BMW Replace Sunroof Seal for water leaks and wind noise

แชร์
ฝัง
  • เผยแพร่เมื่อ 15 ก.ย. 2024
  • Professional replacement of the gasket on the BMW e65 e66 electric sunroof with the latest upgraded version
    For reduce noise and water infiltration , if job not done properly you will have wind noise !
    BMW code : 54107245551
    PuMA procedure AG
    20315810-01 it means to update ilevel of the car and calibrate the sunroof after replacing the seal because the new seal is thicker. and the latest version of the ilevel has modified torque parameters of the sunroof motor
    Music by Skandr
    Twitter : / skanderofficial
    / skandrofficial
    / skandrmusicofficial
    @skandr5845
    WARNING ! This is NOT a DIY , and I'm not responsible for any damage you may do trying to copy what you see in this Video.
    I've been doing this for over 15 years, that's why some things may seem simple in this videos. I have a vast experience working with BMW MINI and Rolls Royce , abbreviated BMW Group , and that's why you may see things that seem impossible or very difficult to do, done easily !
    I do NOT offer services! This channel is not an advertisement for a shop or something like that, it is for Educational and Entertainment Purposes, Thank You for Understanding !
    If you want you want to support me :
    PayPal : paypal.me/MunteanuO
    Patreon : www.patreon.co...
    The white Grease that I'm using is "Molykote EM-60L"
    Amazon Affiliate, Commissions Earned : if you buy from these links you'll make me rich :))
    Reusable sealant : amzn.to/2JhtNVy
    Main diagnosis HP tablet : amzn.to/372lmcq
    HP rechargeable stylus for my main HP tablet : amzn.to/3NCh1xq
    Multimeters and probes :
    Probes KAIWEETS KET11 : amzn.to/3hoZVnO
    Main multimeter KAIWEETS ST600Y : amzn.to/3M7lUO7
    Second multimeter ZOYI ZT-X 9999 : amzn.to/3pnhNUq
    Old multimeter UNI-T UT33A : amzn.to/3HpqGD1
    Panel Clip Pliers for removing clips and harness :
    amzn.to/32St4nC
    Tesa Highest Quality Heat Proof Engine Compartment Wiring Tape :
    amzn.to/3aoNHbE
    Tesa adhesive wiring cloth tape : amzn.to/3gTycbZ
    VIOFO A129 Pro Duo 4K Dual Dash Cam : amzn.to/3anGDMd
    VIOFO Hardwire Kit for A129 : amzn.to/3x5F0wx
    BMW e46 GM5 Relay : amzn.to/3d2qbTv
    Ultrasonic bath (mine is painted black by me :) ) : amzn.to/3rU3tlj
    Seat Thigh Support Actuator Repair Gear : amzn.to/35TSsXp
    BMW f10 Leather door pull handle : amzn.to/3oLYIZV
    DSO5102P USB Storage Oscilloscope 2 Channels 100MHz : amzn.to/3jPVAJd
    3 in 1 Rework Solder Station : amzn.to/2F0BgWC
    Flux Grease RMA223 : amzn.to/356CWcg
    Chemtronics 60-1-5 SODER-WICK : amzn.to/2Z7iRP5
    Chemtronics 80-3-10 Solder-Wick : amzn.to/3319i5i
    Loctite 243 Threadlocker : amzn.to/356voG7
    For filming /editing I'm using :
    DJI OM 5 Gimbal Stabiliser : amzn.to/3Izu1DI
    MY Camera Samsung s22 ultra : amzn.to/3ZlSKBE
    Camera tripod : amzn.to/32SDRey
    Microphone setup : amzn.to/3jS2uTL
    Microphone lavalier : amzn.to/3iiXE1o
    My work station MacBook Pro 13 2017 : amzn.to/3ckBIvx
    #bmw
    !!! Ops it looks like you've reached the bottom !!!
    #e65 #e66 #movidiu #sunroofseal

ความคิดเห็น • 65

  • @scubaflimedic
    @scubaflimedic 3 ปีที่แล้ว +9

    Nice work! When you compared the old and the new seal, confirmed I need to replace mine. Thanks for posting!

    • @MOvidiu
      @MOvidiu  3 ปีที่แล้ว +4

      Glad it helped!

