I'd like to see a Husqvarna TE 449 just because it's a very uncommon husky that almost nobody knows about and maby underestimates when seeing.. Love your work!
Project idea: fly me in the the shop, go choose a bike with me, customize it with me, stunt it with me, give it to me & you have a video series and I finally get my bike ;)
Awesome video guys👍🏼 Don’t suppose you could tell how much the total cost of the bike was, with the extra bits & upgrades and including the purchase of the bike?
Ostakaa Suzuki pv projektiksi ja tehkää siitä stunttimopo ja kattokaa kuinka lujaa viilaamalla 50cc:tä pääsee ja tehkää siihen vaikka semmonen hainsuu sotamaalaus tankkiin tai ihs
For a project : do mods on CRF 50 with BBR Motosport pieces...new supsension, big bore kit 106cc strocked, manual transmission, skidplate and more more more more......!!!! I have have CRF 50 2006 since I was young and my dream for the futur is to build a super fast pit bike with my CRF 50.
Can i ask some stupid question ? If i buy a exc 125 with enduro wheels and i wanna use it like a supermoto its will be enough to put street wheels on it or i need to do some more modificaction ?
Dude could the 250 ktm arm fit 4.5 inch rims and 160/60 tires? Mine is 3.5 inches with 130/70 metzeler tire. Quite close to the tire lips now the chain.
Ever heard of a Aerodyne variable vane turbo? I am under the impression they boost almost 12 psi at like 1500 rpm, they make kits for utv's and atv's, I always daydreamed of putting one my 680ccXR or two on my 996cc VTR... please do turbo the balls off something (preferably sumo) above 500cc!
No jep toi teippi on ihan vitun hirveetä sydämmeen sattuu ku tietää että joillaki ei oo ees varaa ostaa ku joku cbr mikä maksaa sen 500 ja nuo raiskaa noita bränikkä kotareita kyllä pitäis moni parempaa huolta tommosesta ei ole edes oma mielipide yksinkertasesti vaan ruma tuli
In my days, you had to do 1000 kms before start pushing the bike...these guys are doing burnouts with a sparkling new engine!! Don't these new bikes also require the typical engine breaking procedure?
They get broken in in the factory with Dyno runs pushing every single engine to its limits for 2-3 minutes straight. Sure, back in the days these procedures were absolutely needed, nowadays, not so much except for 2 early oil changes tho (specific to this bike)
What about suspension ??? You need to change from Enduro to Supermoto setting specs .........you dont just change wheels and brakes and it's a SM !!!!! you should go all way. And after spending so much money , get a SM front fender too.
![จบจนได้ ! | Black Myth: Wukong #007 [ตอนจบ?]](http://i.ytimg.com/vi/DSqvWndF0sw/mqdefault.jpg)
Make a 50cc go as fast as possible
Alex Jansson yes!!
Jeremy S. But it isnt 50cc anymore
It's gonna blow up LUL
We have been thinking about this. How much you can rip out from 50cc engine.
Juu koittakaa saada 50cc koneesta niin paljon irti kun vaan pystyy se ois siisti nähä
PLEASE KEEP POSTING VIDEOS LIKE THIS PLEASEEEEE!!YOU GUUYS ARE THE BEST,AND IM LOVING THE VIDEOS!
Thanks man :)
Stunt Freaks Team where do i get this Frontbrake radial/axial Adapter?
Do a yamaha dt project
Only missing a skid plate and a orange chain now. My old 530 six days had a black plastic skid plate, and i think that made it look so much better.
Tehkää 50cc projekti
Do more build videos
What a machine, it looks beautiful!!!! Congratulations 😎😎
tehkää mahollisimman viritetty 50cc ja koittakaa saaha sillä 130kmh lasii ;D
Kallilexa paska idea
turboahdettu mersu Koska? Perustele vähän miksi tämä on mielestäsi huono idea, ettet vaikuttaisi ihan idiootilta.
SALA SANA perus derbi ilman rajotinta, kureja + oikeen säädetty sytkä ja kaasari nii kulkee jo 90kmh
Sakari M vitut kulje😂 ehkä voi vakio mittari noin väittää
Eetu Tamminen 11kk vanha mut kulkee ainaki jos on rajoittamaton cdi ja tehari
Put fmf, yoshimura or akrapovic exhaust on this bike for a great sound !
Do an aprilia sxv 550 project. That's one insane bike
Ktm is best
Thelaku13 yeah would be nice to see an aprilia project
50cc project
Juusto joo ois kyl mahtavaa jos tekis 50cc derbistä sellasen joka kulkis 100
Juusto Yamaha dt 50 is Nice bike for project
mee töihi
Juusto Aprilia Sx 50 2008
Suzuki PV50
A real SUPERMOTO BIKE 2T 450 c.c UFFFF!!! my dream bike!... BEAUTIFUL!! Congratulations!!..👍👌
Shouldn’t you break it in before doing any burnouts?
