👇Sponsor & Any Good Stuff👇 👇影片裡的好東西在下方連結👇 Go check out 4UAD new arrival & lubricant pen 【4UAD 相關商品在下方連結↓↓↓】 🛒🛒 store.4uadsmartairsoft.com/ 🛒🛒 Special Thanks: ➤ VFC Airosft: They got a whole lot of trademarked guns 🛒Goods : www.vegaforce.com/site/index?lang=zh ➤ACETECH: you guys do make some amazing tracers and chrono 🛒Goods : www.acetk.com/ 🛒 Amazon Goods : amzn.to/3sr5I2n ➤PUFF DINO (恐龍瓦斯): Thanks for supporting us the gas, Puff Dino is the way to Go!!! 🛒Goods : www.puffdino.com/en/category/Airsoft-Gas/E01.html
Accidentally stumbled upon one of your videos, and I just binged most of your videos after that. You guys are insane! The amount of effort that goes not only into the content and how you visualize data and test, but the editing aswell. Just wanted to let you know, you guys are awesome, hope you get a bunch of attention asap!
@@4UADSmartAirsoft Just finished mine, G&P XM177 E2 Base gun. Retro Arms split gearbox, 22 tpa motor, 12:1 gears, Gate Titan full software, Big brick 100c lipo battery in M4 stock mag pouch,Maxx hop up, Maple leaf barrel an super macaron 60 degree bucking. Run it on precock setting. Runs like a dream, a real sleeper build.
There was a lot of problem with the delta ring when removing the handguard, this piece of steel gives you a hard time in this part of the disassembly, try to use specific wrench next time to push this piece 🤣🤣🤣
For this one I will put it into my new series, called my honest words. It’s basically me doing the open box and shooting it, and get my first feedback, then I will show what I would do to this gun. Let’s see how this turns out.
So far it performs pretty well and not a problem came out just yet, the only thing I swapped out was the recoil rod (it’s too heavy) and also just incase the buffer tube came off you can roll with a we or Ghk version!
This reminds me of that mission in black ops 1 where your helicopter crashes in the middle of a jungle for some reason edit: watching that good thing 40mm grenade launchers have a 15 meters minimum arming distance
👇Sponsor & Any Good Stuff👇
👇影片裡的好東西在下方連結👇
Go check out 4UAD new arrival & lubricant pen
【4UAD 相關商品在下方連結↓↓↓】
🛒🛒 store.4uadsmartairsoft.com/ 🛒🛒
Special Thanks:
➤ VFC Airosft: They got a whole lot of trademarked guns
🛒Goods : www.vegaforce.com/site/index?lang=zh
➤ACETECH: you guys do make some amazing tracers and chrono
🛒Goods : www.acetk.com/
🛒 Amazon Goods : amzn.to/3sr5I2n
➤PUFF DINO (恐龍瓦斯): Thanks for supporting us the gas, Puff Dino is the way to Go!!!
🛒Goods : www.puffdino.com/en/category/Airsoft-Gas/E01.html
Accidentally stumbled upon one of your videos, and I just binged most of your videos after that.
You guys are insane! The amount of effort that goes not only into the content and how you visualize data and test,
but the editing aswell. Just wanted to let you know, you guys are awesome,
hope you get a bunch of attention asap!
Yo man really really appreciate the support! And glad you liked our videos! We will keep popping videos! Stay tuned for more!
ハンドガード取り外すのがほんとに硬いんですよね。
良いasmr動画をありがとうございます。
睡眠用に使わせてもらいます。
Retro m4s are the best, I have a colt 629 and 727. Love them both.
I want to do a blood diamond XM177 build, it is hot as fuck!
@@4UADSmartAirsoft retro m4s are really addictive… Its really tempting to convert my 727 into a Blood Diamond build.
@@4UADSmartAirsoft Just finished mine, G&P XM177 E2 Base gun. Retro Arms split gearbox, 22 tpa motor, 12:1 gears, Gate Titan full software, Big brick 100c lipo battery in M4 stock mag pouch,Maxx hop up, Maple leaf barrel an super macaron 60 degree bucking. Run it on precock setting. Runs like a dream, a real sleeper build.
When 4uad uploads, i watch
Dude you are the man
That recoil looks snappy!
Dude it’s pretty damn good~ maybe time to give Vfc AR a shot
Ok… never seen this guy before… at the whistle, I subscribed
Thank you for the support!
Neat! That unboxing is swish man!
haha thanks buddy glad you like it!
