that forklift is making its money back fast for sure its making it so much easyer to get the things moved and its just great, great video thanks for sharing with us
Thank you for being part of the solution instead of being part of the problem,the majority of people are lazy they only want to complain and expect someone else to fix it,much respect to you sir.
@@ProjectShopFl forgot to include the forklift have a good day and be waiting for next adventure think you said the copper stator I think you one smart man you take your stuff and make it work for you if you needed to make a piece you did and adjusted it till it worked for you enjoy watching you tear shit up thanks for getting back to me
Ya so someone commented about adjusting that garage door all the way up I believe I would move that higher up a few slots on the list of priorities. Absolutely love the varying aspect ratio,accidental or not it’s very bold film production,avant gard,you only see this sort of work with the true visionaries the real pioneers of stage and screen. As a bonus it gives so many something to cry about,spiking the algos even further that way everyone gets to contribute to the channel😊 Steve is correct in the late 80s into the mid 90s when the Americans were becoming fatter,lazier and more compliant China was working diligently to build infrastructure for an entire nation. Our political leaders had sold us out by this time and we were perfectly fine with selling them all of our very finest materials which they melted down,the lesser quality materials and slag were then sent back to us again and we rebought these at Walmart for a significant markup while the Chinese grew into the super power we see today,100% China built an empire and the American public paid for it. I’m not real clear on exact scrap prices during that time but I do remember they were high as hell. I needed some sides in my truck so after a bit of research I went with the ‘Mike the Scavenger stake-bed’ model complete with tool and magnet holders and tie down anchors,plans are widely available on YT in every single one of his videos,mine are actually the version 1.0 he has since made several upgrades,the most significant imo as seen in the 3.0 version is he turned them around so you can actually stand on the side of the truck providing greater access to dumpsters as well as on-board scrap. I made mine out of rough sewn cedar #2 boards from the Amish mill,one old man working completely alone was able to complete the task in around 2 hours,your choice of materials could vary,I even used a scrap hog panel to fashion a shield to protect my rear window from mishaps.
man u have serious stripping machine.i have two but they are no compettion to urs,but they get the job done. i like ur style i have learned a lot from u brother...raythejunkman
Brother, as you know, Christmas is coming. We want to celebrate the joys of Christmas with each other. Some children also study in our church, but we do not have enough resources to celebrate the joys with each other. Please help us so that we can give gifts to the children and share the joys with each other. It is written in the word of God, give so that it may be given to you. May God bless you, your business, and your children greatly. Please help me.
Is that your scale wr had one at the feed store and i also used it to weigh a lady for a doctor's office cause she weighed over five hundred pounds then signed paperwork she took to doctor but the scale had to be state certified just saying picking up more stuff enjoy watching you make money glad forklift comes in handy for you all
Hard to watch the video with the weird aspect ratio. There seemed to be 3 or 4 different ones too. On my screen it is a little box with huge black bars on all 4 sides.
Hi from New Zealand, mlne has a black box, maybe two inches around the edge, I have around 83-87,% , the two vertical lines are a little thicker, that means I could be lying, but I'm not 😊
No to the borders. Don’t let the editor tell you this is a new trend. Most people watch on a phone, so if you put borders and make it smaller people will stop watching.
This is ok for Instagram videos, tok-tok and TH-cam shorts but unwatchable in the TH-cam player. On tv, phone and PC monitor it is a small square with black bars around.
Nice payout and that's a giant pile of transformers on the table. Nice work fellas.
you need to grease the vertical chains on the forklift, they are dry and will work a lot better when lube up good, Richard
that forklift is making its money back fast for sure its making it so much easyer to get the things moved and its just great, great video thanks for sharing with us
You should start putting things on pallets or cages for easier unloading with the forklift.
Great video! The black borders didn't bother me much, i enjojed it
Great looking stuff good video you are the best
For anyone wondering just double tap your phone screen and it will maximize to the proper ratio.
Thank you for being part of the solution instead of being part of the problem,the majority of people are lazy they only want to complain and expect someone else to fix it,much respect to you sir.