You break it in by doing burnouts
umm its a machine you do have to break it in but its your choice how you do it.
I seen a video saying riding it really easy for a break in is actually not too great for it a hard break in is better
''In Finland we have this thing called: vitusti kaasua ja kytkin ylös.''
+pertti peräreikä yes you do have to break it in
Ihan helvetin nätti! Tollasen kun omistais nii johan alkais tulee videoo
I'd like to see a Husqvarna TE 449 just because it's a very uncommon husky that almost nobody knows about and maby underestimates when seeing.. Love your work!
Husqvarna TC 449 project. Loved the thing more than my SM510R or the KTM 450.
Me gusto mucho el video, ese cambio le quedo perfecto a la moto, quedo hermosa! Wtf!!
Project idea: fly me in the the shop, go choose a bike with me, customize it with me, stunt it with me, give it to me & you have a video series and I finally get my bike ;)
Are you idiot or idiot
@@allu2007 yes
Awesome video guys👍🏼
Don’t suppose you could tell how much the total cost of the bike was, with the extra bits & upgrades and including the purchase of the bike?
Beautiful!! I wish I had the money for that, that's a pretty trick bike!! :)
Dam that is one bad ass bike. Only in my dreams. Maybe a build on making a super moto street legal
tehkää joku video siitä 450 peeveestä
Rakentakaa stuntti mönkijä
Can you do a 50cc project on the Cpi sx 50
Nice broooo
Can you do a Video from the lefthandbrake and the adapter plate (2:38) how you build it and al things from the lefthandbrake ? 👍👍👍
Hyvää jälkee vmx, etujarrun väliin pitää pistää prikkoja ettei ota levyyn kiinni
vittu mitä sitte ja vmx on parasta laatua
Mopo projekti!!
You Antti Leppänen needs to do more daily vlogs because those videos are good!
Ostakaa Suzuki pv projektiksi ja tehkää siitä stunttimopo ja kattokaa kuinka lujaa viilaamalla 50cc:tä pääsee ja tehkää siihen vaikka semmonen hainsuu sotamaalaus tankkiin tai ihs
Very nice vid a cool projekt woud be to buy any vespa and do a dirtbike makeover with the vespa keep on making videos!
What about the foot bracket in the back? Are you guys gonna show a video how to make it? If it doesn't have one to mount on
0:16 great sound... woooho
Oh god, i hope can have one of this. Beautiful bike
AI onks tää se Stenbergin kotari?
mankiracing on
Tehkää kevareista lisää testivideoita
Hi boys i am from Portugal, can you please show all your bikes and instalations and stuf? Continue with the good work!
how does the 450 exc-f compare to a 500 exc-f ( power/top speed/gearing ratio/suspension)
Thanks =)
tehkää minicrossista mönkiä ja laittakaa siihen Turbo ni sit on jetoja
Minicrossiin turbo 😁 ei taitais oikei tulla mittää haha
Stunt Freaks Team kyllä tulee kuha on oikee tekijä, vidoita löytyt youtubesta ku croaseihi on laitettu turbo!
Do a Moped tuning projekt like a Derbi senda or a beta. I wanna see some 2stroke power ;)
Que elegante me gusta me dio en el corazón 👍
Hey, I have an idea!! I'd like to see the front fork oil changed...can you post that??
For a project : do mods on CRF 50 with BBR Motosport pieces...new supsension, big bore kit 106cc strocked, manual transmission, skidplate and more more more more......!!!! I have have CRF 50 2006 since I was young and my dream for the futur is to build a super fast pit bike with my CRF 50.
Try can you use rear sprocket as a saw blade
Anyone know what the song is from 5:20? its so freaking good, I need it in my life
darude sandstorm
Love your channel by the way!!!!!!!!!!!
I have one question do you must change break's when you put motard wheels
Thanks for answering
Can i ask some stupid question ? If i buy a exc 125 with enduro wheels and i wanna use it like a supermoto its will be enough to put street wheels on it or i need to do some more modificaction ?
Should a Suzuki gsxr 750 project whould be sick !
does somebody know the name of the song 6:11
Daurde - sandstorm
bro i spent hours searching and here it is
th-cam.com/video/R6nsUf3ENzs/w-d-xo.html
ur welcome
oh thank you dude ;D
@@angus4670 do you know is that song in spotify
nah man only ever found it on youtube, sucks hey
Very Good video. Ja Ihan saakelin hieno kotari👍😎
Looks soo awesome
Pls make a exc 125 in white blue ore green black
@stuntfreaksteam Did you guys use te stock brake hose with the VMX caliper?
these projects are fucking class to watch come together!! ye should have way more subs wtf youtube
Can you guys do stunt atv?
