Your content is helping my OCD see the difference between fixed and restored. It’s quite therapeutic. No sarcasm here. Perfectionism has caused me genuine years of mental health problems. I am trying to teach myself that in some cases, good enough really is good enough. Thank you.
I'm learning that same lesson as I'm getting older. As a young fella I regularly made mountains out of molehills - a faulty spark plug turned into rebuilding the whole engine, that kind of thing, to the endless frustration of the good lady. Nowadays I'm much more accepting that just getting it working again is mostly all that's needed.
Every time i get it back after the new guys got it for a bit well one broke the rear end one blew out the head gasket one broke the starter wire but it was also needed to run the thing so you had to hold the wire on the contact and drive at the same time was a pain in the back to get it to the shop
Sometimes I see you repair this stuff and think it should be in a museum... then at the end you always show whatever you just restored being used again for it's original purpose and it's so much better than just having them sitting around on display.
@@MartyT Best line in regard to shaking hands with danger was a response by one of AvE's subscribers. " If I want to shake hands with danger, I'll just leave the toilet seat up"
Marty, your friend needs to be working in safety glasses, goggles ,a hard hat, a face shield, gladiators gauntlets, and cricket players wicket keepers leg pads! He is a menace to himself and anyone anywhere near him!
I would imagine a vlog of various duff bloopers could surface around Christmas/New Year. Safety first by dusting off your old cricket box, no fun taking one in the nuts by error. 🤣👎⛑
“There’s your problem”... the last time I heard that it was my dad fixing my mom’s blender. He finished the statement after a cockroach fell out of the motor area... “the engineer died.”
Entertaining video as always! Just a caution: That exposed fan belt pinch to the pulley will take your fingers in a trice. A fan belt cover or an enclosure of some kind will make it so that you can operate it without worrying that it might catch your clothes (pull you in) or that one of your kids watching you work might get to close or curious. I find that if you have that moment and think: "You'd have to be an idiot to put your finger right... THERE - OUCH!" Then it needs a cover.
@@BritishEngineer you say this about a video where a grown man hits himself in the balls with a hammer and the head with an axe inside the first 2 minutes. You don't need to be dumb, just distracted or misjudging your environment for a split second and oops! only 8 fingers for the next 40 years.
Throw a few shovels of sharp, 25-50mmstone in the drum. along with a few bigger ones & you'll soon have all the dried on cement knocked free - makes mixing far faster.
Got smacked right in the middle stump the replay was classic. Best content on TH-cam you make life fun again fixing one mans junk is another mans treasure that’s that still has a purpose! Thanks Marty and ya mate Living the dream
With the motor mounted so low, it looks like it could be liable to cop the odd splash of water, and dustings of cement and aggregate into it's cooling vents. A useful upgrade could be to modify a big paint tin, or a plastic container, to make a protective motor shroud. That may be over-engineering though(?), it does seem to be working fine, the way it has done apparently for many years. Another good rescue, with a good friend! Still good entertainment for me, after 2 years.
Hi Marty, like your latest video/ thank you.. Ok I was using a borrowed cement mixer of a different make to yours but the same sort of thing, and thats bearing had gone, and as I was desperate to be getting on with mixing concrete i tore it apart to find most the balls had gone, and i never had a bearing i could make fit, but in my steel shed looking for inspiration looked at an odd piece of scaffold tube/ hmmm i wondered, i tried it for fit in between the inner and outer races of the bearing and found it a reasonable fit/ so cut a piece the width of the bearing, cleaned it all up, a few spots of mig weld, lots of grease, worked a treat/ lol.. Done some heavy mixing with it, pumped grease in on occasion with a grease gun, finished my job, cleaned it gave it back to Bro In Law told him the bodge, still working well as far as I know.. When I had got it originally Bro In Law used it to build his house, gave it no attention, so the reason it was as is after standing unused for 25 years or so, but it works now/ back yard mechanics or using your brain when in need/ Thanks anyway Marty, keep then vids coming. Ian - UK.
Thats the problem with this disposable society shown up really well there Marty, a bit of hard graft, a can do attitude along with a whack to the sheep sticker and a slice to the noggin and Voila! An ancient Conc agi lives for another 20 years. Simple design, Ya gotta love that!
