Yeah what he said lol I have 2 10s 2 tweets and 1 driver also how to do know what connectors are for the mids and what connectors are for the tweets/driver
I want to know the same thing lol. A friend of mines told me to run a separate 1ohm amp for the driver itself. Even tho the driver is 8ohm the amp wont reject it being a 1ohm amp.
What kind of wood is recommended to make these boxes? And insulating them for clean sound? I am sometimes in Queens, NY and some systems I hear now can play for an entire neighborhood to a point the neighbors have to argue with the people for loud music lol
hola patron i have a major question that i’ve been looking for someone to answer me , you think you can make a video explaining in what Amplifier to purchase for what set up , so example i will be having a single chucho just like yours without a driver just yet but i already have a 800x4 amp i just don’t know what amo to get if i’ll be running a chucho like you or most maybe 2
You deserve a sub cuz God dammit I been trying to figure this out I had to take apart one I bought to figure it out bit this explains it so much better with 3 tweeters n shit .
Dude, can you make the video on how to connect the drivers, I’m guessing u can use a 8 pin connection, run it as it’s own channel and connect it to the amp. Then you’ll only have 3 channels to the amp. Would be nice if you can show it.
What’s up bro I got a question , how do I take the base out of my chucheros I have 4 10s and 4 tweeters. Do u know how to prevent base from the chuchero ?
Does it matter what speakon cable you get for the chuchero like the one with 2wires on the inside, or 4wires like the one in your vid? (Not sure if I’m asking this Q: right)
I noticed that some Chuchero boxes have terminals on the side with a speakon connection on the other. Could I also just wire them up normally like a sub box would? I figured a box like that just gives you two different options
Hey man nice vid, I was wondering if this same method would work if I had 2 4ohm mid range 12 inch and 2 tweeters and a 8ohm horn…. I’ve been at it for about two weeks dude any information you can give would be greatly appreciated
yeah so its the same thing but since they are 4ohm mids they will wire down to 2 ohms instead of 4ohms so make sure your amp is compatible for 2 ohms as for the tweeters and the horn just link them like I showed in the video at 2.66 ohms
Can I connect 1 10"sub speaker and a 10"chuchero box in the same amp? I want to upgrade the audio in my 2010 prius and save my trunk space. I want to mount the amps where the spare tire goes.
So I got a chuchero 2 10s and 2 tweeters and then a driver box with 3 drivers and 2 tweeters I got the 2 10s connected separately but how would I connect the driver box with 3 drivers and 2 tweeters and the other 2 tweeters from the chuchero to a taramp 800x4 with speakercon cables
I have chuchero 10 inch 2 tweeters and horn but my horn driver has problem going on and off and the tweeters too when the rca moves a bit I have lowered car so when I hit bump it goes on n off, all 3 don't work at same time either the horn works n not tweeters or vise verse
I have a 8 inch chuchero with 2 tweeters and want to wire it with all 4 doors of my car and I have 2 tweeters as well in my car, which amp should I get ? And what size bass and amp ?
Hey man I got a question, could I run 2 chucheros off of 1, 4 channel amp ? It’s two 4 ohm 10s and two 4 ohm tweeters, in each box so could I use a 4 channel amp to run 2 chucheros ?
you can do that where you connect the tweeters and the driver together but if you have an 8 conductor speaker you can run it as its own channel I will make a video for you
Not a chuchero fan. 2 lines would make it sound a lil weir one side example left side of amp plays mids then right side on amp plays tweeters. I would rather get the 8 pin connector for real sound left & right. A powerfull 4 channel would do it .
![NL2 vs NL4 vs NL8 [Neutrik SpeakON Speaker Cable Connectors]](http://i.ytimg.com/vi/oPtJetBt1DI/mqdefault.jpg)
![NL2 vs NL4 vs NL8 [Neutrik SpeakON Speaker Cable Connectors]](/img/tr.png)
Na bro you threw it out of the field with this one, this video helped me understand more about my chuchero wiring and more, I appreciate you bro
Dude, this video is very good, barely seen people explain it in paper. Thanks for this
Fam good looking out. I was clueless before and now 100% understand it. 🙏
Boss I like all ur vids that helping a lot of ppls can u make a vid doing that but with a 2 tweeter and 1. Driver thanks man
Yeah what he said lol I have 2 10s 2 tweets and 1 driver also how to do know what connectors are for the mids and what connectors are for the tweets/driver
I want to know the same thing lol. A friend of mines told me to run a separate 1ohm amp for the driver itself. Even tho the driver is 8ohm the amp wont reject it being a 1ohm amp.
