Submarine Secrets: Pump Jets And Propellers Explained
ฝัง
- เผยแพร่เมื่อ 21 ม.ค. 2022
- Just a guy talking about submarines. This video is unscripted and unedited, it is raw knowledge sharing.
The propeller, or pump jet, of a submarine is one of the most secretive aspects. Navies hide them from prying eyes. Let's look at what they are hiding. A bit of history and all the fascinating and crazy variations you get. - บันเทิง
![[Live สด] การออกรางวัลสลากกินแบ่งรัฐบาล งวดวันที่ 1 มิถุนายน 2567](http://i.ytimg.com/vi/3canzHC_d0k/mqdefault.jpg)
Since this isn't classified or need to know information, i'll tell you the main reason they hide propellers on submarines. If you can measure the general size, shape, and the number of fins on the screw; you can calculate the sonar signature of the screw. You then add this to your shipboard sonar library to use in helping you identify submarines and ships. It's as simple as that. You wouldn't believe how much time is spent on recording and cataloging sonar signatures.
Being a veteran submariner. I have to say you are correct.
I worked in ASW in the Navy for over 20 years and you are absolutely correct sir
@@dspates51 Sir,why those sub designer refuse to imitate the way squid travel in water?..I think the jet engine idea was derived from the squid swimming system,thus the phase.out of propeller type plane engine in favor of the jet engine. What happen to the plan to duplicate the design of fish tails,fins, etc in their swimming method?..I think naval engineers had already figure.out how fast swimmer fish do their craft via their amazing tail...Is the fish propulsion system hard to duplicate?..
Yup. Wonder if those new 11 blade props will be adaptable to submarine use.
I thought it was more for design and concepts because a lot of technology and design goes into the blades to help stop cavitations that destroy propellers I didn't realize you could figure out the sonar signature that's truly impressive
Prime numbers to avoid harmonics. This is an astonishing revelation to me at my old age. I never thought of that, not once. Fascinating video.
Well done, H. I. Sutton. Very well done, Bravo, sir. Thank you for doing a video that I could never create with getting arrested.
HELLO SUB BRIEF!
FBI, OPEN UP
Darrell is getting twitchy!
Nobody can knock you for staying on the safe side of the line. It’s understandable that your knowledge also contains official reasoning, instead of just intelligent analysis that can point out multiple characteristics without knowing how important each was in the official decision process
Turkey, we need you OUT of prison to make more sub briefs and grace us with hilarious cold waters gameplay!.
"Were not supposed to see insde them...so lets see inside them" cracked me up
I have never been so enthralled by an off the cuff, almost fireside style chat about a topic I thought I had absolutely no interest in. Nice Work
Wow, thank you
This is next level! Thank you!
I was so sick and tired of the typical "content creators", who, much like cheap copies of a Discovery Channel lay the focus on "exciting" and neglected "interesting" and "well researched".
With your content, it is exactly the opposite. Highly knowledgeable individual giving an unscripted, in-depth talk with "simple" imagery.
Well worth the wait between videos. For me, right up there with Greg's channel on aircraft and engines.
Wow, thanks! I think I know the channel you mean. Not sure I am in that league, but I will take the compliment!
Agreed. One thing I can't stand, is the overly dramatic narration and focus on superlative specs and number of swimming pools, football fields, or elephants. You never really learn much about the core technology and it's just meant to impress.
@@wyskass861 🐋 don't forget the blue whales! 🐳🐳
@@wyskass861 Science is / SHOULD BE boring to listen to, because the exciting bits are the actual facts and not the "dress" in which it is presented. This focus on flashy (and often enough EMOTIONAL) narration also "hypnotises" people into STOPPING TO THINK and there is nothing better than GLOBAL WARMING to showcase it, because the ONLY SOLUTION - thanks to the "green fanatics" - is "reducing CO2", but there are at least TWO OTHERS (and a powerful reason why "managing CO2" WONT WORK):
1. "the tragedy of the commons" explains why reducing CO2 will NEVER work ... and even the most willing of countries - my country of Germany - have broken their promised reduction goals, because they simply cant bring themselves to NOT introduce the 5G phone standard which will require more power than the previous one
2. a few years back there was this volcanic eruption on Iceland, which poured loads of ash into the atmosphere, blocking air traffic over the northern Atlantic Ocean for months, but a year later some scientists speculated that it might have lowered the average temperature by 1°
3. a "solar shield in space" would reduce heat incoming from the sun, so it would even help if THE SUN is causing the increase (which we simply dont know, which is another reason why "reducing CO2" possibly wont do anything). With Elon Musk's improvements in "rocket science" (or rather: application), it should be possible to a) transport a large amount of satellites into space, which provide shade for the earth AND to haul a big asteroid from the asteroid belt into a stationary position between sun and earth.
Nobody is "thinking outside the box" like this, because the media like their sensationalised one-track-thinking ... oh and "electric cars" is another one of those topics.
