Just walked through step by step with your video and mine is put together. Fortunately I did get a power cord. The only flaw in the build was the screw for the scraper was too short. Luckily I have plenty of those laying around. Great video Thank you for putting it together.
Just ordered mine yesterday. So excited! Can't wait so I'm watching all of these. My first roll of filament comes tomorrow so yeah. Just thought I would put this here.
I think you missed a very important detail. Seeing it on Facebook. When installing the purge wiper they say you must move the nozzle head to the middle. Otherwise it messes up. Sorry I can explain. But I am looking for a video that stresses that. Cause I am not real sure. Good video though. Thank you
Getting mine on Friday. Maybe Bambu is pulling an Apple and assuming everyone has a power cord already :D. On a serious note, it is unusual to hear about Bambu being slopping, as their brand is so carefully curated. The way this is packaged, I'm surprised you didn't see an empty slot in the foam when you unboxed it.
Really good video, good pacing too. Just a quick note, the order the PTFE go in the extruder is 1, top left, 2 bottom left, 3 bottom right and 4 top right. Not sure how much difference it makes.
big help ! but also be amazing if u show on the camera what scew go where hahahhaha i know there is a green but u say 8 back 2 front but a side show 2 more , but you not saying in the video , also show on book there is 2 more but the screw was to big there so not sure
I am having a hell of a time getting the poop scraper screw to secure. Update: They sent M3-8 screws for the scraper instead of the 12s. Luckily, I have a whole kit of M screws at my disposal. Update #2: Toolhead failure and firmware will not update. Toolhead will not move on the x-axis.
Not sure about the x-axis issue, had an error pop up saying "x-axis machine something low" had to re tension the belt. As for the update. Had the same issue, saw a similar is with A1 mini happened to people. Got it fixed, the solution I did was to remove the SD card and updated through the Bambu studio software on my computer.
Just walked through step by step with your video and mine is put together. Fortunately I did get a power cord. The only flaw in the build was the screw for the scraper was too short. Luckily I have plenty of those laying around. Great video Thank you for putting it together.
Here I am trying to screw in the scrapper and I'm like it's def to short 😅
My bag came with two screws...
@@SansFear mine did as well clearly labeled scraper, they were just too short.
@@Cody-Blues I found another bag that says "For Purger". It fell out from the parts box. It's the right fit 🤣
Literally having the same issue. I'm going to have to check for that other screw lol
Just ordered mine yesterday. So excited! Can't wait so I'm watching all of these. My first roll of filament comes tomorrow so yeah. Just thought I would put this here.
I think you missed a very important detail. Seeing it on Facebook. When installing the purge wiper they say you must move the nozzle head to the middle. Otherwise it messes up. Sorry I can explain. But I am looking for a video that stresses that. Cause I am not real sure. Good video though. Thank you
If you don’t do this it will not calibrate
thank u ! im currently unboxing mine but im unable to pull out the y axis cover after opening the cover. is this suppose to happen?
Wanted to elaborate on that prob people are having. Something about the cutter and the purge thing. You’re supposed to center something?
The first one I picked up from Micro Center was missing the Purge Wiper lol Guess QC is not great makes me wonder what else they messed up on.
I'm looking forward to this !
Thank you for this awesome step by step.
Getting mine on Friday. Maybe Bambu is pulling an Apple and assuming everyone has a power cord already :D. On a serious note, it is unusual to hear about Bambu being slopping, as their brand is so carefully curated. The way this is packaged, I'm surprised you didn't see an empty slot in the foam when you unboxed it.
My a1 has a very soft subtle wobble front to back. Like the rubber feet are too soft and there’s a high point where the z frame attaches to the base
those table your using what name brand and were to find them???
they are at walmart. work force
Thank you Adam!
Great Video!!! How much desk space does this printer take up with bed movement?
I have an A1 already, the start book says "543mm" clearance needed.
No matter what I do ( I removed all the screws) I can not get the two parts disconnected.
I just got mine and the power chord was the 1st thing I pulled out
Really good video, good pacing too. Just a quick note, the order the PTFE go in the extruder is 1, top left, 2 bottom left, 3 bottom right and 4 top right. Not sure how much difference it makes.
Thank you. Doesn’t seem to make a difference. I just put them wherever and haven’t had any issues.
You made that up. There is no order.
My power cable did not arrive either!! I received the completely wrong type of cable!!!
big help ! but also be amazing if u show on the camera what scew go where hahahhaha i know there is a green but u say 8 back 2 front but a side show 2 more , but you not saying in the video , also show on book there is 2 more but the screw was to big there so not sure
Mine was missing the Y-Axis cover plate. Submitted a ticket to customer service.
Did anyone had trouble removing the first 4 screws that hold the bed fromoving. They unscrew but now they are lose seems hard to pull them out.
I didnt
It must have been a packing issue. My A1 had the power cord in the box.
I am having a hell of a time getting the poop scraper screw to secure.
Update: They sent M3-8 screws for the scraper instead of the 12s. Luckily, I have a whole kit of M screws at my disposal.
Update #2: Toolhead failure and firmware will not update. Toolhead will not move on the x-axis.
Not sure about the x-axis issue, had an error pop up saying "x-axis machine something low" had to re tension the belt. As for the update. Had the same issue, saw a similar is with A1 mini happened to people. Got it fixed, the solution I did was to remove the SD card and updated through the Bambu studio software on my computer.
@@bg4779sounds like a prob people are having with the shoot and knife. Something needs centered. Wish I could elaborate.
assembly starts at @2:30 if you want to skip someone talking for 2 and a half min.