Great video , also check for any sharp edges or uneven wearing in the gaps where the cable goes in the aftermarket leavers because mine was grinding the cable a lot sooner than needed
This is madness how they chose where to thread this cable. I live in Japan and my clutch cable just snapped on my Yamaha FZ 600cc 2004 bike. The bike shop will do their best to fix it asap. There was no way I could pull out the old cable in the car park (where it snapped). I tried 2 spares (luckily I live locally) I had but one was too long, the other too short so, that was that. No bike parts shop nearby so had to make a call to the recovery man...and good luck with that in Japanglish... :D
Great video, just replaced mine in less than an hour. Mine hadn't broken yet, but the clutch handle was starting to stick when I was slowly releasing the clutch. New cable shipped
I had a F4I clutch cable break on me on the highway. It was a fun ride home man =D. I blew every light. Ill be doing the cable soon on my FZ6. Thanks for the vid
Thanks for the video man. Just ordered mine, hopefully I don't run into any hiccups when I'm diving into it. Great video and congratulations on your nuptials!
Your are awesome!! Thanks, Just fit new cable at the garage, I had the bike breakdown so just bought new cable and fit it in provisionally just to get home, left the original cable in place just hooking in the new, not even lifting the tank. Thanks for the tips!! Took me only 20 minutes and bang done!!
Thanks for the video, very useful as I am about to change cable on my yamaha. One tip thought, do not show you keys in videos as someone might copy it easily, just google for "how to duplicate key from picture". Cheers!
thanks for the vid my man, i never would have seen that clip that holds the cable in. I would definitely recommend spending the extra $10 and getting OEM, my aftermarket one works and doesnt stick but it does have a tiny bit of a harder pull which is going to drive me nuts.
Make sure the adjustments are right, I thought it was too short at first, as well, but it's actually exactly how it should be. Did you order it through the link in the description on this video?
Great video thanks man, by the way I tried to change the handlebars on my bike but keep hitting the mirrors on mine and cables not long enough. What bats do you have on yours ?
I jut got my first bike. I have to change the clutch cable it’s about to snap. How do I know if it’s the original??? I have same bike fz6 09. Also what’s a lot of miles for original clutch cable ?
You want to have the lever just flush when the bars are turned all the way to the right or left. It will be loose towards one direction so make it flush there and leave it. Loose is bad.
Because when you twist the bars on direction it pulls against the cable so if you are flush on the tighter side it will be loose on the looser side direction. The 2018 S1000RR was so damn loose you had to be basically 100% lever to bar contact to actually be fully clutched in but I didn't know as I thought they know what they are doing. You want consistent clutch in feel on both directions. This is the same w/ the throttle cable so you might have to move routing of the cable so it returns properly every time. I couldn't come out of wheelies fast enough in the beginning because I didn't know now I can control them because it returns faster.
After getting my bike back scratched from just having shocks done the clutch cable is stuffed. I'll do it myself now, there just isn't sufficient pride in work people do to my possessions.
![[TH] 2024 PMSL SEA W2D2 | Fall | เครื่องร้อน พร้อมลุย](http://i.ytimg.com/vi/JO2_bLow_1Y/mqdefault.jpg)
Great video , also check for any sharp edges or uneven wearing in the gaps where the cable goes in the aftermarket leavers because mine was grinding the cable a lot sooner than needed
This is madness how they chose where to thread this cable. I live in Japan and my clutch cable just snapped on my Yamaha FZ 600cc 2004 bike. The bike shop will do their best to fix it asap. There was no way I could pull out the old cable in the car park (where it snapped). I tried 2 spares (luckily I live locally) I had but one was too long, the other too short so, that was that. No bike parts shop nearby so had to make a call to the recovery man...and good luck with that in Japanglish... :D
Great video, just replaced mine in less than an hour. Mine hadn't broken yet, but the clutch handle was starting to stick when I was slowly releasing the clutch. New cable shipped
I had a F4I clutch cable break on me on the highway. It was a fun ride home man =D. I blew every light. Ill be doing the cable soon on my FZ6. Thanks for the vid
I just had my clutch cable break completely. Waiting for it to be shipped here so I can ride my fz6 again! Thank you!
Thanks for the video man. Just ordered mine, hopefully I don't run into any hiccups when I'm diving into it.
Great video and congratulations on your nuptials!
I'm Brazilian, I bought my fz6 soon. I'm looking forward to learning about it. Thank you.
