2018 Chrysler Pacifica Tapping Clicking Noise HVAC Actuator Fix Replacement
ฝัง
- เผยแพร่เมื่อ 11 มี.ค. 2023
- If you have tapping or clicking noise under the dashboard, this video will help you replace the defective air inlet / door actuator part. This should be similar to the 2017-2023 Chrysler Pacifica. Hope it helps.
Actuator Part # 68164960AA
amzn.to/3OzMDoF
🔥Amazon Hot Movers & Shakers
amzn.to/44yhg3u
Please checkout my other videos by subscribe to my channel.
My 150Scooter channel:
/ 150scooter
Follow me
Instagram: / real150scooter
Facebook: profile.php?...
Twitter: / real150scooter
Disclaimer:
Links from Amazon are affiliate links. When you purchase through these links, we may earn a small commission at zero cost to you. This will helps support my channel.
#150Scooter #car #chrysler #car #actuators #pacifica
Hi, greetings from the Netherlands - Europe. I imported my 2018 Pacifica Hybrid Limited and listened for a year to the clicking sound. After your video I ordered the parts and did the installation today. All went well, no more printing/clicking sound. Many thanks man!
will this failed actuator kill a battery
Dadgum this job kicked my butt!! But all because I lacked visibility when installing the new actuator. Turns out there’s a guide post that fits into one of the mounting holes. I wasn’t getting it aligned before inserting the actuator into the blend door. I finally removed the knee airbag (easy 4 bolts) when got a better view up into the dash. I could see the guidepost and was able to get everything aligned. Definitely recommend a tiny ratchet for the actuator’s two mounting screws. Small hands and a flexible back also helps!
Great video! All of the other material I've seen say you need to run a calibration so the system knows which way is open vs. closed. Did you do a calibration?
Just replaced mine; my fat fingers had a miserable time with the screws. Finally decided it will work with just 1 screw and the locating peg. Time will tell if it lasts without the 2nd screw. But I opened the "bad" one, hoping to find the cause of failure. Motor runs fine in both directions, and the gear train runs smoothly. The only remaining item seems to be the limit switch, which I would think would be the problem. But it too seems fine. Would someone with better troubleshooting skills than I have an insight as to what is failing on these?
Just changed my actuator. Thank you so much for your directions!!!
How do I access the one in the driver's side? Could someone point me to a video?
I liked the video. I managed to replace the piece with a new Mopar part. It was definitely the part because it was clicking in my hand with the car off the first couple minutes I was trying to remove it. But it still happens with the new part any ideas?
Do we need to unplug the battery first?
Awesome video. Answered my question!!
I just completed this repair and it wasn't as bad as I thought it was going to be. It took me a couple hours and I didn't even bloody up my hands! Here are a few tips...
I received my Dorman brand actuator, will replace mine as soon as I can. An Amazon round, very low profile palm ratchet can really help in such a tight space. Very good video, thanks for showing us!
Thank you for posting this video.
-Excellent video. Explained it well. Thank You
땡큐 thank you!
Thanks!
Great Video :
How is the electrical connection released? Do you squeeze it in or pry the side with the slot out? I can see the groove on the replacement piece, so know which side. I see you left the electrical connection connected and then disconnected it, so maybe there's enough slack to see it after the 2 screws are out?
Greetings from Bulgaria!
I have a 2021 Pacifica hybrid would this be the same fix for the 2021 and if it's intermittent how do you tell which one it is