Great video Rylan i had to do this to my brand new 16 mag after first year in cooler weather the start would drag slow to turn over, took it out in the fall to find it full of rust and no lube on bearings cleaned up relubed and been great ever since.
Hi.. not model specific, but friends Vegas Jackpot.. , there are two bolts to bottom of starter.. and OIL came running out.. ie , the starter must have been flooded? with oil.. my though is that people keep way! over filling and oil blowing by shaft seal , hence oil going in and this is why starting issue.. can't imagine what the bottom end is having to splash through if I am right.. imho.. oil is to be checked with bike upright ,, not on side stand.. great to get your feedback. thanks
I took one of the bolts out of the bracket that holds the rectifier in place, when I removed that bolt from the starter oil started pouring out, I assume there is not suppose to be any oil in the starter? Lol
Many years rebuilding starters. Hitting the starter jogs the wore out brushes that fail to make contact with the armature in hopes that they move enough to make contact. The marks on the armature are from wore out bushings or bearings which greasing will not repair and eventually destroy the armature. If going that deep to remove starter just replace both bushing/ bearing.
I just wanted to ask about the area on the armature which contacts the brushes when fully installed. Back in the day when I worked in a foreign car repair shop we would take emery cloth to the commutator (the area on the armature) and make that are nice and shiny and then blow it off with compressed air. Very good video.
I'm attempting this currently. But I have a v92c and the exhaust is being extremely difficult to get off. Do you have to take off the chrome covers just to get them off? Thanks for posting this video Rylan!
Great video, Thanks. On my second replacement, would love to rebuild one, but one problem I'm running into is no part number listing for replacement bearings, bushings, etc. Could you possibly post a list of parts numbers you've found for rebuilding them?
I was surprised Rylan didn't say just replace them. After your comment I wondered if they were unavailable, If so now you need to buy a whole new strater. If you can remove them, bring them to a bearing dealer and they should be able to match them up. There is a great dealer where I live who has got me bearings I thought I would never get.. .....Otherwise take heed to what he says and as preventative maintenance go threw it every so often.
Hi Ryan, can you do a segment on CVT vs powercommander 5.. Have you used before? Instant EFI tuning does it work> ie. Cobra powerpro fi2000.. The tune shops would go broke , is that why they are saying dont use? Your thoughts on Victory tuning? with pipes and air torque tubes...
Thank you for this video..
Super helpful!
Good video, I'll save for future use
Hey Rylan! Thanks for the video. Great tip! I used to work in a truck shop and I was taught the same trick to rebuild big diesel starter motors.
Thanks Rylan for your great videos !
Awesome idea with the paper clips!
Great video Rylan i had to do this to my brand new 16 mag after first year in cooler weather the start would drag slow to turn over, took it out in the fall to find it full of rust and no lube on bearings cleaned up relubed and been great ever since.
Hi.. not model specific, but friends Vegas Jackpot.. , there are two bolts to bottom of starter.. and OIL came running out.. ie , the starter must have been flooded? with oil.. my though is that people keep way! over filling and oil blowing by shaft seal , hence oil going in and this is why starting issue.. can't imagine what the bottom end is having to splash through if I am right.. imho.. oil is to be checked with bike upright ,, not on side stand.. great to get your feedback. thanks
Awesome video, great suggestion with the paper clips. Really appreciate your help and advice on all things Victory related!
Keep it up Rylan! You're videos mean a lot to the Victory community.
1 hr. on my K, 5hrs. on my Cross Roads.
I took one of the bolts out of the bracket that holds the rectifier in place, when I removed that bolt from the starter oil started pouring out, I assume there is not suppose to be any oil in the starter? Lol
great tip as always. saving this for future maintenance . Thanks
Thanks man!! You save me some $$$!! Merry Christmas!!
Great attention to detail, Thanks
Starter clutch
Issues .
I need the puller for the rotor
Pro Vic advice is always appreciated ...thx
Ya, I need to get into my vision starter. Thanks Rylan!
Many years rebuilding starters. Hitting the starter jogs the wore out brushes that fail to make contact with the armature in hopes that they move enough to make contact. The marks on the armature are from wore out bushings or bearings which greasing will not repair and eventually destroy the armature. If going that deep to remove starter just replace both bushing/ bearing.
Is there a place that you can buy new brushes and the end seal that in on the end of the shaft with the bearing? 07 victory vegas 8-ball
Super good information and video, this will be shared on all vic forums, haaaaaa
I can't seem to find a rebuild kit. Any help would be appreciated
What should you grease up in the brush area?
I just wanted to ask about the area on the armature which contacts the brushes when fully installed. Back in the day when I worked in a foreign car repair shop we would take emery cloth to the commutator (the area on the armature) and make that are nice and shiny and then blow it off with compressed air. Very good video.
Another great video !
Thank u
Thanks. Nice video.
I'm attempting this currently. But I have a v92c and the exhaust is being extremely difficult to get off. Do you have to take off the chrome covers just to get them off? Thanks for posting this video Rylan!
Great video, Thanks. On my second replacement, would love to rebuild one, but one problem I'm running into is no part number listing for replacement bearings, bushings, etc. Could you possibly post a list of parts numbers you've found for rebuilding them?
I was surprised Rylan didn't say just replace them. After your comment I wondered if they were unavailable, If so now you need to buy a whole new strater. If you can remove them, bring them to a bearing dealer and they should be able to match them up. There is a great dealer where I live who has got me bearings I thought I would never get.. .....Otherwise take heed to what he says and as preventative maintenance go threw it every so often.
Hi Rylan can you help i have a 2010 Victory Jackpot 108, im trying to get a Mat black radiator guard / grill could you guys help
Cheers 👍
Hi Ryan, can you do a segment on CVT vs powercommander 5.. Have you used before? Instant EFI tuning does it work> ie. Cobra powerpro fi2000.. The tune shops would go broke , is that why they are saying dont use? Your thoughts on Victory tuning? with pipes and air torque tubes...
Hey Rylan, what is your email I need your help with 2000 vic v92c I purchased
Can I ship my 2001 v92c deluxe to you