***** no, if there was an "smd" (surface mounted device) capacitor, we could see it, and anyways, the "smd" capacitor can´t "float" in the air, it must be in a pcb board... I think this is a lie or a fake...
@@MartikLP "In thermodynamics, the Gibbs free energy (or Gibbs energy) is a thermodynamic potential that can be used to calculate the maximum reversible work that may be performed by a thermodynamic system at a constant temperature and pressure. "
if it was in the small coils in the stand i might buy it but if it was IN the motor then he must have made an extremely efficient battery and could make millions of it by the size... he put a battery in a motor that ive found in a "wand" electric screw-driver and he made a battery small enough that th battery that to scale would be this big if you put the thing on the text [----------------------------------------------------------------] around about and it was the this wide: [-------------] so he would make millions of that battery
Hidden battery in the motor then would be my next guess. But it sounds like you have something more crafty than that. I'm not sure that inducing a current is so hard. I've managed to get small halogens and filaments lit wirelessly and I could easily hide the transmitter. But I must admit that the bulb in the other video was very big. I just supposed that you turned up the power on the transmitting coil, and got more out of the receiver. Looking forward to hearing how it's done. Nice vid!
rafii6311 How bout the large inductor coil IN PLAIN SIGHT that stores the energy for a few seconds worth of motor time, notice how the shots are only of a few secnds each
Ben Turner a coil cant stole this much energy @ Mark R comment, you dont need a cap for that. a simple diode would help out converting that AC into squarewave DC
The wire, resistor and inductor on the back of the motor do nothing. There is a desk fan off screen turning the blades on the motor. He may have removed rotor/stator itself, leaving only the spindle/housing, so as to reduce turning resistance. Some people put months of work into projects that are then only seen by only a few thousand people. Yet a piece of bullshit like this can get 100 thousand views in under 2 months. Bit sad really...
Read the video comment first and try to think. The system is initiated with lots of energy at the beginning. There is a toroid coil that can absorb 3A of current - I used them in my Lego power supply. Since the motor does not drain to much current, it can spin quite a while.
directed energy? the evenly spaced open coil reminds me very much of the wireless power system that was being developed for in home appliances, iirc it was running on 900mhz frequencies.
El motorcito funciona com oscilador induciendo el toroides, el cual aumenta el voltaje en principio es el mismo funcionamiento de un inversor, ya que lo carga con una batería, pero no se si esa configuración funciona, deberé probarlo.
sino es de esa manera, ya que le faltaría un capacitor que pueda recargar el circuito, y a la vez no veo el segundo bobinado tampoco el mosfet. Por lo tanto lo mas factible que sea falso, ya que en la carcasa del motor de 9v, entra un motorcito pequeño y tambien un par de pilas chatas.
Sería bueno que el autor del vídeo explicara un poco sobre cómo lo construyó pues veo una pequeña resistencia conectada a la bobina y no sé para qué sirva. Hagamos el experimento en casa y compartamos resultados
Prateek Sharma I think the idea is that induction is being used to make it look like it is getting magical energy from the ether, but is instead just using wireless transfer of energy from an off camera source.
FFS its unduction, are u srsly that stupid:D there is no hidden wire. There is no need for hidden wires lol. its connected as it is shown in the video.... Why would you add more wires?
What fan? The thing to the left is a stool. With a fan I would have to have followed the motor angle, because I move and turn it.... The trick will be unveiled before next saturday on this same channel.
plus an electric fan cant push the blade of the processor fan that fast, till how long would this run without batteries? what makes the motor run? I dont see any capasitor on it.
in this video /watch?v=7-pY4dDYoHQ you can see a demo of electromagnetic induction. It is hard to get even using an iron core. At 0:43 and at 0:51 I separate the motor from the table in order to avoid people thinking of a big coil under the table. So the answer is no.
This is NOT free energy. There is no energy input and hence the rotor is spinning with a constant angular velocity. For there to be 'free energy' you would need to notice an angular acceleration!
You are right that this is not free energy. You are wrong about why, though. It isn't free energy because the things you dont see are the two tiny wires running from the battery that isn't in the video frame.
tartredarrow Check his other videos. He shows the wires, he talks about the wires. A capacitance trick is possible, it just isn't what he's doing. He could also use inductance, but the field would have to be pretty big and moving for the stuff to be moved around like that.
