ฝัง
- เผยแพร่เมื่อ 14 ก.ค. 2015
- Like the channel? Help support it here- paypal.me/racknload?locale.x=... Just a pre-review video of the Colt Peacemaker SAA .45 BB version from Umarex. A gun that you will find hard to put down! Pure 'plinking' fun!
DISCLAIMER - Our videos are strictly for documentary, educational and entertainment purposes. Imitation or the use of any acts depicted in these videos is entirely at YOUR OWN RISK. We (RACKNLOAD) and TH-cam will not be held liable for any injury or damage or violation of the law. We do not sell or deal in firearms or any other shooting products. Such practice is heavily regulated and subject to applicable laws. We DO NOT sell Firearms, shotguns or airguns nor do we sell parts, magazines or ammunition. PLEASE BE SAFE AND RESPONSIBLE.
© RACKNLOAD 2018. - กีฬา
![[ไฮไลต์] "บิว" ภูริพล บุญสอน วิ่ง 100m ชาย รอบคัดเลือก | โอลิมปิก 2024](http://i.ytimg.com/vi/3kUSMfgtQ5s/mqdefault.jpg)
Anyone who's unsure, buy this. It's amazing. I'm a grown man and I'll admit I've been playing with this like a kid again. It brings out your inner cowboy. I dare you to try NOT spinning it around like a knock off Doc Holliday. My only suggestion would be to make sure you buy PLENTY of c02. I've been using like 3 cartridges a day since I got it.
PS if you're low on c02 or want to empty the cartridge, pull the trigger and push the hammer in. Hard if the c02 is still filled.
If you're looking around for a BB pistol I would recommend this one th-cam.com/users/postUgkxnX9wE_Q8zvF75Y5iWzTU3Q4FlrtyGApQ . I ordered two BB pistols from Dan Wesson and this one is so much nicer than the other one. It's a well built gun. Can't say that about the other one. I thought the Mag was pretty easy to load. I also just lock the spring back and fill up the hole with 16 BB's with no sweat. Easily remove the rear part of the handle from the bottom with the Mag removed to access the CO2 chamber. Sweet. Very nice painted sights on both ends. Doesn't have blowback but the gun is rated at 410 fps the blowback edition is 365 fps.Didn't really know much about BB guns before but now I see that Umarex makes some fine BB guns. You'd be hard pressed to find a nicer CO2 air pistol than this one I think. Just seems flawless. It even states on the packaging Glock perfection. I think my next Airgun may very well be an Umerex. Oh and if you really want a blowback (don't think amazon sells the Glock w/blowback) you might consider the Beretta APX by Umarex. But that gun is only rated at 310 fps. All things being equal, if it were me I'd buy the Glock again in a heartbeat :)
If i had both id be tempted to swap the grips over purely for contrast.
Si sui sottomarini il telefono non prende bene
@@marcorighini6201 wtf are you saying? The google translate made it sound a bit wierd 🤣
That's exactly what l did l have both colts one in silver and one in worn black, the faux ivory on the silver looked cheap and nasty just like the plastic they are, yet the grips on the worn black were a very dark walnut looked nice on the black but because l was bored l switched them over, took literally seconds to do and the differe was astonishing and rewarding the faux ivory against the black did give them a genuine ivory look and the contrast was stunning then the dark walnut against the silver colt made them look far more premium, as if customised and looked much more expensive.
@@berntsrensen1217 as an Italian I confirm, the translation isn't wrong
he literally wrote "on submarines the phone doesn't work well"
@@Racrenmaybe it's a reference and we just don't get it, I don't know
bought one from local sports authority here in kona Hi. they only had the nickel plated, so that's what I got. used to have a ruger 30 carbine revolver, that I missed so much, but now, I can have fun with this one. trigger so nice, and good power, and very accurate. and loading the shells in the gun, like a real gun. plus it's all metal like a real gun.and also, it can shoot pellets, thanks to chinature reviews.
