2jz Modified Oil Pump Review

แชร์
ฝัง
  • เผยแพร่เมื่อ 14 มิ.ย. 2024
  • In this video we take a part Drift Motion modified 2JZ oil pump and compare it to a stock Toyota pump. We also dive into the different options they offer on their website and how this may benefit you.
    I am not sponsored by Drift Motion and I did not get a discount on this pump. I simply wanted to document the upgrades and share it with anyone that may be considering the purchase and wondering on what it actually consists of.
    Follow me on Instagram!
    / jdmbooger
    Follow me on Facebook!
    / jdmbooger
    #jdmbooger #driftmotion #2jz
  • ยานยนต์และพาหนะ

ความคิดเห็น • 22

  • @jrich436
    @jrich436 10 หลายเดือนก่อน +4

    When you increase the RPM of any pump without increasing the size of the ports and tubes you are running it through you increase pressure and then run the chance of cavitation where there is a drop in pressure because the liquid is being pushed off the impeller and not being moved through the ports correctly
    This is why so many "frankenstein" Hondas were blowing head gaskets in the 00s. VTEC water pumps are gear reduced for higher RPM where as non VTEC are not. They were spinning the pump to fast which increased pressure until it cavitates and then drops pressure. Same thing happens in oil pumps
    As flow increases, pressure decreases and vice versa. This is Boyle's Law of physics

  • @chadstueber9401
    @chadstueber9401 ปีที่แล้ว +1

    Awesome video! Rebuilding my 1j bottom end after some starvation to cylinder 1 and definitely gonna get their oil pump now because I love the rev limiter a little too much hahaThanks! Hope to see you out in Abq again soon for NoCoast!

    • @LukePakula
      @LukePakula  ปีที่แล้ว +1

      Haha good stuff, look into getting an oil pan baffle as well. It's a must if you have a front sump. I made a video on that as well!

  • @andyitslit
    @andyitslit 3 ปีที่แล้ว +3

    Pretty useful video. I was curious about the modified pump.

    • @LukePakula
      @LukePakula  3 ปีที่แล้ว

      I'm glad it cleared some things up for you!

    • @andyitslit
      @andyitslit ปีที่แล้ว +1

      @@LukePakula ended up doing it and now my oil pressure is too high actually. Maybe because my block has no oil squirters.

    • @LukePakula
      @LukePakula  ปีที่แล้ว

      @@andyitslit oh nooo I think driftmotion does mention that on their site. I would suggest maybe removing the shim they installed off of the relief valve to bring the pressure back down. But I would contact them first and see if that's doable.

  • @hs4165
    @hs4165 2 ปีที่แล้ว +1

    good video! what fitting did you use from the oil pump? what thread pitch is it to AN10?

  • @suprarune
    @suprarune ปีที่แล้ว

    Ive never heard anyone having problems with the oem oil pump or anyone have going the race or rebuilt version..not even real street is mentioning this in theire oil pump replace video..And doing those small changes is what you could do yourself and saving some money!..But good video review about the difference!..like the other videos you do too!

  • @BjornFSE
    @BjornFSE 2 ปีที่แล้ว +1

    good video

  • @alloutgarage293
    @alloutgarage293 ปีที่แล้ว

    What is the spec for the fitting in the oil pump to 10 an

  • @darkdayznow
    @darkdayznow 2 ปีที่แล้ว

    I believe I experience this where the oil pressure was too high! And now I’ve lost oils pressure. Any returning back from this by replacing the oil pump?

    • @denta190t
      @denta190t ปีที่แล้ว

      How high was your oilpressure?

  • @jonathandecarufel2862
    @jonathandecarufel2862 2 ปีที่แล้ว +1

    I need to replace my OEM oil pump, can it be a good purchase for a daily drive? I dont think Im gonna drift with the car

    • @LukePakula
      @LukePakula  2 ปีที่แล้ว

      New oem pumps are great for street use and for the track. You really only need to upgrade when you start reving higher and keeping the rpms up there for longer times.

  • @pourtierbeatz7804
    @pourtierbeatz7804 3 ปีที่แล้ว +1

    Should i get a modified one if im only running 500-600whp on my 1jz vvti? I been told not to but not sure why not if the motor will run better and longer?

    • @LukePakula
      @LukePakula  3 ปีที่แล้ว

      Modified pump means more flow and more consistent oil pressure. I don't see a reason why you shouldn't upgrade it.

    • @pourtierbeatz7804
      @pourtierbeatz7804 3 ปีที่แล้ว +1

      @@LukePakula appreciate the quick reply and thats what i was thinking too but my friend was saying supposedly its bad because too much oil pressure and it will kill my bearings

    • @LukePakula
      @LukePakula  3 ปีที่แล้ว

      @@pourtierbeatz7804 I would call them and verify if it's recommended for your build. It also matters how high you plan on reving the engine as well.

    • @pourtierbeatz7804
      @pourtierbeatz7804 3 ปีที่แล้ว +1

      @@LukePakula from what i read stock rev limit is 7k and i only have single bc steel springs and retainers so im thinking 8k safe and a lil more power band

    • @LukePakula
      @LukePakula  3 ปีที่แล้ว

      @@pourtierbeatz7804 I know people use stop pumps up to 8k rpm but with drifting and how quickly it revs and bounces off rev limiter, I feel safer with higher flowing pump.