If you are still annoyed by the speed limit of electric bicycles, watch this video and you will get what you want . I-FEN Ebike factory ,Waatro Ebike .
Hello Friend all of these LCDS have similar operations on LCDS, you can look at other reviews of my previous replies and you can figure out ways to unlock your speed
@freebooterbiker This is the best way ,if no the throttle,you can release this speed by the setting on your lcd display,see this : Model S866 and M5 No limited Speed Seeting: P08 codec : Speed limit: range 0-100km / H, 100 means no speed limit, The input data here represents the maximum operating speed of the vehicle: for example, input 25, indicating that the maximum operating speed of the vehicle will ,there will be a setting code on the display and can release the limited speed.
Hi Bro,your ebike has a powerful motor and battery,so you can unlock your speed to 28MPH at least ,you can try this way first(If it doesn't work, it won't affect any of your existing systems) .If this way cant work on your ebike ,pls try to unlock you speed with below way : 1.Pree M(Power) to power on the lcd display 2.Press and hold [+] & [-] for 2 seconds to enter the setup interface. (If any pass code required(pass word "6666") ,Press + to change the 0 to 6 and Press M to switch to anothe 0.Press M to enter the setup interface) 3.Single press [M]/"Power" to cycle through the following modes 4.Press "M"/"POWER" to switch the option to P08 . 5.Setting the speed to 100 to unlock the max speed 6.Long press "M"/"POWER" to power off ,and workable after power on again. P08: Speed limit: range 0-100km / H, 100 means no speed limit, The input data here represents the maximum operating speed of the vehicle: for example, input 25, indicating that the maximum operating speed of the vehicle will not exceed 25km/h; Drive speed maintained at set value,
Hello I really need to know how to remove the speed limiter on E-Mountainbike MONTIS EM 1726 by FISCHER with bafang display. Can u tell me how or if its possible? The e bike is really fast but its limited at 25-27kmh
I have an Excider E-bike that randomly started only going 25km/h when it previously did 50km/h. This video didn't work for me, and I have no clue how to fix it.
That looks like a hyboy P6, is it ? Also I heard if you take one loop wire off the controller this will unlock it as well, do you know of this ? Cheers from Canada !
Hello Bro ,I just noted this ebike has only 350W power motor ,and the max speed cant be more than 32km/h ,Any higher speed ebike have to be higher motor with 500W at least ,it has a higher torque and battery .so you can try some bigger powerful ebikes .We have some stocks in USA warehouse and our China warehouse if you have a plan to change your ebike .contact us now via info@i-fen.com or whatsapp +86 134 8042 0332
Hi Bro,the motor of your ebike is not powerful with only 36V 350W ,so cant be higher speed ,you can try some higher powerful ebike with 750W or 1000W ebikes ,and max speed can be higher to 50km/h ,tell us if you have the plan to buy one powerful ebike ,we have warehouse in US and China
For me it's a challenge, I have a Hiboy P6 and I would like to unlock the speed limit but I'm afraid this technique won't apply to the P6. How to unlock the speed limit of the Hiboy P6 so please tell me? Thank you!
Hi Bro ,pls try to unlock your speed on the LCD Display , See below: 1.Power on the lcd display 2.Press and hold [+] & [-] for 2 seconds to enter the setup interface. 3.Press + to change the P0 to P08 and Press Power key to switch to speed option 4.Changing the speed from 25 or 32 to 100km/h 5.Once finished ,Press and hold [+] & [-] for 2 seconds to exit setup sureface
Sorry for the question, but I'm actually afraid of damaging the bike. Are you sure this will work, because I want to try it, but like I said, I'm afraid? Thank you
@@ramonurbaneja did it damage the bike at all been wondering about doing this myself on my own p6 but some people online said it could break the bikes controller and since you did do this what was the new top speed?
They gave me a 2017 Riese and Muller Charger 4 GT touring HS with dual bosch batteries for 100 mile range. On the screen it has a top recorded speed of 55 MPH but the most I get in Turbo mode is 20 MPH, maybe 22 if I pedal hard This has no throttle Can this also be unlocked to go faster?
Any idea how to do this on RAWBIKE u2? It's got the Dapu M155 engine if that helps. There's an option in the service menu but I can't select it so it seems to be software locked. the bike is made to go atleast 32km/h on throttle alone.
Hey Bro ,yes ,i noted this and your ebike is 36V 14AH 500W ,actually the real motor of your ebike should be 350W(fake 500W printed) ,so 32km/h is the max speed on this SPEC ,we have to consider the battery and motor with 48V at least ,
Hi Bro,your ebike has a powerful motor and battery,so you can unlock your speed to 28MPH at least,But cause of your battery limited ,the range of your ebike will be shorter if you release your speed to a higher . you can try this way first(If it doesn't work, it won't affect any of your existing systems) .If this way cant work on your ebike ,pls try to unlock you speed with below way : see below way: 1.Pree M to power on the lcd display 2.Press and hold [+] & [-] for 2 seconds to enter the setup interface. (If any pass code required(pass word "6666") ,Press + to change the 0 to 6 and Press M to switch to anothe 0.Press M to enter the setup interface) 3.Single press [M] to cycle through the following modes 4.Press M to switch the option to P08 . 5.Setting the speed to 100 to unlock the max speed 6.Long press M to power off ,and workable after power on again.
Long press "+" and "-"to start setting parameters, such as wheel size(inch), background luminance… (Refer toP00-P19)On the setting interface, shortly + or - press , or to plus/minus value. Parameters would be shining aftermodifying, choose the ones you prefer,a. Long press"M" to save the value, the shining would stop.b. Shortly press "M"to shift to the next parameter, and to save current values at the same time.c. Press "+" and "--" to exit setting parameters and to save values. If not press these buttons, it would exit andsave parameters modified automatically 10s later. P00: Restore Factory Settings Set this value to 10 and switch to next setting,the display items will show all contents and restoreoriginal factory settings.P01 Background luminance. 1 is the darkest, 3 is the brightestP02 Unit of the mileage. 0 is KM, 1 is MILEP03 Voltage grades. 24V, 36V, 48V. The original voltage is 36V.P04 Sleep time. 0 never sleep, other numbers stand for the sleep time (1-60 min).P05 PAS grades. 0, 3 grades mode: 1 grade 2V, 2 grade 3V, 3 grade 4V 1, 5 grades mode: 1 grade 2V, 2 grade 2.5V, 3 grade 3V, 4 grade 3.5V, 5 grade 4VP06 Wheel size. Unit: inch. Precision: 0.1P07 Speed measuring magnet. Range: 1-100P08 Speed limit. Range: 0-50km/h, 50 means without limit No-Communication Status (controlled by the meter): when the real speed is over the ones we set, the meter would shut offPWM output; when less than the speed we set, the meter would turn on PWM output automatically, the driving speed would be±1km/h; (Speed limit is for PAS, not for Throttle) Communication Status (controlled by the controller): The driving speed keeps same with the ones we set. Random error:±1km/h. (Speed limit is for both PAS and Throttle)Notes: These data are based on KM. When changing KM to Mile, the speed value on the screen would convert to correct Milesautomatically, but if you do not change the setting of speed limit from KM to Mile, it would be different from the real speed limit inMile
G51 LCD ,see below: Long press "+" and "-"to start setting parameters, such as wheel size(inch), background luminance… (Refer toP00-P19)On the setting interface, shortly + or - press , or to plus/minus value. Parameters would be shining aftermodifying, choose the ones you prefer,a. Long press"M" to save the value, the shining would stop.b. Shortly press "M"to shift to the next parameter, and to save current values at the same time.c. Press "+" and "--" to exit setting parameters and to save values. If not press these buttons, it would exit andsave parameters modified automatically 10s later. P00: Restore Factory Settings Set this value to 10 and switch to next setting,the display items will show all contents and restoreoriginal factory settings.P01 Background luminance. 1 is the darkest, 3 is the brightestP02 Unit of the mileage. 0 is KM, 1 is MILEP03 Voltage grades. 24V, 36V, 48V. The original voltage is 36V.P04 Sleep time. 0 never sleep, other numbers stand for the sleep time (1-60 min).P05 PAS grades. 0, 3 grades mode: 1 grade 2V, 2 grade 3V, 3 grade 4V 1, 5 grades mode: 1 grade 2V, 2 grade 2.5V, 3 grade 3V, 4 grade 3.5V, 5 grade 4VP06 Wheel size. Unit: inch. Precision: 0.1P07 Speed measuring magnet. Range: 1-100P08 Speed limit. Range: 0-50km/h, 50 means without limit No-Communication Status (controlled by the meter): when the real speed is over the ones we set, the meter would shut offPWM output; when less than the speed we set, the meter would turn on PWM output automatically, the driving speed would be±1km/h; (Speed limit is for PAS, not for Throttle) Communication Status (controlled by the controller): The driving speed keeps same with the ones we set. Random error:±1km/h. (Speed limit is for both PAS and Throttle)Notes: These data are based on KM. When changing KM to Mile, the speed value on the screen would convert to correct Milesautomatically, but if you do not change the setting of speed limit from KM to Mile, it would be different from the real speed limit inMile
Hi Bro ,do you know the motor of your ebike ? i only found the 350W Eunoray UHVO mountain ebike ,if that ,this ebike cant be higher speed ,you have to buy one higher motor with 500W at least ,you can contact us if you are interested in this higher power ebike in USA warehouse ,we have the 750W and 1500W ebikes in USA warehouse,email:info@i-fen.com ,whatsapp:+86 13480420332
Hey bro i have colorway bk29 but i took off the throttle , csn i do this method without the throttle does it work , what can i do to make it faster , appriciate u
Yes ,pls unlock your speed on the lcd display: 1.Pree M(Power) to power on the lcd display 2.Press and hold [+] & [-] for 2 seconds to enter the setup interface. 3.Single press [M]/"Power" to cycle through the following modes 4.Press "M"/"POWER" to switch the option to P08 . 5.Pree +/- to Set the speed to 100 to unlock the max speed 6.Long press "M"/"POWER" to power off ,and workable after power on again. P08: Speed limit: range 0-100km / H, 100 means no speed limit, The input data here represents the maximum operating speed of the vehicle: for example, input 25, indicating that the maximum operating speed of the vehicle will not exceed 25km/h; Drive speed maintained at set value,
@@I-FENEbike my speed limit is in setup number 3 , and it cant go more than 45kmh in the screen ,but when i drive it goes just 25kmh , how to make in my screen the speed limit till 100kmh ?
