hi Clara, i have my new machine set up from China, I am very new about laser cnc with cypcut, my problem is on the remote if i pressed Z down, the alarm stated: Jog close to plate even though there was no steel plate on the table.
Hello Clara i am having this Alarm when i want to start cutting : Lua [string "GP ={..."]:1723:attempt to index local "o" (a vanil value) Any idea what can i do about it ? Thanks
Hi Clara, great videos in channel, been helping me a lot. We bought a laser cutting machine from a third part, so we aren't in guarantee period. I get a Tip Touch warning on BCS100 screen. Could you give a hint in what could that be? Also, there are 3 cable coming from the laser cutting head (OSPRI LC20S), one is the motor cable, other is the encoder cable, and the third is the signal cable. My doubt is in the signal cable, it has 4 cable in it, 0V, 24V, inferior limit and superior limit. Where do I connect those? The I/O Board is a BCL3766. I trying to contact OSPRI for a manual, but they do not answer. My laser machine is a Raycus RFL-1000, and I use Cypcut. Servo motors are Yaskawa. Appreciated. Best Regards.
Hi clara Can you help me how i can callibrate my laser cutting machine X and Y axis Like when i move my machine 1000 mm it actually moves 1010 mm How i can calculate the exact values
Hallo Clara I am from india ,I am senfeng laser service engineer I have very difficult problem in my life about y1 Axis motor run but y2 Axis moter is not run in automatic , when trying from drive the moter was run manuly, and also x Axis run only left side , when I am press right side arrow the Axis is going to left side . Plese help me. Thank you.
hi Clara, i have my new machine set up from China, I am very new about laser cnc with cypcut, my problem is on the remote if i pressed Z down, the alarm stated: Jog close to plate even though there was no steel plate on the table.
Since it is a new machine, did you ask your supplier for training?
Hello Clara, could you explain servo alarm, exceed negative stroke of z axis?
I will try to make a video.
@@ClaraChai Hey Clara, did you have a chance to make that video? Got the same issue here. Thanks.
Hello, smaw issue here. Can you make a video? Thanks
Need a video for how to perform origin z return on machine and should their be a plate under the head before performing?
how about optical interlock is active?
Hello Clara i am having this Alarm when i want to start cutting : Lua [string "GP ={..."]:1723:attempt to index local "o" (a vanil value)
Any idea what can i do about it ?
Thanks
Is "pallet A" higher or lower ?
Hi Clara, great videos in channel, been helping me a lot.
We bought a laser cutting machine from a third part, so we aren't in guarantee period. I get a Tip Touch warning on BCS100 screen. Could you give a hint in what could that be?
Also, there are 3 cable coming from the laser cutting head (OSPRI LC20S), one is the motor cable, other is the encoder cable, and the third is the signal cable. My doubt is in the signal cable, it has 4 cable in it, 0V, 24V, inferior limit and superior limit. Where do I connect those? The I/O Board is a BCL3766. I trying to contact OSPRI for a manual, but they do not answer. My laser machine is a Raycus RFL-1000, and I use Cypcut. Servo motors are Yaskawa.
Appreciated. Best Regards.
+86-13335151833
hello Clara. Can you explain the same problem in tubepro? thank you
😊
@@ClaraChai 🥰😍
Hello clara i have a problem in my machine, follow exceed upper limit
My member channel, you could find the video.
Hello alarm z limit signal is valid?
Hi clara
Can you help me how i can callibrate my laser cutting machine X and Y axis
Like when i move my machine 1000 mm it actually moves 1010 mm
How i can calculate the exact values
It must be a new machine, correct? How about asking your supplier for a free training?
Hi.iam tara from kuwait.i have problem.madam.so please suggestion me.-alram.z axis is not worktable range
You can check the solutons by this video
I have Problem, Alarm 4Limit -, 4Limit +.
but when i change the focus parameters that's doesn't Change???!!!!
You need to make the axis return origin.
Hello Clara, thank you for your information
So welcome!
@@ClaraChaihow to trouble shoot laser fiber exceed negative stroke of z axis
Hallo Clara I am from india ,I am senfeng laser service engineer I have very difficult problem in my life about y1 Axis motor run but y2 Axis moter is not run in automatic , when trying from drive the moter was run manuly, and also x Axis run only left side , when I am press right side arrow the Axis is going to left side . Plese help me. Thank you.
So you work for senfeng, why don’t try to contact them?
How to solve z negative exceed??
Check your sensor.
@@ClaraChaitell me the step, how to solve Exceed negative stroke of Z axis. Please😢
great informative videos, tks.
Thank you☺️
I have this problem now.
Servo alarm
Thanks
Welcome
You do not give understaning videos its too hard to understand you only speak
Thanks