Only thing I would do different is, I would leave my microphone hooked up to the back of the controller leave my headphones hooked up to the controller put my RCA‘s from the main out to the other RCA’s on this device. I’m still not understanding where the rest of these cords go, I have an android that I do my live streams with I went back over your video several times and try to figure out how to set the switches on this so the gain goes on 8 the 🎤 ist is at 10 looks like the head phone dial is at 10 so the switches and dials that you showed us going from left to right we have 1010 8 and 0 now if you would send a response back on how to set the other side unless there’s no switches on that side that would be great
my question is when you are streaming a live dj set let’s say on tik tok and you’re hooked up to the irig stream pro is the music going into tik tok if u don’t want to use speakers and can you mix in the headphones as well? ik it’s a long question but i’m confused.
Hello sir, Do you need to use an additional soundcard so that the audio results get better, I just bought Irig stream pro 1 month ago but I feel that the low is not too big and the audio sound is not as good as my friend who uses a soundcard at the same price as Irig stream pro. May I ask your opinion on this matter
Hi ! Thank you for your video. I have a ddj flx 4 that I connect to a JBL 110 with the rca cable to an aux-in 3.5. I then want to plug the aux-out of a 3.5 male to rca and then to the Irig but I get no signal. Any idea why ?
I. go straight from the controller to the irig and use the 3.5 from the irig headphone output to your JBL. Then connect the 2nd jbl from the aux out of the first JBL. Then the irig lightning cable out to my iPhone. Hope that helps.
Hey thanks man. As always simple and informative. Right now I have a super ghetto fabulous setup with the USB going from controller into an HP i5 running Serato Lite laptop and then running a split cable from headphone jack on the laptop into powered Alesis M1Active studio monitors. Could you recommend a pocket friendly solution to increase sound quality and eliminate some of the lag I experience when playing very "busy" tracks together, if that makes sense. Also, would placing the speakers further from the laptop and controller help with that issue? Thanks again. Much love!
Hello Dima. As always thank you for watching and commenting. Are you getting lag into the laptop, like you’re video recording or live stream or just to your speakers? It sounds like it would be your laptop processor giving the lag. Serato tends to gear their software towards Mac even from the beginning days just due to variants of windows built machines, their specific company’s parts manufacturers,their ecosystems and inconsistent build qualities. The first thing I’d look at would be to make sure you have the current version of Serato Lite. Latest OS on your HP. Get a good usb cable with a ferrite choke on both ends to help eliminate any signal interference. Make sure your gear is grounded from the wall power supply. Bad grounding can cause a host of problems all on its own. Check your y plug and speakers cables to make sure they are TRS not TRRS.
@@idjchance thank you so much, dude! I do have the latest software version. I have never heard of a ferrite choke before so I'm going to look into that for sure. The other thing is I think I need to play around with my laptop settings and optimize everything for performance because I think anything less than that is what's causing the lag. Basically, if I'm in the mix and I apply effects like echo or reverb at high level/depth, the music sounds like there's a bottle neck or something where the sound gets distorted and almost sounds like an old cassette tape where the ribbon would get twisted. I absolutely love this little controller. It's so much fun!
Hey great video chance! I recently bought a irig stream to record my dj sets but I’m running into a problem with the annoying static sounds in my recordings. I was just wondering if you ever dealt with that with yours and how would you go about troubleshooting that issue. (I have no issues with sound clarity when it comes to connecting my ddj 400 directly to the speaker) Thanks and happy holidays!
Hi special K. Thanks for the question and the watch. I seem to get static electricity, depending on where I am recording. So places have bad grounding or some kind of RF interference. I was able to overcome it by using a cloud lifter for my microphone and also plugging my power supply directly into my Furman voltage regulator. Tripplite also has voltage regulators but I’ve found the Furmans to be better and more consistent in all aspects.
How is the sound quality of podmic through this sound card going to the live stream? Is it crisp like radio mic? If not how we can make it that way? Thank in advance.