This ebike has only 350W motor with 30N Torque ,it cant be faster any more,Bro you have to try one 500W motor at least ,we have some off road ebike in warehouse
Hi Bro ,your ebike is the city ebike with only single speed and no throttle ,so no ways to unlock the speed ,you can try some throttle version ebikes with higher powerful motor ,
Hi Bro ,did you try this way on your ebike ? You can see below the changing way on your lcd display: See below to unlock your max speed: 1.Long Press M to turn on the lcd display , 2.Press and hold [+] & [-] for 2 seconds to enter the setup interface 3.If your ebike required the Enter passwork ,Enter the Password Code:"6666" (Our ebike),Press "+" or "-" to change the "0000" to "6666",Each "6" press M to move to next . 4.Single press [M] to cycle through the modes 5.Press M to set the menu to P08 6.P08-Set to 50-100 to unlock the max speed 7.Press and hold [+] & [-] for 2 seconds to exit the setup interface To Turn lights on/off:
Hi Bro,This controller has a same way to reset , see below way: you can unlock the max speed on the Display ,see below the cooperation: 1.Press M to power On , 2.Press and hold [+] & [-] for 2 seconds to enter the setup interface. 3.Press + to choose the option to 4 Set LS 4.Single press [M] to Enter or confirm the Option 4 ,and setting the speed to max you required. 5.Press M to confirm ths current speed .
Will This Work On METAKOO Cybertrack 100 26" Electric Mountain Bike Does this Increase the speed which is capped at 20MPH because of the regulator. What does you mean by unlock speed
Hey Bro ,your ebike has a powerful motor with 500W ,but your battery is too small(7.8AH) to support a higher speed ,it will be very short range when you set it to a higher speed .
Hi Bro,your ebike has a powerful motor and battery,so you can unlock your speed to 28MPH at least ,you can try this way first(If it doesn't work, it won't affect any of your existing systems) .If this way cant work on your ebike ,pls try to unlock you speed with below way : see below way: 1.Pree M to power on the lcd display 2.Press and hold [+] & [-] for 2 seconds to enter the setup interface. (If any pass code required(pass word "6666") ,Press + to change the 0 to 6 and Press M to switch to anothe 0.Press M to enter the setup interface) 3.Single press [M] to cycle through the following modes 4.Press M to switch the option to P08 . 5.Setting the speed to 100 to unlock the max speed 6.Long press M to power off ,and workable after power on again.
Hi Bro,you can try this way to release first ,if cant work,see below another way: you can unlock the max speed on the Display ,see below the cooperation: Press and hold [+] & [-] for 2 seconds to enter the setup interface. Single press [M] to cycle through the following modes Press and hold [+] & [-] for 2 seconds to exit the setup interface To Turn lights on/off: Turn on the LCD and hold the plus (+) button Different set menu options: P08-Set to 100 to unlock the max speed
Hi Bro,you can try this way to unlock your speed first ,if cant work, see below another way: you can unlock the max speed on the Display ,see below the cooperation: Press and hold [+] & [-] for 2 seconds to enter the setup interface. Single press [M] to cycle through the following modes Press and hold [+] & [-] for 2 seconds to exit the setup interface To Turn lights on/off: Turn on the LCD and hold the plus (+) button Different set menu options: P08-Set to 100 to unlock the max speed
@@JShawnPaul Hi Bro,yes ,your ebike has a powerful motor and battery,so you can unlock your speed to 28MPH at least ,you can try this way first(If it doesn't work, it won't affect any of your existing systems) .If this way cant work on your ebike ,pls try to unlock you speed with below way : see below way: 1.Pree M to power on the lcd display 2.Press and hold [+] & [-] for 2 seconds to enter the setup interface. (If any pass code required(pass word "6666") ,Press + to change the 0 to 6 and Press M to switch to anothe 0.Press M to enter the setup interface) 3.Single press [M] to cycle through the following modes 4.Press M to switch the option to P08 . 5.Setting the speed to 100 to unlock the max speed 6.Long press M to power off ,and workable after power on again.
@@MalachiReynalds 350W Motor ,the motor power limited the speed to max 32KM/H ,so the max speed cant be high ,you can try some of our ebiks with 750W or 1500W motor ,we have warehouse in USA and also in China factory ,you can contact us via info@i-fen.com
@@I-FENEbike I figured it out after a few hours in the garage, the motor controller limits my 36 volt battery at 29 volts so I’m probably just gonna take the motor controller to like a U break I fix and see if they can take it off
Hi Bro,Sorry for our delay to reply pls try this way to unlock your speed : 1.Pree M to power on the lcd display 2.Press and hold [+] & [-] for 2 seconds to enter the setup interface. (If any pass code required(pass word "6666") ,Press + to change the 0 to 6 and Press M to switch to anothe 0.Press M to enter the setup interface) 3.Press M to switch the option to P08 . 4.Press +/- to Set the speed to 100 to unlock the max speed 5.Long presshold [+] & [-] for 2 seconds to exit and save the speed
Hello Bro ,I just noted this ebike has only 250W(real 350W motor) power motor ,so the max speed cant be more than 32km/h ,Any higher speed ebike have to be higher motor with 500W at least ,it has a higher torque and battery .so you can try some bigger powerful ebikes .We have some stocks in USA warehouse and our China warehouse if you have a plan to change your ebike .contact us now via info@i-fen.com or whatsapp +86 134 8042 0332
G51 LCD: Long press "+" and "-"to start setting parameters, such as wheel size(inch), background luminance… (Refer toP00-P19)On the setting interface, shortly + or - press , or to plus/minus value. Parameters would be shining aftermodifying, choose the ones you prefer,a. Long press"M" to save the value, the shining would stop.b. Shortly press "M"to shift to the next parameter, and to save current values at the same time.c. Press "+" and "--" to exit setting parameters and to save values. If not press these buttons, it would exit andsave parameters modified automatically 10s later. P00: Restore Factory Settings Set this value to 10 and switch to next setting,the display items will show all contents and restoreoriginal factory settings.P01 Background luminance. 1 is the darkest, 3 is the brightestP02 Unit of the mileage. 0 is KM, 1 is MILEP03 Voltage grades. 24V, 36V, 48V. The original voltage is 36V.P04 Sleep time. 0 never sleep, other numbers stand for the sleep time (1-60 min).P05 PAS grades. 0, 3 grades mode: 1 grade 2V, 2 grade 3V, 3 grade 4V 1, 5 grades mode: 1 grade 2V, 2 grade 2.5V, 3 grade 3V, 4 grade 3.5V, 5 grade 4VP06 Wheel size. Unit: inch. Precision: 0.1P07 Speed measuring magnet. Range: 1-100P08 Speed limit. Range: 0-50km/h, 50 means without limit No-Communication Status (controlled by the meter): when the real speed is over the ones we set, the meter would shut offPWM output; when less than the speed we set, the meter would turn on PWM output automatically, the driving speed would be±1km/h; (Speed limit is for PAS, not for Throttle) Communication Status (controlled by the controller): The driving speed keeps same with the ones we set. Random error:±1km/h. (Speed limit is for both PAS and Throttle)Notes: These data are based on KM. When changing KM to Mile, the speed value on the screen would convert to correct Milesautomatically, but if you do not change the setting of speed limit from KM to Mile, it would be different from the real speed limit inMile
Hi Bro,you can try this way to release first , if cant work,you can unlock the max speed on the Display , see below the cooperation: 1.Pree M to power on the lcd display 2.Press and hold [+] & [-] for 2 seconds to enter the setup interface. (If any pass code required(pass word "6666") ,Press + to change the 0 to 6 and Press M to switch to anothe 0.Press M to enter the setup interface) 3.Single press [M] to cycle through the following modes 4.Press M to switch the option to P08 5.Setting the speed to 100 to unlock the max speed 6.Long press M to power off ,and workable after power on again.