Hi Matthew, you're right, it isn't free energy. But to suggest the (presumed) constant angular velocity proves this is wrong. There are frictional losses and aerodynamic losses from the fan blades, which would stop the motor spinning when the power was removed. _Any_ free spinning shaft would slow and stop eventually due to frictional and other losses - that's obvious, right? No, it isn't free energy because there is a hidden power source, camera trickery, or both: as others have pointed out. Aiki (above) seems to know exactly which it is and I am sure he is right. The video wasn't worth commenting on, but your comment was.
fluchter1996 She, not that it matters. Just representing the female engineers of the world..... Yeah, I'm looking at grad schools, going for a MS in renewable energy engineering. Right now, working on a possible solar powered Stirling engine to help run the future smith and shop I am designing right now. Folks dont get energy. It is really, essentially at it's simplest, just the tendency for gradients to resolve. Electrical gradients, chemical, mechanical, any of them are just stored energy. There has to be a difference and there has to be a force that will cause that difference to resolve in order to have energy. Free energy would the ability to spontaneously create a gradient, to create tension that wasn't there before. That's not something we see much of here in the real world. Water doesn't jump up Niagra Falls. One of the best methods of determining if a process is irreversible or not is simply imagining what the process would look like if a video of it were run backwards. Entropy wins. Reality bats last.
Lets put all the facts straight: 1st: energy (as matter due to E=mc^2) can't be created or destroyed 2nd: we have air and oil friction. Even if friction didn't exist in the machine at all (not even 0,001%), Some energy is being converted into "Work" (another kind of energy that would be used as output), so only way to prevent that is to be already running since the beginning. 3rd: EVEN ignoring friction+work, the system would need to have a 100% energy recycling system. IN TEORY it is possible, in fact it would be possible to achieve such, but not with a tiny contraption, nor even with all resources available to humans at the moment. We would need to create a contained system (heres an idea to create it: gravity) and make so energy can't get in or leave it and then let some energy on the loose inside. Since that energy would not have anywhere to go outside of that system, it would reuse itself, becoming other types of energy, even matter if enough. The problem is, we are not capable of such YET
Vara k you are indeed right but only 99%. Actually, in a universal scale, everything is free, because its balanced (But everywhere inside it, even in an non-contained, non-isolated, tiny-mini system, obviously it isn't) ;)
Richard Zemore actually it was not free. you spent electricity and time. You produced eat and you forced others (including me) to read your post and/or comment it. As i says, in a small scale, nothing is free. (and this is a very tiny scale)
Its annoying to see that the majority of the people who watched this video thought it was real (they liked it), I guarantee you that some random copper wire coils attached directly to a motor will not power anything, and if you think it will then maybe you should go back to school and take a couple reality pills.
chpoit "I always love the heavy breathing in the background when the mike is on but the people are not talking." Yes, well, something has to make that fan spin! You can actually hear the presenter muttering to himself under his breath in some language.
to educate and introduce skepticism into gullible/under-educated people. at least they put a note at the end that tells you it's a trick, unlike the other bogus perpetual motion and "FREE NERGY!!1!" videos
MrStuff414 It was my bad then because as soon as I seen the snake oil he was selling I killed the video and left my reply. Thee are enough of these bogus videos on youtube to have the lesson learned 1000 times over.
barretojaz JAB apparently you didn't wait until the end of the video to comment. If you go to his upload page, you'll find the trick to this video. Spoiler: he put a button cell battery in the motor enclosure. I'm aware inductors and capacitors store energy, but that's not what is going on here, as you'll see if you watch the other video.
There is a button battery inside the 9v batt. power connector. You can see the connection being made as the battery is slowly removed with the one hand.
hola soy pepe me gustaría que me mandase un gmail con los circuitos o cantidad de voltaje de la resistencia para aser ese experimento o a mi facebook pepe martines hernandes gracias
I know what you are using is a Joule Ringer and it will ring for a long time depending on the size of the capacitor and continue to run the motor but not indefinitely. It does gradually run down but it is an efficient use of the effect. Feeding the power to it via a 555 timer so that it is fed a pulse to recharge it before the loss becomes noticeable will give you over unity for a tremendous length of time. If you choose to use a Peizo Crystal battery the motor will probably wear out before the battery which is a very very long time. But alas it is still not free energy. Something will wear out and you still looked at the cost and time of manufacturing it. But mind you it is still very economical.
Thank you Franklin for you explanation. That is so interesting. Thank you so much. Gracias Franklin por tu explicacion tan interesante de como funciona este pequeño invento del ANILLO JOULE. Gracias. Un dia lo provaré
You are over-complicating it, this guy is not even smart enough to know what you are explaining. Just a battery inside. Sometimes they use hair fine wires that can carry just enough power to spin the fan, but the camera doesn't make them very visible. Sometimes you can see the wires. Sometime they use a induction coil you can see on top, and the primary connected underneath the table. If I wanted to, as an Electrical Engineer, I could put on an endless display of hoaxes, but I have a life. And don't want to turn stupid Americans even dumber than they are.