I finally started on my boat, woohoo, amazing. I build a double H frame, like a rectangle but 4 end lengths hang out with 4 legs. Took me forever dragging all the tools outside, cutting 1x 3m into 2x 1.5m length & 4x 800mm legs. When together it resembles a square 1.5m x 1.5m with 2x 750mm arms at either end on 4x 800mm legs. I'll be able to build my boat on top of it & spin it on top of it to fibreglass the Corflute & plywood. I used a nail gun to fab it together quick but as I suffer from extreme arthritis I have to stop many times just doing something simple., happy xmas to you & the family.
Hey bro! Love your work. I find it crack up how you use that plastic thing to full up ya oil reservoirs. These local fellas make them and it reminded me of you. You should get one and rep nz made and maybe it might be a bit easier for ya. Cheers Hunter, whakatane, BOP, NZ
I enjoy watching what you come up with to do some of these projects on your own. It is much different when there is not an extra pair of hands. I especially like the "deals" you seem to walk into and fixing things up and getting it running. Although I think there is something missing. The goofs, accidents, and just plain "dang!" :)
I guess people are so laid back and just don't care or what but grease works wonders on equipment and can keep things working for years. Great video Marty T you are the best mate.!!!!!
You do know that it is a Kiwi tradition for the missus to make scones and have them ready with beers at the end of the job. I hope she come through with that one!
Nice fix! Mine was $50, down from $75, because it wouldn't run. The fix was a new cord, after the old snake nest and eggs were cleaned out of the junction box on the motor.
Good call on the pulley size Marty , just about ideal now . To clean the crap off the paddles chuck a hand full of scrap iron into the drum and run it propped just above horizontal. A half hour will see all that accumulated mortar chipped off and the paddles back to bare metal .
Looks just like one my father had. We mixed and poured an entire patio, in 2' x 4' sections with it. I was about 14 years old. Since I was the unskilled worker, I did all the shoveling, while my dad watched. He finished the concrete. I think he played a trick on me, I do...
After dealing with all the coronavirus stuff I needed the chuckles you provided. Using the back of the ax to pound on stubborn, stuck metal parts can give you an unintended close shave. Good lesson to store in memory. Have a great weekend, stay safe and healthy.
I was thinking hew was gonna hit himself in the eyeball with the ballpeen. When you turned it on for the first time it looked fast but I just figured that I was getting old. Thanks for the video!
Marty, I would bet that the original design of the inside end that bearing was NOT open to cement, sand and water. Find some kind of cap like a trailer bearing cap and save yourself the aggravation of having to fix it all over again. Here in Texas mud-daubers like to build nests inside electric motors. They seem to be attracted to the starting winding governor mechanism requiring many a motor to be dismantled and the hardened mud cleaned out before being able to mix mortar. And then there are mice and rats that for some reason like to build nests inside the blower shroud of gas engines, requiring disassembly and removal of nests before further use. Really enjoy your videos. Keep them coming.
Your content is helping my OCD see the difference between fixed and restored. It’s quite therapeutic. No sarcasm here. Perfectionism has caused me genuine years of mental health problems. I am trying to teach myself that in some cases, good enough really is good enough. Thank you.
Yes well said Some things dont have to be perfect to work perfectly well
I'm learning that same lesson as I'm getting older. As a young fella I regularly made mountains out of molehills - a faulty spark plug turned into rebuilding the whole engine, that kind of thing, to the endless frustration of the good lady. Nowadays I'm much more accepting that just getting it working again is mostly all that's needed.
woopimagpie youed hate the mower at work gota clean the plug every 8 to 20 hours of running was buying plugs but after 4 started cleaning
Every time i get it back after the new guys got it for a bit well one broke the rear end one blew out the head gasket one broke the starter wire but it was also needed to run the thing so you had to hold the wire on the contact and drive at the same time was a pain in the back to get it to the shop
I do like it i will miss that old beast when we get a new hill mower
Man, buddy got popped in the ball bags, almost gave himself a scalp job... This is my kind of content Marty!
He was a busy man!
Proceeds to apply angle grinder to hand-held part near groin later! sure likes a bit of spice in his life
A man gets a job done this here parts son!
You two idiots are really something else ...lmfao! subscribed asap!Love you Guys ;-) keep it coming
That shot on the hang lows that ol Mustie took would of brought a man to his knees Right set of irons on that one!
