Sir you just opened it up for me.... Have watched a few good videos now, but your simplistic way of this well known method seals the knowledge I have learnt up to now
@@SanjogSinnarkar if u'd like, maybe put "turn on subtitle" at title / first line of description instead of bottom, and perhaps in caps coz its so useful and a must see and i would have missed it if i didnt watch this video twice
I had seen the loomis method before but I didn't understand it, your video made me rethink my mistakes and learn the way you do it. Let's say that my main question was always "And how do you know where the inner circle goes..." obviously referring to the proportions of the face, but I think I need to study a little more in detail the human skeleton haha. Thank you very much!
My apologies for replying so late …Thanks a lot for commenting. After dividing the circle into 2 halves, divide the upper and lower half into 3 equal parts. So now, in total u have six equal parts. Now, extending the bottom line of the first and fifth part will give you the length of the oval (inner circle). One suggestion keep paper aside and make the markings as you read and follow the instructions point by point. Let me know in case of any confusion or any clarification. Thank you 😊
@@SanjogSinnarkar Oh I understand, then it is not necessary to start with the two circles, only with the reference lines and from there take the measurements of the circle, thank you very much I will try it now.
@@SanjogSinnarkarSe for possível, faça um vídeo desses passos, essa dúvida do tamanho do circulo interno sempre me deixou com problemas para saber se estava no tamanho correto, se bem que acho que entendi o que você escreveu, mas seria interessante um vídeo sobre o circulo interno, que eu acho que é mais difícil de acertar o tamanho correto para muita gente. Obrigado.
Great tutorial! It would be even better if you could fill in some of the missing details such how high is brow line, at what distance is the first curved line from the horizontal edge of the circle, etc. Thank you.
Hi, this is just about awesome ..I have a request, can you please explain on how to decide on size of the smaller inner circles and adjoining lines for eyes, lips and nose. Thanks a lot.
Thanks a lot After dividing the circle into 2 halves, divide the upper and lower half into 3 equal parts. So in total u have six equal parts. Now if u extend the bottom line of the first and fifth part will give you the length of the oval. One suggestion keep paper aside and make the markings as you read and follow the instructions point by point. Let me know in case of any confusion
Could you do one that with a head tilted more downwards? That is, so the eyeline is a little more downwards? Most of these are looking straight ahead or up, I feel like. These are really good btw!
Thank you. Here is the link Part 1 - th-cam.com/video/IECbyNuC6AA/w-d-xo.htmlsi=CvRf7g-mhqDqAx1g Part 3 - th-cam.com/video/zV58FBvrGt4/w-d-xo.htmlsi=xdL1ol7ll6jYTa9Z You may check check my playlist, there are other loomis videos as well.
After dividing the circle into 2 halves, divide the upper and lower half into 3 equal parts. So in total u have six equal parts. Now if u extend the bottom line of the first and fifth part then it will give you the length of the oval. One suggestion keep paper aside and make the markings as you read this and follow the instructions point by point, it will be much more clear. Let me know in case of any confusion
@@raghavnigam3287 mark 4 points vertically and horizontally with equal distance. Hold pencil lightly and try to draw circle touch those four marks. This way you can make sure its circle and not oval.
After dividing the circle into 2 halves, divide the upper and lower half into 3 equal parts. So in total u have six equal parts. Now, if u extend the bottom line of the first and fifth part will give you the length of the oval. One suggestion keep paper aside and make the markings as you read this and follow the instructions point by point. Hope this helps.
thank you so much you saved me because i draw everything so well except the face shape , thanks a lot !
You’re welcome and thanks thanks to you too for commenting 😊
Glad to know it helped you.
Sir you just opened it up for me.... Have watched a few good videos now, but your simplistic way of this well known method seals the knowledge I have learnt up to now
I am glad to know that it helped you. Thanks for commenting😊
1
Really Your Method is Very Good Loomis Sir So Heartly Thankful & Jai Jagannath Swami.....