  • @lesliezulu9197
    @lesliezulu9197 3 ปีที่แล้ว +8

    You are a very meticulous guy.
    I love your attention to detail.

    • @MOvidiu
      @MOvidiu  3 ปีที่แล้ว +1

      Thank you very much!

  • @flankess
    @flankess 4 หลายเดือนก่อน

    Hallo, danke tolle idee und saubere Arbeit❤
    Kann man bei jaguar s type auch wechseln? Bei mir kommt zu viel luft Geräusche
    Wie heisst das dieser Band?
    Gruss aus Deutschland

  • @goldbar5062
    @goldbar5062 ปีที่แล้ว +1

    Hi, thanks for this video. I’ve just bought a new seal and will follow your instructions. Please advise what model your Bosch heat gun is, and what temperature did you have it set on. Thanks.
    Reply

  • @jamelraines7709
    @jamelraines7709 4 ปีที่แล้ว +1

    WOW!!!! This Video Is. A Lifesaver. I'm Pretty Sure The Procedure Is The Same For E66???

    • @MOvidiu
      @MOvidiu  4 ปีที่แล้ว

      Yes!! Is exactly the same:) 😃

    • @RobertMagaro
      @RobertMagaro 3 ปีที่แล้ว

      E66 is the long wheel base version of the E65. Everything else is the same..

  • @sungirlssex
    @sungirlssex 5 ปีที่แล้ว +4

    great video. is it possible to change gasket on the top of windshield glass without replacing windshield glass on E65? on E38 i did that two times with soap and oil.

  • @adriandache4074
    @adriandache4074 5 ปีที่แล้ว +1

    esti extraordinar

  • @larsw8776
    @larsw8776 24 วันที่ผ่านมา

    Awesome job, great attention to detail! What do you use to get rid of the remaining glue residue / grime of the old gasket? It's quite sticky.

    • @MOvidiu
      @MOvidiu  23 วันที่ผ่านมา +1

      To get read of old glue! You need patience! From what I remember, I have used a piece of rubber!

  • @alikigili8051
    @alikigili8051 5 ปีที่แล้ว +1

    THANK YOU

  • @bmw4631
    @bmw4631 2 ปีที่แล้ว

    Hello! Thank for the video. I am in the process of replacing the seal and i noticed that there is a lip on one side of the seal. I can’t remember it on the older seal and was wondering if there is one specific way to install the new seal? Does the lip goes on the top side of the roof or on the under side of the roof or it doesn’t matter? Thanks!

  • @LucianSimaAdv
    @LucianSimaAdv 5 หลายเดือนก่อน

    Salut, mai faci așa ceva? Din ce oraș ești?

  • @annaalessia8328
    @annaalessia8328 5 ปีที่แล้ว +1

    salut. ai cumva un interior pentru un bmw e66?

  • @mariusbancila2702
    @mariusbancila2702 2 ปีที่แล้ว +1

    Wish it was that easy on the e90 as the seal stands on the glass....

  • @lesablier2088
    @lesablier2088 5 ปีที่แล้ว +1

    Hi good job ! No noise with the wind after replacing?

  • @ryansrides9714
    @ryansrides9714 4 ปีที่แล้ว

    Thank you

  • @aass9601
    @aass9601 2 ปีที่แล้ว

    What shop do I need to go to have this done? Also need new seal for trunk.

  • @DAN-DMB
    @DAN-DMB 5 ปีที่แล้ว

    Salut cum se numeste tableta care o folosesti pentru tester.

  • @teodorverdes177
    @teodorverdes177 5 ปีที่แล้ว

    La cate grade reglezi feonul cu aer cald ?

  • @BJ-fk9sq
    @BJ-fk9sq 7 หลายเดือนก่อน

    We’re there any symptoms with the sunroof seal? Or were you replacing as preventative maintenance?

    • @MOvidiu
      @MOvidiu  7 หลายเดือนก่อน

      Hello! In this case, preventing problems created by a worn-out seal is wind noise, and in heavy rain, the internal water menegment is overwhelmed !

    • @BJ-fk9sq
      @BJ-fk9sq 7 หลายเดือนก่อน

      @@MOvidiu thank you!

  • @spiderman511
    @spiderman511 2 ปีที่แล้ว

    What is the scuff pad you are using? General name or brand name would help.