Going back watching some of the oldies Marty. I will say it again... You can fix anything.
I could watch this man fix anything and not be bored. I'm yet to understand why.
Problem solving is always interesting. So is "waste not, want not."
It is a mystery. Better than the NFL.
Don't over think it, just go with the flow!
I couldn't miss the Fred Braby & Co tank, used as a workbench. Those old iron tanks dotted all over the "bush".
iPhone's must be a lot tougher in NZ!
thats what i thought! not the only one i guess.
@@user-qx2rr2rz2z Nope, not the only one. Came here to comment on that phone I wanna have, too ....
Marty T, Mustie1, and Watch Wes Work - the TH-cam kings of making abused and neglected good again!
Must agree
My top 3 as well.
They each have their own niche
check out Jonathan W when you get a chance, he does some interesting stuff as well.
Not to mention Lord Muck and Diesel River
I don't remember being down under since the 60's but that sure looks like me trying to work! LOL
Even though we ballbag owners cringe when someone gets hit in the nuts, it's still funny.
Yep had me heading to the comments section 😁
Sometimes I see you repair this stuff and think it should be in a museum... then at the end you always show whatever you just restored being used again for it's original purpose and it's so much better than just having them sitting around on display.
Right in the man tackle with the pry bar 🤪😂
My mate shakes hands with danger on a daily basis ;)
@@MartyT good one 👍🏻😂
@@MartyT We need more content with him. Comedic sidekicks are always welcome.
Dear @@MartyT
I guess that he has a good guardian angel!
Best regards, luck and health.
@@MartyT Best line in regard to shaking hands with danger was a response by one of AvE's subscribers. " If I want to shake hands with danger, I'll just leave the toilet seat up"
That pup looks like he could use a good meal!
Marty, your friend needs to be working in safety glasses, goggles ,a hard hat, a face shield, gladiators gauntlets, and cricket players wicket keepers leg pads!
He is a menace to himself and anyone anywhere near him!
I would imagine a vlog of various duff bloopers could surface around Christmas/New Year. Safety first by dusting off your old cricket box, no fun taking one in the nuts by error. 🤣👎⛑
“There’s your problem”... the last time I heard that it was my dad fixing my mom’s blender. He finished the statement after a cockroach fell out of the motor area... “the engineer died.”
Your Dad sounds like a legend
Oh your bud nailing himself in the coin purse was hilarious.
Its extremely satisfying repairing something that someone else threw out because they couldn’t.
Great shot of the mix taking place inside the mixer.
I particularly enjoyed the nut crunch.
Cool to see a random fridge next to the machine and digger.
That's taking "down under" a bit too far...lol
Happy to see the finger breaker 2000 is up and running!
Last year I pulled a similar one out of a scrap heap, rebuilt it gave it a fresh coat of paint and poured a patio with it this passed summer.
Great ! You're in the Serious DIYers gang now !
I got one for free used one time, my brother used one time brought full of cement
Marty doesn't believe in painting old machinery.
Entertaining video as always! Just a caution: That exposed fan belt pinch to the pulley will take your fingers in a trice. A fan belt cover or an enclosure of some kind will make it so that you can operate it without worrying that it might catch your clothes (pull you in) or that one of your kids watching you work might get to close or curious. I find that if you have that moment and think: "You'd have to be an idiot to put your finger right... THERE - OUCH!" Then it needs a cover.
I don’t think his kids are dumb enough to get caught up in machinery.
@@BritishEngineer you say this about a video where a grown man hits himself in the balls with a hammer and the head with an axe inside the first 2 minutes. You don't need to be dumb, just distracted or misjudging your environment for a split second and oops! only 8 fingers for the next 40 years.
Nice job like seeing the old stuff coming back to life. People throw to much stuff away now days
Your friend is trying his best to win a Darwin award. lol
Throw a few shovels of sharp, 25-50mmstone in the drum. along with a few bigger ones & you'll soon have all the dried on cement knocked free - makes mixing far faster.
Got smacked right in the middle stump the replay was classic. Best content on TH-cam you make life fun again fixing one mans junk is another mans treasure that’s that still has a purpose! Thanks Marty and ya mate Living the dream
I believe that open end of the hub, inside the mixer, is supposed to have a bung cap to keep the concrete mix out of the hub shaft/bushing.