Hi Bro ,i noted this ebike have set to 45KM/H ,this is a high speed now ,so if you requiring a highest speed ,pls try below the way : LCD Display cooperation: Press and hold [+] & [-] for 2 seconds to enter the setup interface. Single press [M] to cycle through the following modes Press and hold [+] & [-] for 2 seconds to exit the setup interface To Turn lights on/off: Turn on the LCD and Press the M to set to the P08 P08-Set to 100 to unlock the max speed
Hello Bro ,i just checked your ebike ,it seems that your ebike is the 36V 8AH 250W ,this is a basic ebike with low speed version ,so you cant set this ebike to a higher speed ,next time you can buy one a higher powerful moto with 48V 500W 13AH at least ,then you can have a higher speed to 28MPH at least ,we have stocks in USA warehouse ,EU warehouse and Chian Warehouse ,welcome your inquiry.
Hi Bro ,i noted the max speed of this ebike was set to 28MPH ,and your ebike is 48V 500W motor ,so this speed is enough based on this SPEC ,dont advise to set higher
Hi Omar ,should work ,pls try it with this way or below the cooperation: Press and hold [+] & [-] for 2 seconds to enter the setup interface. Single press [M] to cycle through the following modes Press and hold [+] & [-] for 2 seconds to exit the setup interface To Turn lights on/off: P08-Set to 100 to unlock the max speed
Hi Bro,I checked your ebike ,it has a powerful motor with 750W ,so it is no problem to set it to a higher speed ,see below the way on your lcd display:(cause of the small battery 10.4AH ,the range of ebike will be shorter when you set to a higher speed ,next time you can buy one higher battery to 13-18AH) you can unlock the max speed on the Display ,see below the cooperation: 1.Press M to power On , 2.Press and hold [+] & [-] for 2 seconds to enter the setup interface. 3.Press + to choose the option to 4 Set LS 4.Single press [M] to Enter or confirm the Option 4 ,and setting the speed to max you required. 5.Press M to confirm ths current speed
Hi ,you can try this way to release first ,if cant work,see below another way: you can unlock the max speed on the Display ,see below the cooperation: Press and hold [+] & [-] for 2 seconds to enter the setup interface. Single press [M] to cycle through the following modes Press and hold [+] & [-] for 2 seconds to exit the setup interface To Turn lights on/off: Turn on the LCD and hold the plus (+) button Different set menu options: P08-Set to 100 or 67 to unlock the max speed
Hello bro ,sorry ,your ebike is too basic with only 250W or 350W motor(this torque can be only supported 30KM/H OR 25km/h),cant be higher speed ,if you are looking for a higher speed ebike ,we have some 750W-1500W ebike in stock in USA warehouse and our China warehouse ,you can try it .
Pls try this way on your lcd display : 1.Long Press M to turn on the lcd display , 2.Press and hold [+] & [-] for 2 seconds to enter the setup interface 3.Enter the Password Code:"6666" (Our ebike),Press "+" or "-" to change the "0000" to "6666",Each "6" press M to move to next . 4.Single press [M] to cycle through the modes 5.Press M to set the menu to P08 6.P08-Set to 50-100 to unlock the max speed 7.Press and hold [+] & [-] for 2 seconds to exit the setup interface To Turn lights on/off:
Hello bro ,you can try it with this way ,this Ebike has a big power and the real speed can be 45km/h at least.if this way is not working ,you can tell us
@@KaftiBrizola P08: Speed limit: range 0-100km / H, 100 means no speed limit, The input data here represents the maximum operating speed of the vehicle: for example, input 25, indicating that the maximum operating speed of the vehicle will not exceed 25km/h; Drive speed maintained at set value, this is the system process If cant work,do you think you can ask this from your seller ?
Think is shortcut for the TIRE DIaMETER! The bike is traveling the same speed as always, but diameyer lowered makes the wheel rotation increase! Those of yaz with half a brain can understand what I'm saying! 😊
Hi Bro,you can try this way to release first ,if cant work,see below another way: you can unlock the max speed on the Display ,see below the cooperation: Press and hold [+] & [-] for 2 seconds to enter the setup interface. Single press [M] to cycle through the following modes Press and hold [+] & [-] for 2 seconds to exit the setup interface To Turn lights on/off: Turn on the LCD and hold the plus (+) button Different set menu options: P08-Set to 100 to unlock the max speed
48V 750W ,you can tell us if you have the plan to buy one powerful ebike ,we have warehouse in US and China ,max speed can be 45-50KM/H ,info@i-fen.com
Hi Bro,you can try this way to release first ,if cant work,see below another way: you can unlock the max speed on the Display ,see below the cooperation: Press and hold [+] & [-] for 2 seconds to enter the setup interface. Single press [M] to cycle through the following modes Press and hold [+] & [-] for 2 seconds to exit the setup interface To Turn lights on/off: Turn on the LCD and hold the plus (+) button Different set menu options: P08-Set to 100 to unlock the max speed
Hi Bro ,yes ,you can try to unlock the speed with this way ,but some suppliers will change the system ,so you can do below way if this video is not working : see below the cooperation: Press and hold [+] & [-] for 2 seconds to enter the setup interface. Single press [M] to cycle through the following modes Press and hold [+] & [-] for 2 seconds to exit the setup interface To Turn lights on/off: Turn on the LCD and hold the plus (+) button Different set menu options: P08-Set to 100 to unlock the max speed
@@I-FENEbike I don’t know the model of display but I can send you the picture! m.ks.hc-cdn.com/site-ancheer/2023/09/a0d4756f-16ff-47f5-af2c-df4b07b7a415.jpg
Hi Bro,you can try this way to release first ,if cant work,see below another way: you can unlock the max speed on the Display ,see below the cooperation: Press and hold [+] & [-] for 2 seconds to enter the setup interface. Single press [M] to cycle through the following modes Press and hold [+] & [-] for 2 seconds to exit the setup interface To Turn lights on/off: Turn on the LCD and hold the plus (+) button Different set menu options: P08-Set to 100 to unlock the max speed
Hi Bro,i checked this ebike ,this lcd display should be worked ,you can try this way to release first ,if cant work,see below another way: you can unlock the max speed on the Display ,see below the cooperation: Press and hold [+] & [-] for 2 seconds to enter the setup interface. Single press [M] to cycle through the following modes Press and hold [+] & [-] for 2 seconds to exit the setup interface To Turn lights on/off: Turn on the LCD and hold the plus (+) button Different set menu options: P08-Set to 100 to unlock the max speed
@@weilinwilliamluo Hi Bro ,i just double cheked this ebike and noted the motor power is only 350W ,so the max speed cant be higher than 20mph ,we have to buy one ebike with motor 500W at least ,if you have the plan to try some bigger power ebike ,you can contact us via info@i-fen.com ,we have ebikes in USA warehouse with 750W to 1500W power and max speed can be 45-50KM/H
He’s trying to show you how you can set it higher. Mine is set at 25km and, I’d like it to go up to 32km. But, it’s factory set for 25 and it’s apparently password protected.
@@cuernavacadave I feel your pain. Mine is set to 25mph, and at full throttle the limiter kicks on and off to keep it from reaching higher mph. Mine might be password protected, or just set in the firmware to restrict itself or both. I plan on figuring out how to do it. If i do i'll get back to you and maybe my method will help you.
