Footing Design and Reinforcement Details - Column Design and Reinforcement Details

[@hassankabba5387]

This is very good Engineer on earth may God provide more life for him.

[@josephpinto8378]

I like it 👍

[@shelley6779]

This should be a basic concept. We all have to get instruction from a qualified structural engineer for the Architectural drawing. The strength of the concrete will depend on the country to country. Standard norms are ok. It may be changed in practical conditions. Quality of mixing water, Quality of the different types of steel rods with different manufacturers, Soil conditions wind force, and weather conditions. Appreciate the presentation

[@ssemakulaibrahim-gp5tt]

Any scholarship in construction am ready I like the way u do, u are not selfish,I have learnt something from u, salaam alaykum

[@varagantinagesh5926]

I learnt important things in construction of buildings..Surely it helps non civil engineering people ,great insight and while constructing their own houses

[@shikennoace7236]

Thank you Sami usthaz.
Your tutorials are very helpful
Usually when asked people will hide such information and not share.

[@shikennoace7236]

Pls usthaz, can i get any Mail ID ?

[@shikennoace7236]

Is there any book or pdf available related to on site knowledge ?
I mean from setting layout, excavation, foundation, shuttering and information related to structure.
I am a on site supervisor.
Pls help sir

[@mknowles8784]

This is excellent! I live in The Bahamas and I find this very helpful. Thank you for posting.

[@avtarsingh-or6qv]

Very important information about Column nd it's footings.

[@mansourshapouri1874]

Thank you so much for such great information. God bless you and your family!!!!!

[@JanPLopez993]

Loving these basic videos, even as a Civil engineer !!

[@centlaz1678]

Am really appreciate your content Sir May God gives yu a more life
💯💯 from Tanzania 🇹🇿

[@ssemakulaibrahim-gp5tt]

Am well convinced and interested in ur teachings and they are true,

[@josephmasvokisi7745]

You guys are highly knowledgeable

[@duncanindiavo6543]

Useful content i'll be following you all mi life...

[@tafadzwamusekiwa659]

These are good notes for preliminary design, safety and economics will determine actual final results

[@viswanathana1399]

Very good teaching . It is better to write your notes little bigger than you write at present , in small letters .So that we can see in mobile ...

[@buildasnest481]

Thank you for your usual succinct teachings, those this measurement for 2-3 story building also apply for 1 story building rcc footings

[@bikualemtamiru3419]

you engineering problem solver. god bless you sir

[@michaelmelocoton8197]

Sir your content is very good and you are very consistent..Thank you professor from the philippines

[@sreejithshyam]

🙏Thank You fir the valuable information , searching for🙏

[@ednatala1378]

Sir very clear explanation you done I'm not engr but I got an idea to you tnx very much sir God bless from Danny Tala of Philippines

[@MzangongMartin]

Thanks so much u are doing a great job

[@ar.asirnirmal3847]

Hi brother so happy of your videos very much helpful. referring the videos form chennai. thanks

[@mohammadkhorshedalam133]

For footing 45mm clear cover is low i think it is better to make it75mm. because the footing is underground and always under soil pressure & moisture content

[@mahadevan1903]

Moderate 50mm . Severe extreme conditions morethan 50mm

[@mahadevan1903]

Not soil pressure , it's based on environmental conditions mild moderate severe extreme

[@mohdnazrisulaiman2535]

Thanks a lot for very informatif lecture.

[@hassankabba5387]

Thanks very much for lectures. I live in Sierra Leone west Africa.

[@izo345]

I advise all of you to get professional civil engineers on your projects, so many factors come into play in footing design, there are NO standard footing details everything depends on that particular project, it can end up being catastrophic In the long run if you design footings yourself without engineering knowledge.

[@Marinapetelin]

Civil engineers now have software to plan which size of footing and the size & number of steel bars to use.
I have a renovation now in my two story house, I used 1x1 size of footing and depth for additional colons using 6 16mm and 2 12mm steel bars for colon, my structural engineer said that’s still too weak that the house might collapse because they base on the civil engineering software computations.

[@karimedutainment5861]

Sir, is it possible you make a chart or a table for all the requirements for beams and columns, their size, spacing, steel dia, number of steel bars, size of footing, type of footing, depth of footing, sbc, conc grade etc.. for domestic and commercial buildings from G+1 up to G+10? It will be very helpful and we will appreciate.