    • @MOvidiu
      @MOvidiu  2 ปีที่แล้ว

      Hello , is a piece of hard rubber . it is cut from a bigger piece , from what or were I don't know i have it from very long time

  • @Unlaced_kickz
    @Unlaced_kickz 2 ปีที่แล้ว

    Should you add some 3m weather stipper ? I really don’t trust the double sided tape

    • @MOvidiu
      @MOvidiu  2 ปีที่แล้ว +1

      Wat double side tape ? you use only OEM parts ! this is not the kitchen window :)

    • @Unlaced_kickz
      @Unlaced_kickz 2 ปีที่แล้ว

      @@MOvidiu oem only correct, but that red tape your pulling apart is double sided tape…

    • @MOvidiu
      @MOvidiu  2 ปีที่แล้ว

      @@Unlaced_kickz Maybe you didn't watch the video correctly and you have skip in through it , if you have watch it from beginning to end you have probably seen that that part is an OEM seal with it's own original adhesive tape 😉 I showed it in the video side by side the new next to the old . So the new OEM seal have it's own high quality tape you don't need to add anything else.

    • @Unlaced_kickz
      @Unlaced_kickz 2 ปีที่แล้ว

      @@MOvidiu the adhesive tape on the oem seal is called
      “ double sided tape “
      just incase you didn’t know.😉
      It sticks 2 sides together hint to why it’s called double sided tape ..
      Typical arrogant dickhead …

  • @almaguerra3123
    @almaguerra3123 ปีที่แล้ว

    Did the sunroof need to weather stripped

    • @MOvidiu
      @MOvidiu  ปีที่แล้ว

      Hello. I don't understand the question.

  • @mortyoreilly
    @mortyoreilly 3 ปีที่แล้ว

    Hi, thanks for this video. I’ve just bought a new seal and will follow your instructions. Please advise what model your Bosch heat gun is, and what temperature did you have it set on. Thanks.

    • @MOvidiu
      @MOvidiu  3 ปีที่แล้ว +2

      Welcome! Bosch ghg 660 lcd , and the temperature depending on what is better for you 200 degrees or higher

    • @mortyoreilly
      @mortyoreilly 3 ปีที่แล้ว

      @@MOvidiu thanks, is that 200 Celsius or 200 fahrenheit?

    • @MOvidiu
      @MOvidiu  3 ปีที่แล้ว

      @@mortyoreilly Celsius :D

  • @goldbar5062
    @goldbar5062 ปีที่แล้ว

    where about are you could you do mine North london will pay cheers !

  • @alfredmayes5005
    @alfredmayes5005 2 ปีที่แล้ว

    Awesome video...I have a leak and need to replace the sunroof. I just ordered the part but I don’t the time for a DIY job. Exactly how many labor hours did it take to complete the installation? I want to make I’m not charged through the roof...pun not intended. Thanks 🙏

    • @MOvidiu
      @MOvidiu  2 ปีที่แล้ว

      Well, the time depends on each one, but I don't think it should take you more than 1.5 hours

    • @alfredmayes5005
      @alfredmayes5005 2 ปีที่แล้ว

      @@MOvidiu thanks and I should have been more clear on my original inquiry. The sunroof glass is fine…I just need a sunroof seal replacement due to a leak. Will this change the labor hours in your expert opinion?

  • @razvanvaleriupintilie4993
    @razvanvaleriupintilie4993 3 ปีที่แล้ว

    Buna Ovidiu. Am wind noise la panoramic sunroof bmw220i f45. Au scimbat roller blind sun/shade si am zgomot de vant la viteza de peste 60km/h. Am facut resetare la trapa si tot degeaba.

    • @MOvidiu
      @MOvidiu  3 ปีที่แล้ว

      Salut ! dar trapa e aliniata corect pe caroserie ? partea din fata sa fie sub nivelul plafonului si partea din spate sa fie peste

    • @razvanvaleriupintilie4993
      @razvanvaleriupintilie4993 3 ปีที่แล้ว

      @@MOvidiu ovidiu iti pot trimite poze cu fata si spate? Cei de la reprezentanta au pus un silicon ca un ruj pe garnitura prima data si se mai atenuase din zgomot dar acu cand au schimbat roller_ul au demontat geamul si montat dar zgomotul e mare si la viteza de 50km/ h

    • @razvanvaleriupintilie4993
      @razvanvaleriupintilie4993 3 ปีที่แล้ว

      Poti sa imi dai un numar de whats up unde pot trimite video. Daca nu deranjez prea mult.