@@cuernavacadave Hi Bro, you can try to enter into your lcd display ,for example ,the lcd display password code of our ebiks are "6666" : See below the user guider: 1.Long Press M to turn on the lcd display , 2.Press and hold [+] & [-] for 2 seconds to enter the setup interface 3.Enter the Password Code:"6666" (Our ebike),Press "+" or "-" to change the "0000" to "6666",Each "6" press M to move to next . 4.Single press [M] to cycle through the modes 5.Press M to set the menu to P08 6.P08-Set to 50-100 to unlock the max speed 7.Press and hold [+] & [-] for 2 seconds to exit the setup interface To Turn lights on/off:
Hi Bro ,i checked the spec of your ebike,it seems that it is only 250W/350W of ebike ,this motor is not powerful ,cant be higher speed ,you can tell us if you have any plan to buy one higher powerful ebike with 500W-1000W ,
Hi Bro,you can try this way to release first ,if cant work,see below another way: you can unlock the max speed on the Display ,see below the cooperation: Press and hold [+] & [-] for 2 seconds to enter the setup interface. Single press [M] to cycle through the following modes Press and hold [+] & [-] for 2 seconds to exit the setup interface To Turn lights on/off: Turn on the LCD and hold the plus (+) button Different set menu options: P08-Set to 100 to unlock the max speed
@@philcangametourtv Hi Bro ,this one cant be higher speed ,cause it is only 250W/350W motor .you have to buy one 500W motor and torque can be stronger to 45KM/H-50KM/H
Hi Bro,you can Watch our another video"how to change the KM to MPH" , you can change all via your LCD display ,see below: Different set menu options: “SET 1” - Press [-] and the Trip will reset to 0. “SET 2” - Set the max speed. “SET 3” - Set the wheel size. “SET 4” - Set the bike in either MPH or KPH “SET 5” - Pedal Assist Limiter - on/off “SET 6” - Throttle Limiter - on/off See below to unlock your max speed: 1.Long Press M to turn on the lcd display , 2.Press and hold [+] & [-] for 2 seconds to enter the setup interface 3.Enter the Password Code:"6666" (Our ebike),Press "+" or "-" to change the "0000" to "6666",Each "6" press M to move to next . 4.Single press [M] to cycle through the modes 5.Press M to set the menu to P08 6.P08-Set to 50-100 to unlock the max speed 7.Press and hold [+] & [-] for 2 seconds to exit the setup interface To Turn lights on/off:
Hi Bro,pls try this way on your lcd display: 1.Long Press M to turn on the lcd display , 2.Press and hold [+] & [-] for 2 seconds to enter the setup interface 3.Enter the Password Code:"6666" (Our ebike),Press "+" or "-" to change the "0000" to "6666",Each "6" press M to move to next . 4.Single press [M] to cycle through the modes 5.Press M to set the menu to P08 6.P08-Set to 50-100 to unlock the max speed 7.Press and hold [+] & [-] for 2 seconds to exit the setup interface To Turn lights on/off:
Hi Bro ,your ebike is similar like our off-road fat tire ebike EMSx Series,this style can be 45KM/H(250W marked on motor ,the real torque should be 55Nm=500W motor) ,But cause of the EU standard ,the max speed was set to 25km/h ,you can reset it on your LCD if you prefer a higher speed (it .is better to follow local rules and keep this speed).below is our setting way on the speed on our ebikes. Find P08 codec : Speed limit: range 0-100km / H, 100 means no speed limit, The input data here represents the maximum operating speed of the vehicle: for example, input 25, indicating that the maximum operating speed of the vehicle will ,there will be a setting code on the display and can release the limited speed.
Hello Friend all of these LCDS have similar operations on LCDS, you can look at other reviews of my previous replies and you can figure out ways to unlock your speed
I cannot express to you how much I love you for making this video. May your best dreams come true.
Thank you Bro
mine self destructed like an episode of inspector gadget
you can ask us next time before doing this😁
That’s crazy bro it worked for me 😂 I got a colorway 750w thanks to you it runs 55 mph
Colorway and hitway are workable ,we produced the ebike for them😀
lie
That's too fast, lol.
@@willdorten6867 Yes ,indeed if we unlock this max speed ,we can keep the setting speed to 25KM/H or 32KM/H
@@I-FENEbikecap
I did this in my big sur grew wings and I started to lift off of the ground
Great
Kewl 😂
Hello! If the e bike doesnt have a throttle but only pedals ..what do you do instead ??,
hahahah sameee
you get it ?
@freebooterbiker This is the best way ,if no the throttle,you can release this speed by the setting on your lcd display,see this :
Model S866 and M5 No limited Speed Seeting: P08 codec :
Speed limit: range 0-100km / H, 100 means no speed limit,
The input data here represents the maximum operating speed of the vehicle: for example, input 25, indicating that the maximum operating speed of the vehicle will
,there will be a setting code on the display and can release the limited speed.
Get a new Ebike
Can you do this with a totguard 27.5"??????
Hi Bro,your ebike has a powerful motor and battery,so you can unlock your speed to 28MPH at least ,you can try this way first(If it doesn't work, it won't affect any of your existing systems) .If this way cant work on your ebike ,pls try to unlock you speed with below way :
1.Pree M(Power) to power on the lcd display
2.Press and hold [+] & [-] for 2 seconds to enter the setup interface. (If any pass code required(pass word "6666") ,Press + to change the 0 to 6 and Press M to switch to anothe 0.Press M to enter the setup interface)
3.Single press [M]/"Power" to cycle through the following modes
4.Press "M"/"POWER" to switch the option to P08 .
5.Setting the speed to 100 to unlock the max speed
6.Long press "M"/"POWER" to power off ,and workable after power on again.
P08: Speed limit: range 0-100km / H, 100 means no speed limit,
The input data here represents the maximum operating speed of the vehicle: for example, input 25, indicating that the maximum operating speed of the vehicle will not exceed 25km/h; Drive speed maintained at set value,
does it stay at that top speed forever or until you next turn it off and back on?
Stay the top speed once unlock this
Hello I really need to know how to remove the speed limiter on E-Mountainbike MONTIS EM 1726 by FISCHER with bafang display. Can u tell me how or if its possible? The e bike is really fast but its limited at 25-27kmh
Sorry Bro ,we have no idea how to set the Bafang LCD Display .
Does this work on all bikes? How do you do it on a Bianchi commuter bike without a throttle?
I have an Excider E-bike that randomly started only going 25km/h when it previously did 50km/h. This video didn't work for me, and I have no clue how to fix it.
What about a Windone e2?
will it work on my CYCROWN CycRun?
So I have a go trax e-bike that doesn’t have a speedometor can u post a video or showcase on how it would work on that bike?
Hi Bro ,do you know the model name of your ebike ? i will check and find out one way for you
That looks like a hyboy P6, is it ? Also I heard if you take one loop wire off the controller this will unlock it as well, do you know of this ? Cheers from Canada !
Hello there! I was wondering if you know anything about ebikes that don't have a screen to access the options :( You know a way around?
Will this work with happyrun g60? Please answer soon
hi ive been trying to figure out how to do this on populo curve 20’ ebike. does anyone know how?
will it work on an ANCHEER Sunshine AT1 if so how
Hello Bro ,I just noted this ebike has only 350W power motor ,and the max speed cant be more than 32km/h ,Any higher speed ebike have to be higher motor with 500W at least ,it has a higher torque and battery .so you can try some bigger powerful ebikes .We have some stocks in USA warehouse and our China warehouse if you have a plan to change your ebike .contact us now via info@i-fen.com or whatsapp +86 134 8042 0332
Will this work for a rattan e-bike
Would this work on a 750W cycrown?
Hi Bro ,can you provide your ebike model name ,i will provide you a better way to unlock the speed via the lcd display
Does this work on fun hang mountain e bike?
Will this work or what can I do for my Nakto Fat Tire Cruiser??? Please help me 😁
Hi Bro,the motor of your ebike is not powerful with only 36V 350W ,so cant be higher speed ,you can try some higher powerful ebike with 750W or 1000W ebikes ,and max speed can be higher to 50km/h ,tell us if you have the plan to buy one powerful ebike ,we have warehouse in US and China
For me it's a challenge, I have a Hiboy P6 and I would like to unlock the speed limit but I'm afraid this technique won't apply to the P6. How to unlock the speed limit of the Hiboy P6 so please tell me? Thank you!
Hi Bro ,pls try to unlock your speed on the LCD Display ,
See below:
1.Power on the lcd display
2.Press and hold [+] & [-] for 2 seconds to enter the setup interface.
3.Press + to change the P0 to P08 and Press Power key to switch to speed option
4.Changing the speed from 25 or 32 to 100km/h
5.Once finished ,Press and hold [+] & [-] for 2 seconds to exit setup sureface
Sorry for the question, but I'm actually afraid of damaging the bike. Are you sure this will work, because I want to try it, but like I said, I'm afraid? Thank you
@I-FENEbike Ok, try, but only get up to 4 not up to 8...