Bibiongobygoviiibiviii bnbducruappRIP
Thank you for showing how to put the co2! Other videos don’t show it, gave it a like just for that ❗️
Every video i have watch they have show that
I went to a lot of trouble to fabricate a rifled bull barrel for this pistol now I am happy
I love this revolve a lot. I wish they offered them with different barrel lengths and with adjustable rear sights.
There used to be a 7and half inch version,, dunno if it's still available
You can’t really have adjustable sights on a peacemaker
@@hks2.3stroker6 Yes you can. Aside from various modernized derivatives by Ruger, Freedom Arms, and Magnum Research, Colt themselves sold versions of the 1873 which featured a proper drift adjustable rear sight even back in the 1800s and early 1900s, such as the special order made by the Bisley shooting club. Guys like Elmer Keith also designed his fabled No.5 custom one with a similar sight.
I love the beautiful looks of the Peacemaker, and the classic plow grip feels _absolutely fantastic,_ but man do I not care for the shallow sight trough on the top strap, that's not the sight for a full sized sidearm, that's the kind of no-snag sight you'd want on a small and compact handgun, where you basically wouldn't expect to use them anyway.
@@biggusdickus5986 That'd be pretty cool, though I think a 4" or 4.5" barrel would be best for me, I like how revolvers of that size balance in general, there's still plenty of sight radius, and it looks particularly aesthetically pleasing to me.
The nickel version is a beauty.
Very cool to see both blued and nickel plate look peacemakers. Great video.
13*Luza13*Junior. Jumior $60000 0000000000
$50000000000
Oh and I love the video as well great job on it
Bdhfur
It is so satisfiying to watch!
I would only use one but the colt 45 single action revolver is my favorite gun
cool
HEY NEIL , congratulations on over 3 million views on this review . GREAT
Cheers dude!
Definitly cool, not as cool as the .45 colt, but definitely something for the youngins. I love it.
I like the way you did this video, you let the guns do the talking.
Fakuju bbbiiiiççç
like the way he kept his thumb all over that shitload of writing on the other side of the gun so that nobody can see that it screws up the look of the gun
G
?
charging sound is beautiful
Brought one today. Great review
How many rounds can you fire with a C02 cartridge? How expensive are CO2 cartridges? How powerful is the Colt? FPS?
does anyone know where I can get the black one with the brown handle I've been looking everywhere
Hello.. From what distance do you shoot at the target? It reaches the target approximately one second after the trigger is released.. The muzzle velocity seems low to me.
I have the nickeled one and it works like a dream!
Just ordered one of the pellet versions of this and I'm so damn excited.
@2be Blunt wonderful. No issues at all with it yet. Havent had to take it apart but I should just to clean it. But it's a beautiful gun with a beautiful finish. I cant wait to get another one someday.
@2be Blunt I dont think you'll regret it. The weight is very similar to a real SAA and I love spinning it around like I'm Doc Holliday lol Its the best buy I've made in a long time
yah Hatya yah Pyar mere ko chahie
What size of bullets are the Umarex Colt Cartridges? Do they closely match the .45 Long Colt rounds? I'm trying to find a holster for mine
Was this befor you started talking on you vids bro. You have come along way since this vid hope i get confident enough to make vids with speach :))))))
No bs talking about it or comparisons like others when shooting something like a 92f berreta model and they are all dressed up tactical and even have a course they run through and so on. That parts fine and if people are having fun that's the best thing on the planet. There needs to be more happiness on this earth. But I do think enjoy hearing bad mouthing of other people's videos, and or about there thoughts and so on. There's a time and place for that stuff and a good and bad way of commenting on others work. I'm still trying to learn the best way to not hurt someone feelings when they've put a lot of time and even money into stuff say a video on here etc. Anyways I really enjoyed your video and even though everyone gets a thumb up from me, mainly due to the fact that no matter how bad or how much I completely disagree with a person's words and or such the fact that it still took talent of some kind or of any kind to make and upload not to mention the courage knowing they were going to be attacked and bad words said abut them no matter the topic, subject matter or views expressed there's always jerks using absolutely horrible language that can hurt even people in the industry that are subjected to that style of ugly criticism there entire working group life
+fred jackson Appreciate the comment mate, you do come across all sorts of folks on the internet. I like having valid criticism, but the keyboard worriers just make me laugh! ATB, Rack
What should u do if your safety jams and won't go into safe
uma das minhas armad favoritas
“THE RELOAD TIME IS EXHILARATING!”
