ฝัง
- เผยแพร่เมื่อ 2 ต.ค. 2024
- Like the channel? Help support it here- paypal.me/rack... A full Racknload review of the awesome Colt SAA Peacemaker from Umarex.
Magazine Capacity: 6 shots
Velocity: 394 fps
Overall Length: 275 mm
Weight: 867 g
Available here-
www.livens.co.u... DISCLAIMER - Our videos are strictly for documentary, educational and entertainment purposes. Imitation or the use of any acts depicted in these videos is entirely at YOUR OWN RISK. We (RACKNLOAD) and TH-cam will not be held liable for any injury or damage or violation of the law. We do not sell or deal in firearms or any other shooting products. Such practice is heavily regulated and subject to applicable laws. We DO NOT sell Firearms, shotguns or airguns nor do we sell parts, magazines or ammunition. PLEASE BE SAFE AND RESPONSIBLE.
© RACKNLOAD 2018.
As soon as I saw the opening still of this upload I was smiling, Straight back to my childhood ! The vid did not disappoint me (very well done by the way) as these babies looked like the real thing, like the blue one for me as I think that was the one mostly used in the films and stuck in my mind. They are not cheap but for something that looked that good they would not be. never owned a bb gun before, but will make an exception for this beauty ! thanks for the upload Rack !
atb phil
Cracking review
Man them 45s are beautiful
Definitely gonna get one
each co2 cartridge should be lubed with a single drop of Pellgun oil at the tip where the co2 cartridge fits against the gasket. other oils are not suitable. this keeps the gasket ALIVE. this is in the instructions that us 'Girly-guys' will read. (smile pardner)
excellent camera work !
Late reply l know BUT DO NOT PUT PELGUN OIL ON THE CO2 BULB NIPPLE IT CONTAINS PETROL WHICH DRIES OUT THE SEAL IN DOUBLE QUICK TIME.
Instead use silicone oil or wax, PELGUN oil should NEVER HAVE BEEN RECCOMENDED.
I watched probably hundred of reviews for peacemaker but your sounds most sincere and from the heart, it's just what I needed cause im planning on getting finally my first airsoft gun (I'm new to all this, it's sad to know that I have more experience with real deal than expensive toys) so as a newbie my question would be will this gun fill my expectations ? I'm a sucker for westerns of course but I need proper shooter with looks :)
Very nice review! I like the way you hold the guns. Gently and carefully.
I've ordered one ivory (it's 4 years later now though) and I'm looking forward it.
Awesome!! Review RACNLOAD I happen to own the exact same BB Pistol only in blued version. Although we have different laws and customs with guns here in the U.S. we both do agree on how this Colt single action Army BB gun is really cool and so great in feel and history in the hand. I am now a new subscriber thanks for the great review and video.
+Chris Pasion Cheers buddy! Atb, Rack
Was about to buy one of these but had to check TH-cam first to if they are any good, and now I'm ordering two after seeing your Vid lol cheers :)
+John Barrett Haha, don't blame me lol! Enjoy! ATB, Rack
very detailed and helpful review, i’m gonna pick one of these up i’m thinking the nickel BB version with the imitation ivory handle, have you had any problems with its performance so far? i’ve heard tell that these have a issue with the barrel or something like that. thank you again and very nice review you’ve earned yourself a like and a sub
Cheers buddy, it was a loaner so no long tern data unfortunately...
@@racknload ah well i appreciate you still reaching out and responding! and still a very nice review fella ya sold me on it i think i’m gonna get it and just see how it goes
Theyre brass coated steel . My pal wire wools the brass off the front to make the cartridges look like they have bullet heads on the cartridges
The nickel would look better with the walnut look grips if you swapped them.
The added bonus being the blued peacemaker would then have ivory look grips - just like the Duke's six gun. Check out John Wayne movies Rio Bravo, Eldorado & Rio Lobo :) :) :)
I have the silver one .....damn what a piece!!! I just love it!!!
Instructions?? What do we need those for? lol we're men aren't we? 😂 You make me smile Neil, you really do! My favourite is the blued steel version by the way! 😁
I just ordered a blued 4,5mm pellet version. Coming in few days.
The grip is what I love on the real guns. These Umarex guns have an awful grip shape that spoils their looks and feel in the hand. Wish they could have designed it better. I know it was done that way because of the large CO2 container in the grip.
Yep the grips are more in the style of the old black powder cap n ball Colts but like you say they were made this way to house the co2 bulb, and yes the much smller handle on the real. Pecemaker gave it a better look and the feel certainly different, but for me the grips are too small they must have haad tiny hands in those days.
I have XLarge hands so the bigger grips are better for me, but again the aesthetics of the real guns are more pleasing
I just got the blued version, and it's the bees knees!