I had 3 ideas. One was yours. One that inside is a verry verry tiny dwarf who is rotating it. And one verry stupid idea. I really dont think its worth mention it but... CAPACITOR MAYBE?
its not fake. the energy is being stored in the magnet and released slowly enough to turn the fan for some time. the total energy that the fan delivers before stalling will still be equal to the amount of energy drained from the battery minus losses and inefficiencies.
It's a fake, this video is made from short kutted videos, between this videos operator charged the capacitor, that store the energy short time lika a battery.
The magic of inductors(coiled yellow ring)...what he did was basically used the battery to produce mechanical work and at the same time build magnetic field on the inductor. When he took the battery out, the inductor took over the battery's role and produced electrical current until the magnetic field that it has collapses...
It's possible to do such a trick using wireless energy from an oscillator coil or an AC power induction coil placed nearby usually within a 1 meter distance.
We can do a lot of tricks with two copper insulated wires (from transformers, relays) which are almost invisible. Just repeat the trick but this time focus on the motor connections and i can tell you that you supply that motor from a separate power supply...
I would use this to cause a loop of energy that would be a self creating energy. How you say? Well cause the panel to vibe rate due to the molecules purposely unstable to create friction to store energy and use a fraction of that stored energy to vibrate the unstable molecules to repeat the cycle. It keeps going and going and going! Or have that energy board stored inside of material which is some type of bacteria that is creating power for the board. The bacteria with break up (garbage) in turn charging the board. This is how I would do it (my idea anyway) what do you think?
Cool vid, but can you explain the principle behind this please?...like where is the energy coming from? moving pictures are good, words to say whats going on are even better
When he connects the battery, his thumb is holding back the motor blades, because its already powered before the battery is even connected. At exactly the right time he released his thumb from the blades as the same time he connects the battery. I think power is either from inside motor casing or coil is actually button cells in disguise
it wasnt magnetism that kept it going, that actually applies overall drag on the motor. it was probably momentum in that large blade that was on the motor that allowed it to keep going for so long
Electricity can be produced from a coil of wire moving through a magnetic field, so the moving coil turned by the motor could produce electricity to run the motor for a longer period of time, but because of friction and the fact that it is not 100% efficient it would eventually stop. It would also not be able to output any Mechanical energy. What I am trying to say is that in is not possible to to have a motor perpetually turn and output power, but it your design was extremely efficient and you had something to compensate for loss of power (solar panel, thermal couples) this is posable.
i charge my cell phone the same way i dont have to plug it in the wall ! so do i get free energy ? i think you forget to show people the hiden coil underneat the table plugg into a power source !!!! 100% fake !!!!!
pretty simple trick, the inductor gets charged during the battery connection. And when the battery is removed the charge on the inductor discharges running the motor.
+Connan Cho for a magnet to induce electricity in a conductive circuit the magnet must be moving so that the invisible magnetic lines of force translate through the conductive loops. This is not free energy as no energy is free by the laws of thermodynamics. The energy required to move the magnet within the conductive loops is equal to the output of the motor minus all internal friction and heat generation. Therefore this motor, as with all motors, take more energy to rotate than they produce.
I'd put some button cells in the motor... Disassemble a few of those motors untill I find one that has enough extra spage to hide two 3v batteries. That's pretty much it. In this video the motor is mounted in a cilinder (maybe from another, bigger motor) and hence space is created for a couple of batteries.
The only free energy is tidal motion. Even solar needs to be stored in batteries (which die), and the wind is iffy at best. Harness the tides. Guaranteed and predictable. They may not be "perpetual", but I think they're gonna be around for a few billion years.
+Bob Desombre youtry the the microwave motor and then you will know how stupid you sound with shit. its obvious you know nothing about energy generation yet you are trying to correct someone that does
The Copper wires + Magnetic Coil or ferret + resistor, acts as a Capacitor !! Pretty cool but would eventually need to be charged up again. Thanks 4 Sharing !!
My guess would be, it's the motor or if it is the light bulb the light bulb itself is modified on the inside, such as embedding a watch battery, or hiding a watch battery in the circuit somewhere.
bonjour j'ai aimer ta video mais pourais tu me detailler les ellement a utiliser, insi que le plant de montage quel resistance a utiliser ,nombre de tour pour les bobine diametre utiliser et ect..... je voudrai essayer part moi meme voir ci ca fonctionne reelement merci encore bonne continuation j'aime
That's normal, the coil stores energy from the battery in it's magnetic field. Similar to a capacitor. But it wouldn't do it for such a long time, I think...