It’s good on its own for a quick remote but I found that it’s better with a cloud lifter. I go Podmic into cloud lifter then into irig stream. Or if I’m using multiple mics, I plug everything into the rodecaster pro then the irig stream
Great video but I have a question. I got the iRig stream and I need to create Instagram Reels in Stereo via the Instagram app on an iPhone but after trying many times with different cords etc. I am only getting a mono signal recorded to the reel with the iRig Stream. The same this happens when doing a remix on instagram in the app, recorded in mono. Is this correct or am I doing something wrong or should I just go for the Pro version and will it record with the Instagram app on and iPhone in stereo?
Yeah IK has said on their website that Instagram converts and uploads to mono. No idea why. I hope that changes. Thanks for the watch and comment dream.
Chance is the best dude to explain anything really. He's got a way of making it make sense without getting too tech but at the same time you really learn the ins and outs of whatever piece of hardware he is reviewing. Chance, I would consider a subscription to a service where you teach courses bro.
@@DeemMalicious I’ve been wanting to do more stuff like that or doing a weekly livestream and have no idea how to do it. It’s just me learning as I go..
If you need to put out more than one mic and your rev1, you shouldn’t need a sound mixer. The irig stream pro is basically a sound mixer since you can do 2 mics and the rca inputs. If you do use a mixing board plug everything into that then the output of the board should go to the input on the irig and then the irig into your device. Thanks for the comment and the watch.
Hi Sandra. Thanks for the watch and comment. I go from the Rev1 into the rca inputs on the Irig the irig into the phone and speakers are connected to the headphone jack output.
I wish you would have included in your video how to set every switch or every dial on this black box because there is a lot can I get a response back on how to set the switches and dials on this device? The only thing I know so far from watching your video is I know that my RCA mains on the back of my controller the main out go into the RCA’s in this device but that’s all I know I’m coming from the rig 2 Being a tech guy is not my strong suit now when it comes to sound that’s where I excel thank you sir for your time thank you for the video but just send a response back on how I set the switches and dials on this device thank you
@@marcgregory8834 it was a $40 option and it’s helped many times www.sweetwater.com/store/detail/iRigPSU3A--ik-multimedia-irig-pro-keys-i-o-power-adapter?mrkgadid=&mrkgcl=28&mrkgen=&mrkgbflag=&mrkgcat=&acctid=21700000001645388&dskeywordid=92700080454169719&lid=92700080454169719&ds_s_kwgid=58700008743176688&ds_s_inventory_feed_id=97700000007215323&dsproductgroupid=2340625149274&product_id=iRigPSU3A&prodctry=US&prodlang=en&channel=online&storeid=&device=m&network=g&matchtype=&adpos=largenumber&locationid=9057239&creative=705256640089&targetid=pla-2340625149274&campaignid=21453452330&awsearchcpc=1&gad_source=1&gclid=CjwKCAjw2dG1BhB4EiwA998cqHSUgXF6GcDYUf8VfQjXzkdcU_R5JU_u7WRwz8lF8W3J4lZG_VZXgBoCE20QAvD_BwE&gclsrc=aw.ds
This didn't work for me. I tried plugging this into my Focusrite Scarlett 2i2 audio interface, which is plugged into my Roland TD-17 V drums kit for live streaming. I run that into a DAW and usually just recorded midi drums for covers. Now I wanna live stream and bought a dual 1/4" to RCA cable that runs into my Scarlett from the iRig Stream Pro. That is connected to my phone, which is my camera via Aux to usb c cable. The mic I use is a condenser mic that came with my Focusrite Scarlett 2i2. Initially, I had it plugged into the iRig Stream Pro, but was told by a friend to try plugging it into my Focusrite Scarlett 2i2 audio interface. I still have no signal or any clue as to how it works or how to set up my live stream for drumming to song requests and whatnot. Help?