Well, I'm out 200 pounds cos of your enthusiastic explanation of these guns!! I've got mine (blued version) today, and i LOVE it!! It looks even better in person!!! I have a real revolver, S&W Chiefs special, but this Colt is cool, cos i can shoot it in my basement! Of course there is no recoil like with my S&W, but i don't have to drive to the range whenever i want to blaze away! lol!!! Umarex should pay you ratios for each gun they sell!!!!! looking forward for your next rewiew! ;-)
It’s the grip not handle. Lovely guns but somewhat ruined by ugly white trade marks re bounding hammer design and safety catch. Fanning the hammer will wear the cheep internals out in no time.
The question i am confronted with is should i get the SAA version or the Western Legends version. The SAA has the colt logo and uses metal BB's vs the other one that uses plastic BB's but is almost half the price.
I have the antique version inside my display cabinet its definitely the best purchase i have ever made so far looks absolutely stunning at night with the lamp on inside my display cabinet. I'm picking up another one on tuesday the limited edition version numbered 1-500 cant wait.
12:09 aged? we call it used half price xD
Only three clicks when you pull the hammer? There's supposed to be four for c o l t... other than that it's a pretty cool toy.
It’s 4 the first it’s when it “rests” but you have to do forward the hammer and after you hammer it
It's called the GATE, not a door... ;-)
I got one. The pellet version. Looks great. The grips could have looked like the original colt' s black plastic grips instead of trying to imitate wood.... What is your opinion about its accuracy? For I am not an obsessive airgunner, just bought it out of my love for colts and westerns... Why do you think the frame is supported by some small screws instead of the big ones that hold the original? Think that has to do with better sealing for the airgun.....
It’s a great all around pistol th-cam.com/users/postUgkxnX9wE_Q8zvF75Y5iWzTU3Q4FlrtyGApQ , doesn’t fit in plastic glock 19 holsters but will fit in some non plastic ones. The location of the safety isn’t very good because your finger will accidentally activate it but it can easily be removed by pulling on both sides at once. Don’t lose the red o-rings while doing that.
10:05 loading gate(jeez)
I wish they were made like the Remington 1875 by crosman where you can actually pull the pin out and remove the cylinder like a real firearm
Thank you for pointing out that fanning is not good. Real Model 1873s and clones are not as stout as one would think and fanning is rough on them.Great vid. I just picked one up to plink with.
Cool gun, grips are not so cool, mabe some aftermarket?
If you not supposed to fan it then what's the point? That's akin to telling someone not to spin it on their finger.
Can you use pellets instead of bbs. I saw some aftermarket shells that said that you could use pellets.
love the close up camera work. have subscribed. brian d.
Just Got The Nickel one...and I can't Put it down!!!! -Great Video, Had to Like and Sub!!!! :)
Enjoy!
Anyone had any issue with their bb version of this colt SAA from Umarex? I just bought mine and I want to know if I will have any issue or any problem with the gun… I hope everything’s gonna be fine
HOLY SH** 170 pounds ? ( $ 240 ) their about $ 100.00 US dollars here in the US...
Always pull the Hammer all the Way back when on halfcock. Always!!
How would that be possible if it’s halfcock when you want to reload? And how would be all the way back if it’s halfcock dude what do you mean?😂
Am going to have to edit in some nice gun shot sounds when I make a video shooting these :-)
Yep lol!
Now that was some smooth unwinding
I wish they were made like the Remington 1875 by crosman where you can actually pull the pin out and remove the cylinder like a real firearm
Me gusta la plateada como puedo hacer para adquirir un pak completo soy de Spain Barcelona quisiera información precio si mandáis aquí todo para su compra y si es posible me encanta espero respuesta gracias
now do i get one of these or do i buy a .22 SAA replica for like 150.... I need a companion to my Henry Golden Boy.
Can you tell me the name of the black one? The page isn't available anymore.
Is it a must to insert the co2
Is it possible to fan-fire it?
Is the savety metal or plastic ? Anyway it doesn't look so good.
Sad that the cocking mechanism isn't against the gun when it's in rest position.
The allenscrew is to large couldn't they make it a little smaller.
and like you said in the review the handle grips how they are attached is scary.
where can i find more of these shells for less than $35?
.second410 fps not much power in them.i just got a sr 357 more power.450 per second.
In the 60s I had a ruger 22 LR pistol like this so when I saw this I had to have one mine is the nickel with pearl handle i only shoot pellets just seat the pellets in 1/8" from how you set the bbs shooting mine right now
Can I use a non steel bb on it?