The capacitor holds a charge, That's why he had to jump it with the 9v batt first, How long it runs depends on the size of the capacitor.
i can`t see the capacitor.. i only see 2 coils and a resistor.
*****
no, if there was an "smd" (surface mounted device) capacitor, we could see it, and anyways, the "smd" capacitor can´t "float" in the air, it must be in a pcb board... I think this is a lie or a fake...
smaller motor and battery inside the motor case?
yes
Thank you for sharing it on TH-cam when you could have simply created a trillion dollar industry!
no he could not, free energy doesn´t exist xd
@@MartikLP Never heard of Gibbs Free Energy?
You just can't do free energy look at his videos And you Will get it
th-cam.com/video/06xFhUHFnx8/w-d-xo.html
@@MartikLP "In thermodynamics, the Gibbs free energy (or Gibbs energy) is a thermodynamic potential that can be used to calculate the maximum reversible work that may be performed by a thermodynamic system at a constant temperature and pressure. "
My amateur guesswork says '2nd coil (not in screenshot) induces current (wirelessly) in the coil attached to the motor.' Am I close?
Well the extra band of metal around the motor gives away the fact thats its been opened, there's probably a button battery in it.
how big???? it would have to be like a AAA to work at all
no, button cells can actualy be pretty powerful, two nickle sized ones can even power a computer fan.
if it was in the small coils in the stand i might buy it but if it was IN the motor then he must have made an extremely efficient battery and could make millions of it by the size... he put a battery in a motor that ive found in a "wand" electric screw-driver and he made a battery small enough that th battery that to scale would be this big if you put the thing on the text [----------------------------------------------------------------] around about and it was the this wide: [-------------] so he would make millions of that battery
I hadnt thought of that. Well whatever he did it was clever. Although i strongly doubt he managed to break the laws of thermal dynamics.
Spot on. A button battery and small motor inside a bigger motor's shell. Here's how he did it: Free Energy Motor UNVEILED
Hidden battery in the motor then would be my next guess. But it sounds like you have something more crafty than that.
I'm not sure that inducing a current is so hard. I've managed to get small halogens and filaments lit wirelessly and I could easily hide the transmitter. But I must admit that the bulb in the other video was very big. I just supposed that you turned up the power on the transmitting coil, and got more out of the receiver.
Looking forward to hearing how it's done. Nice vid!
Battery inside the motor housing ?
big induction coil behind the camera or under the table
rafii6311 How bout the large inductor coil IN PLAIN SIGHT that stores the energy for a few seconds worth of motor time, notice how the shots are only of a few secnds each
Ben Turner
a coil cant stole this much energy
@ Mark R comment, you dont need a cap for that. a simple diode would help out converting that AC into squarewave DC
rafii6311 you mean leave only half the wave... you can't make square wave out of AC with just a diode and coils.
The wire, resistor and inductor on the back of the motor do nothing.
There is a desk fan off screen turning the blades on the motor.
He may have removed rotor/stator itself, leaving only the spindle/housing, so as to reduce turning resistance.
Some people put months of work into projects that are then only seen by only a few thousand people. Yet a piece of bullshit like this can get 100 thousand views in under 2 months. Bit sad really...
Big AC coil under the table makes it work. Toroid coil is power pick up plus diode and you have it.
what about the two thin copper wires
Absolutely not!
There aren't wires, you can see it here on the explanation: th-cam.com/video/90z1Cnk7cgU/w-d-xo.html
mopatin ohhh :-)
Read the video comment first and try to think. The system is initiated with lots of energy at the beginning. There is a toroid coil that can absorb 3A of current - I used them in my Lego power supply. Since the motor does not drain to much current, it can spin quite a while.
A capacitor?
They can`t last that long...
well done!!!
you r brilliant to hold the battery that I couldn't see
Could you send me drawings of electrical circuit?
+Cecilia Soto th-cam.com/video/90z1Cnk7cgU/w-d-xo.html
directed energy? the evenly spaced open coil reminds me very much of the wireless power system that was being developed for in home appliances, iirc it was running on 900mhz frequencies.
El motorcito funciona com oscilador induciendo el toroides, el cual aumenta el voltaje en principio es el mismo funcionamiento de un inversor, ya que lo carga con una batería, pero no se si esa configuración funciona, deberé probarlo.
sino es de esa manera, ya que le faltaría un capacitor que pueda recargar el circuito, y a la vez no veo el segundo bobinado tampoco el mosfet.