Hey drummer. I’ve never used a DAW or electronic drums so I can’t offer any insight there. The way I have everything hooked up is everything audio (dj gear and microphone) goes into my Rodecaster Pro mixer. Then the rodecaster pro RCA output into the Irig. Then the Irig to the iPhone video recording through the lightning cable.
I have an android S20 5G ultra and when I use the irig stream on Tik Tok, on live streams it doesn't have bass but it only has treble when I stream can you help me out
I have no idea. I’ve always used Apple and it just worked when I plugged in to any iPhone 8 and up. I know the s20 is pretty popular if you find an answer please share it so it can help others that may be going through a similar issue.
Is anyone getting a high pitched sound. Why is it doing that . I have a Droid (Galaxy ultra 22 ) all I'm getting on the output is high pitch white noise
Hi is there a way to use the stream pro to stream a live dj set on phone using DJ controller and having your master speaker plugged into it so I'm not restricted to only DJing in headphones ?
Ok I live in a flat /apartment with 5 other family so I want to live stream till later in the night but the system I am using is too loud so someone told me if I used this I can eliminate the sound and live from from my mixer laptop straight to Facebook without making loud sound in the middle of the night.
@@rickybritish ok so from what you’re saying it seems like you would need another set of headphones to have plugged into the irig stream pro in place of speakers. Or you can constantly unplug your headphones from your mixer to the irig and back. Also you can have your livestream play through your laptop speakers (there will be a noticeable delay from those). That’s in the serato dj pro settings. You click on “allow other apps to use serato” however that’s worded. Let me know if that helps.
@@ckrissckross7361 serato dj pro? You should just be able to double click it and it should open. You could right click on the folder and click open too.
@idjchance I opened it but it's saying file can't be opened need windows update version .. but I did update and still won't open, u think it's my laptop? I have a Samsung galaxy book go 5g
@@ckrissckross7361 I absolutely think it’s windows. There are always more problems with them than a Mac. It’s the main OS I get get complaint about. It’s what has kept me using Mac since 09’. Here’s the page from pioneer that may have the information on what windows OS you should have. www.pioneerdj.com/en/support/software-information/controller/ddj-rev1/ I know macs can be expensive but for a great value that can get the job done reliably you should try getting a Mid 2012 with the i7 quad processor for 2-300 as a base model. You can always upgrade the ram and hard drives later. It’s my main laptop for gigs even though I have a brand new MacBook. I know this guy usually has lots of mbp facebook.com/djab203?mibextid=LQQJ4d
![[Eng Sub] IK Multimedia iRig-Stream audio interface (for streams and podcasts)](http://i.ytimg.com/vi/pM1eskddaWo/mqdefault.jpg)
![[Eng Sub] IK Multimedia iRig-Stream audio interface (for streams and podcasts)](/img/tr.png)
FMF Corpsman here.... the green side joke was so slick!
Only thing I would do different is, I would leave my microphone hooked up to the back of the controller leave my headphones hooked up to the controller put my RCA‘s from the main out to the other RCA’s on this device. I’m still not understanding where the rest of these cords go, I have an android that I do my live streams with I went back over your video several times and try to figure out how to set the switches on this so the gain goes on 8 the 🎤 ist is at 10 looks like the head phone dial is at 10 so the switches and dials that you showed us going from left to right we have 1010 8 and 0 now if you would send a response back on how to set the other side unless there’s no switches on that side that would be great
or can you make a video about what all you need to start djing
I think this peace will be good to connect an iPhone to a mixer for playing music as a backup.
Great video. Thank you for the info. I just got my iRig stream Pro today. How did you get the Pop made of yourself?
my question is when you are streaming a live dj set let’s say on tik tok and you’re hooked up to the irig stream pro is the music going into tik tok if u don’t want to use speakers and can you mix in the headphones as well? ik it’s a long question but i’m confused.