[@aviko930]

No. of bars = No. of ads in this video

[@madhukoteswararao5564]

Good informetion for genaral peopls

[@gurumallappaparvathaiahmal6309]

Its true explanation thank you

[@victordauge2300]

Thank you. My footing is 30cm depth and width for my brick house. I live on a rock mountain top. Am I able to so another storey of brick for a 2nd floor? Please assist thank you.

[@denniscrooksmusic3970]

Great job love your explanations

[@robertsoza2292]

Thank you for your help! Having these walkthoughs for several scenarios is great. These are stand alone columns.
Any guidance on building with footings and also rebar bends?

[@benardmwamba459]

Hi sir this is great stuff ,I'm just a blick layer but with your teaching I feel already like an engineer thanks

[@kingsharavinho7184]

Thank you for your explanation

[@surveyingengineeringdesigninfo]

Very informative

[@rafiibanez1163]

The information should come with give also the formula so that civil enginering could clear undertand. 🙏

[@dr.nakazwenamwiingam-beenz3482]

My understanding is that the flood area should have a much depth foundation, in addition the foundation should be covered with a heavy duty construction plastic to reduce humid. I used this method for my guest house.

[@nathdizaradi6775]

thank you so much. you are so helpful. keep up the great work and thank you for thinking of non civil engineers as well.

[@husseinmuusa3895]

Thanks for the advise it much usefull.

[@simonstclair286]

Did you say that the depth of footing for 1 or 2 storey building is 1.2 - 1
5m ?

[@michaelharris8554]

How do you calculate structural loads to a building, what formula is used to calculate structural loads of bldg?

[@amrendramishra545]

Vv nice vdu

[@kenrickwilliams3669]

Very INFORMATIVE

[@primeproperties8429]

Can we use 9" X 12" column with dia 12mm rods-8no.s for G+1 residential building?

[@rupakartlife8240]

Sure...4ft×4ft base

[@somyapatel6969]

Very very good sir...

[@michael9905]

You explain everything very clearly. Much thanks.

[@TitusMukemukangala5484]

Thanks for the help

[@victordauge2300]

In my brick house instead of putting concrete columns I put steel posts inside the brick house. Can it still act as a concrete column?

[@nexusn9835]

Thanks for the tutorial. So, which standards do you use? Eurocode or ?

[@laykhom3212]

Audio is perfect

[@prashanthgeddam8013]

All the structures following indian standard codes or British codes ?

[@arielpactoranan6464]

thank you sir, it is very informative

[@nurulamin5217]

Your explanation specialy on footing design just like a good mason but not an enginerr.

[@romycruz4498]

Thanks. This is very informative. I'm planning to renovate my house and make it 2 storey with mezzanine floor in between for bed rooms.the top would be a roofdeck. I will use steel as columns and beam. The columns would be on top of the rcc footings/1ft above-ground column. Thanks.

[@namakanthony1837]

What is this rcc

[@nzabarindaalphonse9189]

Good and well understandable

[@rokkamkarnakarreddy]

good information

[@jerrychibunna1892]

O
If I want to use 6 inches block for a storey building, can I use column and plinth beam of 6inches width by 9inches depth

[@abdofiza641]

Thank you so very very much

[@leonardoa.p1143]

Thank you sir for the info.

[@najibaibrahim3097]

İf i had overlap in the middle is there the same thing to tie!!!??just i need closly at the bottom and top?? Thank u

[@hussenabdurahaman9519]

hello master I need your comment for my g+1 ho 8mx8m size.
For all colum and beam 4-12mm bare 2-10mm bar NB-Centeral columns 4 12mm and 4 10mm steel
dia 6mm in 15cm space
M20 grd cemen
Column size 27cm x 27cm
Beam 22cm x 34cm depth
Bean to beam spacing 4m
Footin 1mx1m. By 12mm steal The depth is 1.4m soil bearing capacit v. Good
I finished the slab can continue the next staps?