拆護木那段太真實了😂
Which combat shirt are you wearing at the end? Love your videos!
拆護木那一段我笑了😂😂
那個時候我想跟不懶燈說：你是在hello？？？
For delta ring i use screwdriver :D Nice video
謝謝你的分享與介紹😂❤
妥當當～～
Nada mejor que un arma antigua. Great video!
Will try more old guns thanks man!
There was a lot of problem with the delta ring when removing the handguard, this piece of steel gives you a hard time in this part of the disassembly, try to use specific wrench next time to push this piece 🤣🤣🤣
Hahaha will do man
拔護木那段快笑翻了!
那段我很崩潰xDDD
Will there be a test of it?
if then it would be fun to hear your opinion compared to your TM and GHK, on several parameters.
For this one I will put it into my new series, called my honest words. It’s basically me doing the open box and shooting it, and get my first feedback, then I will show what I would do to this gun. Let’s see how this turns out.
Freaking awesume!
Thanks yo
刀功不錯
是不是
I have a nother question what type of Joule's or fps dous this replica give and is it npas compatible? Also your m733 video is great 👍
haha thanks man! for the FPS adjuster the joule output could go up to 3+ depending on what kind of bb you use. personally I just keep it stock
@@4UADSmartAirsoft thank you
Badass 🔥
It is one bad ass gun for sure!
this is sexy, ive been wanting a retro M4 to build a black hawk down delta force kit
I need a blood diamond version
Hi! Awesome video as always , I was interested in getting the vfc xm177 v3 how is it so far ? And concerns with or problems with the platform ?
So far it performs pretty well and not a problem came out just yet, the only thing I swapped out was the recoil rod (it’s too heavy) and also just incase the buffer tube came off you can roll with a we or Ghk version!
Thank you!
他附赠的那个长护木应该是要把三角喵拆下来的？
裝M16的
VFC。。。。羡慕了
越來越進步，真的做的不錯
It’s perfect
Thanks man
拆戶目 有工具啊
我們窮阿~~
What kind of hop up unit can i put inside?
Maple leaf is good for this one
@@4UADSmartAirsoft This for GHK/VFC? With ML wonder bucking?
Could this be the first time you read the manual on camera?! hahaha
😅😅
How stressful was that handguard!
Lolol yep I seriously had no idea how that luncher works hahah
Very very stressful
抱歉 來晚辣
沒關係～ 有來都很開心～～
這把槍我有兩支, 它的L型覘孔和風偏旋鈕都轉不動, 做得有點失敗 !
那兩根小小的pin有壓嗎?要押才能轉喔
VFC BCM MCMR GBBR when?
Working on it
我看到你的漫威公仔
全聯負責醜聯盟
looks cool but that trigerunit is a terrible design in my opinion. the ods of acidentally triggering if bumbping in to somthing seams quite high.
That is actually the worst design, I don’t like it too. Might be the reasons why it’s labeled as X instead of M
XM177はどこで買いましたか？
I got it from Vfc
How much bro?
Much
This reminds me of that mission in black ops 1 where your helicopter crashes in the middle of a jungle for some reason
edit: watching that good thing 40mm grenade launchers have a 15 meters minimum arming distance
For airsoft this one had a range of 5 meters lol
大陆的太羡慕了
想玩玩不到
不知道为什么大陆禁玩具
其實我也不明白為何要禁，這東西比球棒還安全….也許是方便管控便宜行事
Dear Santa…
Lolol
This viedo does not have a cat in it, does it?
They were not in the mood hahaha
@@4UADSmartAirsoft ah, understandable. They are cats after all
if this allowed in malaysia.i will have a lot of this stuff.
Hummmmm I heard there are some airsoft going on there
i dont like the fact that the lower part of the barrel is completely exposed after adding the noobtube :/
Might be the reason why it’s labeled as X instead of M
@@4UADSmartAirsoft "X-Rating" cuz of nudity? :3
@@123456kiste lolololol nah it’s for testing project
没想到，组装完以后是这种无法欣赏的造型。
也難怪名字的開頭是X而不是M…. 那個榴彈發射器有夠難用
"榴"彈
牛彈!
A lot of work for few bbs to come out. Time to legalize real firearm.
Haha will see what happens
中国包邮不
Fedex應該有機會
nah,
1st = Japan, Marui,
if Taiwan, then GHK or Viper Tech
i'll never get a GBBR from the (V)ery (F)ragile (C)onstruction
Lolol