Por lo tanto lo mas factible que sea falso, ya que en la carcasa del motor de 9v, entra un motorcito pequeño y tambien un par de pilas chatas.
Jorge H. Acevedo Jajajaja... lo que no ves es la secadora de pelo que hace girar el motor.....
si es así es lamentable que no lo haga que funcione sin necesidades de mentir o falsear algo
Es un clásico fake. El motor es más corto y detrás tiene un par de pilas. Está montado sobre una carcaza de motor más grande.
Sería bueno que el autor del vídeo explicara un poco sobre cómo lo construyó pues veo una pequeña resistencia conectada a la bobina y no sé para qué sirva. Hagamos el experimento en casa y compartamos resultados
Battery inside or low friction coefficient between the prop and rod
Nothing is free
That's a illusion i think a very thin copper wire is there which is connected to dc supply :)
well no, its called induction
no buddy its not "energy can neither be created nor destroyed"
Prateek Sharma I think the idea is that induction is being used to make it look like it is getting magical energy from the ether, but is instead just using wireless transfer of energy from an off camera source.
neeneko yes thats what i am saying, the wire is invisible to us
FFS its unduction, are u srsly that stupid:D there is no hidden wire. There is no need for hidden wires lol. its connected as it is shown in the video.... Why would you add more wires?
little engine in micro battery can be there? ))
0:52 I can see the table fan on ground running there.
What fan? The thing to the left is a stool.
With a fan I would have to have followed the motor angle, because I move and turn it....
The trick will be unveiled before next saturday on this same channel.
plus an electric fan cant push the blade of the processor fan that fast, till how long would this run without batteries? what makes the motor run? I dont see any capasitor on it.
mopatin Fraud.
Rob Žemaitis How is it fraud if he straight up says it's a trick?
africa andrew no capacitors, but a solenoide, is the same of a capacitors but whit some wire embranced on a metal core
Good.. But motor is running and we cant see shaft is run and when u attached fan and hold it from ur finger. when ur finger move away fan is start...
There's no such a thing as free lunch !
in this video /watch?v=7-pY4dDYoHQ you can see a demo of electromagnetic induction. It is hard to get even using an iron core.
At 0:43 and at 0:51 I separate the motor from the table in order to avoid people thinking of a big coil under the table.
So the answer is no.
This is NOT free energy. There is no energy input and hence the rotor is spinning with a constant angular velocity. For there to be 'free energy' you would need to notice an angular acceleration!
You are right that this is not free energy. You are wrong about why, though. It isn't free energy because the things you dont see are the two tiny wires running from the battery that isn't in the video frame.
Aiki Xtal My guess is that it's not a battery, but the the device that's wired in there has some capacitance.
tartredarrow Check his other videos. He shows the wires, he talks about the wires.
A capacitance trick is possible, it just isn't what he's doing. He could also use inductance, but the field would have to be pretty big and moving for the stuff to be moved around like that.
Hi Matthew, you're right, it isn't free energy. But to suggest the (presumed) constant angular velocity proves this is wrong. There are frictional losses and aerodynamic losses from the fan blades, which would stop the motor spinning when the power was removed. _Any_ free spinning shaft would slow and stop eventually due to frictional and other losses - that's obvious, right? No, it isn't free energy because there is a hidden power source, camera trickery, or both: as others have pointed out. Aiki (above) seems to know exactly which it is and I am sure he is right. The video wasn't worth commenting on, but your comment was.
fluchter1996 She, not that it matters. Just representing the female engineers of the world.....
Yeah, I'm looking at grad schools, going for a MS in renewable energy engineering. Right now, working on a possible solar powered Stirling engine to help run the future smith and shop I am designing right now.
Folks dont get energy. It is really, essentially at it's simplest, just the tendency for gradients to resolve. Electrical gradients, chemical, mechanical, any of them are just stored energy. There has to be a difference and there has to be a force that will cause that difference to resolve in order to have energy. Free energy would the ability to spontaneously create a gradient, to create tension that wasn't there before. That's not something we see much of here in the real world. Water doesn't jump up Niagra Falls.
One of the best methods of determining if a process is irreversible or not is simply imagining what the process would look like if a video of it were run backwards. Entropy wins. Reality bats last.
The coil + the condenser + the transistor + the diode = the stable oscillator, loading can be any pritany 220 Volts as with a bulb
Lets put all the facts straight:
1st: energy (as matter due to E=mc^2) can't be created or destroyed
2nd: we have air and oil friction. Even if friction didn't exist in the machine at all (not even 0,001%), Some energy is being converted into "Work" (another kind of energy that would be used as output), so only way to prevent that is to be already running since the beginning.