    • @razvanvaleriupintilie4993
      @razvanvaleriupintilie4993 3 ปีที่แล้ว

      In fata este sub nivel in spate un pic peste. Azi am pus o band de scotch lata 4cm peste toata linia fata incluzand garnitura si un pic pe geam. Pe autostrada 110km zgomot mult mai putin decat fara scotch. Deci aliniamentul sa fie corect e doar linia dintre garnitura geam si garnitura trapa/caroserie. Am vazut un video din USA cu un spray cu nozel 3 in 1 rubber seal UV rejuvenating si se pare ca zgomotul dispare. Inca nu am acel spray, in Sydney am gasit ceva gen vaselina special pt rejuvenating/uv protection for rubber seal. O sa aplic maine

    • @razvanvaleriupintilie4993
      @razvanvaleriupintilie4993 3 ปีที่แล้ว

      De asemenea ma gandesc sa adaug in ruber seal ff finut pe partea cu garnitura de pe trapa/caroserie

  • @TheRazvy1990
    @TheRazvy1990 5 ปีที่แล้ว

    La e38 se poate achimba ? ....mi se cam aude vantu .....oare o fi de la ea ??

    • @MOvidiu
      @MOvidiu  5 ปีที่แล้ว

      Salut. Da se schimba la ori-ce BMW cu trapa , da poate sa se auda si de la ia vezi in clip diferenta dintre cea veche si cea noua e special pentru diminuarea zgomotului si infiltratiile de apa

    • @TheRazvy1990
      @TheRazvy1990 5 ปีที่แล้ว

      @@MOvidiu da aia se lipeste ???......foarte interesant

  • @KhanNakash
    @KhanNakash 3 ปีที่แล้ว

    Hi, where did you buy your battery charger from?

    • @MOvidiu
      @MOvidiu  3 ปีที่แล้ว

      Hello , is a Doctor Charge 50 from Telwin but i think it's sold only in Europe

  • @thm.2225
    @thm.2225 2 ปีที่แล้ว

    have you been fix the sunroof motor or Panorama ! since Mercedes & Audi cars
    did you remove all of it then returned it back
    thank you
    I subscribe your Channel today & I see you have collection of videos some of them interesting :)

  • @saren6538
    @saren6538 5 ปีที่แล้ว +1

    Hi amazing work... As you've seen all wiring on an e65 some questions for you
    I have right hand drive Japanese import e65
    Could you covert the TV inside from NTSC to pal ?
    Also the sat nav is locked to Japanese ?
    Can you fit night vision to it ?
    Do you do android touch screen retrofit to replace the standard idrive ?
    All this is in London
    Thanks.

    • @MOvidiu
      @MOvidiu  5 ปีที่แล้ว

      Hello. Yes it can be done

    • @saren6538
      @saren6538 5 ปีที่แล้ว

      @@MOvidiu can I have your email ?

  • @rahdigga6031
    @rahdigga6031 4 ปีที่แล้ว

    Where did you get the seal? Link please

    • @MOvidiu
      @MOvidiu  4 ปีที่แล้ว

      Hello, you can buy the seal from the dealer

    • @rahdigga6031
      @rahdigga6031 4 ปีที่แล้ว

      M.Ovidiu oh so it’s just an OEM seal? The video said an upgraded version so I thought it was a different brand

    • @MOvidiu
      @MOvidiu  4 ปีที่แล้ว +1

      @@rahdigga6031 is an OEM upgrade of the factory, the old gasket is no longer produced they made a thicker one

  • @ridzuanmohd6603
    @ridzuanmohd6603 ปีที่แล้ว

    Hello bro, i want ask u this sealer rubber bmw e46

    • @MOvidiu
      @MOvidiu  ปีที่แล้ว

      Hello I think yes , you can check on Realoem.com

    • @ridzuanmohd6603
      @ridzuanmohd6603 ปีที่แล้ว +1

      @@MOvidiu oh thankyou sir for information