down the road but not bad at all. Also you can tell that it handels differently (not bad different). Just alittle smoother, I think, from just the size of the tires, adds more to the dampening feel of the vehical. Hope this helps, thanks for watching and commenting!

  • @CTMPRODUCTIONSLLC
    @CTMPRODUCTIONSLLC ปีที่แล้ว +1

    Very nice! Great video and tutorial. I literally just bought a HRV today and want to upgrade to bigger wheels and tires, do you think they sell lift kits for a 2024?

    • @CycleFab
      @CycleFab  ปีที่แล้ว +1

      Thanks for the compliment! No, probably not for the 2024 yet. But if you contact HRG they'll be able to answer that. Here's a link to their website.
      hrgoffroad.com
      Thanks for watching and comenting!

  • @mrsantosjon
    @mrsantosjon 2 หลายเดือนก่อน

    Subframe drop not needed im thinking of doing this job thank you

  • @youtubecritic4360
    @youtubecritic4360 ปีที่แล้ว +2

    Any problems after installing the lift? Was it simple as putting in the lift kit and not worrying about anything else? Been thinking of buying one

    • @CycleFab
      @CycleFab  ปีที่แล้ว +1

      No problems whatsoever. You will need to have the front end alined after you install the HRG 1.5" lift kit. good luck with your project.

  • @sebastianricci6517
    @sebastianricci6517 ปีที่แล้ว +1

    Thank you for this. I subbed

    • @CycleFab
      @CycleFab  ปีที่แล้ว

      You are welcome my dude! Thank you for watching and subscribing.

  • @BenjaminHansen
    @BenjaminHansen ปีที่แล้ว +1

    So you did not do a engine drop, where they drop the front drivetrain by 1 inch?

    • @CycleFab
      @CycleFab  ปีที่แล้ว

      No! I didn't need that much lift and I did not want the hassle of axle bind.

  • @Dmoney69424
    @Dmoney69424 ปีที่แล้ว +1

    Where did u get the wheel spacers

  • @Chubbydippin
    @Chubbydippin 11 หลายเดือนก่อน +1

    Ever seen a kit like this that would work for a FWD civic 2020 or newer? Thanks

    • @CycleFab
      @CycleFab  11 หลายเดือนก่อน

      No, I haven't. Good luck with your search.

  • @Wolf4wdadventures.576
    @Wolf4wdadventures.576 ปีที่แล้ว +2

    CRV looks great, what size tyres did you install?

    • @CycleFab
      @CycleFab  ปีที่แล้ว +1

      235/75-R15 Forceum M/T08

  • @johnsmithnonya46
    @johnsmithnonya46 ปีที่แล้ว +1

    I'm seeing a lot of posts with people also dropping the subframe/axles to make up for the stretch to the axles.
    A 1.5 inch lift with a 1 inch subframe drop still stretches the axles .5 inch. I'm curious how your rig is holding up after this lift and if your cv axles are holding up?

    • @CycleFab
      @CycleFab  ปีที่แล้ว

      I paid close attention to my research before buying the 1.5" lift. I did not want to deal with axle bind! HRG told me that anything over a 1.5" lift will need a subframe drop. I only have the 1.5" lift installed and with no negative issues to date. Hope this helps. Thanks for watching!
      Also, be sure and have your front end aligned after the install.

  • @brandonbassett7125
    @brandonbassett7125 ปีที่แล้ว +1

    How much was alignment off

    • @CycleFab
      @CycleFab  ปีที่แล้ว

      I don't remember exactly but it was definitely off. You'll need to get it aligned or do it yourself.

  • @theprodigy8607
    @theprodigy8607 ปีที่แล้ว +2

    What tire size would you recommend? I have a 2006 crv and going to install the same lift kit. But I don’t know what size tires to run. It is a 16 inch rim. I was thinking 225/75/16?