3rd: EVEN ignoring friction+work, the system would need to have a 100% energy recycling system.
IN TEORY it is possible, in fact it would be possible to achieve such, but not with a tiny contraption, nor even with all resources available to humans at the moment. We would need to create a contained system (heres an idea to create it: gravity) and make so energy can't get in or leave it and then let some energy on the loose inside. Since that energy would not have anywhere to go outside of that system, it would reuse itself, becoming other types of energy, even matter if enough. The problem is, we are not capable of such YET
1st: nothing
2nd: is
3rd: free
guess this is much simpler explanation
Vara k you are indeed right but only 99%. Actually, in a universal scale, everything is free, because its balanced (But everywhere inside it, even in an non-contained, non-isolated, tiny-mini system, obviously it isn't) ;)
Vara k
Me making a google just to post this was free.
Richard Zemore actually it was not free. you spent electricity and time. You produced eat and you forced others (including me) to read your post and/or comment it. As i says, in a small scale, nothing is free. (and this is a very tiny scale)
Nope, it was free.
what's the little resister use or what is it, can it powerup faster and spin faster, can you sell it to me, I am tired of battery dieing out on me?
Its annoying to see that the majority of the people who watched this video thought it was real (they liked it), I guarantee you that some random copper wire coils attached directly to a motor will not power anything, and if you think it will then maybe you should go back to school and take a couple reality pills.
I always love the heavy breathing in the background when the mike is on but the people are not talking.
I hear Mike is pretty easy to turn on.
Oh you meant Mic...
chpoit "I always love the heavy breathing in the background when the mike is on but the people are not talking."
Yes, well, something has to make that fan spin! You can actually hear the presenter muttering to himself under his breath in some language.
Is this the new TH-cam fad now to go and put up bogus videos like this? Why?
to educate and introduce skepticism into gullible/under-educated people. at least they put a note at the end that tells you it's a trick, unlike the other bogus perpetual motion and "FREE NERGY!!1!" videos
MrStuff414
It was my bad then because as soon as I seen the snake oil he was selling I killed the video and left my reply. Thee are enough of these bogus videos on youtube to have the lesson learned 1000 times over.
Isn't a trick, just read about laws of thermodynamics, toroidal transformers and capacitors, and u will find the why. Very educational. Respectfully.
barretojaz JAB apparently you didn't wait until the end of the video to comment. If you go to his upload page, you'll find the trick to this video. Spoiler: he put a button cell battery in the motor enclosure.
I'm aware inductors and capacitors store energy, but that's not what is going on here, as you'll see if you watch the other video.
barretojaz JAB
Bullshit! I live and breathe this stuff in a PROFESSIONAL environment every day
of my work life. This is what it is.......A hoax.
There is a button battery inside the 9v batt. power connector. You can see the connection being made
as the battery is slowly removed with the one hand.
I hope you realize, that this breaks the laws of physics, thus impossible.
+Küsh_Lord Can you explain how it's NOT suppose to work or at some point it has a hidden wire?... just saying
+Küsh_Lord sure author of this video already can produce electricity for whole country in hisown pocket device lel....
+GUNVALKERIE just go to school it will be more faster
i guess there must be a primary coil acting as a source to it...
hola soy pepe me gustaría que me mandase un gmail con los circuitos o cantidad de voltaje de la resistencia para aser ese experimento o a mi facebook pepe martines hernandes gracias
Hola, Pepe. Al final del vídeo hay un enlace a la explicación.
If there is a man maid high electro magnetic field consealing near the instrument (AC volt ) .is this free
I know what you are using is a Joule Ringer and it will ring for a long time depending on the size of the capacitor and continue to run the motor but not indefinitely. It does gradually run down but it is an efficient use of the effect. Feeding the power to it via a 555 timer so that it is fed a pulse to recharge it before the loss becomes noticeable will give you over unity for a tremendous length of time. If you choose to use a Peizo Crystal battery the motor will probably wear out before the battery which is a very very long time. But alas it is still not free energy. Something will wear out and you still looked at the cost and time of manufacturing it. But mind you it is still very economical.
Thank you Franklin for you explanation. That is so interesting. Thank you so much.