Should pin this to the top Derek, I just listen and watch while scrapping or wrenching so I didn't notice till partly through 😂.
Wire stripper best investment you made i think
👍👍👍
@@ProjectShopFl forgot to include the forklift have a good day and be waiting for next adventure think you said the copper stator I think you one smart man you take your stuff and make it work for you if you needed to make a piece you did and adjusted it till it worked for you enjoy watching you tear shit up thanks for getting back to me
Ya so someone commented about adjusting that garage door all the way up I believe I would move that higher up a few slots on the list of priorities. Absolutely love the varying aspect ratio,accidental or not it’s very bold film production,avant gard,you only see this sort of work with the true visionaries the real pioneers of stage and screen. As a bonus it gives so many something to cry about,spiking the algos even further that way everyone gets to contribute to the channel😊 Steve is correct in the late 80s into the mid 90s when the Americans were becoming fatter,lazier and more compliant China was working diligently to build infrastructure for an entire nation. Our political leaders had sold us out by this time and we were perfectly fine with selling them all of our very finest materials which they melted down,the lesser quality materials and slag were then sent back to us again and we rebought these at Walmart for a significant markup while the Chinese grew into the super power we see today,100% China built an empire and the American public paid for it. I’m not real clear on exact scrap prices during that time but I do remember they were high as hell. I needed some sides in my truck so after a bit of research I went with the ‘Mike the Scavenger stake-bed’ model complete with tool and magnet holders and tie down anchors,plans are widely available on YT in every single one of his videos,mine are actually the version 1.0 he has since made several upgrades,the most significant imo as seen in the 3.0 version is he turned them around so you can actually stand on the side of the truck providing greater access to dumpsters as well as on-board scrap. I made mine out of rough sewn cedar #2 boards from the Amish mill,one old man working completely alone was able to complete the task in around 2 hours,your choice of materials could vary,I even used a scrap hog panel to fashion a shield to protect my rear window from mishaps.
man u have serious stripping machine.i have two but they are no compettion to urs,but they get the job done. i like ur style i have learned a lot from u brother...raythejunkman
Brother, as you know, Christmas is coming. We want to celebrate the joys of Christmas with each other. Some children also study in our church, but we do not have enough resources to celebrate the joys with each other. Please help us so that we can give gifts to the children and share the joys with each other. It is written in the word of God, give so that it may be given to you. May God bless you, your business, and your children greatly. Please help me.
Is that your scale wr had one at the feed store and i also used it to weigh a lady for a doctor's office cause she weighed over five hundred pounds then signed paperwork she took to doctor but the scale had to be state certified just saying picking up more stuff enjoy watching you make money glad forklift comes in handy for you all
What industries or companys are ur customers based from?? I really would like to start something like this in my town for myelf..
Don't sell someone else your boards. You're just giving someone else your money.
Hard to watch the video with the weird aspect ratio. There seemed to be 3 or 4 different ones too. On my screen it is a little box with huge black bars on all 4 sides.
Somehow I accidentally changed the setting on the camera.
Hi from New Zealand, mlne has a black box, maybe two inches around the edge, I have around 83-87,% , the two vertical lines are a little thicker, that means I could be lying, but I'm not 😊
Agreed but on youtube you can just zoom in and make it fit your phone
U get what u pay 4
i think you set the aspect ratio to 4:3 or something
How long does it take you to drive to the Miami yard?
Across the state from gulf coast side to the Atlantic
did you decide not to do merch, I don't see an option on your profile
No to the borders. Don’t let the editor tell you this is a new trend. Most people watch on a phone, so if you put borders and make it smaller people will stop watching.
This is ok for Instagram videos, tok-tok and TH-cam shorts but unwatchable in the TH-cam player. On tv, phone and PC monitor it is a small square with black bars around.
I had the camera on the wrong setting I caught it later.
Enjoying the video but what’s up with the weird format, is it a TH-cam a thing?
He’s playing with different settings on the new go pro.
Steve remind me of Tommy Chong
get rid of the boarder, on laptop cant fill my screen
They should have paid you for cleaning up there yard. And the new format is bad.
I accidentally hanged a setting.