Hello friend, excellent video, I really liked it, I wanted to know if you could give me the measurements of the vehicle or maybe you could tell me in which page I could get them, it would be very helpful friend
The frame never changes just remade over and over chrome molly I'm guessing. What if you double the other side for the bearings on the rear axle, will it add to much weight, will it reduce axle flex on that side just curious.
I'm curious about kart weight, my mates Tony kart must weigh double mine, in fact mines about 145kg INCLUDING me kitted up and front brakes. I think his is closer to 150kg without him. His is meant to be very fast with a 125cc rotax, and with a driver weigh 260kg. I'd like to know how they can weigh so much different, and whether my mates 110kg weight will affect things?. Could someone that heavy damage a light weight kart, or are the differences in weight due to better materials used but same strength?
There must be a problem with your numbers. All kart chassis are similar in weight. A difference of more that 3 - 4 kg would be unusual assuming we are talking about the chassis only. A Rotax 125cc on a Tonykart would weigh about 84-88 kg I would guess.
Angle of the steering hub is bogus. Steering wheel angle is like a bus. Very hard on wrists and arms. Bought an angled aftermarket hub to bring wheel down to where it should be.
It is weird is you turn the wheel a lot...but good drivers hardly turn the wheel at all. Watch in kart video from any top driver.... When 11:00 to 1:00 is the range of wheel turn...the angled hub is just fine...
Andrew Kay The likely reason for that is the engine mount was done up too tight and therefor the chassis was unable to flex properly. Always back the engine mount off a quarter tern and lock it in this position once you have set the chain tension. This will allow the chassis to flex and this will stop it from cracking.
J -13 hi The engine mount is always backed off away from the engine. These clearly cracked due to some sort of manufacturing issue. The chassis tube is regularly lined with a sleeve that is available from the importer & this cures the problem. This is not a problem if you race the chassis for a meeting & then discard it, but when you are a club racer & want the chassis to last a season you have to sleeve it
It's missing front brakes and an engine that makes 120dB, well I got my 1995 Swiss Hutless with 1986 Honda CR125R engine, you need earplugs to run it and earplugs when its exhaust is facing you when you spectate :D
I just bought front brakes to add to mine. They cost £850 new and weigh about 15kg. They are NOT race legal, they can be a liability if used cornering. 1 front lifts in corners, other tyre stops, you spin... they are more about pure posing now. Frankly they look awesome, and should have benefits stopping in a straight though, plus race starts, and maybe donuts if your really crazy.
Hello friend, excellent video, I really liked it, I wanted to know if you could give me the measurements of the vehicle or maybe you could tell me in which page I could get them, it would be very helpful friend
The frame never changes just remade over and over chrome molly I'm guessing. What if you double the other side for the bearings on the rear axle, will it add to much weight, will it reduce axle flex on that side just curious.
twotwocold brake disc and caliper are in the way
where are you buy the chasis m
Do you also make custom parts?
Can I buy just the frame??
Una meraviglia 🤩
very cool
The best
I'm curious about kart weight, my mates Tony kart must weigh double mine, in fact mines about 145kg INCLUDING me kitted up and front brakes. I think his is closer to 150kg without him. His is meant to be very fast with a 125cc rotax, and with a driver weigh 260kg. I'd like to know how they can weigh so much different, and whether my mates 110kg weight will affect things?. Could someone that heavy damage a light weight kart, or are the differences in weight due to better materials used but same strength?
There must be a problem with your numbers. All kart chassis are similar in weight. A difference of more that 3 - 4 kg would be unusual assuming we are talking about the chassis only. A Rotax 125cc on a Tonykart would weigh about 84-88 kg I would guess.
@@YZF648 my kart, a 401 tony kart, about 75kg, that other was a 150kg kart, same as 801 tonykart.
My Tony Kart OK weights 145 driver included
Angle of the steering hub is bogus. Steering wheel angle is like a bus. Very hard on wrists and arms. Bought an angled aftermarket hub to bring wheel down to where it should be.
It is weird is you turn the wheel a lot...but good drivers hardly turn the wheel at all. Watch in kart video from any top driver.... When 11:00 to 1:00 is the range of wheel turn...the angled hub is just fine...
What about FA also got an update for 2019?
Yes FA Kart has no difference with Tony its completely the same kart but in other color
Dmitrij Kordi FA is gone, went to Kart Republic
Bellissimo!
Great
Amigo me puedes dsr la medida de un chasis pir favor
voll geil
Shame so many are cracking around the rear axle bearing mountings behind the engine. Ours lasted two meetings. Importers not interested
Andrew Kay The likely reason for that is the engine mount was done up too tight and therefor the chassis was unable to flex properly. Always back the engine mount off a quarter tern and lock it in this position once you have set the chain tension. This will allow the chassis to flex and this will stop it from cracking.
J -13 hi
The engine mount is always backed off away from the engine. These clearly cracked due to some sort of manufacturing issue. The chassis tube is regularly lined with a sleeve that is available from the importer & this cures the problem. This is not a problem if you race the chassis for a meeting & then discard it, but when you are a club racer & want the chassis to last a season you have to sleeve it
Andrew Kay it’s the same in every chassis, KR, OTK, Birel, the chassis are so softs it’s normal. The softest the fastest (sort of)
Красота.........
It's missing front brakes and an engine that makes 120dB, well I got my 1995 Swiss Hutless with 1986 Honda CR125R engine, you need earplugs to run it and earplugs when its exhaust is facing you when you spectate :D
Cool story bro
I just bought front brakes to add to mine. They cost £850 new and weigh about 15kg. They are NOT race legal, they can be a liability if used cornering. 1 front lifts in corners, other tyre stops, you spin... they are more about pure posing now. Frankly they look awesome, and should have benefits stopping in a straight though, plus race starts, and maybe donuts if your really crazy.
An ok senior has a huge sound
@@lucabettoni1452 maybe not as loud as the cr125 apparently. That sounds like an animal.