Hey Dave, thanks for the instructions, you rock! I just checked mine (exc300 2023, 160hrs), and got 9ml (fast only). The cycle lasted for one minute. It looks like that's more than enough oil, but I'd like to know what do you make of it? Thanks man 💪
Hi Dave, would you recommend a scheduled replacement of the pump nonetheless to be safest? Or monitor the pumps output and change once an issue becomes evident? Cheers, Lucas
Hi Dave - I'm currently running a TSP map on my 300tpi 21 since 2020/21. As with all things, I know that TSP are on a later version and to me it makes me think TSP wouldn't of updated their map unless if there was improvements. How's it work for us guys who are running old maps that want them updated? Thanks
Normally that will happen if theres a fault code present, or if the idle is set too high. Check and clear any fault codes and make sure that the TPS voltage is 0.60v or less at idle and try again.
Just a quick note. Once you jump the connection, you have to wait a few seconds before releasing the throttle. If you hear the relay click and release the throttle without the wait, 3-5 seconds min, the pump will not operate. I was about to start trying to trouble shoot my pump before realized this!
To clean the oil pump without disassembling it, I thought about putting degreaser or brake cleaner in the oil tank and running several cycles like that. Afterward, I would put oil back in the tank and run more cycles, this time with oil, and then reconnect the pump. What do you think? Has anyone already tried something like this? Should i give a try?
I have stock 2022 250 xcw. When I do the check it runs for 10 sec fast and gives me about 1 ml of oil consistently. Anyone else have that experience? Thanks
Hi, I also have 22' 300 exc with TSP kit and now I can't do the oil pump check. It doesn-t work anymore. It works time to time like once after 20 attemps. Is there any sollution ?
That's exactly what I wanted to know. Specifically the bridging of the wires without the dongle thing. Cheers
Video perfecto amigo! Mil gracias maquina
Thanks Dave very helpful as always. Cheers.
Hey Dave, thanks for the instructions, you rock! I just checked mine (exc300 2023, 160hrs), and got 9ml (fast only). The cycle lasted for one minute. It looks like that's more than enough oil, but I'd like to know what do you make of it? Thanks man 💪
Hi Dave, would you recommend a scheduled replacement of the pump nonetheless to be safest? Or monitor the pumps output and change once an issue becomes evident?
Cheers,
Lucas
does anyone know how much oil for 2022 300i model?
Hi Dave - I'm currently running a TSP map on my 300tpi 21 since 2020/21. As with all things, I know that TSP are on a later version and to me it makes me think TSP wouldn't of updated their map unless if there was improvements. How's it work for us guys who are running old maps that want them updated? Thanks
does anyone know how much the 2018 pump should get out? i got only 1 ml in 10 sec
You should get 1.0ML on all 2018 and 2019 TPI's. So you are good.
Te 250 2018, I’m getting 0,9 or 0,95 or near 1ml. Do i have to be worried about it?
No. He explains the earlier models do 1ml so yours is spot on
My bike can’t priming oil pump, whats the problem , if you have experience share with me please tq
Normally that will happen if theres a fault code present, or if the idle is set too high. Check and clear any fault codes and make sure that the TPS voltage is 0.60v or less at idle and try again.
@@TwoStrokePerformance thanks for your opinion, i aplicated your instructions and finally my 2t pump can priming normally thank tou 🙏🏻👍🏻
Just a quick note. Once you jump the connection, you have to wait a few seconds before releasing the throttle. If you hear the relay click and release the throttle without the wait, 3-5 seconds min, the pump will not operate. I was about to start trying to trouble shoot my pump before realized this!
Где взять эти табличные данные для KTM EXC 300 2020? У меня вышло 1,8 мл.
To clean the oil pump without disassembling it, I thought about putting degreaser or brake cleaner in the oil tank and running several cycles like that. Afterward, I would put oil back in the tank and run more cycles, this time with oil, and then reconnect the pump. What do you think? Has anyone already tried something like this? Should i give a try?
And if i spray inside some brake cleaner?
I have stock 2022 250 xcw. When I do the check it runs for 10 sec fast and gives me about 1 ml of oil consistently. Anyone else have that experience? Thanks
Could you confirm if this method works on 22s please Dave?
yes it works, i have video on my channel for 2022 models
Hi, I also have 22' 300 exc with TSP kit and now I can't do the oil pump check. It doesn-t work anymore. It works time to time like once after 20 attemps. Is there any sollution ?
The tip is accounted for in a syringe