@@ramonurbaneja Yes,i got the same reply from this brand ,it seems that this brand locked the system and can’t be changed by the users
@@ramonurbaneja did it damage the bike at all been wondering about doing this myself on my own p6 but some people online said it could break the bikes controller and since you did do this what was the new top speed?
Does it work for the varun ebike
750w 48v?
They gave me a 2017 Riese and Muller Charger 4 GT touring HS with dual bosch batteries for 100 mile range. On the screen it has a top recorded speed of 55 MPH but the most I get in Turbo mode is 20 MPH, maybe 22 if I pedal hard
This has no throttle
Can this also be unlocked to go faster?
Hi Bro ,your ebike is the mid motor styles ,this way cant work on your ebike with Bosch system,sorry
mine doesnt have a throttle, how can i do this
Anything for the Eleglide T1 Step-Thru?
Can someone tell me how you do it on a heybike race max?
does this method work for the aipas a2 elite?
Any idea how to do this on RAWBIKE u2? It's got the Dapu M155 engine if that helps.
There's an option in the service menu but I can't select it so it seems to be software locked. the bike is made to go atleast 32km/h on throttle alone.
Hey Bro ,yes ,i noted this and your ebike is 36V 14AH 500W ,actually the real motor of your ebike should be 350W(fake 500W printed) ,so 32km/h is the max speed on this SPEC ,we have to consider the battery and motor with 48V at least ,
What's up with the funeral music?
How do I unlock this on Jasion Eb7 fat tire bike same as video?
Hi Bro,your ebike has a powerful motor and battery,so you can unlock your speed to 28MPH at least,But cause of your battery limited ,the range of your ebike will be shorter if you release your speed to a higher .
you can try this way first(If it doesn't work, it won't affect any of your existing systems) .If this way cant work on your ebike ,pls try to unlock you speed with below way : see below way:
1.Pree M to power on the lcd display
2.Press and hold [+] & [-] for 2 seconds to enter the setup interface. (If any pass code required(pass word "6666") ,Press + to change the 0 to 6 and Press M to switch to anothe 0.Press M to enter the setup interface)
3.Single press [M] to cycle through the following modes
4.Press M to switch the option to P08 .
5.Setting the speed to 100 to unlock the max speed 6.Long press M to power off ,and workable after power on again.
Will it help to do it to a Jason e bike?
Bro I’m looking for the same thing😂got a eb5
Hi ,shoule be workable ,pls try it ,if not ,you can adjust it on the LCD Display
Yo that’s what I’m looking for😂
Does it work on a hey bike race max
Can I do this with a vivi electric bike
That’s what I want to know
Those have a different combination
Turn it on
Max PAS
Hold the - & + for about 5 seconds and that should do the trick
What about AovoPro eb60p??
Hi Brandon ,Sorry ,does not work on your lcd display ,
You know how to do ANCHEER with the G51-LCD? When I hit + & - and go into the settings there is only like two parameter options..
Long press "+" and "-"to start setting parameters, such as wheel size(inch), background luminance… (Refer toP00-P19)On the setting interface, shortly + or - press , or to plus/minus value. Parameters would be shining aftermodifying, choose the ones you prefer,a. Long press"M" to save the value, the shining would stop.b. Shortly press "M"to shift to the next parameter, and to save current values at the same time.c. Press "+" and "--" to exit setting parameters and to save values. If not press these buttons, it would exit andsave parameters modified automatically 10s later.
P00: Restore Factory Settings Set this value to 10 and switch to next setting,the display items will show all contents and restoreoriginal factory settings.P01 Background luminance. 1 is the darkest, 3 is the brightestP02 Unit of the mileage. 0 is KM, 1 is MILEP03 Voltage grades. 24V, 36V, 48V. The original voltage is 36V.P04 Sleep time. 0 never sleep, other numbers stand for the sleep time (1-60 min).P05 PAS grades. 0, 3 grades mode: 1 grade 2V, 2 grade 3V, 3 grade 4V 1, 5 grades mode: 1 grade 2V, 2 grade 2.5V, 3 grade 3V, 4 grade 3.5V, 5 grade 4VP06 Wheel size. Unit: inch. Precision: 0.1P07 Speed measuring magnet. Range: 1-100P08 Speed limit. Range: 0-50km/h, 50 means without limit No-Communication Status (controlled by the meter): when the real speed is over the ones we set, the meter would shut offPWM output; when less than the speed we set, the meter would turn on PWM output automatically, the driving speed would be±1km/h; (Speed limit is for PAS, not for Throttle) Communication Status (controlled by the controller): The driving speed keeps same with the ones we set. Random error:±1km/h. (Speed limit is for both PAS and Throttle)Notes: These data are based on KM. When changing KM to Mile, the speed value on the screen would convert to correct Milesautomatically, but if you do not change the setting of speed limit from KM to Mile, it would be different from the real speed limit inMile
G51 LCD ,see below:
Long press "+" and "-"to start setting parameters, such as wheel size(inch), background luminance… (Refer toP00-P19)On the setting interface, shortly + or - press , or to plus/minus value. Parameters would be shining aftermodifying, choose the ones you prefer,a. Long press"M" to save the value, the shining would stop.b. Shortly press "M"to shift to the next parameter, and to save current values at the same time.c. Press "+" and "--" to exit setting parameters and to save values. If not press these buttons, it would exit andsave parameters modified automatically 10s later.
P00: Restore Factory Settings Set this value to 10 and switch to next setting,the display items will show all contents and restoreoriginal factory settings.P01 Background luminance. 1 is the darkest, 3 is the brightestP02 Unit of the mileage. 0 is KM, 1 is MILEP03 Voltage grades. 24V, 36V, 48V. The original voltage is 36V.P04 Sleep time. 0 never sleep, other numbers stand for the sleep time (1-60 min).P05 PAS grades. 0, 3 grades mode: 1 grade 2V, 2 grade 3V, 3 grade 4V 1, 5 grades mode: 1 grade 2V, 2 grade 2.5V, 3 grade 3V, 4 grade 3.5V, 5 grade 4VP06 Wheel size. Unit: inch. Precision: 0.1P07 Speed measuring magnet. Range: 1-100P08 Speed limit. Range: 0-50km/h, 50 means without limit No-Communication Status (controlled by the meter): when the real speed is over the ones we set, the meter would shut offPWM output; when less than the speed we set, the meter would turn on PWM output automatically, the driving speed would be±1km/h; (Speed limit is for PAS, not for Throttle) Communication Status (controlled by the controller): The driving speed keeps same with the ones we set. Random error:±1km/h. (Speed limit is for both PAS and Throttle)Notes: These data are based on KM. When changing KM to Mile, the speed value on the screen would convert to correct Milesautomatically, but if you do not change the setting of speed limit from KM to Mile, it would be different from the real speed limit inMile
Will this work on a hiboy p6?
how can i unlock my limiter on an Eunorau UHVO?
Hi Bro ,do you know the motor of your ebike ? i only found the 350W Eunoray UHVO mountain ebike ,if that ,this ebike cant be higher speed ,you have to buy one higher motor with 500W at least ,you can contact us if you are interested in this higher power ebike in USA warehouse ,we have the 750W and 1500W ebikes in USA warehouse,email:info@i-fen.com ,whatsapp:+86 13480420332
@@I-FENEbike i found it maybe about 4 days ago. But thank you for trying!
@@pawkpot2329 ok,you can try one powerful Ebike if you are requiring a higher speed next time .
Hey bro i have colorway bk29 but i took off the throttle , csn i do this method without the throttle does it work , what can i do to make it faster , appriciate u
Yes ,pls unlock your speed on the lcd display:
1.Pree M(Power) to power on the lcd display 2.Press and hold [+] & [-] for 2 seconds to enter the setup interface.
3.Single press [M]/"Power" to cycle through the following modes
4.Press "M"/"POWER" to switch the option to P08 . 5.Pree +/- to Set the speed to 100 to unlock the max speed
6.Long press "M"/"POWER" to power off ,and workable after power on again.
P08: Speed limit: range 0-100km / H, 100 means no speed limit, The input data here represents the maximum operating speed of the vehicle: for example, input 25, indicating that the maximum operating speed of the vehicle will not exceed 25km/h; Drive speed maintained at set value,
@@I-FENEbike my speed limit is in setup number 3 , and it cant go more than 45kmh in the screen ,but when i drive it goes just 25kmh , how to make in my screen the speed limit till 100kmh ?
how bout an Gotrax Nephele 16 but with no display. 15.5 is my max too slow for travels to and from work.