That makes sense, I'll make one
Nice to finally see some precision angle grinder machining
thanks for showing that clumsy people can fix things. gives me hope
Took a bit of a beating to get that hub out. Almost as if it was cemented in place.
With the motor mounted so low, it looks like it could be liable to cop the odd splash of water, and dustings of cement and aggregate into it's cooling vents. A useful upgrade could be to modify a big paint tin, or a plastic container, to make a protective motor shroud. That may be over-engineering though(?), it does seem to be working fine, the way it has done apparently for many years. Another good rescue, with a good friend! Still good entertainment for me, after 2 years.
I can relate to the axe hammer incident. Driving a tent peg - sharp end sliced a knee! Two tape stitches!
i wonder how many times water has fallen on the electric motor, absolutely genius place to put it, could only happen in oz.
Good job Marty, nice to help friends your a good dude!
4:30 - Haha i like you buddy's thinking. Rust - Nature's Loc-Tite & sealant
No concrete mixers were harmed in the making of this video! Just three nuts :)
What a view. I live in florida and don't get me wrong but.... WOW. The view is absolutely stunning.
Hi Marty, like your latest video/ thank you.. Ok I was using a borrowed cement mixer of a different make to yours but the same sort of thing, and thats bearing had gone, and as I was desperate to be getting on with mixing concrete i tore it apart to find most the balls had gone, and i never had a bearing i could make fit, but in my steel shed looking for inspiration looked at an odd piece of scaffold tube/ hmmm i wondered, i tried it for fit in between the inner and outer races of the bearing and found it a reasonable fit/ so cut a piece the width of the bearing, cleaned it all up, a few spots of mig weld, lots of grease, worked a treat/ lol.. Done some heavy mixing with it, pumped grease in on occasion with a grease gun, finished my job, cleaned it gave it back to Bro In Law told him the bodge, still working well as far as I know.. When I had got it originally Bro In Law used it to build his house, gave it no attention, so the reason it was as is after standing unused for 25 years or so, but it works now/ back yard mechanics or using your brain when in need/ Thanks anyway Marty, keep then vids coming. Ian - UK.
Dude great job. Keep these videos coming..
Is it bad that slow motion nut smack cracked me up so hard.
@Brandon It's always funny when it's not you ;)
Thats the problem with this disposable society shown up really well there Marty, a bit of hard graft, a can do attitude along with a whack to the sheep sticker and a slice to the noggin and Voila! An ancient Conc agi lives for another 20 years.
Simple design, Ya gotta love that!
I finally started on my boat, woohoo, amazing. I build a double H frame, like a rectangle but 4 end lengths hang out with 4 legs. Took me forever dragging all the tools outside, cutting 1x 3m into 2x 1.5m length & 4x 800mm legs. When together it resembles a square 1.5m x 1.5m with 2x 750mm arms at either end on 4x 800mm legs. I'll be able to build my boat on top of it & spin it on top of it to fibreglass the Corflute & plywood. I used a nail gun to fab it together quick but as I suffer from extreme arthritis I have to stop many times just doing something simple., happy xmas to you & the family.
That hurt all the way here in Alamo Tennessee USA..
I guess he's done making children already lol
When ever there a nut shot its funny till its ur nuts then its not lol
Good for another 50 years
Your Friend is a walking safety hazard😂
Hahaha was just writing that it was EXTREMELY fast and needed a smaller pulley on motor then it came up 😂
that noise can't be mistaken , even blindfolded it's easy to know what it is , too many hours
on a shovel . Good to see it going so nicely .
I've got an old bamford cement mixer that goes on a tractors 3 point linkage
1:34 ouch! 😂 2:00 splitting headache 🤕
oh man that crowbar accident...OUCH
Did not expect this video to be this funny! I was struggling so hard not to laugh as I was watching at work.
Nice job Marty
Really enjoyed this one guys, thanks for posting.
Hey bro! Love your work. I find it crack up how you use that plastic thing to full up ya oil reservoirs. These local fellas make them and it reminded me of you. You should get one and rep nz made and maybe it might be a bit easier for ya.