The same aspect applies to this kind of setup just apply the concept of the video for you setup.
Thanks this helped me from buying a 4 ohm version because I want be able to bridge the rear channel at 4 ohms
Great video. But can you wire a chuchero with two tweeters and one driver the same as you did in the video ?
hey man, great video. can you do a video explaining how to wire a chuchero with 2 midbass, 2 tweeters, and 1 driver?
Not all heroes wear capes.. some have kick ass tutorials on TH-cam 🙌🏿👏🏿💪🏿
BEST video explaining it.. thanks bro!!!!
Great video bro, now I fully understand keep up the good work
Great video. Do you have a video explaining how to connect the box to trams amp 1 channel?
TYSM I can save some money now that I can put it together thanks to you ^_^
Keep up the vids man super informative 👍
I also have a box with 2 mids 2 tweets n a driver I think I wanna do a set up like you got with 2 mids 3 tweets n a separate driver box. Good shit man
Thanks for making this bro. Made shit so much clear. Can you do more videos like this.
You keep it 💯 man. This is really good for those learning the process!
Thanks bro, you managed to teach me how to set up a whole chuchero from start to finish🫡
Great explanation, I understand it more. Could you make a video on a 8 pole connector?
What kind of wood is recommended to make these boxes? And insulating them for clean sound?
I am sometimes in Queens, NY and some systems I hear now can play for an entire neighborhood to a point the neighbors have to argue with the people for loud music lol
Keep making your vids bro!!!! Your channel will get bigger soon!!!!! 🙌🏾🙌🏾🙌🏾🙌🏾🙌🏾🙌🏾🙌🏾
hola patron i have a major question that i’ve been looking for someone to answer me , you think you can make a video explaining in what Amplifier to purchase for what set up , so example i will be having a single chucho just like yours without a driver just yet but i already have a 800x4 amp i just don’t know what amo to get if i’ll be running a chucho like you or most maybe 2
I’ve got the same question, I’m stuck between the Taramps DS800x4 or the one he has in the video
@don hector get the 800x4 if you’ll end up upgrading to more than 1 driver so that it can run your horns/tweeters
@@blackink4296 I’m only doing two 6.5 DS18 Mids 250W rms and two super bullet tweeters
your a beast bro thanks
Ur a saint bro🙏🏽🙏🏽
You deserve a sub cuz God dammit I been trying to figure this out I had to take apart one I bought to figure it out bit this explains it so much better with 3 tweeters n shit .
Another salvadoreño!
I want to say thank you I got a question they sold me a 2 channel amp you're supposed to use a 4-channel amp right
Dude, can you make the video on how to connect the drivers, I’m guessing u can use a 8 pin connection, run it as it’s own channel and connect it to the amp. Then you’ll only have 3 channels to the amp. Would be nice if you can show it.
Best fking video did it first try watching this video
would you consider making a custom chuchero box for an escalade? $$$
What’s up bro I got a question , how do I take the base out of my chucheros I have 4 10s and 4 tweeters. Do u know how to prevent base from the chuchero ?
How would I look up the wire harness for the speakon connector
Does it matter what speakon cable you get for the chuchero like the one with 2wires on the inside, or 4wires like the one in your vid? (Not sure if I’m asking this Q: right)
I noticed that some Chuchero boxes have terminals on the side with a speakon connection on the other. Could I also just wire them up normally like a sub box would? I figured a box like that just gives you two different options
Hey can you do another video on the driver box please
I have a question by bridging the tweeters like this and one blows out would it blow all 3 tweeters by bridging it like that?.
Hey man nice vid, I was wondering if this same method would work if I had 2 4ohm mid range 12 inch and 2 tweeters and a 8ohm horn…. I’ve been at it for about two weeks dude any information you can give would be greatly appreciated
yeah so its the same thing but since they are 4ohm mids they will wire down to 2 ohms instead of 4ohms so make sure your amp is compatible for 2 ohms as for the tweeters and the horn just link them like I showed in the video at 2.66 ohms
@@carlosquijano9839 I have 2 lanzar 2000 watt 4ohm cross over compatible 🤦♂️
@@frank2toes795lanzar amps are trash tbh. Get yourself a brazilian amp like stetsom, taramps, banda, or sound digital.
