We Built A Star Wars Cantina
ฝัง
- เผยแพร่เมื่อ 16 ส.ค. 2023
- We built a Star Wars Cantina . . . ok to be fair, we are still working on it. BUT . . the drink rail is a pretty exciting part of the build and we are so pumped to share that with you today. Hope you enjoy this part of the project!
SUPPORT THE SHOW!!!
Enjoying our episodes? Do you want a behind the scenes look and more? Consider supporting us on Patreon and helping us keep all this geeked out shenanigans going!
/ thesmugglersroom
Make sure to Subscribe!!! goo.gl/FpnuFy
You can find us and more of our builds and content below!
www.thesmugglersroom.com/
/ thesmugglersroom
TheSmugglers...
/ smugglerroom - แนวปฏิบัติและการใช้ชีวิต
![ถ้าพี่วุ้นท้อง แป้งจะท้องไปด้วยกัน !!!! [ดูคลิปเต็มหน้าช่อง] #Short | PANG ORNHIRA](http://i.ytimg.com/vi/FeyEnVMwitA/mqdefault.jpg)
Hi Brian - inspring as always. When you were discussing how heavy a full aquarium would be - it reminded me of the 20000 leagues ride in Disneyland Japan. Where they simulate an underwater ride by creating a ultra thin tank of water in the submarine windows with a bubbler at the bottom -sandwiching water between two acrylic plates - so you are looking through the 1/4 inch of water at the completely dry ünderwater"" scenes beyond. You could do the same (if you were doing it again) - with the tank - get a slightly smaller aquarium to fit inside - and filling only the gap between the two tanks with water and bubbler outlet. Should be lighter and allows you to put something in the inner tank without it getting wet. Just a thought and probably harder than I think to do.
Fantastic idea! Thank you for that!
Awesome!😀
Thanks bro! Glad you liked it!
This turned out INCREDIBLY!!!
Looking great, Brian! (and the antenna is so that the aquarium can let you know how when the creature needs more Fat Bantha, of course
BOOM!
I have been eagerly awaiting this update. This channel has changed my life from just watching Star Wars to living in it. Thank you for all the inspo & guides. 🙌🏻
Thank you! We certainly hope it was worth the wait!
Now you need to make some Star Wars tap handles. Not just for your tap but as decorations. My small (20 +) handle collection is one of my favorite things. Especially the ones from small breweries with funny names. As always, great work!
That would be cool! Thanks!
With the aquarium, what if you found another acrylic tube about an 1” smaller OD and use that on the inside to give the illusion that it’s full without having to fill it up completely with water. So you only have a 1” thick water layer between the two acrylic tubes. Just a thought.
great idea! Thanks!
The Cantina is looking amazing! I wonder if you could somehow build a thin tank to hold water just behind the aquarium front to give the illusion of it being filled with water but without the weight becoming an issue? Still it looks amazing - Great job!
Great idea! Thank you!
Brian, dude, Nice!!!! I'd belly up to that bar to enjoy a cold one. You two have done a great job. Two thumbs way up my man.
Thank you!!!
pretty cool. I like that you will have butter beer.
Dear Brian you are very lucky : your cantina is more comfy and pleasant that the Mosesley old smuglers cantina !!!
Do you have some ideas about all the furnitures used in that cantina ? Not only for the desk (?) but also for the custumers ? Plates, glasses, seats, but also advertissements about strange beverages and weird foods ? I am sure Carrissa has some magnificent projects about all this mass !
Just think outside the box. So many ideas!
Love, love, love seeing more of the room build!!!! ❤😊❤
awesome! Glad you like it!
Awesome. Really looking good!
Looking great! Don't knock your execution style. I am similar. I am currently prepping for Halloween and building a large scale replica of the scene from Disney's Trick or Treat. It will have Huey, Dewey and Louie around the caldron and Witch Hazel as well. Sometimes you have to take a break, let your mind and soul catch up a bit then jump back in. Here's my idea on your tank. Since it is a tapered design, you could get another tank, cut it down so that the top and bottom edges aren't visible through the oblong cutout. Measure the deltas between of the styrene cutout and then subtract that from the cut down aquarium but make sure you account for the thickness of the bottom of the aquarium other because you dont want to see the bottom of the nestled aquarium. Place it inside the other aquarium tank, fill that with the fluid and a bubbler could be integrated on the backside. I can picture it in my head and will try to render something in Blender and post it like on printables so you can see since Im not sure how to get a back of napkin diagram over to you.
Looking amazing, well done. That mystery fitting looks like something out of an old washing machine, very cool 😊
Thanks 👍
Looking really cool, it's going to be so awesome when it's all done.
Hope so! Thank you!
I subscribed to your channel for years, but mainly watch on a TV. I finally got around to reading the descriptions on another device and realized just how valuable all the product links you share are. Just placed about a $750 order on Amazon, primarily through your affiliate links. Hope it helps!
Thank you so much! It really does help us.
Aaaaahhhhhhh so exciting! It's looking great! I've been under the weather for a few days but I dragged myself out of bed to watch this on the big TV!