Relavent imagery is really appreciated
Firstly, let me echo all of the positive platitudes expressed before this post. And let me add a BTW, I actually prefer this microphone set-up. I feel that it significantly cut down on some incidental noises (transients?) while not degrading the overall audio quality. Thank you.
I have a true story to tell you. Many years ago, a professor of Mechanical Engineering at the University of Hawaii, Dr. Karl Ihrig, had engineering students in his classes that were in the US Navy. He was invited to look at some nuclear submarines at Pearl Harbor as his student’s guest. In those days, the submarine screw was exposed. He looked at it and exclaimed “Wow, you can actually do XXX knots top speed?” His students were startled & asked how he did that because his figure was accurate, though classified. He said from the size & shape of the propellor, he did the calculation by eye & in his head. This stunned his students & they reported this up the chain of command. After that, the Navy started covering the propellers so that it could not be photographed, especially by satellite. Dr. Ihrig also help design the underwater BART tunnel in San Francisco in such a way that pressure would remain relatively constant (despite the rapid change in depth) by the movement of the train, making pressurized passenger cabins unneeded. It was his idea. There still is an engineering company that bears his name in San Francisco, though he sold it years ago. He has since passed away.
What an excellent and thought provoking video, and as a side note, civil and thought-provoking comment section.
Fantastic stuff. No annoying dubstep music no needless glitz - right to point and technical. Love it, thank you very much!
Current STS here. Not much I can comment on without having to check classifications, but decent video. Some things to think about from an engineering perspective: Slower screws (lower TPK) require bigger shafts due to the high torque. This is why diesel boats don't really employ any crazy super low TPK screw designs, they don't go very fast in the first place and the extra shaft diameter would just rob them of valuable space. Also, mission matters. Pump jets only work well in one direction. Boats that need to loiter/make very controlled movements dont use them often because reverse thrust is extremely inefficient through a pumpjet.
Thanks.
Side note. USS Jimmy Carter has a pumpjet
@@HISuttonCovertShores Seawolf class submarines have propulsors. People often use the term interchangeably with pumpjet but it isn't quite the same. Either way, they are very fast but not great at slowing down.
@@Maverickib On a T boat on patrol in the MIZ (Marginal Ice Zone) we managed to operate for weeks at an average of one knot while maintaining our heading. We had what was in reality a stopped trim.
It was supposed that an SSN was deemed too big to achieve a stopped trim., NOT SO, a stopped trim can be achieved, you just have to develop the techniques and put that into practice. UK SSN crews have that ability, the are VERY highly trained.
@@petewilliams.1122 Well yeah, SSBNs hover all the time. Never said boats can't do it. Propulsors just make it more difficult. Hovering (stopped trim) is more a function of expertly controlling ballast than anything. Seawolf has a propulsor and we can still do it (I've been in the MIZ as well), we just have to be very careful when it comes to increasing speed because the propulsor makes it difficult to slow down.
I’ve also heard about a so called “caterpillar” fitted to a modified Typhoon…
The captain was some Scottish guy
Outdated info, we all know that sub was lost in an accident in the Atlantic!
Magneto hydrodynamic (MHD) propulsion systems? Really bad cryogenic plants, susceptible to damage by goddamn cooks. 😏
Magneto Hydro Dynamic propulsion…sounds like whales humping.
Those notches and pits in the prop blades at 13:10 are most likely the result of cavitation.
Good point. Maybe, pitting fore sure. Was thinking that the fact that they are at the leading edge of the first row of blades made me think it's more like impact, which is also a thing obviously. Many nuclear boats cannot bottom out so I guess that they get less damage
@@HISuttonCovertShores With how much crap is dumped into and floating around in the water I doubt it's a requirement to hit the bottom to take leading edge propeller damage. An encounter with some half sunk logs or spilled contents of an overboard cargo container or Phillip the Sea Manatee (R.I.P. lil guy) could do it. That or just the people removing and transporting it to a museum not caring about babying it since it was just a display piece so who cares if the forklift ran into it a couple of times...
Oh my god. Thank you so much for not using that intro music. You can't imagine how big a relief that is on my ears.
The USN experimented with pump jet propulsion on the USS Glover for surface ships in the 60s. Glover was a very heavily modified Garcia class frigate (hence Glover class) testing out a variety of sound reducing technologies. Some of which went on to be widely adopted, like the Prairie and Masker bubble systems, and some not, like the pump jet. It also was the testbed for various sonar systems throughout it's existence.
Like a rubber-composite exterior to the hull? That unfortunately weathers quite fast and falls off! German U Boats started that one I believe
@@stevenc8140 If it was there, it was long gone by the time I was aboard.
And the pump jet was actually invented by a new zealander and was actually first used on a boat by an Italian that was funded by the Italian navy , whats your point ?
@@Stevie-J The point is he said the US experimented with jet propulsion on a surface ship clearly trying to say it's a US invention when it clearly is not , that would be like me listening to a lecture on TVs and my lecturing saying the TV was invented by a Scotsman and then i blurt out but the US sells the most TVs ..... it's like yes ??? and ?? your point is what ? The TV was still invented by a Scotsman and jet propulsion was still invented by a Kiwi.