Hello sir, Do you need to use an additional soundcard so that the audio results get better, I just bought Irig stream pro 1 month ago but I feel that the low is not too big and the audio sound is not as good as my friend who uses a soundcard at the same price as Irig stream pro.
May I ask your opinion on this matter
Hi ! Thank you for your video. I have a ddj flx 4 that I connect to a JBL 110 with the rca cable to an aux-in 3.5. I then want to plug the aux-out of a 3.5 male to rca and then to the Irig but I get no signal. Any idea why ?
I. go straight from the controller to the irig and use the 3.5 from the irig headphone output to your JBL. Then connect the 2nd jbl from the aux out of the first JBL. Then the irig lightning cable out to my iPhone. Hope that helps.
Hey thanks man. As always simple and informative.
Right now I have a super ghetto fabulous setup with the USB going from controller into an HP i5 running Serato Lite laptop and then running a split cable from headphone jack on the laptop into powered Alesis M1Active studio monitors. Could you recommend a pocket friendly solution to increase sound quality and eliminate some of the lag I experience when playing very "busy" tracks together, if that makes sense. Also, would placing the speakers further from the laptop and controller help with that issue? Thanks again. Much love!
Hello Dima. As always thank you for watching and commenting. Are you getting lag into the laptop, like you’re video recording or live stream or just to your speakers?
It sounds like it would be your laptop processor giving the lag. Serato tends to gear their software towards Mac even from the beginning days just due to variants of windows built machines, their specific company’s parts manufacturers,their ecosystems and inconsistent build qualities.
The first thing I’d look at would be to make sure you have the current version of Serato Lite. Latest OS on your HP. Get a good usb cable with a ferrite choke on both ends to help eliminate any signal interference. Make sure your gear is grounded from the wall power supply. Bad grounding can cause a host of problems all on its own. Check your y plug and speakers cables to make sure they are TRS not TRRS.
@@idjchance thank you so much, dude! I do have the latest software version. I have never heard of a ferrite choke before so I'm going to look into that for sure. The other thing is I think I need to play around with my laptop settings and optimize everything for performance because I think anything less than that is what's causing the lag. Basically, if I'm in the mix and I apply effects like echo or reverb at high level/depth, the music sounds like there's a bottle neck or something where the sound gets distorted and almost sounds like an old cassette tape where the ribbon would get twisted. I absolutely love this little controller. It's so much fun!
@@DeemMalicious here’s the link from serato to optimize windows. support.serato.com/hc/en-us/articles/203057850-Optimization-Guide-for-Windows
@@idjchance nice! Thank you so much! I appreciate all your help.
@@DeemMalicious I’m happy to help. Let me know how it goes.
Hey great video chance! I recently bought a irig stream to record my dj sets but I’m running into a problem with the annoying static sounds in my recordings. I was just wondering if you ever dealt with that with yours and how would you go about troubleshooting that issue. (I have no issues with sound clarity when it comes to connecting my ddj 400 directly to the speaker) Thanks and happy holidays!
Hi special K. Thanks for the question and the watch. I seem to get static electricity, depending on where I am recording. So places have bad grounding or some kind of RF interference. I was able to overcome it by using a cloud lifter for my microphone and also plugging my power supply directly into my Furman voltage regulator. Tripplite also has voltage regulators but I’ve found the Furmans to be better and more consistent in all aspects.
@@idjchance Thank you for that insight! I will try that out
How is the sound quality of podmic through this sound card going to the live stream? Is it crisp like radio mic? If not how we can make it that way? Thank in advance.
It’s good on its own for a quick remote but I found that it’s better with a cloud lifter. I go Podmic into cloud lifter then into irig stream. Or if I’m using multiple mics, I plug everything into the rodecaster pro then the irig stream
Hi I just ordered one to used to live stream on Facebook music from my living room so someone told me I don’t need to turn up my music
Great video but I have a question. I got the iRig stream and I need to create Instagram Reels in Stereo via the Instagram app on an iPhone but after trying many times with different cords etc. I am only getting a mono signal recorded to the reel with the iRig Stream. The same this happens when doing a remix on instagram in the app, recorded in mono. Is this correct or am I doing something wrong or should I just go for the Pro version and will it record with the Instagram app on and iPhone in stereo?
