Good job with that. I picked up a couple tips. Polishing the armature made easy and the way you handled the headlight disassembly was a bit easier than what I was doing. I recently acquired a Classic 1-CR which I will be restoring and am curious as to where you purchase your parts such as the seals. I'm having a little difficulty. Thanks.
It's titled "Rev" and it began closer to the 12 minute mark. All my songs are available from the TH-cam library. I do need to get some new music though...
I used to love this color scheme but after seeing the Avalir (2015 to current), that color scheme just looks awful! Can anyone advise if on the Avalir 2 if the belt lifter on the power nozzle is plastic? it looks like it's made of black plastic but I can't say for sure cuz I've only seen pictures and I haven't actually seen in avalir 2 in person. Bill, where do you get the music from for all your tear down/ refurb/ polish videos? It's the most amazing music!
Can you make a quick video on where the height adjustment screw is to tighten the height adjustment so it doesn’t skip I’ve looked and looked and can’t find the screw it’s on a Kirby Sentria vacuum
Sorry, but I've never heard/seen any magic "height adjustment" screw that eliminates skipping. Maybe you mean some other type of adjustment? I've gone over all possible adjustments to G series Kirbys in previous videos.
@@evansimmons2001 I have an original micro matic height adjuster on one of my H2Ls. That screw is no longer on the G series machines. It was meant to limit the lowest position the nozzle can go.
VacLab weird a few repair shops said there is a screw on the newer ones to tighten that helps skipping but you take them apart a lot so I know you would know
Good job with that. I picked up a couple tips. Polishing the armature made easy and the way you handled the headlight disassembly was a bit easier than what I was doing. I recently acquired a Classic 1-CR which I will be restoring and am curious as to where you purchase your parts such as the seals. I'm having a little difficulty. Thanks.
I get all my parts from eBay.
What song are you using at 13:50
It's titled "Rev" and it began closer to the 12 minute mark. All my songs are available from the TH-cam library. I do need to get some new music though...
I used to love this color scheme but after seeing the Avalir (2015 to current), that color scheme just looks awful! Can anyone advise if on the Avalir 2 if the belt lifter on the power nozzle is plastic? it looks like it's made of black plastic but I can't say for sure cuz I've only seen pictures and I haven't actually seen in avalir 2 in person. Bill, where do you get the music from for all your tear down/ refurb/ polish videos? It's the most amazing music!
The tunes are from TH-cam's free library. And I prefer the Avalir 1 red/ black scheme over the Sentria II's look.
@@VacLab how do you access TH-cam's free tunes library?
@@VacLab So I found a channel called Audio Library - Tunes for Content creators. Is this the one? What are the names of the tracks?
@@Jordan-nj2ve Alternate, Bright_Future, Invisible, Jupiter, Nimbus, Rev, Sugar, and Sunspots.
@@VacLab You. Are. The. Best! Thank-You, Thank-You, Thank-You! :)
And the vacuum looks really amazing so good job on the cleaning, I wish I had a Sentria 2 I only have a G3 and a Sentria but would love a newer model
Kirby's for day's lol.
Can you make a quick video on where the height adjustment screw is to tighten the height adjustment so it doesn’t skip I’ve looked and looked and can’t find the screw it’s on a Kirby Sentria vacuum
Sorry, but I've never heard/seen any magic "height adjustment" screw that eliminates skipping. Maybe you mean some other type of adjustment? I've gone over all possible adjustments to G series Kirbys in previous videos.
VacLab on the Heritage II there is a screw to tighten the height adjustment but on the Sentria I can’t find it
@@evansimmons2001 I have an original micro matic height adjuster on one of my H2Ls. That screw is no longer on the G series machines. It was meant to limit the lowest position the nozzle can go.
VacLab weird a few repair shops said there is a screw on the newer ones to tighten that helps skipping but you take them apart a lot so I know you would know
VacLab do you know any ways to prevent the skipping
Oh that Sentria 2 looks really good and should hopefully stay that ways for a Couple years.
Not ¿
LITTLE BRUDDA that was there by accident but it’s gone now
Nice job as always :) 12 kibys ! I never liked the color scheme on this one my favorite colors are the heritage 2 black and gray ,G5 G6 ,and Avalier 2