I'd be interested to know when you were on Glover.
The last 2.5 yrs I spent in the Navy, I worked in the Vibration Analysis shop (92a) @ 32nd St. in San Diego. We were (supposedly) setting the ground work to reduce or modify the sound signatures of surface vessels (targets😊). That was 76-78.
I had never heard of this type of project
Individual replacement blades would be an excellent way to change "identities" of subs
Every change in blade would change the subs acoustic signature.
There is a lot of other noise that they make aside from only the screw, so that would be like putting on a wig, might work for a short while at a distance but would soon be identified and cataloged as the new signature for that particular sub.
I am fairly sure that the prop you showed fitted to the courageous was not an "operational" propeller. Back in the day we used to fit standard props to platforms whilst carrying out non-operational tasks. Prop changes, carried out alongside or in the dock were a normal procedure prior to going out on operational deployments. This was the same for all the V, C & R boats.
If possible, would you talk a little more about this? I’m really unclear as to whether or not pump jets on submarines use screws or not...
Another video! Great!
I love the 'chat' format to be honest-- it's very well delivered. I like the descriptions of the remarkable and interesting features of these awesome machines. Good duration, and topics are well divided between the episodes. Top job. Very much appreciated.
I love how he says his work is unscripted but his presentations are always so professional.
It’s the ultimate flex!
12:54 The erosion seen on the edges of the props is due to erosion from cavitating flow. Impellers used in hydro turbines (as used to generate power in dams) suffer from the same issue.
You know it's erosion becasue of the way the erosion looks.
You can see cavitation damage from Google Earth? You must be looking at a different picture, my friend.
All hail the king of subs !
The chips on the blades are generally the result of erosion rather than strike damage. I cannot comment more on the propulsor but if you can contra-rotate the turbulence within in the wake aft of the screw without using a mechanical contra rotating device, that would reduce turbulent noise from the wake (it can be done). There a a lot of things hidden in good designs that critical for them to work. Stealth is in the silent service better than speed as we discussed. An excellent piece on a very sensitive matter. Regards
Like detonation in old cars, cavitation at leading edges cause wear and pitting that result in material wear and fracture?🤔🤨😎
@@VistaThaiGuy Yes exactly that; the "bubbles " of cavities particularly at the tip create an explosive decompression that causes significant damage to metal of the blades (not much will resist the force such as ceramics and all sorts of materials) you have to avoid creating them. The prop shown with the chips on I guarantee will have been a noisy prop.
@@johnhargreaves3620 not sure explosive decompression is the correct description.
The fluid does vaporize due to localized areas of low pressure, but the formation of pockets of vapor attached to the surface, in & of itself, is not the problem. The problem arises when these vapor pockets split & collapse, creating high velocity jets of fluid & very high pressures & temperatures as the very tiny wall of water impacts the surface, eroding said surface in the process.
Or at least that's my understanding 15 years after my last fluid dynamics class, anyway. :)
@@Iceberg86300 Yes the process is very complex and I felt that an explosive decompression would be what the majority of people would understand as a simplification. My academic knowledge of fluid dynamics was learned in the 1970s and refined by experience and testing since; the edge and tip velocities are the problem in the fluid; your objective is to reduce the effect like the curved scimitar blades or other methods we pioneered in the propulsor design. Over the years from concept the propulsor design has been refined with design changes and live test runs on boats to steadily improve the noise levels, we have stayed with the propulsor because we have found by gradual improvements in the design we can reduce the noise signature quite substantially. I was principally a chemist and engineer with a fair amount of corrosion/erosion experience ( with one or two other little specialties thrown in over the past fifty years, yes I am that old now and a little strange). Kind regards
yah i would have said that is cavitation damage. as the tips and front edge seem undamaged. normally if a prop hit bottom its the front and tip that show damage not the following edge as we see in the photo.
Excellent submarine video, I learned a lot. Thanks.
if this was unscripted, no matter-- we liked the delivery, smooth and relatively free of ad lib corrections. Clearly, you know the material so well, you do not need a scripted approach.
Very informative, good sound engineering principles you explained very well. I have never heard such a precise and comprehensive video before. (and I view a good number of technology videos)
excellent work! Thank you
The secrecy about pump jets has more of a historic reason. The design principles of pump jets are pretty much universally known nowadays and can be found in textbooks. They look pretty much like a single axial compressor stage of a turbojet, with slightly different blade design to adjust to the fact that water is much less compressible than air.
The blade ratio of rotor to stator blades is a tiny secret left, that defines the acoustic signature of a boat, but... there is a very limited number of reasonable combinations available that all naval engineers will figure out very quickly.
It's actually an axial flow water jet like in high speed water craft. The priciples are quite well known but the secret sauce would be the impeller/stator design hence the coverings.
@@shaider1982 Well, yes. Pretty much the same in other words.
