This video was probably the most helpful an informative that my husband found, he's trying to fix our subwoofer and this tutorial really helped him out.
I really like these kinds of things. DIY, how to fix things, etc. You got yourself a new subs, keep up the good work. Im'ma binge watch the videos in this channel!
Hi @RedMan - How do we know that the IC is the problem? and what is the number of that IC? Also the input LFE - what should be the voltage shown of the input LFE, I need to be sure that the problem is not with the DVD player.
Hi, I have the same subwoofer as you with the same problem, LED on, if I turn up the volume I hear the output power but no music playback. Which electronic elements specifically should I replace? Thanks and congratulations for the tutorial.
I have same issues in subwoofer and I have done ic replacement but there is no sound. Measured IC voltage 30V, 15v, ans 3.1 also. The voltage should be not less than 15 ? Or it’s normal ? Pls advise me thanks🙏
I did exactly the same, removed the IC in the standing circuit Board, that IC is basically an operational amplifier for low frequencies. I also replaced the big power capacitors (this took me 2hrs to remove them) after I resoldered the new IC, I carefully made sure the IC and capacitors did not overheat Closed everything and Vola it started working. I have a very bad sight which made it very difficult THANKS PARE FOR YOUR HELP
Hello , can you write down the IC type so I can order a new one , How many capacitors did you replace & what is their capacitance ? , thanks in advance :)
Kung meron ka na home theater or AV amplifier system na 5.1 channel, ikakabit mo yan na mga satellite speaker. Yan na maliliit then yan na subwoofer sa sub woofer out ng AV 5.1 amplifier mo.
Hi, I have a Harman Kardon TS-11 sub and I have a problem that even though the LED is on blue, there is no sound? Any clue what the problem might be? I just saw your video and thought I'd ask :) greetings Piotr
@@redman7339 Hi. Maybe I'll write how it looked in my place ;) As long as it played, it sounded beautiful, but over time the sound disappeared and the diode was normally lit blue. For some time, it was enough to lightly touch the metal back panel and the sub played normally again. But that too stopped working over time. And yesterday I came across your video and I thought JBL and HK are one and the same maybe this is what you were fixing ;) Thank you very much for your answer ;)
@@redman7339 ok na po sir nakita ko na sa forum, meron silang inupload na service manual, andun na po lahat ng part numbers at value. mahirap po kasi dito sa ibang bansa mag kalikot ng sarili kasi bihira tindahan ng pyesa.
i like this video, straight, no cuts gimmicks, very direct and straight to the point
This video was probably the most helpful an informative that my husband found, he's trying to fix our subwoofer and this tutorial really helped him out.
We've been sitting tight for a video like. It helps me a great deal to fix our speaker and it is presently working with the assistance of your video.
We've been waiting for a video like. It helps my father a lot to fix our speaker and it is now working with the help of your video Sir. Thank you
indeed
Great to hear!
I was just looking for it and then I saw this! Perfect!
esxactly
you are a lifesaver. This really solved my sound problem of my speaker. Thanks a lot.
wow, ang galing so thats how it is done tagal ko ding hinanap to keep it up!
I really like these kinds of things they teach how to fix things.It is straight to the point and very direct.
I really like these kinds of things. DIY, how to fix things, etc. You got yourself a new subs, keep up the good work. Im'ma binge watch the videos in this channel!
Thanks for the sub!
A very interesting way on how fixing a sub woofer. This is a very detailed and well executed video. I really like it.
Thank you very much!
It is a another form of tutorial that help everyone to do in the future.Thanks for sharing.
salamat sa turorial pre, susubukan ko to sa subwoofer ko kasi No Sound na rin
Easy to understand step by step guide, keep it up man!
Appreciate it!
Great video on how to fix this kind of prob in jbl speaker. Thanks for sharing this.
Happy to help
This video put a big smile on my face 😁😁😁. I am going to follow this steps to fix my Subwoofer ,thanks bro.
Did it work?
Hi @RedMan - How do we know that the IC is the problem? and what is the number of that IC?
Also the input LFE - what should be the voltage shown of the input LFE, I need to be sure that the problem is not with the DVD player.
This tutorial definitely will help me to repair my sub woofer. Keep it up!
Glad to hear it!
Tignan ko lang kung pano mag-ayos nyan at yung samin ay sira, Thanks for sharing!
Thanks for sharing those infomation man.. keep it up👍
Will do!
Hi, I have the same subwoofer as you with the same problem, LED on, if I turn up the volume I hear the output power but no music playback. Which electronic elements specifically should I replace? Thanks and congratulations for the tutorial.
awesome way to fixed sound. it is the one I was looking for. thankyou for sharing it.
Enjoy!
Very informative video, nice job! Thank you.
It's informative vedio.. thanks for sharing..
It's my pleasure
this is very helpful, i will show this to my husband.
Glad it was helpful!
Wheir is your place
Awesome, this will help me in the future i got plenty of subwoofer
Great!
It'll definitely help, great job bro keep it up
Hope so!
Ang galing naman! Thanks for the idea. Nag subscribe na ako! Keep posting!
Excellent video. Very informational.
Glad it was helpful!