Sorry to hear that. Hope you feel better.
@@TheSmugglersRoom Thanks, definitely doing better than I was 👍
I’m catching up on a few videos of yours I’ve missed. Solid work as always. Thanks for the inspiration!!! ✌🏾➕✊🏾
Welcome back! Thank you!
Once again, great design sense. Looks great, man!
Thank you! Cheers! Appreciate you my friend
YESSS!!
Glad you liked it!
I love it! Part of me wants the Butter Beer in aruebesh. Kind of like how I have a coffee cup that says “wrong timeline” in Gallefreyan. XD
Yeah, but I like to mix my genres 🤣
All this talk of liquids made me thirsty 😂 9:43 either a weed whacker component or a light fixture for them old single light bulb lights 🤔
Thank you!!!
@@TheSmugglersRoom tbh im not sure what it is just given my best educated 2 cents 😅
Very nice!...looking forward to the next video...stay safe!
Thanks, will do!
Impressive! Most Impressive and inspiring for a future build I want to do
Hey, instead of filling completely with water you can add another turbe or clear bottle in the middle to reduce the space inside
Great idea! Thanks!
Can not wait untill the next video this has me deeply intrested
Thank you!
Love watching your builds. Thanks!!!
Thanks for watching!
yes!!! been waiting for this!!!
awesome! Hope it was worth the wait!
That looks Amazing. Awesome build.! 😁👍🏾
Thank you! Cheers!
Wizard!!!!
Ok thats realy cool😎👍
Thanks 👍
This is incredible!
Thank you!
Looks outstanding, have you considered making a glass rack hanging down from the pipe? Like a wine glass rack and the whiskey glass holder to prevent dust collection in them.
We haven't but . . . I can tell you there is something very interesting planned for that spot coming soon! LOL
Love how the bar is looking.. You said you wanted to put a creature in it you should look up Schleich Eldrador Ice Spider would look great.. The brand has a few creatures that would be out of this world for your builds.. Plus I think your next tank you should go with a fire affect with one of those fire lightbulbs you can fine in a few different colors.. Keep building..
Thank you for the suggestions! The Ice Spider is a GREAT idea! Thank you!
Looking awesome!
Thank you! Cheers!
Love this Brian!! And you already know what a huge fan I am of the Fat Bantha Beer you have on tap!!! My mouth was watering as you took a big drink lol! Most excellent work my friend. And again... even more amazing in person!! Still can't believe I'm able to say that!!!
Thanks bro! So glad you were able to come out!
Omg I love it
Awesome! Thank you
Working on a very similar project right now. It’s cool to see the different approaches. My tank tapered too, but I caught it in planning because I’m one to plan everything before cutting anything
Awesome! Planning certainly helps!
I've been looking forwardto this one!
Hope it was worth the wait!
It turned out great! I mess around with old Jukeboxes, and one of the tricks they used for some bubbles, they would have a tube inside another tube that way only the gap between the 2 tubes has to have liquid. It cuts down on the weight dramatically. I love how your is turning out.
Ichutu Ponwada Mai Endin Sanuku. Translated into Galactic basic: Give me a double of Corellian Whisky with Kashyyyk Sours.
Awesome as always!!!
Thank you! Cheers!
Love it!!!
Thank you!
Nice bar!
Thanks!
Bro, looks sick. Coming along fantastic. Bee to WDW 2 time, spent a lot of time in Galaxy's Edge but have yet to go in the Cantina. Its always packed and stupid anxiety issues. Nice to see a piece for the room coming together man. Keep the momentum going.
Yeah, it gets crowded in that cantina for sure, totally get it. Hopefully you’ll get a chance when there are less people.
Amazing 🎉🎉
Thank you! Cheers!
That veri cool end nyce i love it 😮
Thanks!
awsome guys
Thanks
I love it when a room comes together.
Me too! LOL
This looks sooo good!
Thanks!
The DL-44 muzzle tap stole my heart!
BTW how about a dianoga inside the smoke thingy?
LOL! Glad you liked that. Thought it was fitting. And shhhhh . . . don't ruin the Dianoga surprise ;)
Very cool. As always :)
Thank you! Cheers!
That came out great! Yes I loved the Galaxy's edge vibe you got going on there too. that portal looks like the one where the alien pops up while your taking a drink from the water fountain! lol awesome!
Thanks so much! 😊
That aquarium looks great i am wondering if you thought about adding a second clear container to take up room on the inside to create lower volume bubbling liquid and having the creature dry in the center looking like it's floating in liquid?
That's a great idea! Thank you!
Awesome! I wonder how a drink rail like that might fare on an outdoor kitchen? I love the Fat Bantha banner!
ooooh! I bet it would work great!
absolutely love what you're doing here Brian!!! fantastic progress. progress. progress!
Thanks so much!
Your cantina is totally out of this world, looks really great, awesome job 👏👏
Thanks so much! 😊
Fantastic build. Shame you had to compromise on the bubbly bits but I bet that creature is going to look awesome!