    • @CycleFab
      @CycleFab  ปีที่แล้ว +1

      Mine are 235/75-R15. It took me a good bit of research before I settled on this tire size. Best thing to do is contact the techs at HRG, they will be able to tell you what's the best/biggest size of tire for your 2006. Here's a link to their main page.
      www.hrgoffroad.com/

    • @applepoop10
      @applepoop10 ปีที่แล้ว

      @@CycleFab Could you use 215/75/R15 in order to avoid the rubbing issues?

    • @cstoryusmc
      @cstoryusmc ปีที่แล้ว +3

      just an fyi the 06 crv has a larger diameter front brake package than the older years. they will not fit any 15" wheel without large spacers. i would stick with 16". i have an 06 and bought 15" cragar soft 8 15x8 wheels with a 0 offset and they still wouldnt clear the brakes without a spacer. hope this helps.

  • @maxvandenbosch3858
    @maxvandenbosch3858 ปีที่แล้ว +1

    For off roading is 3 inch better or will 1.5 inch do ?

    • @CycleFab
      @CycleFab  ปีที่แล้ว

      If you go above 1.5" there are other things that become involved as far as the drivetrain (axle binding) and that can get expensive. The 1.5" lift is suitable for my needs such as simple trailing/off roading. Thanks for watching and commenting. I hope this helped.

    • @maxvandenbosch3858
      @maxvandenbosch3858 ปีที่แล้ว

      @@CycleFab Thank you so much for the response. Then i will go for the 1.5 inch so i can also run bigger tires! Im going trailing this fall so building up the car! You're videos have been really helpfull

    • @a12mx
      @a12mx ปีที่แล้ว

      @@maxvandenbosch3858 ideally 1-1.25 does affect like he said. And the 1.5 is just right with the right set of tires. Make sure tires are good

  • @timomomomo969
    @timomomomo969 ปีที่แล้ว +1

    will this fix my rear wheels canting out because the springs are sprung?

    • @CycleFab
      @CycleFab  ปีที่แล้ว

      If you have an issue with your springs then that will need to be addressed another way. A lift kit isn't the answer. Thanks for watching and commenting!

  • @Dolbytube
    @Dolbytube ปีที่แล้ว +1

    Ok,the front spacers are 1" thick...and the rear ones?

    • @CycleFab
      @CycleFab  ปีที่แล้ว

      The front spacers are 1.5" and the rear are 3".

  • @Dolbytube
    @Dolbytube ปีที่แล้ว +2

    Hi,i,can You please tell me what is the maximum wheelsize without any lift,and after the 1,5" lift? I've got 215/65/16 atm and i'm willing to put on a 225/70/16 KO2's or 225/75/16 BFG trail terrain(they haven't got them in 225/70...). I would be very greatfull for any info...

    • @CycleFab
      @CycleFab  ปีที่แล้ว

      235/75-R15 is the largest that you can use with out a lift, BUT! they do rub a small bit. This is on the 2nd Gen CRV, I'm not sure about other generations of this model.

    • @Dolbytube
      @Dolbytube ปีที่แล้ว +1

      ​@@CycleFab Thank You a lot...i just bought 225/70R16 KO2's now i''ll have to wait for a better weather and lift that CRV up! I'm also looking for some information about lifting spacers thickness,front and rear. It's hard to buy HRG or Aerogenics in my country,but there is a kit which comes with 24mm spacers(0,95") . And that's why i'm asking...will it lift to 1.5"

  • @chunyaguilar6581
    @chunyaguilar6581 ปีที่แล้ว +1

    Got the same because your video

    • @CycleFab
      @CycleFab  ปีที่แล้ว

      COOL!! Thanks for watching and commenting.

  • @andreicalancea4158
    @andreicalancea4158 10 หลายเดือนก่อน +1

    What size of tyres have you got on Honda Cr-v after 1.5 lift kit?