Hello lad, just wondered ?? 2015, how are they doing, still working ok ?? I brought all three of them here in birmingham autumn 2020, LOVE EM TO BITS especialy the bluey, im 76 cant do much about getting old, but sod growing up. hope to hear back from you, Graham in birmingham,
Hello buddy, I had them on loan from a shop....
your very right about that bit of plastic on the removable Grip.... CHEAP...and prone to breakage without a doubt.
the antique looks nicest in my opinion
why else would a company go through such extreme lengths to make it as much of a replica as possible and then leaving it looking brand new when the production stopped years ago and the smooth bore bugs me when theres a model of this with a rifled barrel but there still a wonderful english version of a tribute to an awesome weapon there all real nice tbh
Here in Texas we use real colt 45s. They're a whole lot more fun.
More expensive too, to buy and ammo costs gave spiralled.
Nice cheap pellets or even cheaper BBs are fun to fire in their hundreds for the cost of 1 real shell.
you can get one everywhere in America. you're not special
thats in fecking texas, not everyone is that lucky dude !
Better buy them all :D
Minor on the well-worn version as you name it, is that some parts of the gun don't have the same finish on it like the other parts of the gun (so the barrel, cartridge gate and hammer will be more black in comparison to the frame, for example) .
This will result in different shades of black on the well-worn verion...
however you will get more worn effects on the gun if you are going to use it often.
I just wish you would stop doing these reviews, you have just cost me £103. I got the Nickel one, you were spot on, it takes me right back to when I played cowboys and Indians in the early fifties. Thank you, Thank you ATBM8
binness Haha! Sorry buddy! Money well spent though! Rack.
Why dont the hammer go fully closed ?
It would push the valve and leak the co2. That's how I empty the remaining co2 when I'm done shooting. Hold the trigger and push the hammer and all the air will release.
Good video.. I DON'T READ INSTRUCTIONS MY SELF. I JUST DIG IN.......lol
Mate, what you were refering to was the Antique version, and you should get one of them :D it adds so much more to it.
The nickel-version is absolutely the shining one :D And I love mine for that reason. But the Antique(worn) version is more realistic !
I haven't got the blued version. Do you ensure me to get my hands one one ?
Notesial Get one mate, they are both lovely looking!
Nice review!..........Those are great replica of the .45 Colt SAA. I just ordered a "Mauser M-712"
Does the colt connect with shell where the co2 gas goes in ? I wonder how the revolver seals the gas in the back..at entry point?
Picked up one of these last week Rack, absolutely fantastic, thanks mate,
another bang on review, will really have to buy you that pint...... Cheers Jack.
I would assume being a steel pellet they can't be used in actual airsoft game? just target shooting, cos i really want to get an airsoft version
+Zentasu There is an official Umarex 6mm version in Nickel only, IIRC, but a few retailers sell guns they advertise as "custom converted". This is possible - I've done it myself.
Be careful, though. Despite web site claims, NONE of the Umarex SAAs have any form of hop up, and I'm not sure the conversions do either.
Mine DOES have a fixed R-hop, but that's a lot more work to do than the simple barrel replacement I believe the retailer custom guns have.
For example, making the special forcing cone that holds the barrel upright, and machining the special inner barrel with hop window, then fitting the R-hop patch takes about 2-3 hours with my tools (lathe and mill required).
A simple barrel replacement and modifying the original forcing cone would take about half an hour at most, and can be done with just a lathe..
So...which finish is the best ? its too hard to decide !
I think the antique one is cool but im leaning more towards either the nickel or blued one...
+Keith Beckett I like the nickel myself!
Gee thanks....... You just made me go spend over a $100..... :D lol
Id like a brown non glossy handle with nickle finish.
does it use only bbs or can use pellets too? does it do big damage to targets?
Parmenion you can buy them in 4.5mm steel bb .177 pellet or 6mm airsoft bb
The 4.5mm steel bb version has a smooth bore barrel. You can Fire Both bb or pellet out of it useing the brass bb cartridges or buy the silver cartridges which sre the pellet cartridge. With bb you will avverage 393 feet per second with pellet 325 feet per second pellets slightly more accurate even eith dmooth bore barrel.
@@darylnahorny7929 so in my .45mm bb version which I bought today I can shoot pellets too?? I heard pellets are more safe than the BBs I’m not sure now and I don’t want to have any issue with my gun while shooting with BBs. But I want to know if I can use pellets too
The breech door is a loading gate...mate.
Recommended bb weight?
Quais as condições para compra de uma arma dessa?
Full review, NOT! He didn't shoot it!
He did, he also did the range time video, clue is in the title! 👍
The only thing I don’t like about this gun is that the hammer protruding and doesn’t seat at its place looks as if the gun is half cocked at all time.
Hi Rack, I agree its got to be the Nickel one........Merry Christmas.
Merry Christmas buddy!
Love the rifling showing at the end of the barrel
It's powerful enough to go almost right through a soup can close range of course
Doug Cataraha with 4.5 mm steel bb it sversges 393.166 feet per second and does go through soup cans 17 feet no problem. If you use pellets it will only dent the the doup can unless you use specificly designed pellets ment for penitration but those are expendive and not easily found excrpt at specialty shops or online
Is there one available that fires plastic bbs rather than steel?