Gracias Franklin por tu explicacion tan interesante de como funciona este pequeño invento del ANILLO JOULE. Gracias. Un dia lo provaré
You are over-complicating it, this guy is not even smart enough to know what you are explaining. Just a battery inside. Sometimes they use hair fine wires that can carry just enough power to spin the fan, but the camera doesn't make them very visible. Sometimes you can see the wires. Sometime they use a induction coil you can see on top, and the primary connected underneath the table. If I wanted to, as an Electrical Engineer, I could put on an endless display of hoaxes, but I have a life. And don't want to turn stupid Americans even dumber than they are.
si c'est possible une petite explication s'il vous plait et merci.
Fake, but it is a fun magic trick.
¿Nos explicarás el truco?
a smaller motor inside the big one with a battery inside
I had 3 ideas. One was yours. One that inside is a verry verry tiny dwarf who is rotating it. And one verry stupid idea. I really dont think its worth mention it but...
CAPACITOR MAYBE?
its a battery
Stanly Stan No, it wasn't
Anloc Phat So it is a small dwarf after all :)
perhaps at magnet around the motor. and a coil on the motor to resend the energi back from what the motor gives out.
No lo vean es un fake
Don´t watch the video, is a fake.
If You Think This Stuff Is Fake Then Why Waste your time to watch and comment to detour People From Watching the Videos?? Or Any Video Of This Kind???
Because there are people that believe in these videos, and is better avoid this whit a comment.
Ignorance is Bliss
its not fake. the energy is being stored in the magnet and released slowly enough to turn the fan for some time. the total energy that the fan delivers before stalling will still be equal to the amount of energy drained from the battery minus losses and inefficiencies.
It's a fake, this video is made from short kutted videos, between this videos operator charged the capacitor, that store the energy short time lika a battery.
where is the primary coil? Tesla Coil?
"FAKE-FAKE..........................................
I think there is a wireless energy transmission under the plank and the motor get the energy with the coil attached at its pins
where is the joule thief drawing power from
The magic of inductors(coiled yellow ring)...what he did was basically used the battery to produce mechanical work and at the same time build magnetic field on the inductor. When he took the battery out, the inductor took over the battery's role and produced electrical current until the magnetic field that it has collapses...
capacitor? ...It got me thinking about what if you could harness the energy from radio waves from cell phone towers and such to run small things.
It's possible to do such a trick using wireless energy from an oscillator coil or an AC power induction coil placed nearby usually within a 1 meter distance.
the coil acts as a temporary battery. it holds the power. I noticed near the end of the video it was moving much slower.
is there a fan blowing on the fan? that would be one way.
Haha, nooo, but good idea, I didnt thougth of that possibility.
Thank you!
We can do a lot of tricks with two copper insulated wires (from transformers, relays) which are almost invisible. Just repeat the trick but this time focus on the motor connections and i can tell you that you supply that motor from a separate power supply...
I would use this to cause a loop of energy that would be a self creating energy. How you say?
Well cause the panel to vibe rate due to the molecules purposely unstable to create friction to store energy and use a fraction of that stored energy to vibrate the unstable molecules to repeat the cycle.
It keeps going and going and going!
Or have that energy board stored inside of material which is some type of bacteria that is creating power for the board. The bacteria with break up (garbage) in turn charging the board. This is how I would do it (my idea anyway)
what do you think?
Cool vid, but can you explain the principle behind this please?...like where is the energy coming from? moving pictures are good, words to say whats going on are even better
There is a link at the end of the video to the explanation....
you might want to fix that "link"...i was not able to follow any link to find more info im sorry.
could feed a radio cells?
Is that Marko Rodin's coil...?
Then you use resistive wire?
how long does it stay running?
When he connects the battery, his thumb is holding back the motor blades, because its already powered before the battery is even connected. At exactly the right time he released his thumb from the blades as the same time he connects the battery.
I think power is either from inside motor casing or coil is actually button cells in disguise
this is not a fake,simply he uses a tesla coil as reciver of the electric field in the air
Is it solenoid?
how long time rotated motor
Tiny button cell battery inside doughnut coil?
I think it stored the power of the battery or at least slowed it. Or the magnetisim kept it going.
it wasnt magnetism that kept it going, that actually applies overall drag on the motor. it was probably momentum in that large blade that was on the motor that allowed it to keep going for so long
Electricity can be produced from a coil of wire moving through a magnetic field, so the moving coil turned by the motor could produce electricity to run the motor for a longer period of time, but because of friction and the fact that it is not 100% efficient it would eventually stop. It would also not be able to output any Mechanical energy.
What I am trying to say is that in is not possible to to have a motor perpetually turn and output power, but it your design was extremely efficient and you had something to compensate for loss of power (solar panel, thermal couples) this is posable.