YOU SPEAK SOFTY AND SLOWLY WHICH MAKES listening to you a pleasure and the fact that you don't rattle away like a machine gun means your content is easier to absorb and understand. So very well done and thank you for the upload! BTW didn't know about the prime number consideration but, of course, it makes perfect sense. Subscribed !
Hello H.I. Sutton, thank you for another great video. I appreciate the dense information and related pictures, which are very helpful to visualze that given information. Please keep on making such videos.
Regarding the russian doublescrew: may I suggest another reason for the damage on the trailing edges of some of the blades? I think they are caused by cavitation. The notches are forming not on the outermost points of the blades but at the point where the waterstream most likely departs from the surface of the blades. The little bubbles which are forming when the screw is cavitating do not create noise only but are also ripping constantly on the surface of the propeller. I'm not sure about the metal finishing of russain screws after casting, but I highly doubt that those parts were not polished out for leaving as few points of attack for those destructive elements as possible. So if you look at the blade under the right damaged one, the one which is lighted the best/reflects the most, you can see that the surface of the blade gets more "freckled" to the outside of the diameter. The trailing edge here seems a bit uneven but shows no notches on the edge at all.
15:38 in a gas turbine these stators may be referred to as inlet guide vanes
just thought of something..... I am assuming the submarine can go in reverse obviously not as efficiently but then they would no longer be inlets ... lol
Great brief mate, good to see some of the history behind the design. Keep em' coming!
Really learned a lot here. Thanks for putting this together!
Great and informative work.you have become the Scott manly of submarines.
One development I would expect to see is something already used in some helicopter tail rotors. Unevenly spaced blades. When designed properly this reduces greatly the noise caused by the blade hitting the wake of a strut or of the preceding blade, but I suspect they are optimized for a specific RPM regime.
Car tire water-dispersal grooves vary quite a bit in width, you might be surprise to look at one. They used to be all the same width on a give tire (e.g, a groove every 2cm or something) but that creates a strong energy at one specific frequency which is an annoying buzz or drone. The varying groove spacing creates the same amount of energy but spreads it over a lot more frequencies, creating "white noise" more similar to a wind sound. I'm not sure if this has any useful parallel in propeller design.
Perhaps they already do. A reason for the shroud as someome might take a peel at the impeller, stator and nozzle design.
Ö
Fan blades on many newer cars are often done this way as well for the same reason.
I very distinctly remember the International Bruhaha when 2 Japanese Companies - 1 selling the actual machining equipment, and the other selling the computer control systems,
(remember, this was very early in the CAD/CAM era) between themselves sold the USSR all the equipment necessary to manufacture submarine propellers to US/NATO standards.
A wonderful piece, as always, Mr. Sutton.
NO 12:48 I WAS INTERESTED
man I love your videos. now I will not die happy unless I figure out what info you were about to provide. I used to hate subs. now I love em, watch these all day at work. thanks boss
This was great. First time I've seen actual pics of that nine bladed screw the earlier RN boats had. Glad to hear the _Courageous_ museum is actually happening too. Shame it couldn't be _Conqueror_ though!
isn't the Conqueror to contaminated for the the public to be allowed to walk round in?
@@tommyfred6180 Oh I'd not heard about that. Is it a radiological problem or chemical?
@@rosswhite-chinnery5725 i have no idea and i would suspect its probably classified what the problem is. but she was and has had for along time a contamination issue of some kind. she was supposedly known as a "sick boat" even when still in service.
@@tommyfred6180 No. Courageous just happened to be the best condition boat as far as I’m aware.
@@tommyfred6180 Didn't know she had that reputation. Sounds like she was "that" sister in the class. There's always one!
Red October in the movie used Magneto Hydrodynamic Drives (Caterpillar Drives they called them). This is a drive technology with no moving parts as it relies on moving the water with magnetism. It's actually a real technology but not very efficient if I recall correctly.
Yup, see the Yamato-1 testbed vehicle. Was slow speed. Perhaps with new super conducting magnets, this might become practucal.
@@shaider1982 true the weakness of super conductors has been their need for cryo cooling. Recent advances have brought them temperature up significantly.
Fascinating video. I was a submariner in the Cold War era. Very familiar with many of the older designs.
Thank you for not adding muzak , very good clip!
Well done . I grew up in New London Ct on the Thames River directly across from General Dynamics Electric Boat division with the Navy Sub base just up the river . Seeing subs go by in a almost daily basis was what we grew up with . I ended up working “ the boat “ from 1978 thru 1978 . Anytime we had a sub in dry dock the propellers were always shrouded and those were truly some of the most “ black art “ aspects of the entire machine . Even to this day whenever I am on the water in San Diego i see the props covered at the sub base facility they have there . There is similar science applied with torpedo props as well by the way . Thanks for the excellent explanation .
I was a Navy Diver stationed on an ASR, Sub rescue/towboat, homeported in Charleston. We had to take over the work for the ASR homeported in Groton while it was drydocked. We pulled in during a winter trip and I saw the local Navy Dive boat tied up alongside a sub.