Yeah IK has said on their website that Instagram converts and uploads to mono. No idea why. I hope that changes. Thanks for the watch and comment dream.
@@idjchance Thanks for your help!
is there anyway i can talk to you directly, i want to get into djing i just don’t know what all i need to start up
Sure. Happy to help. You can DM me on IG @idjchance. Hopefully I can help.
Chance is the best dude to explain anything really. He's got a way of making it make sense without getting too tech but at the same time you really learn the ins and outs of whatever piece of hardware he is reviewing. Chance, I would consider a subscription to a service where you teach courses bro.
@@DeemMalicious I’ve been wanting to do more stuff like that or doing a weekly livestream and have no idea how to do it. It’s just me learning as I go..
To go live on like tik tok would i need an iRig and a sound mixer? Got an irig stream, rev 1 controller and iphone still tryna figure it all out
If you need to put out more than one mic and your rev1, you shouldn’t need a sound mixer. The irig stream pro is basically a sound mixer since you can do 2 mics and the rca inputs. If you do use a mixing board plug everything into that then the output of the board should go to the input on the irig and then the irig into your device.
Thanks for the comment and the watch.
How did you connect your irig stream to your Rev 1?
I currently have my KRK connected into the mixer.
Hi Sandra. Thanks for the watch and comment. I go from the Rev1 into the rca inputs on the Irig the irig into the phone and speakers are connected to the headphone jack output.
@@idjchance Thanks so much for the quick response!
@@TaptheSoul happy to help
How to eliminate the noise? Its a problem from rca or xlr cable or the data cable from irig to gadget?
I haven’t experienced any noise issues so far. A cloud lifter may help with the mic noise you’re getting. Is your entire system grounded?
I wish you would have included in your video how to set every switch or every dial on this black box because there is a lot can I get a response back on how to set the switches and dials on this device? The only thing I know so far from watching your video is I know that my RCA mains on the back of my controller the main out go into the RCA’s in this device but that’s all I know I’m coming from the rig 2 Being a tech guy is not my strong suit now when it comes to sound that’s where I excel thank you sir for your time thank you for the video but just send a response back on how I set the switches and dials on this device thank you
What charger do you need to charge phone while streaming?
@@marcgregory8834 it was a $40 option and it’s helped many times
www.sweetwater.com/store/detail/iRigPSU3A--ik-multimedia-irig-pro-keys-i-o-power-adapter?mrkgadid=&mrkgcl=28&mrkgen=&mrkgbflag=&mrkgcat=&acctid=21700000001645388&dskeywordid=92700080454169719&lid=92700080454169719&ds_s_kwgid=58700008743176688&ds_s_inventory_feed_id=97700000007215323&dsproductgroupid=2340625149274&product_id=iRigPSU3A&prodctry=US&prodlang=en&channel=online&storeid=&device=m&network=g&matchtype=&adpos=largenumber&locationid=9057239&creative=705256640089&targetid=pla-2340625149274&campaignid=21453452330&awsearchcpc=1&gad_source=1&gclid=CjwKCAjw2dG1BhB4EiwA998cqHSUgXF6GcDYUf8VfQjXzkdcU_R5JU_u7WRwz8lF8W3J4lZG_VZXgBoCE20QAvD_BwE&gclsrc=aw.ds
This didn't work for me. I tried plugging this into my Focusrite Scarlett 2i2 audio interface, which is plugged into my Roland TD-17 V drums kit for live streaming. I run that into a DAW and usually just recorded midi drums for covers. Now I wanna live stream and bought a dual 1/4" to RCA cable that runs into my Scarlett from the iRig Stream Pro. That is connected to my phone, which is my camera via Aux to usb c cable. The mic I use is a condenser mic that came with my Focusrite Scarlett 2i2. Initially, I had it plugged into the iRig Stream Pro, but was told by a friend to try plugging it into my Focusrite Scarlett 2i2 audio interface. I still have no signal or any clue as to how it works or how to set up my live stream for drumming to song requests and whatnot.