This ebike has only 350W motor with 30N Torque ,it cant be faster any more,Bro you have to try one 500W motor at least ,we have some off road ebike in warehouse
Is there any way to boost the speed on a G-Tech Sport ?
Do you know the ebike model name ? i cant find this ebike on website
The top speed on my 500c display is 99 mph but I'll try it anyway.
Will this work with the basic display
do you have the ebike model name or the lcd display name or model ? will find out one way for you
@@I-FENEbike swagtron eb6 i don't have the lcd display i have the 2017 (I think model) with the display that only shows your battery bars
@@crippledmonkey7218 Yes, i noted ,this style have to be adjusted on the controller by the supplier ,buyer cant change this
What if you don’t have a display… I’ve got an IWEECH I’d like to unlock…
Hi Bro ,your ebike is the city ebike with only single speed and no throttle ,so no ways to unlock the speed ,you can try some throttle version ebikes with higher powerful motor ,
How to unlock on the Haoqi Rhino ebike?
Hi Bro ,did you try this way on your ebike ?
You can see below the changing way on your lcd display:
See below to unlock your max speed:
1.Long Press M to turn on the lcd display ,
2.Press and hold [+] & [-] for 2 seconds to enter the setup interface
3.If your ebike required the Enter passwork ,Enter the Password Code:"6666" (Our ebike),Press "+" or "-" to change the "0000" to "6666",Each "6" press M to move to next .
4.Single press [M] to cycle through the modes
5.Press M to set the menu to P08
6.P08-Set to 50-100 to unlock the max speed
7.Press and hold [+] & [-] for 2 seconds to exit the setup interface To Turn lights on/off:
@@I-FENEbike What do you mean by M? The power on button?
@@vylixus Yes ,"M" is the power on/off button
@@I-FENEbike Didnt work
Anything for Retrospec Jax Rev bike with KD58C controller?
Hi Bro,This controller has a same way to reset ,
see below way:
you can unlock the max speed on the Display ,see below the cooperation:
1.Press M to power On ,
2.Press and hold [+] & [-] for 2 seconds to enter the setup interface.
3.Press + to choose the option to 4 Set LS
4.Single press [M] to Enter or confirm the Option 4 ,and setting the speed to max you required.
5.Press M to confirm ths current speed .
Any idea for onesport ot16-2
Will This Work On METAKOO Cybertrack 100 26" Electric Mountain Bike
Does this Increase the speed which is capped at 20MPH because of the regulator. What does you mean by unlock speed
Hello ,for example ,some ebikes have the Speed limited with 32km/H ,and it can be to higher to 40KM/H or 45KM/H when you unlock this ,
Hey bro, will this work on Isinwheel U5 electric bike??
Hey Bro ,your ebike has a powerful motor with 500W ,but your battery is too small(7.8AH) to support a higher speed ,it will be very short range when you set it to a higher speed .
Will this work on a Bintelli Fusion? Thanks
Hi Bro,your ebike has a powerful motor and battery,so you can unlock your speed to 28MPH at least ,you can try this way first(If it doesn't work, it won't affect any of your existing systems) .If this way cant work on your ebike ,pls try to unlock you speed with below way :
see below way:
1.Pree M to power on the lcd display
2.Press and hold [+] & [-] for 2 seconds to enter the setup interface. (If any pass code required(pass word "6666") ,Press + to change the 0 to 6 and Press M to switch to anothe 0.Press M to enter the setup interface)
3.Single press [M] to cycle through the following modes
4.Press M to switch the option to P08 .
5.Setting the speed to 100 to unlock the max speed 6.Long press M to power off ,and workable after power on again.
Is there a method for an Eahora Juliet?
Hi Bro,you can try this way to release first ,if cant work,see below another way:
you can unlock the max speed on the Display ,see below the cooperation:
Press and hold [+] & [-] for 2 seconds to enter the setup interface.
Single press [M] to cycle through the following modes
Press and hold [+] & [-] for 2 seconds to exit the setup interface
To Turn lights on/off:
Turn on the LCD and hold the plus (+) button
Different set menu options:
P08-Set to 100 to unlock the max speed
Hello and thank you for this video. I wanted to know will this work for the Vivi Fat tire 750W Ebike?
Hi Bro,you can try this way to unlock your speed first ,if cant work,
see below another way:
you can unlock the max speed on the Display ,see below the cooperation:
Press and hold [+] & [-] for 2 seconds to enter the setup interface.
Single press [M] to cycle through the following modes
Press and hold [+] & [-] for 2 seconds to exit the setup interface To Turn lights on/off:
Turn on the LCD and hold the plus (+) button Different set menu options:
P08-Set to 100 to unlock the max speed
Does the Freesky Alaska Range have the option to remove the limiter?
@@JShawnPaul Hi Bro,yes ,your ebike has a powerful motor and battery,so you can unlock your speed to 28MPH at least ,you can try this way first(If it doesn't work, it won't affect any of your existing systems) .If this way cant work on your ebike ,pls try to unlock you speed with below way : see below way:
1.Pree M to power on the lcd display
2.Press and hold [+] & [-] for 2 seconds to enter the setup interface. (If any pass code required(pass word "6666") ,Press + to change the 0 to 6 and Press M to switch to anothe 0.Press M to enter the setup interface)
3.Single press [M] to cycle through the following modes
4.Press M to switch the option to P08 .
5.Setting the speed to 100 to unlock the max speed 6.Long press M to power off ,and workable after power on again.
@@I-FENEbike I don’t have an M button. Plus how exactly do I work my cruse control?
Will this work for a daylyride ebike? @@I-FENEbike
I have the GO TRAX Emerge electric bike, how do I unlock this one?
I realize now that there are a few of them it’s the 350 Watt 26 inch
@@MalachiReynalds 350W Motor ,the motor power limited the speed to max 32KM/H ,so the max speed cant be high ,you can try some of our ebiks with 750W or 1500W motor ,we have warehouse in USA and also in China factory ,you can contact us via info@i-fen.com
@@I-FENEbike I figured it out after a few hours in the garage, the motor controller limits my 36 volt battery at 29 volts so I’m probably just gonna take the motor controller to like a U break I fix and see if they can take it off
How to do it on totguard 27" e bikes
Hi Bro,Sorry for our delay to reply
pls try this way to unlock your speed :
1.Pree M to power on the lcd display
2.Press and hold [+] & [-] for 2 seconds to enter the setup interface. (If any pass code required(pass word "6666") ,Press + to change the 0 to 6 and Press M to switch to anothe 0.Press M to enter the setup interface)
3.Press M to switch the option to P08 .
4.Press +/- to Set the speed to 100 to unlock the max speed
5.Long presshold [+] & [-] for 2 seconds to exit and save the speed
@@I-FENEbike it only gives me P0¹, PO² and P1⁶ options in modes.
@@mosiurfahad9105 Hi Bro,your LCD Display was locked by the seller ,cant be reset by yourself
Can you tell me how to do it on my Meraki S7
Hello Bro ,I just noted this ebike has only 250W(real 350W motor) power motor ,so the max speed cant be more than 32km/h ,Any higher speed ebike have to be higher motor with 500W at least ,it has a higher torque and battery .so you can try some bigger powerful ebikes .We have some stocks in USA warehouse and our China warehouse if you have a plan to change your ebike .contact us now via info@i-fen.com or whatsapp +86 134 8042 0332
How to do this with ancheer electric bike?
G51 LCD:
Long press "+" and "-"to start setting parameters, such as wheel size(inch), background luminance… (Refer toP00-P19)On the setting interface, shortly + or - press , or to plus/minus value. Parameters would be shining aftermodifying, choose the ones you prefer,a. Long press"M" to save the value, the shining would stop.b. Shortly press "M"to shift to the next parameter, and to save current values at the same time.c. Press "+" and "--" to exit setting parameters and to save values. If not press these buttons, it would exit andsave parameters modified automatically 10s later.