[@papaabevlogtv]

I start to build my house in the philippines i want to elevate from the road elevation may be 60cm my question is i need to put beam or not if need to put beam what is the hight of the beam from the footing thank you

[@nxtgen6295]

Good Info. Thanks

[@treborvagal3607]

Good but we need design computation for rebars to prove if it's safe for building permit that's the important

[@mohammadkhorshedalam133]

degree of cone depend on direction of rotation. so hook cone is 45 degree as per drawing.

[@abuhossain673]

I'm from Bangladesh

[@inhinyerosibiltv2172]

Thanks sir for the information.
How about the design of the beam, can you give also the design for it? Thank yot.

[@dr.nakazwenamwiingam-beenz3482]

Hi again. Thank you for all your work. Question, 1. i'm designing a 3 to 6 floor building for a Shore Front Resort. I can i present this method to my local Civil Engineer? 2. Can you demonstrate the method used for an inner Beam Pillar Structure? Thank you again

[@allamsettibhagavan7338]

Excellent 👌

[@litomoreno8118]

thanks fir the info

[@fikreyohannesfikremicheal6419]

My question to you is what if we use spot welding for rebar instead of trying?

[@inhinyerosibiltv2172]

Sir the depth of footing your talking about is the thickness of footing?thanks

[@Nabampunnazikam]

No its depth of excavated soil

[@inhinyerosibiltv2172]

@@Nabampunnazikam Ok sir thanks. How about sir the thickness of column footing, what is the allowable thickness for Two storey house or bldg.?Thank you

[@tatyasutar]

👍👍👌👌

[@zeusedwards9311]

If your 3 story building is 20×40 do you still need 12×12 Colums ?

[@VMX-pc2ye]

helo sir can u make a video for this kind of topic but for single storey house only thanks sir

[@aakashmore5277]

Sir is it okay to use 9"X12" column for two storey house

[@abdulraoof8138]

Could you plz tell us about sloped footings?

[@jkaduda]

Hallo , what does 2 story mean, do you count bottom and upper floor ? Or is it bottom 2nd upper floor and 3rd upper floor ?

[@rivouture3254]

It includes ground floor and 1st floor

[@modhukollaanjaneyulu8186]

sir do videos on desine column & beams also

[@bilquiskhan3385]

Sir plz help...for g+2...CE gv 300*300 with 8no.of 16mm ...is it right..plz reply

[@mansooralipoetry]

Great Work Sir

[@peterlim559]

Thank you Sir, may I ask what's the best solution if my land always flooding?

[@SaddamHusain-qo8cl]

the footings or foundation will be different in flooded area, you will be using pile foundation system.

[@peterlim559]

@@SaddamHusain-qo8cl ok thanks Sir.

[@shaistabegum765]

How can you give such designs without analyzing the loads coming on the structure which again depends on type of structure

[@LSBS11]

Oh my god, I am astonish oh his design result.

[@freemankenyoane2883]

Is this applicable to commercial office buildings please??

[@sultansalahuddin6807]

Sir this depth include blinding concrete or not?

[@WasimHDR]

Great work sir.

[@malekabodke1496]

Dear brother,
Depth of of footing is too high. I think it should be in feet not in meter

[@oscarhabineza7953]

For depth of food is too much you say,I thinks there is same errors.

[@jintovmathew9502]

yes

[@ssentamuandrewtitibya1048]

Thanks sami

[@donaldjayasundara2824]

If i use 16 mm iron four nos for 12 by 12 column for 3 story building is it ok.footing is 4' by 4' defth is 4'

[@donaldjayasundara2824]

My house is g+2.

[@asifkhan7291]

der kha rora der kha

[@IsmailKhan-wx1cp]

Dear sir make video about beam and slab design also. Thank you so much

[@rameshramesh-fg8rr]

Explain beams and slabs

[@nurulamin5217]

Mr. Sami, is your explanation for engineers or for layman,l am getting doubt.

[@chrysjac5195]

For non-engineers

[@billionairelifestyle3536]

LOOK AT HIS EYEBROW SIZE😳😳

[@subhadeepchakraborty9325]

how can I make columns between 18 feet gap for three storey building ?

[@shaikkhaja2321]

Up to how many floors we can use these size of footing sir

[@treborvagal3607]

we need a design computation to know if the rein bars size are right...not assuming bars only

[@subhanhelalzi]

thanks

[@entertainmentcentre2395]

Please explain from footing to slap

[@mansooralipoetry]

Keep it up