Cheers
Hunter, whakatane, BOP, NZ
That blokes a hazard Marty.
I am surprised your friend still has all of his digits and goodies. Haha. Nice one, Marty.
best part of this video was the tui at the end. majestic sounds in the sounds
Love it when an old machine is saved from the scrapper, and given a new lease on life! :)
He ringed his own bell!!!!!
I enjoy watching what you come up with to do some of these projects on your own. It is much different when there is not an extra pair of hands. I especially like the "deals" you seem to walk into and fixing things up and getting it running. Although I think there is something missing. The goofs, accidents, and just plain "dang!" :)
A fine addition to the vintage machine orphanage.
Sweet,to clean out the old crete in that throw a few half bricks in it and let it bash about for a while.
no pain, no gain
Another great video.
ooooh right in the plums. The old five finger vice strikes again
That pivot bearing seems super inadequate even if new. I built a small (and big) mixer using the fwd hub, they are strong and free.
I guess people are so laid back and just don't care or what but grease works wonders on equipment and can keep things working for years. Great video Marty T you are the best mate.!!!!!
You have too much fun, please continue.
Goodonya helping out a mate !
His Mate sounds like Lucky's Dad on Bluey
You do know that it is a Kiwi tradition for the missus to make scones and have them ready with beers at the end of the job. I hope she come through with that one!
Good stuff! Now all you need to do is to train the missus to use it.............. ;)
Nice fix! Mine was $50, down from $75, because it wouldn't run. The fix was a new cord, after the old snake nest and eggs were cleaned out of the junction box on the motor.
Good call on the pulley size Marty , just about ideal now . To clean the crap off the paddles chuck a hand full of scrap iron into the drum and run it propped just above horizontal. A half hour will see all that accumulated mortar chipped off and the paddles back to bare metal .
What is it about what you do that is o satisfying to watch? I find your vids so very relaxing and entertaining. Keep 'em coming!
That’s a good iPhone your beating it with
Oops too late ,
Someone beat me too the draw,
OH I felt that Marty right in the family jewels And if it is use full it is not a back yard full of junk .
Simple or complicated Marty to the rescue!!!!!!
I do not want to stand next to your buddy in the next thunder storm!!
Reminds me of the massive amount of builders mix I shovelled into my dads mixer back in the 1970’s in Wellington :)
Marty you will have to buy another property to store all these new fixed bits
Good job, i love to see old stuff being repaired instead of being thrown away !!!!
Looks just like one my father had. We mixed and poured an entire patio, in 2' x 4' sections with it. I was about 14 years old. Since I was the unskilled worker, I did all the shoveling, while my dad watched. He finished the concrete. I think he played a trick on me, I do...
2:45 - now you're just showing off - beautiful view
Sandpaperman can do all so it´s working and with little help using a hammer
You are so lucky those bolts came loose, I've worked on a concrete mixer and I broke two bolts... boy was I pissed
And it works again. That is a good fix when it works again... Thumbs Up!
After dealing with all the coronavirus stuff I needed the chuckles you provided. Using the back of the ax to pound on stubborn, stuck metal parts can give you an unintended close shave. Good lesson to store in memory. Have a great weekend, stay safe and healthy.
Excellent post. ❤️👍
I was thinking hew was gonna hit himself in the eyeball with the ballpeen. When you turned it on for the first time it looked fast but I just figured that I was getting old. Thanks for the video!
I've got one of these that needs fixing bro old school old school looks way older than that one bro
top result mate!
Watching the repair was fun, but now I really want to see what you're building with the concrete!
Marty, I would bet that the original design of the inside end that bearing was NOT open to cement, sand and water. Find some kind of cap like a trailer bearing cap and save yourself the aggravation of having to fix it all over again. Here in Texas mud-daubers like to build nests inside electric motors. They seem to be attracted to the starting winding governor mechanism requiring many a motor to be dismantled and the hardened mud cleaned out before being able to mix mortar. And then there are mice and rats that for some reason like to build nests inside the blower shroud of gas engines, requiring disassembly and removal of nests before further use. Really enjoy your videos. Keep them coming.
Sure made for a great video bro. All the best
Weld a channel iron or L iron across that back strap to stiffen it up a bit. It will help keep the teeth aligned longer.
So simple and so satisfying that one!