P00: Restore Factory Settings Set this value to 10 and switch to next setting,the display items will show all contents and restoreoriginal factory settings.P01 Background luminance. 1 is the darkest, 3 is the brightestP02 Unit of the mileage. 0 is KM, 1 is MILEP03 Voltage grades. 24V, 36V, 48V. The original voltage is 36V.P04 Sleep time. 0 never sleep, other numbers stand for the sleep time (1-60 min).P05 PAS grades. 0, 3 grades mode: 1 grade 2V, 2 grade 3V, 3 grade 4V 1, 5 grades mode: 1 grade 2V, 2 grade 2.5V, 3 grade 3V, 4 grade 3.5V, 5 grade 4VP06 Wheel size. Unit: inch. Precision: 0.1P07 Speed measuring magnet. Range: 1-100P08 Speed limit. Range: 0-50km/h, 50 means without limit No-Communication Status (controlled by the meter): when the real speed is over the ones we set, the meter would shut offPWM output; when less than the speed we set, the meter would turn on PWM output automatically, the driving speed would be±1km/h; (Speed limit is for PAS, not for Throttle) Communication Status (controlled by the controller): The driving speed keeps same with the ones we set. Random error:±1km/h. (Speed limit is for both PAS and Throttle)Notes: These data are based on KM. When changing KM to Mile, the speed value on the screen would convert to correct Milesautomatically, but if you do not change the setting of speed limit from KM to Mile, it would be different from the real speed limit inMile
Does this work with SpeedRid 26" E-Bike?
Hi Bro,you can try this way to release first ,
if cant work,you can unlock the max speed on the Display ,
see below the cooperation:
1.Pree M to power on the lcd display
2.Press and hold [+] & [-] for 2 seconds to enter the setup interface.
(If any pass code required(pass word "6666") ,Press + to change the 0 to 6 and Press M to switch to anothe 0.Press M to enter the setup interface)
3.Single press [M] to cycle through the following modes
4.Press M to switch the option to P08
5.Setting the speed to 100 to unlock the max speed
6.Long press M to power off ,and workable after power on again.
i tried this on my hiboy p6 and it looked like some setting changed but the motor still locks out at 28 any help or advice?
Hi Bro ,i noted this ebike have set to 45KM/H ,this is a high speed now ,so if you requiring a highest speed ,pls try below the way :
LCD Display cooperation:
Press and hold [+] & [-] for 2 seconds to enter the setup interface.
Single press [M] to cycle through the following modes
Press and hold [+] & [-] for 2 seconds to exit the setup interface To Turn lights on/off:
Turn on the LCD and Press the M to set to the P08
P08-Set to 100 to unlock the max speed
@@I-FENEbike i tried this but i only have settings up to p04 and the rest are locked
@@timothyfox2783 Hi Bro,your lcd display is the EN06 ,as normally ,this is can be reset to P08 .
is this possible on a Schwin Coston CE?
Hello Bro ,i just checked your ebike ,it seems that your ebike is the 36V 8AH 250W ,this is a basic ebike with low speed version ,so you cant set this ebike to a higher speed ,next time you can buy one a higher powerful moto with 48V 500W 13AH at least ,then you can have a higher speed to 28MPH at least ,we have stocks in USA warehouse ,EU warehouse and Chian Warehouse ,welcome your inquiry.
Do you know how to unlock the speed with nakto folding ox
Hi Bro ,i noted the max speed of this ebike was set to 28MPH ,and your ebike is 48V 500W motor ,so this speed is enough based on this SPEC ,dont advise to set higher
@@I-FENEbike thank you!
Zeegr 48v think it would work?
Hi Omar ,should work ,pls try it with this way or below the cooperation:
Press and hold [+] & [-] for 2 seconds to enter the setup interface.
Single press [M] to cycle through the following modes
Press and hold [+] & [-] for 2 seconds to exit the setup interface To Turn lights on/off:
P08-Set to 100 to unlock the max speed
does this work for go power e bike gofalcon mine says it supposed to hit 32 but it only gets 18.9
Hi Bro,I checked your ebike ,it has a powerful motor with 750W ,so it is no problem to set it to a higher speed ,see below the way on your lcd display:(cause of the small battery 10.4AH ,the range of ebike will be shorter when you set to a higher speed ,next time you can buy one higher battery to 13-18AH)
you can unlock the max speed on the Display ,see below the cooperation:
1.Press M to power On ,
2.Press and hold [+] & [-] for 2 seconds to enter the setup interface.
3.Press + to choose the option to 4 Set LS
4.Single press [M] to Enter or confirm the Option 4 ,and setting the speed to max you required.
5.Press M to confirm ths current speed
@@I-FENEbike thank you so much now I reached its max thx so much
@@Corbieditz great ,and Please also pay close attention to cycling.enjoy your riding
Will this work on a Jason EB5 bike??
Hi ,you can try this way to release first ,if cant work,see below another way:
you can unlock the max speed on the Display ,see below the cooperation:
Press and hold [+] & [-] for 2 seconds to enter the setup interface.
Single press [M] to cycle through the following modes
Press and hold [+] & [-] for 2 seconds to exit the setup interface
To Turn lights on/off:
Turn on the LCD and hold the plus (+) button
Different set menu options:
P08-Set to 100 or 67 to unlock the max speed
32kph is still legal. I need 60kph at least!
Bro ,you need to buy one E-motorcycle ,which has the superpower motor and nice design
What about the ibafng
ibafng ? the ebike name ?
@@I-FENEbike gravity renegade
How about a BIRIA
Do you have the ebike model name ?will find out the way for you
Will this work for a daylyride ebike?
Hey Smith ,do you have the model name of this brand ebike ? i will check it out for you
@I-FENEbike I tried it!!!! It worked great, thank you so much
@@brennensmith813 thank you,and you can follow our channel we will release some new videos or stocks here
How can these tips apply to every single Ebike brand?
Almost controller system is similar same ,so you can change it with this way ,if not ,you have to set it on your LCD Display .
This shii don’t work
Hey man do you know if this works on a Dyu D3F ?
Hello bro ,sorry ,your ebike is too basic with only 250W or 350W motor(this torque can be only supported 30KM/H OR 25km/h),cant be higher speed ,if you are looking for a higher speed ebike ,we have some 750W-1500W ebike in stock in USA warehouse and our China warehouse ,you can try it .
mine took a screenshot
I have a Vivi Electric Bike 26 inch and it does not work
Do you know the LCD Display Model No. or can you tell us the ebike model No.?we can know the LCD and give you a fix way
Pls try this way on your lcd display :
1.Long Press M to turn on the lcd display ,
2.Press and hold [+] & [-] for 2 seconds to enter the setup interface
3.Enter the Password Code:"6666" (Our ebike),Press "+" or "-" to change the "0000" to "6666",Each "6" press M to move to next .
4.Single press [M] to cycle through the modes
5.Press M to set the menu to P08
6.P08-Set to 50-100 to unlock the max speed
7.Press and hold [+] & [-] for 2 seconds to exit the setup interface To Turn lights on/off:
Will this work on the dk200 E-Bike??
Hello bro ,you can try it with this way ,this Ebike has a big power and the real speed can be 45km/h at least.if this way is not working ,you can tell us
do you know how to on the hanevear
Hi Bro ,can you tell me the model of this Brand ,i will check it out and give you the suggestion
After I unlock it, can I put back the limit again? Or it will have to stay unlocked forever after that?
Yes,you can reset the max speed on the lcd display ,LCD Option P08 and enter the max speed to 25 or 32KM/h or the max speed you need
@@I-FENEbike After I did your trick, it doesnt matter what I put on option P08. Even if I have 25, it still goes up to 32. Very weird
@@KaftiBrizola P08: Speed limit: range 0-100km / H, 100 means no speed limit, The input data here represents the maximum operating speed of the vehicle: for example, input 25, indicating that the maximum operating speed of the vehicle will not exceed 25km/h; Drive speed maintained at set value, this is the system process
If cant work,do you think you can ask this from your seller ?
@@I-FENEbike Yeah this doesnt work. Whatever i put in P08 it still goes up to 32. I will ask the seller thanks
I think this made my bike stuck at 16 mph instead of going up seems like it locked into a slower mode for my bike ! Please help
Think is shortcut for the TIRE DIaMETER! The bike is traveling the same speed as always, but diameyer lowered makes the wheel rotation increase! Those of yaz with half a brain can understand what I'm saying! 😊
This is a nice point ,as the ebike ,the power or speed is based on the motor power/torque ,so the side of tires are not the mainly point to an e-bike/
Yeah that method doesn't work I used a speedometer and even though you tricked the lcd controller to go 24 mph I'm still going 19mph .
@@malikedmond8398 Hello Bro ,can you tell me your ebike brand name > will check and find out a way for you
@@I-FENEbike varun
Does this work on allegro ebike
Hi Bro,you can try this way to release first ,if cant work,see below another way:
you can unlock the max speed on the Display ,see below the cooperation:
Press and hold [+] & [-] for 2 seconds to enter the setup interface.
Single press [M] to cycle through the following modes
Press and hold [+] & [-] for 2 seconds to exit the setup interface
To Turn lights on/off:
Turn on the LCD and hold the plus (+) button
Different set menu options:
P08-Set to 100 to unlock the max speed
What type of bike is this?