Help?
Hey drummer. I’ve never used a DAW or electronic drums so I can’t offer any insight there. The way I have everything hooked up is everything audio (dj gear and microphone) goes into my Rodecaster Pro mixer.
Then the rodecaster pro RCA output into the Irig.
Then the Irig to the iPhone video recording through the lightning cable.
@@idjchance Hey DJ Chance, thanks so much for responding! I actually figured it out after reading through the instructions manual 😅 🤷🏻
@@drylakedrummer I’m glad you were able to figure it out. Now if I ever get sophisticated enough to try a DAW, I’ll ask you.
I appreciate the watch
@@idjchance Yup, anytime! Thanks again for everything. 🫡
I have an android S20 5G ultra and when I use the irig stream on Tik Tok, on live streams it doesn't have bass but it only has treble when I stream can you help me out
I have no idea. I’ve always used Apple and it just worked when I plugged in to any iPhone 8 and up. I know the s20 is pretty popular if you find an answer please share it so it can help others that may be going through a similar issue.
Is anyone getting a high pitched sound. Why is it doing that . I have a Droid (Galaxy ultra 22 ) all I'm getting on the output is high pitch white noise
Hi is there a way to use the stream pro to stream a live dj set on phone using DJ controller and having your master speaker plugged into it so I'm not restricted to only DJing in headphones ?
Would just the IRig stream work for that as well ?
I always use the headphones plugged into the controller and the speaker is hooked into the headphone output of the irig
Can I connect this to my pc?
Hi AJ thanks for the comment and watching.
Yes. It has the necessary cables for USB , USB-C and Lightning.
Is that true
I’m unsure of your question
Ok I live in a flat /apartment with 5 other family so I want to live stream till later in the night but the system I am using is too loud so someone told me if I used this I can eliminate the sound and live from from my mixer laptop straight to Facebook without making loud sound in the middle of the night.
So I would only here the music through my earphones and on the live.
@@rickybritish ok so from what you’re saying it seems like you would need another set of headphones to have plugged into the irig stream pro in place of speakers. Or you can constantly unplug your headphones from your mixer to the irig and back.
Also you can have your livestream play through your laptop speakers (there will be a noticeable delay from those). That’s in the serato dj pro settings. You click on “allow other apps to use serato” however that’s worded.
Let me know if that helps.
Whats the best software to update for the serato ddj-rev1
I’m using the latest Serato DJ Pro 3.0.12 and Mac OS Ventura 13.5.2
@idjchance how do I open the file up I got it downloaded but doesn't open
@@ckrissckross7361 serato dj pro? You should just be able to double click it and it should open. You could right click on the folder and click open too.
@idjchance I opened it but it's saying file can't be opened need windows update version .. but I did update and still won't open, u think it's my laptop? I have a Samsung galaxy book go 5g
@@ckrissckross7361 I absolutely think it’s windows. There are always more problems with them than a Mac. It’s the main OS I get get complaint about. It’s what has kept me using Mac since 09’.
Here’s the page from pioneer that may have the information on what windows OS you should have. www.pioneerdj.com/en/support/software-information/controller/ddj-rev1/
I know macs can be expensive but for a great value that can get the job done reliably you should try getting a Mid 2012 with the i7 quad processor for 2-300 as a base model. You can always upgrade the ram and hard drives later. It’s my main laptop for gigs even though I have a brand new MacBook.
I know this guy usually has lots of mbp
facebook.com/djab203?mibextid=LQQJ4d