yes its the heart of the duel damn you shot my hat
The Cowboy Casanova
Lol so very long story short great job and thumbs up especially this time for such a great job and yes because of this video, oh and this is something like 5 or 6th video but is definitely my last and again yes I'm buying it only cause of this video, I'll let everyone know how I enjoy it after receiving it and all I love and dislike. Thanks again
Es una excelente réplica del colt. 45. Bonita y precisa, la decepción me la lleve al comprobar que la vaina corresponde a un calibre . 357 magnun
Watching your channel is going to end up costing me mint 👍
😈👑💰💰💰💰💰🔫🔫🔫🔫Junior. Cio pelo. SP. Junior.woiqwyi.Biestaxio.
i want them to bring out a buntline special preferably with a detachable stock
Hmm still holding a thumb on the ME BACS SAA, for just 50-60 quid more vs the cost of the Pellet version of the Umarex, high pressure air contained in each cartridge :)
shells looks same size and same stamp on winchester. they work on both?. could tell that on description i would buy lotsa more. i bought both gun and shells that was available. looks indentical. havent fired any shot yet
Cara eu adoro essas colt, acho elas super realistas e precisas, tem excelente acabamento e material de primeira qualidade, muito legal seu vídeo usando as duas versões em funcionamento!
Eu tenho uma adoro brincar com ela prático tiro esportivo mais pra ter esta belezinha VC tem que desembolsar 1800 reais kkkk.
Awesome gun
I need both of the those colts
Em São Paulo tem lugar pra eu comprar pistolas de ar volta 45??
Always use pellelube on the top of the gas cartridge, and read your manual. Some require the BB to be loaded in the front of the shell, not the rear. Some shells are Gold and some are Silver, there is a reason.
Hey, would you check out the SAA replica I built?
Do the same comparison for the pellet revolvers too please.
What's the difference between the pellet version and this one?
@@flyingpiglet rifled barrel
Excellent
Thanks for the vid. Really. Fun to watch.
They are very well made. Made with zink.
Nice video bor
Pardon my ignorance but, is this an airsoft gun? or an airgun?
I just bought an 1858 Remington clone and from what I understand they
must be cleaned immediately after firing or they will rust. What is
involved in that? What solvents and to what degree do I need to
disassemble? I'm told soap and water. Is that true? And what about
lubrication. I'm new to black powder.
This post is on umarex airgun
But if your talking about actual powder burners. I have several original colts and remingtons among others no powder burner reproductions.
Yes Black Powder Us Corrisive but not as pad as you'd think. I have firearms dating as far back as 1420 and U guarantee they didnt use soap and water back then yet they have mild potting and zero rust fully functional and used today.
You should Alway clean your firearm after using it before storing it away till the next time and doesn't matter if its black powder or smokeless. Stake care of your Weapon and it will take care of You.
I personally Use a copper cleaning brush ( bore brush) for the bore and the chambers in the cylinder followed by cloth patch with hopps number 9 in bore and chambers on the cylinder let sit a bit then repeat and again use the copper cleaning brush ( bore brush) then another cloth patch of hops number 9 followed by a nylon cleaning brush ( bore brush) repeat with cloth patch and hops number 8 followed by nylon brush ( bore brush). Then I use a dry patch on the bore and each chamber several times.
I repeat these procedures till my dry patch comes out looking fairly clean then I use a cloth patch with light coating of hopps number 9 on the bore and rack chamber for storage.
As for the outside of the gun I use a cloth soaked in hops number 9 let it sit for 15 29 minutes then use a dry cloth to wipe clean repeat if needed. Then wipe the entire gun down with a very light coating of hops number 9 for storage.