Excellent video, it really is very good information. Many thanks
So nice of you
Nice video, this tutorial is really helpful...thanks for sharing
Thanks for visiting
I find this video very useful
wow! that was perfect. you are a good mentor indeed! looking forward for next video...
More to come!
This is Great ! I Can now fix my sub woofer . thanks for sharing this video!
You are welcome!
I have same issues in subwoofer and I have done ic replacement but there is no sound. Measured IC voltage 30V, 15v, ans 3.1 also. The voltage should be not less than 15 ? Or it’s normal ? Pls advise me thanks🙏
Can we get the Audio out signal to other speakers from this JBL subwoofer..is ther any special method to connect wire.....?
Yes, you can take it from the pre-out of the amp circuit near the amp IC.
If you explain what's the problem & for which problem which ic ur removing if you explain means it will be more helpful to all ths viewers
Thanks for the info.
I did exactly the same, removed the IC in the standing circuit Board, that IC is basically an operational amplifier for low frequencies.
I also replaced the big power capacitors (this took me 2hrs to remove them)
after I resoldered the new IC, I carefully made sure the IC and capacitors did not overheat
Closed everything and Vola it started working.
I have a very bad sight which made it very difficult
THANKS PARE FOR YOUR HELP
Hello , can you write down the IC type so I can order a new one , How many capacitors did you replace & what is their capacitance ? , thanks in advance :)
thank you so much for sharing this tutorial
It's my pleasure
very informative thankyou on this video buddy
You bet
Thanks for sharing! I kinda get information that I can use. Keep on sharing!
Will do!
Awesome video. Thanks for sharing.
Thanks for the visit
it solved my problem tq very much bro !
Glad to hear that
I was looking for this, Thanks for sharing
No problem!
Very informative, thank you so much for making such a video.
So nice of you
@@redman7339 make a lot of these lods.
Wow that's so great! Thank you for this tutorial. It really helps!
You're very welcome!
nice, love this vid! This is very detailed
Appreciate it!
this is very helpful. thanks
Glad it was helpful!
thank you so much for this tutorial, it really helps me a lot
Glad it helped!
Cool video! Please do more! Hahahah
Good job! Keep it up!
Thanks!
Good work thanks for sharing
Thanks for watching
सेम ic मार्केट मे नाही हे, तो दुसरा कोई लगा सकते हे क्या
well explain , good job
Glad you liked it
Have you tried soldering the microcircuit with special needles?
It hurts to watch this ... :(
Nice video men keep it up.
Appreciate it
@@redman7339 may fb page ka?
Boss pano ba patunugin to kasama yung mga maliliit niyang speaker?
Kung meron ka na home theater or AV amplifier system na 5.1 channel, ikakabit mo yan na mga satellite speaker. Yan na maliliit then yan na subwoofer sa sub woofer out ng AV 5.1 amplifier mo.
Hi, I have a Harman Kardon TS-11 sub and I have a problem that even though the LED is on blue, there is no sound? Any clue what the problem might be? I just saw your video and thought I'd ask :)
greetings Piotr
What have you done so far? Do check the output of pre amplifier section first for output signal driving the main amp.
@@redman7339 Hi. Maybe I'll write how it looked in my place ;) As long as it played, it sounded beautiful, but over time the sound disappeared and the diode was normally lit blue. For some time, it was enough to lightly touch the metal back panel and the sub played normally again. But that too stopped working over time. And yesterday I came across your video and I thought JBL and HK are one and the same maybe this is what you were fixing ;) Thank you very much for your answer ;)
Ano po ba problema nito sir anondapat palitan po
Halo , fren I have a yamaha subwoofer but now have just low bass , can I know what is the problem ? Tq
Let me check
Pag boss pumuputok ang ganyan ano p kayang problema.
My jbl 140 subwoofer same problem sir plz help.
Sir ask ko lang bakit yong active sub jbl biglang walang power dati gumagaralgal now wala na power ano kaya problema sir
Check mo power supply section for output muna.
No lights din po ba yan?
With light indicator
@@redman7339 sira pala yung led na green hehe, kala ko sira padin kahit palitan ng pnp npn transistor. Ok na siya. 😁👍
sir, sira yung zener diode ko sa jbl ko naganyan din kaso wala ako makita na part number sa diode. baka alam nyo po.. salamat
Ano part number? Or sa pcb diode number.
@@redman7339 PCB diode number po
@@redman7339 ok na po sir nakita ko na sa forum, meron silang inupload na service manual, andun na po lahat ng part numbers at value. mahirap po kasi dito sa ibang bansa mag kalikot ng sarili kasi bihira tindahan ng pyesa.
Ok. Good. Hanap k lng replacement part.
Sir paano kaya at ano sira pag power on ko Yung green light nawawala then Hindi na nagana
Check mo yung power supply section nya. Test mo if meron output
Sir related sa question ko meron naman power kaso naka stanby lang mag green tapos balik sa stanby red color
Sir if mag paayos sayo saan po location nila
nice
Thanks
Fulll review vaaaneemmm
Boss yung aking sub na ganyan naka standby lang.tulong namn pls
I really like these kinds of things they teach how to fix things.It is straight to the point and very direct
Amazing video. Very informative
Glad you liked it
thank you so much for sharing this tutorial
You are so welcome!