    • @CycleFab
      @CycleFab  10 หลายเดือนก่อน +1

      235/75 R15

    • @andreicalancea4158
      @andreicalancea4158 10 หลายเดือนก่อน +1

      What brand of tyres please?

    • @CycleFab
      @CycleFab  10 หลายเดือนก่อน

      Here's a link to Amazon for them....
      www.amazon.com/Forceum-75R15-6-Ply-Light-Radial/dp/B07M9C7Y7W/ref=sr_1_1_sspa?crid=2EIE7NHBMFEYF&keywords=235%252F75r15+mud+tires&qid=1707344524&sprefix=235%252F75%252Caps%252C1143&sr=8-1-spons&ufe=app_do%253Aamzn1.fos.18ed3cb5-28d5-4975-8bc7-93deae8f9840&sp_csd=d2lkZ2V0TmFtZT1zcF9hdGY&psc=1&smid=A35YNQIZ5G65XK&_encoding=UTF8&tag=1911048-20&linkCode=ur2&linkId=af8c5063fc2e7ddf2d0f37b6e862767b&camp=1789&creative=9325"

    • @CycleFab
      @CycleFab  10 หลายเดือนก่อน

      I'm very happy with them, here's a link for them,...
      www.amazon.com/Forceum-75R15-6-Ply-Light-Radial/dp/B07M9C7Y7W/ref=sr_1_1_sspa?crid=2EIE7NHBMFEYF&keywords=235%252F75r15+mud+tires&qid=1707344524&sprefix=235%252F75%252Caps%252C1143&sr=8-1-spons&ufe=app_do%253Aamzn1.fos.18ed3cb5-28d5-4975-8bc7-93deae8f9840&sp_csd=d2lkZ2V0TmFtZT1zcF9hdGY&psc=1&smid=A35YNQIZ5G65XK&_encoding=UTF8&tag=1911048-20&linkCode=ur2&linkId=af8c5063fc2e7ddf2d0f37b6e862767b&camp=1789&creative=9325

  • @scottf4277
    @scottf4277 ปีที่แล้ว +1

    Do your 235 75 R16 tires rub after the lift install? With or without the Spacers?

    • @CycleFab
      @CycleFab  ปีที่แล้ว

      The tire size that I run is 235/75 R15. And those do rub slightly without the lift kit. Thanks for watching and commenting.

    • @scottf4277
      @scottf4277 ปีที่แล้ว

      so they do not rub with the lift...are you using the spacers still

    • @CycleFab
      @CycleFab  ปีที่แล้ว

      The 235/75R15's do not rub with the lift. Whether or not they will rub with 16's I do not know. And yes, I still have the lift kit installed.

    • @CycleFab
      @CycleFab  ปีที่แล้ว

      @@scottf4277 Yes, I'm still using the 1" wheel spacers. It improves the stance and overall look of the vehicle.

    • @scottf4277
      @scottf4277 ปีที่แล้ว +1

      ​@Cycle Fab Thanks for the help. 235 70 r16. (29" tall) are about the same size as a 235 75 r15. (28.9) tall. Width is the same (9.3") My 06 came with 16" wheels. I did the same 1.5" lift. Thanks for the help on the tires. Just didn't know whether I would need the wheel spacers.

  • @ME4TLO4F
    @ME4TLO4F 5 หลายเดือนก่อน

    This is the fifth video that ive seen that skips over the complete disassembly of the rear, didnt mention the brake line housing needing to be taken off among other things…

  • @RozanneKinan-c1x
    @RozanneKinan-c1x 2 หลายเดือนก่อน

    Klocko Dale

  • @ConstanceArmand-y9g
    @ConstanceArmand-y9g 2 หลายเดือนก่อน

    Abernathy Coves

  • @gitodanoeprasetyo2371
    @gitodanoeprasetyo2371 10 หลายเดือนก่อน +1

    Too much speaking

    • @CycleFab
      @CycleFab  10 หลายเดือนก่อน

      Yep.