How far do you strip the gun for cleaning, basic cleaning remove the cylinder remove the nipples from the cylender let nipples soak in hot water while cleaning the gun. ( let dry or blow dry when finished cleaning the rest of the gun and give very light coating hops number 9 for storage and reinstall in each chamber on cylender when finished cleaning ready to re assemble.) Once everything is cleaned reassemble slightly lubricate and store.
Depending how often you shoot and how many rounds at least once every month every second month at most a total strip down and cleaning, remove cylender, chamber nipples, grip panels, main spring, hammer, cylender locking bar/trigger spring, trigger and ratchet arm and cylender locking bar.
Using small brass or copper wire brush truly scrub the inside of the entire frame when these springs and parts rest and put light coating of hopps number 9 the roughly clean then lubricates each part and spring as well as the rest of the gun as mentioned. Reassemble give light coating of hops number 9 for storage.
How strong is this gun ?
hi i bought one of these, and its awesome and all, but when i cock the handle one of the clicks doesnt make a sound anymore had it for a few months any idea what it could be
Ban e cay sung a
A o au
plan on getting one of these.
the
I
Waswondering theglowinaoz
Do you have the whole strict with them pistols
Acho perfeita exelente acabamento. Como faço pra comprar um a
nice video
No convo,straight product👍
which version would you recommend and why ?
cheers
Both the same guns, I like the blued one myself... Atb, Rack
It seems that they all have that ''crappy'' finish on the Cilinder edges and some places on the gun.. I picked up mine today and it has also little dents on the edges of the cilinder it looks like it was dropped on concrete..
Como adquirir um exemplar desse Colt ?
Where should this gun be bought from us
Where did you buy this play gun
Please add a link to where i can order one of those colt BB air pistol i live them they are amazing!!
Be kinda difficult to tell someone where they can buy them unless that person asking lives in the same country as the person being asked. The reason why us often places will not ship to another country due to import export laws and the customs office on the receiving end...there are some that will ship to another country BUT IF it is Seized by Customs destroyed and or returned to shipper...The Oerson who Ordered the item and Paid for the item if First and Foremost Out the item,Out the Money Paid for the Item and Shipping, and customs in their country may or may not charge them for the seizure and testing done as well if it was destroyed or sent back to shipper, secondly they may also criminally charge the person who ordered the item for illegal importation of a firearm and much more.
I live in Canada so if you live in Canada you can purchase these from Cabela, Princess Auto, Outdoor Outfitters, Airgun Source and many other places across Canada. Normal Price varies from place to place province to province lowest being $135.00 highest $550.00 Plus Shipping and Handling Plus any Insurance you may place on the order plus applicable taxes in Canadian Dollar. On Sale they range from $99.99 to $499.99 plus the shipping and handling insurance and applicable tax.
When buying from.another country besides the rate of exchange on the money there is still shipping and handling, insurance if you so choose, applicable taxes but Also you will have to pay import tax duty and customs fees and local taxes.
BEST to go to your local sporting goods store, airgun or airsoft store or even your local actual firearms dealer if they don't have it ask if they will order it In for you direct from Umarex. Most Dealers have Import Export Licence which allows them.to Import from Other Countries
how do you clean the gun? Or does it not need any maintenance?
@paul austin Occasional cleaning of the barrel with an oily felt pellet (Ballistol) wouldn't hurt either. Before rangefire pass a dry felt pellet twice to remove the superfluous oil and you are good to go.
Where am I get one
I have the 6mm BB variant of the WG Colt Peacemaker SAA .45
Sweet, the gun can be fanned.
Any fast draw on the horizon?
Have you tried to plink a quarter out or the air?
+pfshooter Never tried fanning should of really. If I'd had ago at shooting a coin out of the air I most likely would of shot my neighbors window lol!
RACKNLOAD same lol are u in uk. Every time I shoot I always get paranoid it's really loud and pissing neighbours off
Probably not strong enough to withdtand fanning. Even standard real steel revolver are not strong enough. People doing fastdraw shooting have them modified to take the strain of fastdraw. Not me saying that but Howard Derby on his channel Fastdraw 101.