Your are awesome!! Thanks, Just fit new cable at the garage, I had the bike breakdown so just bought new cable and fit it in provisionally just to get home, left the original cable in place just hooking in the new, not even lifting the tank. Thanks for the tips!! Took me only 20 minutes and bang done!!
Thanks Dude mine just broke last night same deal only a few strands of the cable left. Glad I made it home.
Dang, how fun. haha
But glad I could help!
Thanks for the video, very useful as I am about to change cable on my yamaha.
One tip thought, do not show you keys in videos as someone might copy it easily, just google for "how to duplicate key from picture".
Cheers!
Great video, I was able to push that clip out from the bottom and reuse it. Pain to do but feels good doing it myself. Thanks again brother
thanks for the vid my man, i never would have seen that clip that holds the cable in. I would definitely recommend spending the extra $10 and getting OEM, my aftermarket one works and doesnt stick but it does have a tiny bit of a harder pull which is going to drive me nuts.
Hi, great video. I ordered the motion pro part but am still having trouble making the cable reach on my FZ6 ‘06.
Make sure the adjustments are right, I thought it was too short at first, as well, but it's actually exactly how it should be. Did you order it through the link in the description on this video?
woah u re really tall for this bike! anyway good job, your vids have helped me a lot with my fazer!
kostas anton haha I'm 6'3" so there's that. Glad I've been a resource for you! ☕️
Great video thanks man, by the way I tried to change the handlebars on my bike but keep hitting the mirrors on mine and cables not long enough. What bats do you have on yours ?
Thanks for helping me out! Saved my day!
Got it out, now gotta wait till Monday for the new one 😢
Hey love your videos man! Can you do a tutorial on how to make both headlights stay on. I'd really appreciate that!
TalkingtoCameras I'll see what I can do, but I'm not planning on doing that mod so we'll see ☕️
Thanks man! This will be next weekend's project.
Miko Polo my pleasure 👊
You deserve much more wievs bro I love your videos :)
hüseyin taşkın I appreciate it! ☕️
I jut got my first bike. I have to change the clutch cable it’s about to snap. How do I know if it’s the original??? I have same bike fz6 09. Also what’s a lot of miles for original clutch cable ?
great job ..
You saved my day, thanks for the video!
KompactBild you are very welcome my man!!
Dear Inja. What clutch lever do you have? Where did you buy it? brand name? thanks a lot.
Off Amazon, listed in the descriptions of the videos in this series. :)
Where do you recommend to buy parts and accessories for your fz6r ?? I got a 2013 fz6r but it has been difficult to find parts
I use Amazon and eBay for everything I need!
I ordered the clutch cable you put in description it didn’t fit. I have same bike
10/10 pain in the ass would not recommend. even though i struggled its worth me struggling than paying $400 for a shop to do it. thank for the video
Thanks a lot. I do the same operation on my fz6N. 👌
Good luck!
Can I change slipper clutch in Yamaha fzsV2 India ?
please post more videos about the friend fz6
Fernando jacare will do! Got a few vlogs on the FZ6 coming up. Thanks for watching!
How do you know when to change the cable?
the background noise like 1:50 sounds like menacing music :D
👍🏾Thanks
do you have a vid for the r1?
HiTechKing nah, man, I don't have an R1. Good luck!
You need get the Photobucket image fix chrome extension so the images on forums are visible!
willmacneill aaah
Still, my video is better 😎
You want to have the lever just flush when the bars are turned all the way to the right or left. It will be loose towards one direction so make it flush there and leave it. Loose is bad.
Anthony Abelardo Where did you hear that?
Because when you twist the bars on direction it pulls against the cable so if you are flush on the tighter side it will be loose on the looser side direction. The 2018 S1000RR was so damn loose you had to be basically 100% lever to bar contact to actually be fully clutched in but I didn't know as I thought they know what they are doing. You want consistent clutch in feel on both directions. This is the same w/ the throttle cable so you might have to move routing of the cable so it returns properly every time. I couldn't come out of wheelies fast enough in the beginning because I didn't know now I can control them because it returns faster.
Cable snap for not being lubricated which is why they dont last long. we over look that part on our bikes
After getting my bike back scratched from just having shocks done the clutch cable is stuffed. I'll do it myself now, there just isn't sufficient pride in work people do to my possessions.
Feel you on that. I never trust shops anymore.
Cable has been ordered. Thanks for the clip.