Great video, however I was under the impression that the lock nut & washer on the pressure plate had to be removed and the pressure plate bolts had to be turned 2 turns (loosening or tightening) at a time . I just put mine back together yesterday and do I have to go back inside and adjust the #1 Push Rod which is a very important step to get it ADJUSTED before you even put the cover back on. And Don't over tighten the Pressure Plate Bolts or the Clutch Cover Bolts, both should be snug, or you will strip them and on the pressure plate I had a friend helping and the damn pressure plate (2) bolt broke off at the clutch basket and it cost like 2 times as much to replace the springs and the basket!
you lined up the groves to each other on the friction discs but didn't tell people that the double notches on the friction discs go in between the two indicator dots on the basket, this is extremely important, or clutch drag will occur when the oil gets hot
Thanks for the tutorial. I feel confident to replace my clutch on my 2000 v star 650. But...Damn, I just changed my oil 2 weeks ago. Well, another oil change coming soon.
You pulled the clutch out and noted the bevel side facing in, then you noted the bevel side facing out when installing the first steel plate lol. Guess it goes to show it probably doesn’t matter. Nice video.
Hello. Please confirm how to regulate push rod #1 after installing the new frictions disks? The full package of disks became thicker and push lever is in wrog position as you know. If you turn it clockwise, then we will not have a stock on the thread.
Very well done. Thank for. Thank and make it look so easy but one thing if any. Temp to do this watch careful watch it more then just once look at. The detail very wisely you dont over look what very important. Look bolt goingback they all different size and make sure clean your hand are glove are clean and dont wal way from it uncovered for sure if tire in to. You got put it back. If dont part be come up missing and you end up. With bike that not running because you dofnt finished so make sure you got all your part gasket and filter. Before hand
You said the bevel goes inwards when you took out the plates, then when installing the new plates you put the bevel on the outside ? So you installed them the wrong way round.
do you HAVE to remove the exhaust? the reason I ask is because my exhaust studs are rusted so bad there's not even threads showing its just a rusted shaft
The music, you really don’t need it, lower volume is better, it’s not bad, just gets annoying and redundant, I am not being critical but just feedback.
GREAT video my man! You made it look really easy to do. I hope you have more "how to" repair videos on your V Star.
Very helpful this is going to be my weekend project!
Super straight forward! Loved the video, and love the fact a new clutch is easy to install!
Great job -- good camera shots, and very well explained. Thank you.
Damn good video bud! Ya made it look easy. Plan on doing mine soon and will be using this as a guide!!.
Ride on and ride safe brother!👊👊
Great video, however I was under the impression that the lock nut & washer on the pressure plate had to be removed and the pressure plate bolts had to be turned 2 turns (loosening or tightening) at a time . I just put mine back together yesterday and do I have to go back inside and adjust the #1 Push Rod which is a very important step to get it ADJUSTED before you even put the cover back on. And Don't over tighten the Pressure Plate Bolts or the Clutch Cover Bolts, both should be snug, or you will strip them and on the pressure plate I had a friend helping and the damn pressure plate (2) bolt broke off at the clutch basket and it cost like 2 times as much to replace the springs and the basket!
Amazing work , I will be doing this next week when my gaskets arrives.
you lined up the groves to each other on the friction discs but didn't tell people that the double notches on the friction discs go in between the two indicator dots on the basket, this is extremely important, or clutch drag will occur when the oil gets hot
So there is a very particular placement of each friction disc?
Thanks for the tutorial. I feel confident to replace my clutch on my 2000 v star 650. But...Damn, I just changed my oil 2 weeks ago. Well, another oil change coming soon.
Atleast you can reuse the filter.
You pulled the clutch out and noted the bevel side facing in, then you noted the bevel side facing out when installing the first steel plate lol. Guess it goes to show it probably doesn’t matter. Nice video.
Best clutch plate replacement video yet made it look simple but would drain oil and buy new I just dont like the mess
Hello. Please confirm how to regulate push rod #1 after installing the new frictions disks? The full package of disks became thicker and push lever is in wrog position as you know. If you turn it clockwise, then we will not have a stock on the thread.
great info! nice job with the camera too.
You put the oil filter in backwards
I was wondering if this bike could have an open primary clutch belt assembly?
The rings with the teeth and the friction plates do you put them on ring then friction plate, so forth and so on?
What are the torque specs for the springs
Very well done. Thank for. Thank and make it look so easy but one thing if any. Temp to do this watch careful watch it more then just once look at. The detail very wisely you dont over look what very important. Look bolt goingback they all different size and make sure clean your hand are glove are clean and dont wal way from it uncovered for sure if tire in to. You got put it back. If dont part be come up missing and you end up. With bike that not running because you dofnt finished so make sure you got all your part gasket and filter. Before hand
..what?
woah... all that to get the oil filter out? im glad they changed that with the 1300
It's only about a third of the whole process shown.
th-cam.com/video/yOfUwHymYq0/w-d-xo.html
You said the bevel goes inwards when you took out the plates, then when installing the new plates you put the bevel on the outside ? So you installed them the wrong way round.
I have a 2003 V-Star and changing the starter clutch but I've lost one of the small rod that goes into one the 6 springs how can I get a replacement
After installing the new clutch did you adjust the bottom end adjuster..on opposite side of bike...
Great video, thanks
do you HAVE to remove the exhaust? the reason I ask is because my exhaust studs are rusted so bad there's not even threads showing its just a rusted shaft
Best to drain the oil out of the engine first. You got in a real mess there.
Same procedure for a 1100 classic?
Yes
Lights are weak but the music is perfect.
What pipes are those?
Is the clutch different in a custom an clay
Is the clutch different in a custom an classic
I don't think this guy is making videos anymore. Hope he starts back up.
how did you prop it up straight?
James Kang I had a bike stand
Hello brother , i did the clutch like u xplain but now when i put in drive engine turn off
Can u help me with the problem
Mine does that after just an oil change. Try letting it idle a while and get hot to circulate the oil since it’s a wet clutch
No grooves on my plates. Now what?
I stand corrected, the Oil filter goes the opposite way on the 1100. you installed it correctly for the 650. Sorry!
Great Video! 👌
pj what's the torque specs on the springs?
Consult the manual. Please
I have a virago 250 2007 and i need a very detailed tutorial on a virago clutch replacement.. especially detailed info on friction plates placement
How many miles did you get out of that bike before you put the new pads in?
I got all most 17k and thinking on putting in a performance clutch in
Was this your first time
You put the oil filter in backwards.
Cost of clutch kit.
$90 - $140 for factory parts.
White lithium grease on the gasket
if your changing the oil anyway I would just drain through the drain plug then have at er
The music, you really don’t need it, lower volume is better, it’s not bad, just gets annoying and redundant, I am not being critical but just feedback.
No its good 😎
get some T allens dude
caray que no surt l'escapament¡¡¡
You just started with a steel plate. Thats wrong.
No it’s not