MERCEDES VITO REAR BRAKE DISCS AND PADS WITH HAND BRAKE SHOES REMOVAL

แชร์
ฝัง
  • เผยแพร่เมื่อ 24 ธ.ค. 2024

ความคิดเห็น • 23

  • @spockmcoyissmart961
    @spockmcoyissmart961 3 ปีที่แล้ว +1

    You Sir, are a better man than me. I would have taken 100 pictures with my phone from every angle. Every spring, pad, adjuster, everything! :)

  • @micheljoseph732
    @micheljoseph732 ปีที่แล้ว +2

    excellente démonstration, merci à vous pour cette vidéo !

  • @charlottegillbanks6168
    @charlottegillbanks6168 ปีที่แล้ว +1

    Hello there, I need to replace the brake cover screws, do you know where I could get some replacements? Many thanks

  • @enginebreaking6517
    @enginebreaking6517 4 ปีที่แล้ว +2

    Did this on mine a while ago. Now my handbrake doesn't work at all! The slits on my backing plates were so badly corroded that I suspect the spring pins have pulled through. Going to get it all apart again today now I have new backing plates.
    Just out of interest, when you put it back together, could you move the wheels by hand with the shoes adjusted and the handbrake off? That's the only part I'm unsure about.

  • @andyg817
    @andyg817 3 ปีที่แล้ว

    Mark how about fitting them?? anyway the bottom spring on the shoes is a bit hard to get on.. i used decent string to pull it on the shoes.. also road test to bed them in then re adjust to get a good effort...

  • @trevorwatson5754
    @trevorwatson5754 ปีที่แล้ว +1

    Great vision and great commentary. Thanks for this!

  • @AliuadebolaAkintegbe-lw9xu
    @AliuadebolaAkintegbe-lw9xu ปีที่แล้ว +2

    Is this vito automatic parking brake system or Manual

  • @patdownes4445
    @patdownes4445 8 หลายเดือนก่อน +1

    Make the job much easier. Just open the big nut on the hub and take off the hub.Then it's simple to do the brake shoes.

  • @AlexandruCandet
    @AlexandruCandet 2 ปีที่แล้ว

    Very good video, you explain absolutely everything thanks mate!

  • @frednetherlands887
    @frednetherlands887 3 ปีที่แล้ว +1

    Thank you.

  • @jackholt8964
    @jackholt8964 2 ปีที่แล้ว +1

    Not recommended to do that without a axle stand, or at least put the wheel under the axle

  • @turbiz
    @turbiz 4 ปีที่แล้ว +1

    Thx :)

  • @chrisneedham5803
    @chrisneedham5803 5 ปีที่แล้ว +4

    Saved a few quid by doing it yourself. Don't see the home front bringing bacon butties and coffee out

    • @MrMeltedwellies
      @MrMeltedwellies  5 ปีที่แล้ว +1

      Hi Chris good point thanks for watching

  • @SerajEmad
    @SerajEmad 5 ปีที่แล้ว +1

    I know it's your rotor but please don't hammer it like that, next time hammer in the middle...

  • @jaynedownes-sq9vw
    @jaynedownes-sq9vw 2 หลายเดือนก่อน +1

    Poop