When we left the next morning, the tugs that assisted us getting underway and in the river channel had broken thru a layer of ice that had formed on the river overnight. As we passed the sub with the dive boat, there was a diver with a big iron pick bar bashing a hole in the ice so they could dive. In an instant I resolved to never, never, ever, let them station me in this frozen diver's hell.
I've seen, cleaned and inspected most of US screw types, except the pump types as they showed up after I got out. I ran the first ever waterborne screw change on a Trident.
I probably passed you on that frozen winter morning. Hooya!
@@careyrose6059hey Carey. When were you in Charleston? I was on Orion from 73-78. Trying to remember the ASR we had then, I think it was Petral if I recall correctly.
thank you for this video Mr Sutton! I learned a great deal! and i will be applying this to my RC submarine builds. I have a 50" Virginia in the works right now that will benefit from this video.
Sounds like a cool project. I know that in scale model airplanes they can't generally fly them with scale propellers because air molecules don't get smaller when you shrink the plane down, but I suppose a scale prop on a sub would just underperform, not fail to work completely.
@@AlRoderick scale props do work on subs decently. However I 3d printed a custom one that’s more like an impeller so we will see how that works once it gets a bit warmer where I live. Too damn cold to primer and paint right now
I remember relieving the throttleman for a head call during a northern run and answering bells concurrent with a call from up forward with the instruction to answer all bells until cavitation is noted after which additional turns shall.not be made. Exciting run that one.
Very good video. I learned quite a bit about sub screws. Thank you for that.
Nice work, I really enjoy all of your videos.
A thought on the dubble screw and your comment on the damages on the blades.
I believe that the damages on the edges of the dubble screw is wear from cavitation.
I'm certainly no expert in hydrodynamics but I do know that cavitation is the result of too low pressure at the trailing edge of the blade which certainly seems to fit with where the damages are located.
With a dubble screw setup, the first screw blade will be more susceptible to cavitation issues than with a traditional one screw setup as the next set of blade will decrease pressure between the screws, thus making it even harder to avoid cavitation.
Of course the offset of the two screws will mitigate this issue but I can't but think that at some speeds (accelerations) the trail of the first screw will line up with the second.
This is where the counter rotating screws come in 😉
And the Russian engineers 'proofed' that concept for us, iss potato! (doesn't work)
There is a good reason for SSK's not to have a pump jet and its the same reason that merchant vessels don't have Kort Nozzles ( a pump jet is simply a very very well engineered type of Kort Nozzle ). The reason is drag , the nozzle/shroud is heavy and produces a fair amount of drag so merchant ships ( even the largest ULCC oil tankers ) have an open propeller as it uses considerably less fuel for a given speed and allows the ship to have a faster cruising speed. On fishing boats only those that tow gear ( trawlers/beam trawlers/scallop dredgers ) have Kort Nozzles as those work at far higher efficiency at medium RPM but low hull speed ( you get about 35% more bollard pull from a well designed Kort Nozzle than an open propeller so when towing gear it saves a lot of fuel which over a year means large fuel savings even considering transit time steaming to and from the grounds ). Those fishing boats built to fish static gear ( pots / gill nets / longlines ) only use an open propeller as that saves them a lot in fuel over a year due to not having the extra weight and drag of a kort nozzle set up
What do you do for a living if you don't mind me asking? I have been building and repairing ship and tugboat propellers for 25 years and I have nothing to add to your comment is why I ask. I've built and repaired propellers from Aircraft Carrier size on down to impellers on Seadoo's.
@@mikebrase5161 I'm a retired ( knackered back sadly ) Fishery Scientist, I was a commercial trawlerman before that. Always been interested in how to use less fuel for a given speed/bollard pull and advances in the design of modern fishing boats means you can build a boat of more than twice the displacement on the same length with a larger engine and use less fuel overall , the new kort nozzles are now around 40% more efficient than an open prop when towing gear at 4knots. A Kort system does cost a lot more than an open prop but trawlers will see fuel savings meaning the nozzle pays for itself within 3 years
@@DavieTait I did something you might find interesting. I took all of the specs for the Queen Elizabeth class Battleship I got lucky when I came across the reduction gear ratio used. I wanted to see how much we could raise its not speed with modern Prop styles. With a modern 5 Blade High skew which was a fairytale back then, the speed increase was 4 knots without a loss in Fuel efficiancy which if I remember was around 80%.
I've worked inside more Nozzles than I can count. They were definitely a game changer especially for the Push/ Pull Tug boats which is mainly what I work on currently. The company I work for has built the majority of Tug props on the Mississippi river. My favorite is at least once a year we have to send a tech out to recut the Diameter because a customer will measure the outside of the nozzle not taking into consideration the taper to the inside dia. We even have it in Red on the spec sheet for customers to fill out when they make the order. I had to fly to Tonga before Covid it was awesome hahaha. Best customer paid vacation ever.
Good additional info about Kort nozzles. I had the intuition about this, but you gave the right words to explain it better noting drag.