Thank you. Clear structure step by step. And I like the music with it.
You’re welcome and thanks to you too for commenting 😊
Thank you for this wonderful tutorial! Appreciate your style
You're welcome and thanks to you too for commenting😊
Kiya ap merko sikha sekte ho
Your tutorial has helped me a lot. Thank you!
You are welcome and thanks for commenting
th-cam.com/video/_03tN94oMsA/w-d-xo.html
thanks for coming back to the loomis method tutorials
You're welcome Azethine and thanks a lot for commenting👍🏻✋
@@SanjogSinnarkar if u'd like, maybe put "turn on subtitle" at title / first line of description instead of bottom, and perhaps in caps coz its so useful and a must see and i would have missed it if i didnt watch this video twice
Hey Azethine, thanks for the advice. Even I was thinking that it should be prominent and people should not miss it. I will do that thanks.
th-cam.com/video/_03tN94oMsA/w-d-xo.html
Thank you, I've watched a lot of videos on this method and yours are very easy to understand and apply in my own practice.
you're welcome.
That's great to know. Thanks for you commenting, it motivates😊
You're welcome and thanks a lots for the motivating commet 😊
I am happy to hear that you are using it in your method.
th-cam.com/video/_03tN94oMsA/w-d-xo.html
Your method is very helpful to me l heartily thanks 🙏to you sir.
This means a lot to me thanks a lot for commenting 😊
Your tutorial in head drawing is slow and cool for me to understand the method, l really appreciate it.
Glad to know you liked it.
Thanks for commenting 😊
This tutorial is amazing i really appreciate you !!!!
Thanks for commenting 😊
Really helpful. I was drawing alongside your examples and I can see improvement in my proportions. Thank you!
Hey Ruth Terry, i am so glad to hear that it helped you. 👍🏻🙏
Thats great. Sure you will become 👍🏻👍🏻
Hello
th-cam.com/video/_03tN94oMsA/w-d-xo.html
Love the sphere 😮💜
Likewise 😊
amazing 😮
@@sarahsalem-oj8hk Thank you 😊
I had seen the loomis method before but I didn't understand it, your video made me rethink my mistakes and learn the way you do it.
Let's say that my main question was always "And how do you know where the inner circle goes..." obviously referring to the proportions of the face, but I think I need to study a little more in detail the human skeleton haha.
Thank you very much!
My apologies for replying so late …Thanks a lot for commenting.
After dividing the circle into 2 halves, divide the upper and lower half into 3 equal parts. So now, in total u have six equal parts. Now, extending the bottom line of the first and fifth part will give you the length of the oval (inner circle).
One suggestion keep paper aside and make the markings as you read and follow the instructions point by point. Let me know in case of any confusion or any clarification.
Thank you 😊
@@SanjogSinnarkar Oh I understand, then it is not necessary to start with the two circles, only with the reference lines and from there take the measurements of the circle, thank you very much I will try it now.
@@SanjogSinnarkarSe for possível, faça um vídeo desses passos, essa dúvida do tamanho do circulo interno sempre me deixou com problemas para saber se estava no tamanho correto, se bem que acho que entendi o que você escreveu, mas seria interessante um vídeo sobre o circulo interno, que eu acho que é mais difícil de acertar o tamanho correto para muita gente. Obrigado.
best ref to look and to imagine also.... very much practical for beginners
Thanks a lot for commenting 😊
Great👍
Thank you 😊
Thx for this helpful video:)
You’re welcome and thanks for thanks fir commenting
hello, thank you very much for this video. It was helped me a lot
You're welcome and thanks for commenting
th-cam.com/video/_03tN94oMsA/w-d-xo.html
Thank you 😊💕 so much 💞😘🥰🎉
You’re welcome and thanks to you too for commenting 😊
Thank you!
You’re welcome 😊
Thank you so much bless you
time 1:30 was good tips for me . first draw in middle a small line
ty
Great tutorial! It would be even better if you could fill in some of the missing details such how high is brow line, at what distance is the first curved line from the horizontal edge of the circle, etc. Thank you.