Thanks! We'll figure out something cool, it's never too late to make changes right?
@@TheSmugglersRoom Definitely never to late!
Another great project and video. Love seeing others' creative processes, and this was just what I needed to liven things up between boring conference calls!
Awesome! Thank you!
if u use a double walled container, u can add liquid without it eing to heavy, in the doubled layer.
Thank you! Great idea!
You can also laser cut styrene (if the piece you want to fit fits in your laser cutter). That's how I cut my droid skins. If fact access to a laser cutter is what made me undertake building a droid!
You can?? I was under the impression that Styrene could not be cut on a laser cutter. Would love to know more.
@@TheSmugglersRoom you sure can! You can cut ABS as well but that smells really bad. Styrene does not have an odor though for the most part and cuts very nicely. If you decide to try it I would start with small test pieces to see how it works on your machine. Keep an eye on it just to make sure nothing really bad happens. And unlike acrylic, you can't really engrave, just cut. The main materials I would NOT cut on a laser are polycarbonate (aka lexan, because it does not look good) and PVC (sometimes just referred to as vinyl) which can release nastiness. EVA foam, even though it contains vinyl, can be cut because it is vinyl acetate and not vinyl chloride. Take this comment with a grain of salt though, your milage may vary and you assume all risks, etc etc. Keep up your awesome builds!
When you expand your beer cave with new weathering heights.... (See what I did here).... #kewl #cool 😎
LOL!!!
The bar is looking so fantastic, love the build on this episode - great job 🍺 cheers 😊
Thank you! Cheers!
Looks amazing! Have been to Galaxies Edge only once but loved Olgas and all the themeing and details
Thank you!
Thanks again for the awesome video!
I'm currently planning my b-day party and this really inspires me to do something like this as well.
Fantastic! Happy Birthday!
Cross head (or Phillips here in the UK) screws are fine in the SW universe ...see the top of Rey's staff...If it doesn't fit, force it is perfect for a TWSS after it...sorry I can't help it ;) great work
LOL, yep, certainly have seen the cross head screws, I just always like to joke incase the keyboard warriors are out there ready to pounce! LOL
That turned out great! Good choice leaving the open space for the aquarium; it’d be a shame to cover it and it’s less work; win win.
Yeah, we hated to cover it. We left room for additional taps that could be low profile.
If you guys build a Jabba bong i promise i will send you some space herbs i personally grow right near where they filmed Endor.
LOL!!! Outstanding!
Dude that looks so cool! I want to know where you got that light puck from! I need to get some of those!
Thank you! Here you go! . . . amzn.to/3Z2jIOL
Am I the only one who puckers their bumbum when makers online drill into their cutting mat?
there was a wooden block below it. Trust me!
Incredibleeee!! What is the little smoke machine and the puck light that you used? Looks perfect!
Its a simple and cheap halloween mist maker. Here is a link if you want one (it's affiliate, but does not cost you any additional money, just helps us out a bit) amzn.to/3E2XVgf
@@TheSmugglersRoom awesome..thanks!
The Bar is looking great, Do you allow Droids in your bar?
Absolutely!
Nice, looking great. What ya got kegged?
Thanks! Right now it's Breckenridge Amber ale.
@@TheSmugglersRoom gonna have to look for it. Must be good if you have a keg. :)
9:43 You should change the "BUTTER" to "FAT BANTHA".
Nope! We love us some butter beer and Harry Potter has to represent!
Can I ask where you got that round aquarium? I've got a vinyl alien facehugger model I've had for years and would love something like that to make a display for it, like the movie.
You bet. Here is a link (it's one of our affiliate links, but that doesn't cost you anything. It just kicks us a couple bucks if you buy it) amzn.to/3YDmHNw
An inscription found on the wall of an ancient chariot repair shop “Don’t force it, her a bigger hammer”
LOL! Love it!
Glad you appreciated it.
Looks amazing! Isn't the Butter Beer dispenser also going to have an issue with weight and attachment?
Not at this time since it is going to be display only at the moment.
@@TheSmugglersRoom Ah
Hello, you probvably received this question a lot of time, but do you know where can i buy this type of set for a star wars themed room ? Even plan for making the whole house haha. I have plan to make something really realistic, like your in disney. I live in france, i don't know if there's such shop here. Thanks
Do you mean to purchase what we have made here for our room? I am not aware of any shop that you can buy this sort of thing, but maybe you could use the things we teach and make one for yourself?
With you be serving Tranya?
Where do you order your styrene from?
I actually get my styrene from a local supplier called "Plasti-Care"
Are you two coming to DragonCon?
Not this year. But next year YES
WIZARD!
Thank you!
Here's a quick video of what I was trying to suggest I just put together for you Brian : th-cam.com/video/0g_P1fJwmIc/w-d-xo.html Now I am going to have to build this. Mine will have a xenomorph though LOL!
why does it 'need' an antinia... lo-fi wi-fi...
LOL!!!
True Star Wars, repurposing parts. Really like reusing the front of the DL-44.
Thank you!