Great video as always. I find the easiest way to remove the PCV valve if it’s never been done before is to cut it out. This way it’s easier to get the bottom clamp off.
Congrats for the amazing video man... I wasn't looking for any video about pcv replacement but as soon as I started watching I had to watch entirely. I am just an enthusiast who likes doing the maintaince by my own (when I vahe the tools and the right tutorial) and now you got a new subscriber. Greetings from Brazil...
Just bought a 2002 B5.5 and your videos are on point great job on the explanations I’m about to replace valve cover gaskets and you saved me on the pcv I’m gonna order one and replace it too
@@CraftyWorkshopBuilds so I think my abs module is out. The abs light stays on and 3 chimes from break light then it stays on solid. Both abs and break light stays on. I'm changing it out today with one from another 02 passat will keep you posted
@@subysuby4680check all the ABS rings on the hubs and make sure they are in good condition. Then, check and make sure the ABS sensors and wires are good.
@@CraftyWorkshopBuilds turns out the one I got was from a manual 1.8L so I tried another one and it worked and all is well! Now I have a coolant leak on the passenger side towards the rear of the engine
I've done this about ten years ago and I found out the hose that goes down from the valve and connects to the crank case, it was clogged with oil vapors sludge, I took a long bottle cleaning brush and a degreaser to unclog it and flush it out, its pointless to replace the valve if the hose is restricted and unable to vent which the pressure will result in pushing the engine oil out through valve cover gasket and seals.
Hi goodevening I'm from trinidad and i have 1 just like this so there aren't many around but if u could do a video on how to redo the complete vacuum system 😅 do I could have car up amd running plz ill be sure to use different colour hoses this time
Great video, very clear. This is the car that I have. I am getting some exhaust smell inside the cabin. It goes away when I hit the air circulation button. I read somewhere that its probably the PCV. Does that sound right or do you have any tips for me?
Do you have to take out your intake manifold to replace your breather hose? My mechanic says he has to and wants to charge me $500 but I don’t believe him. Please help me out
Amazing! I was watching the timing belt replacement and continued onto this one. What is the symptoms to replace the PVC valve. Or should I say what to expect to be a reason to replace it?
Leaks from valve cover gaskets/sparkplug wells/cam seals/cam caps/oil pan. Should really check whole PCV system. If the valve or any of those hoses get clogged up (and they do!) the pressure in the manifold will go go up causing leaks. Replacing or at least cleaning every 50k is a no brainer.
Aye what’s your opinion on that Passat? I found one in York Haven for $900 that just needs a water pump with the same setup as yours. Wagon 4Mo with the V6.
My fault actually it’s a 03 V6 wagon with 4Mo but still how do you like it? Getting my shawty out a bad car situation and for the time being I figured this would be a good purchase rather than give her my B6 A4 1.8T where I’m chasing electric issues where I’m thinking it’s either a bad BCM or CCM.
Sound design
Audio engineering
Camera angles
Just the right amount of explanation
and those tool size details !!
Absolutely brilliant man!!!
Much respect! Thanks for taking the time out to acknowledge my work!👍🏽
dude i hope your channel blows up your filming is top notch and voice-over is phenomenal. please keep up the good work.
Thanks, I appreciate you acknowledging my efforts to provide quality content, much respect!
Great video as always. I find the easiest way to remove the PCV valve if it’s never been done before is to cut it out. This way it’s easier to get the bottom clamp off.
Great style in your DIY videos, clear and easy to understand, good close-ups and resolution. Thanks.
thanks for acknowledging my work, much respect 👍🏽
Great video and I love that you took apart the old one and provide it failed
Much respect 🙏
quite possibly the perfect youtube video
Much respect👍🏽
Congrats for the amazing video man... I wasn't looking for any video about pcv replacement but as soon as I started watching I had to watch entirely. I am just an enthusiast who likes doing the maintaince by my own (when I vahe the tools and the right tutorial) and now you got a new subscriber. Greetings from Brazil...
I'm happy you found this video interesting, thanks for watching! Welcome to the Crafty family, 🇧🇷💪🏾
Love your content, your instructions worked. Very clear and concise,and very calm and well spoken.🙏
I appreciate that! I'm happy you were able to get value from my content, thanks for watching 👍🏽
Just bought a 2002 B5.5 and your videos are on point great job on the explanations I’m about to replace valve cover gaskets and you saved me on the pcv I’m gonna order one and replace it too
I'm happy you found my videos helpful to work on your Passat, thanks for watching!
@@CraftyWorkshopBuilds so I think my abs module is out. The abs light stays on and 3 chimes from break light then it stays on solid.