Maybe not mentioned but a very basic statement would be Kort nozzles are best for high thrust needs. So Towboats. Modern port towboats have azimuth thrusters for maximums maneuverability and maximum pull. As you said.. they move slow but move lots of water which the Kort nozzle is good for.
Another thought, there is always a single ideal speed and rpm for a propeller, so the choice of propulsion has to take into account a usage profile, maximizing operating conditions and their frequency and importance.
Davie Tait: I would have commented much the same as you on the matter of pump jets / ducted propellers and their use on SSK's, but as far as I am aware from what was in the public domain, the now cancelled Attack Class SSK's intended for the Royal Australian Navy would have had pumpjets fitted. I am left to wonder whether the prospect of a lower signature would have come at the cost of reduced underwater range / endurance compared to an optimised open propeller?
I found it interesting they progressing in multiple techniques, the outer ring caught my eye. thanks
This was very informative and frankly quite interesting. Thank you so much for this content.
All I can think of when people talk about pump jets is the Australian politician in the defence committee a few years back.
Yeah classic
That would be Senator Pauline Hanson who has been making her own, shall we say "interesting" contribution to the political discourse of this great country since 1998.
(Stints in jail and on _Dancing with the Stars_ notwithstanding.)
For the "future" (the outside driven Pumpjets) I'd say there might be one additional huge benefit that it might allow direct electrical drive without gears because the motor diameter is huge, ideal for the required torque.
But woulodn't you still need some sort of gearing to turn Battery electric power into mechanical power to power a submarine? Example Washing amching motor to drive a train car
Do Tesla cars use gears ?
@@rayRay-pw6gz yes but but Teslas are powered by batteries, and anything that can generate enough electrical power to run a pump jet like that is going to have a nuclear reactor
@@Laotzu.Goldbug I agree with you on the power plant on a submarine. But, the line of thought was the removal of the gear box . The motor and pump jet are on the outer hull. No main shaft thru hull.
Great presentation. Learned so much new stuff.
These videos make me consider the engineering behind these things. What an awesome job.
Great video as always. But there is one quite important thing, you did not clarify:
Now is it true that pumpjet submarines can only stay underwater for 20 minutes?
haha. understood
@@HISuttonCovertShores I had no doubt you would ;)
lol, best comment
The most patient Admiral ever.
some people in our governments' man... whoa nelly...
A video or article about the concept submarines of Naval Group (formally DCNS) would be really interesting.
Between SMX-21 and SMX-31E (shown at the end of th video) they had a lot of creative and differnt ideas.
Refreshing change from the normal video that, as an example some guy showing a lake and all you see is a face. This is a learning experience and thank you for that. I was in the USAF and know nothing of submarines. Now I do, thanks.
Very useful explanation. Thankyou!
Most interesting topic!
Any submarines that used different sets?
(I'm thinking of one style for silence and another for speed)
A lot of Soviet boats had small electric thrusters on their stern planes, but I believe these were more for maneuvering than stealth. In fact I am pretty sure I've heard that the "spinners" were actually noisier than the main propulsion (probably because they operated very high revolutions).
I do recall reading in one source a long time ago that the early Soviet nuclear boats like the _Novembers_ and _Hotels_ had electric "creep" motors but these seem to have been an alternative means of driving the main propulsion at low revs rather than being shafted to their own separate set of screws.
Thank you for giving me a research term!! I've seen "Annular Screws" on submarine models, or pictures of models, but I never knew what to call it to learn more about it or why it ever existed in the first place. Most of my knowledge comes from airplanes, so my only guess is that the ring is meant to prevent tip-vortices from generating, but as it seems to be rare, and to even have gone out of fashion, I'm guessing it didn't work?
Some LA688Is use/used an annular screw. Not sure if current, but certainly in the late 80s/early 90s was introduced. Proposition was that the connecting ring eliminated tip vorticies and reduced blade flex. Sometimes also called the "ice ring" screw (at least in USN service), and might have had an additional functional use for boats working in icy waters as a means to presumably protect against tip-strike.
LA688I annular screw image: www.mulsannescorner.com/models/Submarines/LosAngelesclassSSN/01.jpg
Enjoyed that bit of education quite a lot. Thank you and well done.
Very cool stuff! I hadn'y seen the stationary rings before.
great video man i love your content and i love your website (its one of my bookmarks on my toolbar :))
I find it interesting that flip the skew around and we get basically the history of computer fans. Look at a Phanteks T30, Noctua a12x25, Arctic P12, or some Zalman or Asus annular gpu fans. The reason is exactly the same: lowering the noise.
"People don't want you to see inside it... So let's look inside it." 😬👍
And lo, a subscription was earned!
Im so glad you decided to start a channel Sutton good for you buddy.
Something I've not seen here is any mention of unevenly-spaced blades. I remember asking my Dad why the cooling fan on our Ford Cortina had the blades unevenly distributed around the centre. Dad (who is an engineer and used to be editor of OEM design) said that it was to mix up the frequencies of sound produced and to avoid producing a more noticeable constant hum of a specific frequency for a given engine speed. Given the the key to propulsion in a submarine is stealth, has this concept not been tried on submarines?
