could u show the evap canister lines nd also were the fuel pressure regulator vacuum line connection i cant find no vacuum diagram thanks great looking car
I would take a pic for you but don’t know how to send it on TH-cam. The canister on my truck has two hoses the big fatty one in the center goes to the steel fuel line that goes to the gas tank. Other one goes to the solenoid (purge maybe?) that has blue plug. The fuel regulator hose goes to to another solenoid that has a black plug. Hope that helps.
It's been a long time since I've done it. As far as I remember it's plug-and-play. The only thing you have is to re-route the tach cable through another hole behind the gauge instrument, but it's super easy. Also, keep in mind that extra cabs have different fuel tanks, so if you get one from an extra cab truck it will not display the fuel tank gauge correctly. Mine shows 95% full on the gauge when my tank is at %100 full capacity, but it's a minor issue for me since it's a very close reading. The temp gauge works fine. Hopefully, this helps.
It depends what your situation. It’s a cool truck and don’t to drive, but newer cars are more comfortable for daily driving. I would hate to use my truck for everyday driving. It also sucks on the highway for long trips.
I’m Mexican and I used to drive these trucks as a Gardener
I drove one of these from 2004-2012. This brought back some memories. Thanks for posting.
Saw an old modded one a few blocks from my house and I had to look it up😍
I have in factory box complete a/c system for 1986 truck. And very low mileage b2000 engine .great trucks I had two
The truck I have heard so much about!
Looks like you got a good deal! Nice truck.
Memories...owned one in highschool.
I drove my b2600i commute 70 miles round trip everyday BEAST of a truck
Noise is input bearings
I got a 1987 se5 with only 191,000 original miles runs great.Thinking about lowering but not sure how low.
3 or 4 inch Lowering blocks on back and loosen the torsion bars bolts to lower the front.
Only 191,000? That's not exactly low miles
could u show the evap canister lines nd also were the fuel pressure regulator vacuum line connection i cant find no vacuum diagram thanks great looking car
I would take a pic for you but don’t know how to send it on TH-cam. The canister on my truck has two hoses the big fatty one in the center goes to the steel fuel line that goes to the gas tank. Other one goes to the solenoid (purge maybe?) that has blue plug. The fuel regulator hose goes to to another solenoid that has a black plug. Hope that helps.
What’s the temperature on the gauge?
Nice!! 💪
I got a b2200, but have the 2.0 engine very reliable truck 😁😁😁
i was wondering how you did do the fuel injection i got a 87 b2200 se-5 and would really enjoy to swap
Im looking for chrome grill and chrome rear bumper
I've got the same truck, it's stuck in reverse though. Any idea how to get it out?
Was the new dash cluster a simple plug ?& play for the oil temp / coolant temp / tach displays??? or did you need a new harness or plug??
It's been a long time since I've done it. As far as I remember it's plug-and-play. The only thing you have is to re-route the tach cable through another hole behind the gauge instrument, but it's super easy. Also, keep in mind that extra cabs have different fuel tanks, so if you get one from an extra cab truck it will not display the fuel tank gauge correctly. Mine shows 95% full on the gauge when my tank is at %100 full capacity, but it's a minor issue for me since it's a very close reading. The temp gauge works fine. Hopefully, this helps.
This video is now 2 years old so I’m guessing I’ll get no response. But would you recommend as a first car?
It depends what your situation. It’s a cool truck and don’t to drive, but newer cars are more comfortable for daily driving. I would hate to use my truck for everyday driving. It also sucks on the highway for long trips.
Where did you get the fuel injection for it and was it hard to convert?
I bought a complete EFI truck from salvage auction and swapped everything over to my truck. It's not hard, but very time consuming.
Thanks for the info.
@@dunemaster3179 do you get efi from b2200 to fit b2000? Or its b2000 efi?
@@leonardjuarez1 it’s from b2200
👍👍🤟
Very cool truck. Do the series with upgrades and mods. (Like donut media money pit)
th-cam.com/play/PLFl907chpCa4WmBZlSv2FfWTiFAwvUeT6.html
Thanks. Maybe I will do something similar in the future. It takes a lot of time to make good youtube videos lol