You can fire plastic bbs out of all of them, if they can take a steel bb plastic is no bother at all.
Antique. Finish
Valores das armas, tem em cal 06 mm ??
Só laptops gringo boss
Do you need to buy the ammo separately?
Comes with the shells...
like it
can you use them for pest control
Not powerful enough plus illegal to do in the UK...
@@racknload ok then what is good for i mean is it good for plinking soda cans if yes then ill just use those to do that
Just gotta love the fact that they're pretty much left handers...
Hell, if money is no object... A pair of them, surely.
Could it be use in airsoft with plasic 4.5?
Short answer, no.
Thats all i needed
+KILLERINSIDE 117 If you have the tools and the expertise, you can convert it to fire 6mm airsoft BBs. I have done this.
You need to replace the inner barrel with a specially-machined piece of airsoft inner barrel. Then you need to either make a new forcing cone, or drill the original.
I made an entirely new barrel and forcing cone assembly and included a fixed R-hop. I get 40m+ dead straight firing 0.30g BBs with 0.20g equivalent muzzle velocity of 300 fps, using modified 6mm Dan Wesson powerdown shells.
The shell modification involved replacing the restrictor in the shell with one that has a slightly larger hole.
The gun will chamber and function with unmodified Dan Wesson shells.
Thanks man
Could you use this to take out squirrels
No.
I got this John Wayne gun and the Umarex Colt Single Action Army 45 .177 Pellet Nickel Air Pistol. They are the same gun just different logo on grip. But I don’t understand that one says it’s for shooting bbs and the other pellets. I shoot both on both guns and it works great. Put it in the shell and shoot. It’s all the same size. It’s for a .177. Correct?
The pellet version has a rifled barrel and the BB has smooth one.
@@rolandrimann8788 so in bb version I can’t use pellets right? It will damage the barrel or something? I just bought mine bb version and I hope I won’t get any issue with the gun. It’s so beautiful and realistic
@@jimmistziavaras2389 I think you will be okay using pellets in a rifled barrel but not bb's in a rifled barrel, so pellets or bb's in a smooth barrel.
@@rolandrimann8788 so Bb version I got it has a smooth barrel right? Everything’s gonna be fine right? I mean with BBs
@@jimmistziavaras2389 Yes that's right, you can use bb's or pellets in a smooth barrel.
i´ve got a few complaints first the shell should look more realistic with the projectile and the caliber 4,5 steel BB illegal here in Denmark sould be 6 MM ....other than that AWESOME i really wanted a Blued finish one
du kan godt få den i 6 mm. den kan bestilles på redwolf.
+C lynge Det er ikke helt den samme...heller ikke som jeg skriver vil havde den i Blued Finish
+pkj77 Rettelse redwolfairsoft.com
+C lynge rettelse du havde mig næsten også selve siden méen i kommentarne neden under står der at det er 4,5 mm ikke 6 mm versionen forkert info på siden www.redwolfairsoft.com/redwolf/airsoft/Gas_Blow_Back_Pistols_Umarex_Umarex_RWC_Custom_SAA_45Co2_Metal_Revolver_6mm_BB_Blue_Brown.htm
+pkj77 hmm jeg tvivler. jeg har købt fra denne side før,og stoler på deres info. men jeg skal gi besked når/hvis jeg modtager den 😀
the size of the cartridges is not .45 colt, but 38 special. so no gun is not 100% identity
It was made for a whole lot of cartridge caliber. 45, 38 special, 44 special, 357 magnum and more.
this revolver has the inscription on the barrel - .45 colt))) But the chambers in the cylinder are for caliber .38. Its about ident
@@AlohaOe1972 I don't think it's .38 like a bullet on purpose. It's just 10mm holes.
The barrel is smaller and slimmer than the real thing, the real things barrel ending looks enormous, whereas the umarex looks too narrow, but still beautiful.
Don't want to break your bubble but the cartridges do not last a long time ;).
They become damaged, like in scratched on, and will turn from that beautiful brass color(gold) to a black color...
+Notesial
I have not personally come across this. I have been firing my gun for a while now and i clean the cartridges after each use. The only way they would get black is if you fail to clean and polish the brass cartridges.
+Notesial Dan Wesson revolver shells fit and function too, though you get slightly lower muzzle velocity due to the BB being sited at the front of the shell.
WE GOT CLINT EASTWOOD UP IN HEREEE
He is the worst ever Clint eatwood fal over dead looking at his skills
Duuuudeeee! Shhh... It's an Airgun, relax😂
Bit of a hassle to reload, they should have made the shells gas powered, sure a bit more espensive but you know gas will be enough for as many cartridges you have.
why does everyone think you have to shoot fast, these guns at the time were the fastest around, nowadays its more of a gun you slow things down with