I think this was touched on when he mentioned skew-back screws having prime numbers of blades to avoid getting a harmonic resonance. You might be able to reduce this even more by having unevenly spaced ones but you would likely significantly reduce the efficiency of the submarine without a commensurate decrease in audible signature making it worthwhile. Since the radiator in your car doesn't have to worry too much about efficiency, and the subjective noise quality is all that matters, it's a good trade-off in that case.
Also, I'm not entirely sure so an engineer can correct me if I'm wrong, but I think that in unevenly spaced propeller would create uneven propulsion, requiring a constant steering correction just to go straight. Obviously this is not desirable on a submarine.
I'm guessing that pitch props aren't viable with screwback props on submarines? Aaron talked about how a pitch prop can throw of the estimates of the sonar men based on shaft speed.
Oh yeah, he mentioned that during the Perry class vid didn't he?
those are used on sailing ships so that when you sail it causes less drag. not sure what would be the advantage on submarine. i think it would be poor steering just with such propeller
@@jebise1126 That is one of the applications, on freighters and other motor vessels, like the Perry-class, they are used to have the engine be in the most economical spot regarding Revolutions per Minute, while also freely controlling the ship speed.
@@jebise1126 Presumably it would be used like a helicopter where you are differentially changing the pitch as the blade goes around so that the left side of the propeller produces no thrust while the right side does to turn to the left, or the top produces thrust to enter a nose down attitude, etc. The advantage would be in eliminating the drag and noise associated with having moving hydrofoils like rudders and dive planes. But yes, having a single relatively small (compared to a helicopter certainly) propeller thrusting along the center of mass would seemingly not accomplish much in the way of differential thrust for something like evasive maneuvers, but it might be suitable for general cruising and navigation with deployable control surfaces or other thrusters utilized when the need arises.
That is the best "unscripted" video I have watched. Well done!
to be fair, i found this by accident.however i decided to watch it and i actually learned something worth knowing today. great informative video. thankyou. now subscribed
Excellent, thank you! I have painted many a model, and not fully understood the various designs, and now I do. I wonder if the designs vary also based on the primary use being blue-water vs littoral? Do you think they could design the propulsion to be in-board, kinda like a jet-ski uses?
17:28.
Pump jet system is similar to jet ski
jet skies are extremely noisy pumps
Sutton when you say you dont think we will see a worm drive in the future, are you referring to the MHD drives such as the ones fitted to Yamato 1? (probably a dead end as quiet but not very efficient energy wise) or an Archimedes Screw (called a worm drive in mechanics), which some small boats use due to higher damage resistance/less chance of fouling and better acceleration. I think with the advances in electric propulsion mounting motors outside the hull these may possibly have a future due to their extreme efficiency and more compact diameter allowing fitting to the sides of submarines.
It was a reference to Hunt for Red October
I too wondered what he meant with worm drive at 19:39. A worm drive is a certain kind of gear and has nothing to do with propulsion. My guess is he mixed it up with what is called caterpillar drive in the film The hunt for Red October (maybe also in the book) which is the fictional name there for magnetohydrodynamic drive like that of Yamato 1. Worms resemble caterpillars so that might have caused a slip of tongue.
@@HISuttonCovertShores With as little as i know about the subject I am glad I caught that reference lol.
I guess what we are talking about here is a pump inducer. These are good for achieving a significant pressure rise with good margin to cavitation. You often see them employed as a pre-stage (before a conventional centrifugal impellor) on rocket engine turbopumps where the power density is huge but cavitation must be avoided. Thing is though, for submarine propulsion what we want is a high volumetric flow-rate device with little pressure rise, not the other way round. So I don't think you'll see them employed here.
@@n2b998 Like on a torpeodo (aka) The Bedfors Incident? Anyone? Does anyone believe the Bedford Incident occurred? In some form or another?
Thanks for this, appreciate all of your videos
HMS Courageous has been open as a museum for a long while, however it’s not open 24/7, you have to book a tour. 👍
Thank you, your videos are so interesting. My Dad would have loved watching them, unfortunately he died before the internet age. He was the senior test Engineer for the UK nuke sub program in the early 60's, after getting trained in USA in Pennsylvania. Your videos would have been totally followed by him, and no doubt added to with commentary.
I found it interesting that the number of blades had to be a Prime Number to reduce vibration. Go figure!
Untrue.
"this is my drawing, its not very good"
The drawing, made in paint:
*detailed and perfectly fine infographic of a rare type of screw*
This is awesome, was always fascinated by the technology behind these
Very interesting stuff from the more (well, more than the average) technical side of things. Very good explanations of stuff that's somewhat secretive. I'd love to hear something about the Toshiba-Kongsberg scandal - which saw Western-aligned countries funneling CAD/CAM equipment to Russia to help them make quieter propellors.
The side propeller could be possible with electric motors driving them. Without the big shaft you could make a tail fin like a dolphin or shark
Or no fin if you have sufficient pump jets.