Can I connect 1 10"sub speaker and a 10"chuchero box in the same amp? I want to upgrade the audio in my 2010 prius and save my trunk space. I want to mount the amps where the spare tire goes.
So I got a chuchero 2 10s and 2 tweeters and then a driver box with 3 drivers and 2 tweeters I got the 2 10s connected separately but how would I connect the driver box with 3 drivers and 2 tweeters and the other 2 tweeters from the chuchero to a taramp 800x4 with speakercon cables
Can you wire tweeters and mids to the same amp
La conexión de + a otro + se puede solo usar wire nut or se debe soldar ?
Am I able to wire 2 8ohm tweeters to a 4ohm final reading?
What amp should I get if I have 1200w mids and 700w tweeters? Do I overpower the tweeters or underpower the mids?
What’s up brother can you get into the whole filter with the tweeters
I have chuchero 10 inch 2 tweeters and horn but my horn driver has problem going on and off and the tweeters too when the rca moves a bit I have lowered car so when I hit bump it goes on n off, all 3 don't work at same time either the horn works n not tweeters or vise verse
Can you show a video of how to make a Remote cable
I have a 8 inch chuchero with 2 tweeters and want to wire it with all 4 doors of my car and I have 2 tweeters as well in my car, which amp should I get ? And what size bass and amp ?
Sorry for recording in vertical guys I completely forgot
I have tried to wire it in the chuchero box but can’t figure out how to get them all to work properly.
@@frank2toes795 u got it working?
Is it the same way as you connect parallel if you were to have to miss 2 tweeters and 1 driver
What amp should I run with a 2 10 in chuch with 2 tweeters and 1 horn. Preferably taramp
i got a question how u connect the chuchero to ur radio in the front of the car
👏👏👏
Can you explain how many batteries are need for example your setup??!?!
How do i lnow how to connect ot if i just buy the chuchero already made?
What is the ohm load at the amp when u done?
Hey man I got a question, could I run 2 chucheros off of 1, 4 channel amp ? It’s two 4 ohm 10s and two 4 ohm tweeters, in each box so could I use a 4 channel amp to run 2 chucheros ?
Can you?
What's the measurements on your 12" chuchero I wanna build 1... length height width...thanks in advance 🙏🏿
So what about if u have 2 12s . 2tweeters and a driver....is there like a 3pole connector or the driver is connected to the tweeter inside the box?
you can do that where you connect the tweeters and the driver together but if you have an 8 conductor speaker you can run it as its own channel I will make a video for you
@@carlosquijano9839can u do the video pls
Thanks
Where can I buy boxes for cheap ?
What’s the best Chuchero Amp 8000watt 4ch?
I have 2 DS18 12’s 900watt 4 ohms each and 1 DS18 2" Compression Driver With Aluminum Horn 8 Ohm 450W and 2 DS18 2 DS18 PRO-TW320 Aluminum Bullet Tweeter 1.5" VC 1000W 4 Ohm
Bro, you got a IG so I can hit you directly for questions I got??
where can i find this
I always thought you can run drivers and highs parrelel doesn't matter about the frequency
How do I know which cable belongs to the tweeters and which cables belong to the mid
What if the tweeters are 4 ohms each
🙏
Can you do the 8 pin
its the same bro just make sure you know what wire is which it should say it on the end of the wire
@@carlosquijano9839 when i put it on the amp Is 4 negative 4 positive
Great video, now how do I do I wire the amp side to the radio? Do I tap off an existing speaker?
Not a chuchero fan. 2 lines would make it sound a lil weir one side example left side of amp plays mids then right side on amp plays tweeters. I would rather get the 8 pin connector for real sound left & right. A powerfull 4 channel would do it .
Can you tell me the correct wiring again I'm sorry I just got to pay attention more could you bridge the wires
yo bro make more videos, channel would be fire ! It don’t even got to be explaining just showcase your music and shit
I have two tens and and to tweeters
Bro, you took forever to explain something a lot simpler than what you make it seem
I have a different color cables