Thank you for your comment.
Please check my other videos from the loomis playlist, I have covered most of the stuff
@@SanjogSinnarkar Great! I’ll do that. Thank you so much for your reply.
th-cam.com/video/_03tN94oMsA/w-d-xo.html
You are the best!!!!
Hi, this is just about awesome ..I have a request, can you please explain on how to decide on size of the smaller inner circles and adjoining lines for eyes, lips and nose. Thanks a lot.
Thanks a lot
After dividing the circle into 2 halves, divide the upper and lower half into 3 equal parts. So in total u have six equal parts. Now if u extend the bottom line of the first and fifth part will give you the length of the oval.
One suggestion keep paper aside and make the markings as you read and follow the instructions point by point. Let me know in case of any confusion
@@SanjogSinnarkar Thanks a million for your guidance.
th-cam.com/video/_03tN94oMsA/w-d-xo.html
Thank you so much your videos really helps me ❤️❤️❤️🙏🙏
You're welcome and thanks to you too for commenting😊😊😊
th-cam.com/video/_03tN94oMsA/w-d-xo.html
Very nice 👍
Good
Thank you
اجيب منين كره لوميس دي
Where can I get the Loomis ball?
U can buy the transparent ball on amazon
l love it ⭐
Thank you 😊
Could you do one that with a head tilted more downwards? That is, so the eyeline is a little more downwards? Most of these are looking straight ahead or up, I feel like. These are really good btw!
Thanks for commenting. I have already created one. Check the link below of the video
th-cam.com/video/zV58FBvrGt4/w-d-xo.html
th-cam.com/video/_03tN94oMsA/w-d-xo.html
Good tutorial, man. Nice idea on the sub titles, but I will encourage you to also talk.
Hey thanks for stopping by and commenting😊 Sure I will add voiceover for future videos👍🏻
th-cam.com/video/_03tN94oMsA/w-d-xo.html
thank you for your tutorials..really helpful
You are welcome and thanks for commenting
th-cam.com/video/_03tN94oMsA/w-d-xo.html
how long u practice a draw until u can be masterpeace rightnow sir?
It may take anything between 5-15 years depending upon your skill level and time given to practice.
I can do circles with free hand but not this perfect 👍👍👌👌
That’s okay 😊
When you will practice then you will be perfect
True 😊
@@SanjogSinnarkarthanks sir for replying
Glad. Thanks to you too for commenting 😊😊
Hi I love this video! I wonder if you could link part 1
Thank you. Here is the link
Part 1 - th-cam.com/video/IECbyNuC6AA/w-d-xo.htmlsi=CvRf7g-mhqDqAx1g
Part 3 - th-cam.com/video/zV58FBvrGt4/w-d-xo.htmlsi=xdL1ol7ll6jYTa9Z
You may check check my playlist, there are other loomis videos as well.
How do you know where to put the circle foe the side plane? Top and bottom of circle are the brow and nose?
After dividing the circle into 2 halves, divide the upper and lower half into 3 equal parts. So in total u have six equal parts. Now if u extend the bottom line of the first and fifth part then it will give you the length of the oval.
One suggestion keep paper aside and make the markings as you read this and follow the instructions point by point, it will be much more clear. Let me know in case of any confusion
@Adrien Agreste will create video sometime later
th-cam.com/video/_03tN94oMsA/w-d-xo.html
Hi Sanjog, where do I find the #1 Loomis lesson?
Hi Milenadelapena,
Please check my playlist named “Loomis”
I love your videos...
Nice
Thank you 😊
really helpful video . will you plz teach us human body sketch and also more on heads and also hands.
