From the Facebook Vintage Singer Groups - Singer 66: Feed Dog Problems...
ฝัง
- เผยแพร่เมื่อ 11 ก.ย. 2024
- There was a tremendous amount of discussion across a couple of Facebook groups about a Singer 66 where the feed dog all of a sudden doesn't come up through the needle plate. I put an old "as found" Red Eye into the fixture and we have an anatomy lesson...
New feature on my web page! "My Recommended Tools, Materials, and Suppliers" can be found here:
bobsvsmservice...
New manuals page on my website:
bobsvsmservice...
If you have a nightmare story you would like to share, send me an email to argosybob@gmail.com with "My Worst Nightmare" in the subject line. Include lots of pictures if possible and let me know the gory details!
My website: bobsvsmservice...
Get a coffee mug! The world is so much better with coffee...
bobs-vsm-servi...
Thank you very much indeed ,Bob!Good job.
Fantastic video, simple
Bob, you rescued me again. Thank you
Great analysis, a bit slow getting there but thank you for confirming the situation.
This was wonderful!! Great explanation! I mean, even I could understand!! :) So cool to clear the confusion up!
Glad it was helpful!
Another great video, always reminding of something. Got to feed the dog,
Very clear explanation. Thank you.
good intel. AND, very well explained, as always.
Thank you kindly!
Great video Bob.
Let's say your sewing machine is giving off a metal screech when in motion from the feeddog area;
would it be down the feeddog position or just need more oil somewhere?
It didn't initially make this sound until about ten minutes of use.
Well, that's hard to say, but you can eliminate feed dog adjustments as being the culprit by removing the needle plate and seeing if the sound goes away. Odds are, it's a lubrication issue though, and not the feed dog rubbing against the plate.
@@BobFowlerWorkshop on further inspection there's some scratching on the underside of the presser foot likely from the feed dogs.
Question is, do I adjust the feed dog positioning, the presser foot bar position, or the presser foot bar tensioner bolt?
@@esk8jaimes Scratching on the bottom of the foot is usually because the machine was run with the foot down and no fabric under the foot. You can polish that out using fine grit foam cored nail files. It's not necessarily an indication of the need for presser height adjustment.
I have a 626 the feeding back in forth is feels clunky
In my experience with the various Singer Touch & Sew models, I have found that they aren't what one would call "silky smooth". Most of them that I have handled/owned/used are rather clunky compared to the older straight stitch machines, or the higher end machines such as a 403. I'll probably take a lot of flak for this, but I haven't seen a T&S yet that I really liked. I'm not saying they are bad machines, they're just not my cup of tea.
thank you very much. I have 4 old machines's never sewn a stitch. retired diesel mechanic. have a small machine shop. on my farm in Missouri. want to get a couple of machines working maybe do some motorcycle seats. thanks again maybe we can help you back somedday.
I’m working on a 99 and while I’m familiar with how to set the height, I can’t find any resources on how to adjust the forward and backward adjustment, it’s hitting at the back. Do you happen to have a video for that adjustment on a 99? Thank you.
Rhonda, the information you need is all covered in my video "A Closer Look: Singer 66 Bottom End Adjustments - Sunday Morning Quickies, Ep. 79, April 23, 2023" which you can find here:
th-cam.com/video/UxdtFigLMhc/w-d-xo.html
Even though the video shows a 66, it is exactly the same adjustments for a 99. Hope this helps!
@@BobFowlerWorkshop yay headed over to watch now. Thank you.
@@BobFowlerWorkshop yes sir! I just watched the video and saved it to my files, and now I’m on my way to hopefully repairing my 99. Thank you so much.
@@BobFowlerWorkshop well, I’m at my machine and unfortunately the 99 is a little bit different from the 66 so I’m gonna just take a chance and loosen up what appears to be a set screw on the right hand side. Wish me luck 😬
Glad it helped!
Can I remove a feed dog from model 66 machine?
Sure, but why? FMQ?
@@BobFowlerWorkshop I guess FMQ stands for free motion quitiling. Not for quiting but I want to use a free motion foot. I think I learned which screw that I need to remove from this video, but can’t turn it at all. Any tips to get loosen the old screw that’s stuck?
@@jjoojjoobar Yes, FMQ = Free Motion Quilting. As for the stuck screw... a little penetrating oil + time and it should come loose. NEVER force anything, and if you want to use some tapping to break it free, BE GENTLE!
mouse milk
ps many thanks very clear