The large coil is fed via induction from under the table. The toroid stores the energy as a buffer for a certain time. Nice trick. ;) 👍
do you know how fucking dangerous that would be
what is the resistant u used for this?
At the end of the video there is a link to the explanation.
how?????? can you explain how to this working????????
+arun andrews th-cam.com/video/90z1Cnk7cgU/w-d-xo.html
i charge my cell phone the same way i dont have to plug it in the wall ! so do i get free energy ? i think you forget to show people the hiden coil underneat the table plugg into a power source !!!! 100% fake !!!!!
with a fan
+arun andrews Oh my god, what the fuck is wrong with you? Do you use medication to surpress the symptoms due to absence of brainmatter?
with battery in the premade Motor!
what is the number of resestent
Plz tell me
ask yourself the 2 black wires are connected under what
Nossa que interessante!!! Qual o principio do funcionamento? Obrigado
pretty simple trick, the inductor gets charged during the battery connection. And when the battery is removed the charge on the inductor discharges running the motor.
The coils works as an antenna collects microwaves and turn the motor which consumes very little power.
I'll buy it. How much?
Remote induction from a near by tesla coil to the toroid or larger coil maybe
+Connan Cho for a magnet to induce electricity in a conductive circuit the magnet must be moving so that the invisible magnetic lines of force translate through the conductive loops. This is not free energy as no energy is free by the laws of thermodynamics. The energy required to move the magnet within the conductive loops is equal to the output of the motor minus all internal friction and heat generation. Therefore this motor, as with all motors, take more energy to rotate than they produce.
can you teach how to build this
I'd put some button cells in the motor... Disassemble a few of those motors untill I find one that has enough extra spage to hide two 3v batteries. That's pretty much it. In this video the motor is mounted in a cilinder (maybe from another, bigger motor) and hence space is created for a couple of batteries.
for how long it stay running?
The only free energy is tidal motion.
Even solar needs to be stored in batteries (which die), and the wind is iffy at best.
Harness the tides. Guaranteed and predictable.
They may not be "perpetual", but I think they're gonna be around for a few billion years.
+TacomaPaul A guy lived 100 years ago and if he would have heard you say that - you'd get smacked.
+Bob Desombre youtry the the microwave motor and then you will know how stupid you sound with shit. its obvious you know nothing about energy generation yet you are trying to correct someone that does
this is fun! nice work with a joule ringer nd few components the electricity gets trpped in the circuit.
The Copper wires + Magnetic Coil or ferret + resistor,
acts as a Capacitor !!
Pretty cool but would eventually need to be charged up again.
Thanks 4 Sharing !!
Its fake
when you remove battery it can ran i know, but only few seconds while inductor charge.
Lemme guess, the induction is actually a toroidal magnet?
Nope. At the end of the video there is an annotation link to the explanation of the trick.
My guess would be, it's the motor or if it is the light bulb the light bulb itself is modified on the inside, such as embedding a watch battery, or hiding a watch battery in the circuit somewhere.
en.wikipedia.org/wiki/Inductance is it the toroid drainage that's running the fan?
That's not free energy.... U charged that copper coil so called as inductor and ur using that same energy to run that tiny motor....
bonjour j'ai aimer ta video mais pourais tu me detailler les ellement a utiliser, insi que le plant de montage quel resistance a utiliser ,nombre de tour pour les bobine diametre utiliser et ect..... je voudrai essayer part moi meme voir ci ca fonctionne reelement merci encore bonne continuation j'aime
At the end of the video there is a link to the explanation
Cool but how does it stop
try a strong permanent magnet instead of relying on the battery to turn the inductor into an electromagnet
There is small fand out of that camera view by that wind it is blowing and rotating this fand...👍✌️
try the same with a piece of tape on the shaft instead of a propeller.
You'll need a stronger fan to make it spin.
how long time move?
Look here: Free Energy Motor UNVEILED
mopatin thank you
Ha, ha ha, I dont know. As you can read at the end of the video it is a trick. Cant give you more details. Before Christmas I will post the solution.
*looks at calendar* You say you'll publish the trick?
I guess it is related to induction current. There is something like electro magnet (circular thing). I don't know exactly.
That's normal, the coil stores energy from the battery in it's magnetic field. Similar to a capacitor. But it wouldn't do it for such a long time, I think...
Mmmmm, watch this video: Free Energy Motor UNVEILED
of course!. I have just completed the annotations at the end of the clip...
how long will it do???
At the end you have an annotation link to the explanation.
how about show us how to build that thing? its pretty interesting.. :D
At the end there is an annotation with a link to the explanation.
gee thanks