@@drdoom-skull2244You are dead right, it will break the hammer and trigger. The guys an idiot for showing it being fanned,. And what was with all the loading
What is the-internal design
So nice 😊
I like them ..very nice ...
Nice 👍
where do you buy these
Careful cowboy, loading it like this you're gonna shoot your own foot :v
Eres hispano
Desi katta pistol Lene Ko Sampark Karen vaaste WhatsApp number
?
Desi katta pistol UP Sampark Karen.o9678092876
Good ol' hickok
joule?
Can we shoot little darts with these ?
How did you get the warning writing off the barrel
Dennis C. Only the ones sold in the USA have that stupid paragraph on the barrell
which versions that's the question, cant decide between antique or blued
+Keith Beckett it's a tough one!
i notice that the hammer of the air gun soft does not go forth word in just half way
এর দাম কত
were the guns that off, or are you that bad a shot? also vid did not show how powerful they are!
how long can u let a half used co2 capsule inside the gun?
Never never never leave a co2 bulb in after finishing shooting even if it's half full throw it away as the pressure of the bulb against the seal causes the seal to harden round the nib and when you put in your next bulb or two it will break the bulb unevenly and will lose all your co2, so have your shoot then take it oot.
Good, I like
was waiting for the cowboy quick unload of all six shots had to subscribe after i saw you do it big thumbs up
Where can I buy them guns
Wait are the cartridges reusable
What is your pellet made of...aluminium,Plastic?
GeekY M they're standard steel BBs
Geez how many shells you putting in them six shooters
You did an excellent job of keeping your thumb over all that writing on the other side of the gun, so that nobody can see that it's got a whole shitload of writing on the other side. that kind of screws up the look of the gun....
Nice looking gun but I wish they would make the hammer sit properly when fired .
+John Price It is for the gas seal.
I just noticed that exact same problem and totally agree, up till a few minutes ago I couldn't stop commenting on how accurate it is or was compared to the real deal as I have owned two real colts. But compared to all I've seen in the past and actually there really hasn't been that many especially in this class. So I guess also considering it could've had a bright orange or red plastic tip and a certain % of the gun in clear plastic as well so ya it's pretty amazing
Fr Ja looks gorgeouse. Is this the most realistic revolver out there at the moment?
Agree 100% !
It's fucking with me ;( lol
Which is the urumax
I love the high definition video. It's like gun porn!
Please dude watch your language because kids get on youtube to you know
+Levi Hickman They shouldn't be on TH-cam in the first place, or better yet, a weapon demonstration video.
No by.
If only they'd make the 7.5" cavalry version...
+Harborne Bluenose I just wish they would come out with wood grips for them. I really miss my old Colt clone, (with the 5.5 inch barrel and wood grips.) I don't mind the faux ivory grips too much, but it just doesn't feel the same as wood grips.
They do make it now!!! I already have the 5.5" but now I'm getting the 7.5" and shoot both at the same time - one in each hand! It's going to be dangerous!
Harborne Bluenose Now 7.5"Already made next time we must excpect for buntline special (12")
Mind Your Own Business They do make them. Also make a custom 3.5 inch with a riding hammer for hand fanning .
लय भारी
How to buy this gun?
9.20...is that safe for gun?
How loud are they? What would you compare 'em to?
They are no louder than any other co2 bb gun, which is very quiet compared with a real one but loud enough that the neighbours will hear.
Yea I've got one now ;D Not that loud :3
+Markus Johansson Yep yep, only about 92 decibels. Pretty neat gun!
Where can i buy one
I want to buy.what the price?
Can this take darts?
Isko kaise our Kaha se Parchesh kar sakate he aur is ki coust kiya hoge
Como faço para comprar uma dessa. E é muito caro. E precisa de registro
o querido registro precisa logicamente
What its price
What is this???
You really don't need that rest.
sur quel site peuxt on achete se colt