Thank you. Sure, soon I will show videos on figure drawing
th-cam.com/video/_03tN94oMsA/w-d-xo.html
Jo aap chhotaa golaa bnaa rhe h side wala ye kis bace pr bn rhaa h
Hello: do you have the Globe for drawing the head? If not, do you know where I can purchase one. Thanks, you are great!!!!!!!!!!!!!!!!!11
Brother ap ka kam maja aya figher mai wo bnda ya bndi chair p beta ho wo drawing b share krain plz
Nice 👌
Thank you 😃
th-cam.com/video/_03tN94oMsA/w-d-xo.html
جميل جداً ❤
at 1st step i always end up making an oval with too much lines , pls tell how to fix it
@@raghavnigam3287 mark 4 points vertically and horizontally with equal distance. Hold pencil lightly and try to draw circle touch those four marks. This way you can make sure its circle and not oval.
Muito bom esse cara
Muito obrigado
nice
Thanks 😊
❤❤❤
Thank you 😊
Sir tell me please the oval length
After dividing the circle into 2 halves, divide the upper and lower half into 3 equal parts. So in total u have six equal parts. Now, if u extend the bottom line of the first and fifth part will give you the length of the oval.
One suggestion keep paper aside and make the markings as you read this and follow the instructions point by point.
Hope this helps.
Amei esse vídeo
Thank you
th-cam.com/video/_03tN94oMsA/w-d-xo.html
Per favore puoi mettere il link per l'acquisto della sfera che hai mostrato a inizio del video?
Lol she made ownself
Even you can do that on round shape like tennis ball
Fantastic!
Thanks😊
th-cam.com/video/_03tN94oMsA/w-d-xo.html
Hi can you make a video adding features to these faces
Hi Thatcrazygirl
I have recently created video on features. Please find below the link for the video
th-cam.com/video/OI4X1jtWQAk/w-d-xo.html
th-cam.com/video/_03tN94oMsA/w-d-xo.html
Can you please tell how to draw body
Its difficult to explain the process. It cannot be covered in one single video. Its big big topic where a series of videos needs to be created.
Learn The Fundamentals of Anatomy.
th-cam.com/video/_03tN94oMsA/w-d-xo.html
why only the right side of the head?
Next video will be the left side of the head and in future head turnarounds.
th-cam.com/video/_03tN94oMsA/w-d-xo.html
Please sir more video for loomis method, thank you.....Very helpful for me
Nice drawing.Name of the song?
Thank you
Thx for the video. How could we get that loomie's plastic model?
You can buy fillable ornament ball from Amazon and make markings on it.
th-cam.com/video/_03tN94oMsA/w-d-xo.html
Would love to get one of those Loomis ball designs. Where can I get one?
I have created at home
@@SanjogSinnarkar what did you make it out of?
Bought Christmas ornament fillable ball and drew suggestive lines.
❤🎉🎉🎉🎉🎉🎉🎉😢
😊😊
Sir what circle cm size 😣😣
There is no specific requirement, it depends on the head type 😊
what song? kkk
gives us back the voice ;_;
Anonymer Nutzer
I will👍🏻
th-cam.com/video/_03tN94oMsA/w-d-xo.html
Why I Cant Draw it?
Poda
Maybe you don't practice enough or you use the wrong technique.
th-cam.com/video/_03tN94oMsA/w-d-xo.html
where can i buy that reference ball?
AiMSTAR 96
You can buy the clear plastic ball and make your own markings as I have done
th-cam.com/video/_03tN94oMsA/w-d-xo.html
Please make tutorial for baby faces and female faces
Sure. Stay tuned 😊😊
th-cam.com/video/_03tN94oMsA/w-d-xo.html
Me to ek perfect circle bhi nahi Bana sakta
quero aprender com você
Thank you 😊
pls can't you do the front face ٩(๑꒦ິȏ꒦ິ๑)۶
Front view is already done, pls check part 1
Bro does NOT mew
(This is this comment sections mandatory brainrot comment brought to you by me)
hell
U are too slow bro
Hi sumedh Sonawane. I are talking about the speed? Can please elaborate
Thank you
???
th-cam.com/video/_03tN94oMsA/w-d-xo.html
❤❤❤❤