Mr_Aatu atvs are gay
Rotta Nikondr How vehicles can be gays?
Dude could the 250 ktm arm fit 4.5 inch rims and 160/60 tires? Mine is 3.5 inches with 130/70 metzeler tire. Quite close to the tire lips now the chain.
How much money was spend for the project??? i want to make one project of those, but i dont know how much money
Wow nice accessories... Do you have any Xtra accessories???
2:36 you guys doesn’t have a stunsbrake adapter spare over? I tried to build one but didn’t work…
Look from thebrapshop.com
Gracias su programa es muy bueno 🇨🇴
Ever heard of a Aerodyne variable vane turbo? I am under the impression they boost almost 12 psi at like 1500 rpm, they make kits for utv's and atv's, I always daydreamed of putting one my 680ccXR or two on my 996cc VTR... please do turbo the balls off something (preferably sumo) above 500cc!
hi guys, im going to buy a new bike soon. It`s going to be a KTM EXC 125cc!! Im so excited :)
Please give us a link to buy these brake calipers and brake levers.
Can you guys please make Suzuki PV projekt?❤️
Do reviews on products you use on these builds.
can you put the list of all accessories that you put on thit bike please ? thank you
Do daily vloggs
Vaihtakaa kotariin fmf kokoputkisto👍
We spend too much money on defense. Good hope you learned your lesson
Millo Antin kolmisatkust videoo??
Vkl kuvaan 😍
Tehkää joku ikuisuusprojekti ni tulee videoo esim uus krosskartti
Se vanhakin on jo ikuisuusprojekti siitä pitäs kyl ny tulla videoi
Stunt Freaks Team jes, koska tulee?
how much is this build cost? looks expensive as hell, i'm broke by only watching this video. nice bike :)
What are the front and rear size of the supermoto wheels? 3.50 front and 4.50 rear?
Looks sick but needs a black chain, or gold
Rip kaunis vakio kooteeäm. sitten se pilattiin tarroilla...
Jaketus jep
Älä inise jossei oo rahaa ostaa kotarii saatikka päälle tarroja.
No jep toi teippi on ihan vitun hirveetä sydämmeen sattuu ku tietää että joillaki ei oo ees varaa ostaa ku joku cbr mikä maksaa sen 500 ja nuo raiskaa noita bränikkä kotareita kyllä pitäis moni parempaa huolta tommosesta ei ole edes oma mielipide yksinkertasesti vaan ruma tuli
Sateenliitin Ajaa kovaa sen teipin voi aina ottaa pois ja se myös suojaa naarmuilta melko hyvin niistä kohtii missä sitä on
Sateenliitin Ajaa kovaa nii sitku se husse ois viel oma eikä naapurin
May I know where you bought all this motocross to motard conversion kit? Can you send me the link of the possible site?
What’s better ktm 450 or 500 for motard ? Il need the exc as want to ride on road
In my days, you had to do 1000 kms before start pushing the bike...these guys are doing burnouts with a sparkling new engine!! Don't these new bikes also require the typical engine breaking procedure?
They get broken in in the factory with Dyno runs pushing every single engine to its limits for 2-3 minutes straight. Sure, back in the days these procedures were absolutely needed, nowadays, not so much except for 2 early oil changes tho (specific to this bike)
Do you have a link to ALL the parts used for this build in English ?
the tires are big a little bang
I really want one of those bikes
where did you guys get the stickers for the plastics (not the sft one)
What was the overall price of this project including the bike not included labor
Pls build a gokart with like a V2 Engine from a motorbike in it, or an drifttrike
Nice orange oil cap.
crf250l project. wondering about how you gonna fix front brakes
Vitsi jos ois rahea ostaa 450 18
I want you to make me change the supermoto wheel, but although I am passionate about supermoto, I don't know what to do
very very awesome .. good job broo 👍
Good lookin' bike bro...
But hey, is that Milwaukee (your cordless)
Not a fan of those graphics but apart from that the bike looks fucking dope.
Why are you putting super good suspension on a supermoto
How much did this project cost?
Great work. Go ahead.
Whats song?
I like most your videos. But i havent motorbike 😥
What about suspension ??? You need to change from Enduro to Supermoto setting specs .........you dont just change wheels and brakes and it's a SM !!!!! you should go all way. And after spending so much money , get a SM front fender too.
Tehkää 50cc moottorilla oleva mopo esim. Manki tai joku ja virittäkää siitä stuntti mopo
Were is the Handbrake Adapter from?
52 sprocked rear , and what is sprocked front ? 14
Jos haluutte tyhmän projektin nii tehkää maailman nopein supermoto!