How to vent Injora bead lock wheels.

A quick video explaining how I vent a new set of Injora bead lock wheels.
If you enjoy our content, you can support the channel by buying us a beer!
www.buymeacoffee.com/havikhob...
Injora bead locks can be found here:
www.injora.com/products/4pcs-...
Rc4wd Super Swamper IROK 1.0 here:
store.rc4wd.com/RC4WD-Interco...
And Rc4wd Scrambler 1.0 here:
store.rc4wd.com/Scrambler-Off...

[@StanGrigsby-tz9dy]

Thanks! Best vent video out there!

[@havikhobbies]

Thanks mate! I personally don't like venting the tires, so figured I'd throw some ideas out there!

[@pandacrawler6x6]

Great and Beautifull Wheels!!!! Naice Tuturial! Loved and Subscribed! Cheers!

[@havikhobbies]

Thank you! Injora makes some really high quality parts.

[@pandacrawler6x6]

@@havikhobbies Indeed 🐼👍🏻

[@snorrevonflake]

On a similar wheel (the black brass 47 g) i just left out every second screw on that beadlock ring, looks better (for my taste) and air gets out. Usually i drill two holes on opposite sides of the rim and of course also through the ring.

[@havikhobbies]

That's good to know! I have another style of Injora wheel that has air paths between the two wheel halfs so only the ring needed drilling!

[@giopirmisashvili5514]

Thank you

[@havikhobbies]

Not a problem at all, thanks for watching!

[@richardjohnmallari8463]

Where do you buy your Center punch? Can you send the link please?! Thanks.

[@havikhobbies]

The center punch used in the video is a Matco branded unit but appears to be a rebranded Lisle centere punch. www.jbtools.com/lisle-30280-automatic-center-punch-5-1-2-long/?wi=off&gad_source=1&gclid=Cj0KCQjwn7mwBhCiARIsAGoxjaLg0Q2zN6vuISpLOfSwg0pskdI64iUrbt6yL40drqv3qpU3YeOib60aAiSZEALw_wcB

[@keithbutler6361]

Is this a better idea then venting the tires themselves.

[@havikhobbies]

I prefer this method because I've found my foams pick up less dirt and moisture than with vented tires. You can run on damp surfaces without water getting into the foams. Just personal preference really!

[@keithbutler6361]

@@havikhobbies I see what your saying now , good idea mate .

[@GeezerGramps]

When I ent my wheels I normally drill holes 180 degrees apart

[@havikhobbies]

That's probably not a bad idea!