ZK-MT21 CS8673e 2.1 Stereo Class-D Amplifier Module REVIEW
ฝัง
- เผยแพร่เมื่อ 25 ธ.ค. 2023
- I test the crap you can buy online, so you don't have to. This 2.1 channel Class-D amp is "OK", but tests on an oscilloscope terrible. I misspoke in the video when I said it doesn't have an LC filter on its outputs, it does have surface-mount inductors. However, it's so badly designed, some switching noise appears on the output making it unmeasurable.
Become a Patreon supporter to help the channel continue to grow: / astroselectronicslab
Follow me on Facebook: / theastro30
Support the channel by donating: paypal.me/TheAstro30
Backup channel: lbry.tv/@TheAstro30:a - วิทยาศาสตร์และเทคโนโลยี
![แฟนแนวใด๋ - ยูริ โตเกียวมิวสิค [OFFICIAL MUSIC VIDEO ]](http://i.ytimg.com/vi/4_XVMuhhbsU/mqdefault.jpg)
I purchased this zh-mt21 these days. I can assure you that it works very well with 2 speakers and subwoofer, and that there is no hiss when it is not playing music. I can't guarantee how long it will last, but for now it's perfect.
Did you put it on an oscilloscope?
I also purchased a 2.1ch amplifier that uses an IC called "CS8673E".
This amp also adds a lot of noise to the music.
I understand how you feel.
Let's throw this thing away! !
At least I'm not the only one experiencing problems with this thing.
I just got the mt21 as well... Hooked it up to an oscilloscope. And switching noise is really there. The way they implemented the filters is truly inadequate...
I got it somewhat looking good by adding my own filters. But it sill looks quite horrible
Thank you
You saved me from DS
Even at 1 ohm nominal load it drives my 2600w quad 6 inch subwoofer to its absolute limit indefinitely all drivers and the twin ten inch passives reach full excursion. The only heat is the power leads running to the 12.6v batteries. For mids and tops I use 4 150w jbls running at a nominal impedance of 2 ohms... phenomenal little amp. Because of its analogue gain it is substantially louder than its big brother the 760w SY-S350H requires twice the voltage.. I wouldn't do what I do with it at any higher voltage tbh.
I might have just got one with a bad batch of the fake output ICs.
In the reference circuit diagram of datasheet, I can see an inductor in the speaker output line, but I can't find an inductor in that product pcb.
Is it possible to output from the Class DMP without an inductor?
I downloaded a ZK-TB21 manual (same controls, same claims) that shows large square type ferrite output inductors and not the tiny smd chip inductors that are on your board.
The ZK-TB21 board uses TPA3116 chips, who knows what chip type is on your board ??.
Also YOUR board defaults to BT operation when the 3.5mm input is unplugged and you may need to fit a solder bridge to connect the pcb BT antenna or fit an external antenna across the ANT pads on the pcb as shown in the ZK-MT21 manual.
I saw some kits says it has the tpa3116 d2 but when you remove the heatsink and you will see that same ic. It does not look like the real tpa3116 d2, but instead they mark the ic with tpa3116.
They're pretty much rubbish, to be honest...
Class D tpa3116 d2 Please tell me if this IC is good when available
It is, when it's not faked. This is the problem with so many components being manufactured in China (especially obsolete ones), %90 of them are fake/junk.
Any idea how to repair not turning on? Cooling fans heat up fast but no power
On what amplifier? This one? It doesn't have fans.
@@AstrosElectronicsLab cooling fins* yes this exact model
@@KAOSshortyrip ah, right. In that case, it's most likely the chips themselves. I don't think these modules are even tested before they're sold! You could try replacing the chips, as they're getting hot indicates an internal short, or just request your money back.
These little amps sound awesome, but I'm not so sure about your connections and testing methods.
It's connected correctly, as per the silk screen on top
You probably bought one with a fake chip. These chips are notoriously copied. And since lot of noobs building audio systems can't distinguish between 60W and 100W subwoofer, it's easy to sell it to them. And to be honest, it will sound and play reasonably good for that price.
Just for the next time, please use different scope. These "build your own scopes" are maybe even worse than the amplifier you are testing. If you want something cheap and reliable you can try something similar to ADS1013D. Simple reliable and surprisingly good Chinese oscilloscope.
Is the speaker or a dummy load connected during the scope testing ?......a load is required to load the output reconstruction filters, elsewise you can expect high levels of pulse noise.
"Class AB amplifiers can run without load.
Class D amplifiers should not run without load because the load is used to damp the LC output filter and prevent the filter-chokes from generating excessive voltages. Some class D amplifiers may survive running without a load, in particular if they are protected with catch-diodes."
Yes
I did see some surface mount Inductors on the outputs buy the ic but I don't think there adequate. Definitely need some improvement. And I agree when testing any classes of amplifier a outputs should be properly loaded.
@@AstrosElectronicsLab You need this - www.ti.com/lit/an/sloa107/sloa107.pdf
@@Amplified208 Do some searching on "measuring class d amplifiers" and you will find info you need.
The takeaway is that the spikes on the output are normal and the loudspeaker inductance integrates the spikes so you don't get to hear them.
Also you should be using scope in two probes differential mode to see what is actually across the loudspeaker.
@@ericmc6482 I have studied many designs on class d and proper scope techniques.but a bad design is a bad design now matter how you measure. Im also not a fan of cheap class d design for that reason. Now the Fosi audio Class d amps is done beautifully.
Get tb 21 it has the real ic
Looks like a noise loop
hi sir i live in india this has arrived in india now tell me can i buy this or not i don't understand your technical
Not good according the review.
They are selling this module with original chips u took fake chips in auction
Well, this wasn't from an auction, just a regular sale. But, it wouldn't surprise me if the ICs are fake.
tb21 is way better..
I just bought it has really tpa 3116 d2 ic
@@faristvtechtips8043 well i got scammed... my has the chinese mosfets but with nice inductors on the output... and has some power issues.... after on third of volume the satelites distort like hell... and im using a 20v 4.5A powersupply....
Wow, a poor design. 😂 which is a shame a proper LC is definitely needed lol
Yep. He offered me 3 bucks reimbursement if I changed my review from neutral to positive
@AstrosElectronicsLab lol well tell him to send proper schematics with components for proper RD, lol, but I don't blame them for wanting a good review. But in this day and age, you get what you pay for, unfortunately. It is not like your 15watt×2 project RD IS CRUCIAL
th-cam.com/users/shortsrecRM7ue6ds?si=cXv56PT5RyP-L0lu
This is one of my old projects on my old youtube page. I did this class AB Amplifier. Great kit from LJM L10 kit from Amazon. I simulated this circuit on a android program called proto spent along time matching components but well worth the effort. The sound was outstanding.
Not worth the $2
an absolute dog
What, the amp? Yeah, it's pretty much junk.
yeah it's a dumpster fire@@AstrosElectronicsLab