How to Install iJDMTOY Sequential Flash Module Box
ฝัง
- เผยแพร่เมื่อ 1 เม.ย. 2018
- Introducing iJDMTOY’s Universal 3-Step Sequential Flash Turn Signal Module Boxes. More info here: store.ijdmtoy.com/-p/aa1259.htm
If you are new to adding mods to your car, stuff like our 3-step flash module box can be a bit intimidating. Wiring is actually pretty easy once you know how to do it! This is a guide on how to wire our turn signal sequential flashing module boxes.
Please note that this dynamic flash module box set will not work on light bulbs that are used for both turn signal and brake lights.
Follow us on social media!
FB: / ijdmtoy
TW: / ijdmtoycom
IG: / ijdmtoy
G+: plus.google.com/+iJDMTOYLighting
PIN: / ilovejdmtoy
Blog: ijdmtoy.com/BLOG/wordpress/ - ยานยนต์และพาหนะ
Nice video now i can connect it to my car the module boxs
How change time? I need slower sequential flash
would pressing on the brake cancel out the sequential flash?
Quick question can I use to make a 3 function bumper led light
Can it work on a 2004 Buick lesabre
Or a simpler question can the output be used as an input and can the input be used as output
I need it with 5 steps .. could you please help me with it ???
Can it work on a 2007 mustang Amazon says it can
Do they work with led strips?
Why u guy do not make this video installation in a car ? Cuse this do not work in a car? That's why?
Doesn’t require relay ?
Pues no funciona, si conectas las entrada a 12V la salida te da 100 mV esos quiere decir que es solo la etapa primaria del controlador, es decir hay que acoplar un relay con la fuente a la salida para que funcione
Hay I did exactly as you said red wire to the turn signal harness it's yellow for the drive side, black I grounded to the car, then I grounded all three ground to the black common ground wire, last the three positive wires to the remaining wires, but when I cut the turn signal on they blink real fast and it seems like the blinker function in a car is working against the blinker function in the box
I'm trying to figure out the same thing. I believe that you take the turn signal wire prior to the flasher relay.
Awesome! Super useful. Are these available on Amazon yet?
Yeah.A link from their amazon ad sent me here.
How much and where can I get it
can this be used with only two lights?
Sure it could.Without the 3rd wire hooked up,power will go to it but just wont flicker a bulb of course.It will just flicker the bulbs the first wires are hook to.You actually have an advantage.You would find the wire that flickers first from the box,hook up your first light to that,then find the wire that pulses second and third.Now you have the option to use the second or third wire for your second light.Why? Use the second wire for a faster pulse between the first and second wire.Use the 3rd wire pulse for a slower pulse between your first and second lights.Cool uh? Be sure to cap off your 3rd wire so when 12v pulses through it,it can't short to ground.
Would be wonderful if the lights stayed on while cycling, but they dont :/
Soo it’s not worth it?
Jesus Chavez no