48V 750W ,you can tell us if you have the plan to buy one powerful ebike ,we have warehouse in US and China ,max speed can be 45-50KM/H ,info@i-fen.com
Any idea how to do this on SMLRO e5?
Hi You can try this way first and see if your ebike can release the speed or not
Hey would this work with the varun 750w e-bike ?
Hi Bro,you can try this way to release first ,if cant work,see below another way:
you can unlock the max speed on the Display ,see below the cooperation:
Press and hold [+] & [-] for 2 seconds to enter the setup interface.
Single press [M] to cycle through the following modes
Press and hold [+] & [-] for 2 seconds to exit the setup interface
To Turn lights on/off:
Turn on the LCD and hold the plus (+) button
Different set menu options:
P08-Set to 100 to unlock the max speed
Did this work for you? I have the same bike these Chinese really capped our bikes hard-core
Will this work for vivi mt20 it has a 500 watts and 20mph
500 watt isn’t capable of going more than 25
@@tfromtheo8697 As our suggestion ,500W motor can be max speed to 45KM/H(28MPH) ,The torque is no problem
Hi Bro ,yes ,you can try to unlock the speed with this way ,but some suppliers will change the system ,so you can do below way if this video is not working :
see below the cooperation:
Press and hold [+] & [-] for 2 seconds to enter the setup interface.
Single press [M] to cycle through the following modes
Press and hold [+] & [-] for 2 seconds to exit the setup interface
To Turn lights on/off:
Turn on the LCD and hold the plus (+) button
Different set menu options:
P08-Set to 100 to unlock the max speed
How can I unlimited speed of a ancheer bike 2022 model one?
Hi ,Did you try to unlock it with this way ? you can try it first
@@I-FENEbikeI did, but my display error when I did this way. So do you have a new way?
@@kid-creatordo you know the model No. of your lcd display ? i can find a way for you
@@I-FENEbike I don’t know the model of display but I can send you the picture! m.ks.hc-cdn.com/site-ancheer/2023/09/a0d4756f-16ff-47f5-af2c-df4b07b7a415.jpg
Does anyone know id this worked for them
Not all ,you can tell us your ebike name ,we will give you another way based on your ebike
Didnt work on my rambler 20
Yes,it seems the lcd display is too basic
DID NOT WORK WITH MY RIDSTAR AND AKEZ EBIKES
Hi Bro,you can try this way to release first ,if cant work,see below another way:
you can unlock the max speed on the Display ,see below the cooperation:
Press and hold [+] & [-] for 2 seconds to enter the setup interface.
Single press [M] to cycle through the following modes
Press and hold [+] & [-] for 2 seconds to exit the setup interface
To Turn lights on/off:
Turn on the LCD and hold the plus (+) button
Different set menu options:
P08-Set to 100 to unlock the max speed
does this work on a gotrax f1 ebike?
Hi Bro,i checked this ebike ,this lcd display should be worked ,you can try this way to release first ,if cant work,see below another way:
you can unlock the max speed on the Display ,see below the cooperation:
Press and hold [+] & [-] for 2 seconds to enter the setup interface.
Single press [M] to cycle through the following modes
Press and hold [+] & [-] for 2 seconds to exit the setup interface
To Turn lights on/off:
Turn on the LCD and hold the plus (+) button
Different set menu options:
P08-Set to 100 to unlock the max speed
@@I-FENEbike it only maxes to po-4
@@weilinwilliamluo Hi Bro ,i just double cheked this ebike and noted the motor power is only 350W ,so the max speed cant be higher than 20mph ,we have to buy one ebike with motor 500W at least ,if you have the plan to try some bigger power ebike ,you can contact us via info@i-fen.com ,we have ebikes in USA warehouse with 750W to 1500W power and max speed can be 45-50KM/H
Max speed is already set to 19-20 mph, so what exactly are you trying to show us??😡
He’s trying to show you how you can set it higher. Mine is set at 25km and, I’d like it to go up to 32km. But, it’s factory set for 25 and it’s apparently password protected.
@@cuernavacadave I feel your pain. Mine is set to 25mph, and at full throttle the limiter kicks on and off to keep it from reaching higher mph. Mine might be password protected, or just set in the firmware to restrict itself or both. I plan on figuring out how to do it. If i do i'll get back to you and maybe my method will help you.
@@willdorten6867 , thank you, that would be awesome.
Right, talk about a waste of my time this video!!!
@@cuernavacadave Hi Bro, you can try to enter into your lcd display ,for example ,the lcd display password code of our ebiks are "6666" :
See below the user guider:
1.Long Press M to turn on the lcd display ,
2.Press and hold [+] & [-] for 2 seconds to enter the setup interface
3.Enter the Password Code:"6666" (Our ebike),Press "+" or "-" to change the "0000" to "6666",Each "6" press M to move to next .
4.Single press [M] to cycle through the modes
5.Press M to set the menu to P08
6.P08-Set to 50-100 to unlock the max speed
7.Press and hold [+] & [-] for 2 seconds to exit the setup interface To Turn lights on/off:
HOVSCO A5
Hi Bro ,i checked the spec of your ebike,it seems that it is only 250W/350W of ebike ,this motor is not powerful ,cant be higher speed ,you can tell us if you have any plan to buy one higher powerful ebike with 500W-1000W ,
Anyone have a Heybike mars that it work for
Hi Bro,you can try this way to release first ,if cant work,see below another way:
you can unlock the max speed on the Display ,see below the cooperation:
Press and hold [+] & [-] for 2 seconds to enter the setup interface.
Single press [M] to cycle through the following modes
Press and hold [+] & [-] for 2 seconds to exit the setup interface
To Turn lights on/off:
Turn on the LCD and hold the plus (+) button
Different set menu options:
P08-Set to 100 to unlock the max speed
All the comments are smooth brainers. Figure it out yourself
Funny video
For my hitway ebike not working
Hello ,can you tell me the Ebike mode No. BK ?? I will ask our engineer to make a video for you
Hitway Bk11m
@@philcangametourtv Hi Bro ,this one cant be higher speed ,cause it is only 250W/350W motor .you have to buy one 500W motor and torque can be stronger to 45KM/H-50KM/H
@@I-FENEbike 750w 48v 15ah my hitway
@@I-FENEbike only 32km per hour limit in canada..
Still don’t know the mph.. so fail 👎. This is America buddy.
Hi Bro,you can Watch our another video"how to change the KM to MPH" ,
you can change all via your LCD display ,see below:
Different set menu options:
“SET 1” - Press [-] and the Trip will reset to 0.
“SET 2” - Set the max speed.
“SET 3” - Set the wheel size.
“SET 4” - Set the bike in either MPH or KPH
“SET 5” - Pedal Assist Limiter - on/off
“SET 6” - Throttle Limiter - on/off
See below to unlock your max speed:
1.Long Press M to turn on the lcd display ,
2.Press and hold [+] & [-] for 2 seconds to enter the setup interface
3.Enter the Password Code:"6666" (Our ebike),Press "+" or "-" to change the "0000" to "6666",Each "6" press M to move to next .
4.Single press [M] to cycle through the modes
5.Press M to set the menu to P08
6.P08-Set to 50-100 to unlock the max speed
7.Press and hold [+] & [-] for 2 seconds to exit the setup interface To Turn lights on/off:
this doesnt work
Hi Bro,pls try this way on your lcd display:
1.Long Press M to turn on the lcd display ,
2.Press and hold [+] & [-] for 2 seconds to enter the setup interface
3.Enter the Password Code:"6666" (Our ebike),Press "+" or "-" to change the "0000" to "6666",Each "6" press M to move to next .
4.Single press [M] to cycle through the modes
5.Press M to set the menu to P08
6.P08-Set to 50-100 to unlock the max speed
7.Press and hold [+] & [-] for 2 seconds to exit the setup interface To Turn lights on/off:
didnot work on my ebike 'yc-um-01' 250w motor current top speed 25km/h
Hi Bro ,your ebike is similar like our off-road fat tire ebike EMSx Series,this style can be 45KM/H(250W marked on motor ,the real torque should be 55Nm=500W motor) ,But cause of the EU standard ,the max speed was set to 25km/h ,you can reset it on your LCD if you prefer a higher speed (it .is better to follow local rules and keep this speed).below is our setting way on the speed on our ebikes.
Find P08 codec :
Speed limit: range 0-100km / H, 100 means no speed limit,
The input data here represents the maximum operating speed of the vehicle: for example, input 25, indicating that the maximum operating speed of the vehicle will
,there will be a setting code on the display and can release the limited speed.
Promo*SM ✋
and you are putting people in danger by giving this information out you are irresponsible
F EM!!
no one cares
inject some testosterone
let us die please
"Promosm"