Both abs and break light stays on.
I'm changing it out today with one from another 02 passat will keep you posted
So I swapped the modules out, ABS and brake lights went off but now the traction light came on any idea why?
@@subysuby4680check all the ABS rings on the hubs and make sure they are in good condition. Then, check and make sure the ABS sensors and wires are good.
@@CraftyWorkshopBuilds turns out the one I got was from a manual 1.8L so I tried another one and it worked and all is well! Now I have a coolant leak on the passenger side towards the rear of the engine
Good Video. Just gota explain what the Pcv is and what it does. What are the symptoms and how to know if you have a bad Pcv.
I've done this about ten years ago and I found out the hose that goes down from the valve and connects to the crank case, it was clogged with oil vapors sludge, I took a long bottle cleaning brush and a degreaser to unclog it and flush it out, its pointless to replace the valve if the hose is restricted and unable to vent which the pressure will result in pushing the engine oil out through valve cover gasket and seals.
Living in California makes this replacement cost an arm and a leg 😭 been watching your vids on the b5.5 to help me reduce my maintenance costs
Good video and work! you make it look easy
Thanks 👍
👍🇰🇿 Passat B5, 2000, BBG, from California. I'm from Kazakhstan 😁
Good job Lemar.
Thanks, much respect 💪🏾
I got code p0010 A Camshaft Position Actuator Circuit open bank 1 can you show me where that is located?
Hi goodevening I'm from trinidad and i have 1 just like this so there aren't many around but if u could do a video on how to redo the complete vacuum system 😅 do I could have car up amd running plz ill be sure to use different colour hoses this time
Great video. Is the PCV valve same as sunction pump?
Nice, very nice again!
Much respect 🙏🏾
excellent video!
Thanks!
It's a good thing VW put that engine in North/South you couldn't fix anything if they wedged it in sideways.
Yea, it would have been an engine removal for everything, lol
Great video, very clear. This is the car that I have. I am getting some exhaust smell inside the cabin. It goes away when I hit the air circulation button. I read somewhere that its probably the PCV. Does that sound right or do you have any tips for me?
Much respect! Yea, if the PVC fails it might cause the valve cover gas to leak oil, if the oil gets on the exhaust manifold it will burn.
Nice instructions soon i need to do on my v6 4motion thanks man 👍🏽✌🏾
For sure, thanks for watching!
@@CraftyWorkshopBuilds do you need to change the holes the one goes from valve cover to pcv or?
@@mankingmwana Nah, it's a direct replacement.
@@CraftyWorkshopBuilds cool thanks.. I wish you have a video of changing the clutch on Vw passat variant 2.8 v6 4motion model 2002 😃.. one love ✌🏾
Excellent video, high quality content, thank you.
Much respect!
you show nice, I have an audi a6 c5 1999 QQD engine, odma / PVC has a different design
Nice video. Great instructions. Have you a video on replacing power steering pump?
Much respect! No, I don't have any video for the power steering pump.
Not yet at least.
This is just great, I really enjoy your videos, thank you so much for this very helpful information.
Much respect, I'm happy you're getting value from my content. Thanks for watching!
Do you have to take out your intake manifold to replace your breather hose? My mechanic says he has to and wants to charge me $500 but I don’t believe him. Please help me out
Awesome 👌
That help's a great deal!
Thanks 🙏
Much respect 🙏
Amazing! I was watching the timing belt replacement and continued onto this one. What is the symptoms to replace the PVC valve. Or should I say what to expect to be a reason to replace it?
Rough idle, misfire while idle, poor mpg, late throttle response
Leaks from valve cover gaskets/sparkplug wells/cam seals/cam caps/oil pan. Should really check whole PCV system. If the valve or any of those hoses get clogged up (and they do!) the pressure in the manifold will go go up causing leaks. Replacing or at least cleaning every 50k is a no brainer.
Amazing video! Very useful!
Much respect!
Any idea where the pcv vacuum suction pump is on this engine?
thank you
Thanks for watching!
Aye what’s your opinion on that Passat? I found one in York Haven for $900 that just needs a water pump with the same setup as yours. Wagon 4Mo with the V6.
My fault actually it’s a 03 V6 wagon with 4Mo but still how do you like it? Getting my shawty out a bad car situation and for the time being I figured this would be a good purchase rather than give her my B6 A4 1.8T where I’m chasing electric issues where I’m thinking it’s either a bad BCM or CCM.
Or if there is a diagram I can have
Can we get a coolant flush video?
I'll see if I can get video on it.
You that mam
Just bypass and delete all the hoses and vent a tube too under the chassis this way ur intake will only breath clean air