I just watched a 218SG return to Kiel harbor from some kind of sea trial a few weeks ago, cool that you used it as an example here!
I worked in Kiel a couple of years ago. Could see the Subs come in from my office. Sometimes one of them was playing the pirates of the caribien theme on speaker when sailing in with crew on deck, (if i remember correctly).
@@theacme3 oh like in the beginning scene of the first movie? That's amazing
Nice information!
Learned a lot, thanks.
fascinating.
Interesting. I am a retired US Navy submariner. I remember the screws well. I recall being told that the number of sickle blades on the screw was classified. There were seven. I always thought that ridiculous since the floating dry dock in Scotland was open at both ends. Even with the screw covered by a shroud, all anyone needed to do was count the peaks on the shroud.
Did you just leak classified information?
@@parallax9084 I highly doubt it. If you notice in some of the more modern submarine movies, the screws are frequently depicted with seven sickle shaped blades. There's also photos of submarines all over the place im drydocks where the screw is plainly visible.
@@robr2389 is there any classified information you would tell me?
@@parallax9084 No. Nothing that's not already publicly available.
@@robr2389 Unfortunate. I wish you luck, goodbye
Another wonderful video. Thank you sir
outstanding tutorial , thank you
so back in the early industrialized wars, mainly WW1 , surface ships used various paint schemes to thwart visual targeting and identification
i wonder if there is an analogy here for the sound signatures of submarines, for example varying the pitch of the static blades, or having an independently rotating vortex diffuser
or perhaps even changing the mechanical properties of internal components to alter the acoustic signature of the propulsion, such as bearings which can be repositioned along the length of long shafts, or mounting machinery on dampeners with adjustable tension and stiffness, which could all be actuated electronically and simultaneously so as to obfuscate the submarine's identity, or perhaps even configured in a specific way to mimic another craft
One technology used to reduce sound outside submarines is frequency smoothing. If you have something that makes sound, you deliberately mismatch the parts that make the sound so that they don't sync up. For instance, a tyre tread is made in very uneven arrays, so that the sound generated isn't in one frequency, but across many frequencies. That means that in any frequency you are hearing in, the decibels is much lower.
I'm not sure if the secondary blades are all matching perfectly in a prime series or of they also arrange them to be mismatching and breaking up frequencies.
RaDAR and SoNAR absorbing materials are cutting edge tools in the ongoing naval arms race.
Interestingly the centreless propeller was being used in a experimental seabed electrical generator in the Bay of Fundy.
Fascinating. I have a friend, but he is very opsec oriented. My memory is, "do not cavitate" 50 years ago. LOL thanks fo rposting.
I love these insights you are giving us. thank you!
Allow me to correct a couple of errors. The first of class HMS Swiftsure, and first of class HMS Trafalgar both had nine bladed screws. The rest of the S boats had pump jet propulsors. The rest of the T boats had pre swirl pump jets or PSPJ, ( I am not allowed to quote the number of blades or rotor design because of the OSA).
Further... NINE blades does not equal frailty or anything like your suggested weakness. Both Swiftsure and Trafalgar had great success with their very robust 1X9 fit with superb low revs equaling very low turns per knot or TPK. With hardly any revs on at all these boats would fly. Both 1X9 screws were gigantic, 20 feet in diameter and at the time they both had the lowest TPK in the world (I know of what I speak).Becsause of the size of the screws both Swiftsure and Trafalgar were fitted with BIG rudders, the follow on S boats had small rudders. ALL the T boats had big rudders. Both screws were made of nickalium and were true feats of engineering. With exceptionally low revs came the advantage of being able to have an excellent reduction ratio of engine to shaft (once again I am not able to quote numbers because of the OSA).
On one occasion during my time on Swiftsure we needed battle short revs astern, we dragged THREE ocean going tugs 100 yards astern with us, the ocean going tugs bully supertankers in their day to day lives, they felt the raw power of an S class SSN that day.
One another occasion we needed full ahead revs to get out of a situation faster than we got into it (always have that ability). In no time flat we exceeded thirty knots and we were NOT cavitatting!!!! Like I said, these screws were GIGANTIC±
HMS Churchill was the first SSN in the RN to have a pump jet, Once the design was proven she reverted back to a screw.
Once the USA saw that prolusors were not going to fail drastically and that the Brits had made them work then they wanted in. PSPJs fitted to the T boats were and are still exceptionally quiet. I expect the same to be said of the A boats and the bombers.
I hope this has been informative. 👍
Thanks, yes good info.
Was aware re first of class having the screw, just not going into so much detail in a video. Re fragility, interesting. But have got the frailty from somewhere.
You might like my article and cutaway of the T-boat. Not intended to be 100% accurate for very obvious reasons, but hopefully captures the feel. Also, mix of individual boats in internal arrangements. www.hisutton.com/Royal-Navy-Trafalgar-Class-Submarine.html
@@HISuttonCovertShores The T boat accommodation ladder (from the main access hatch to the control room), the first nine feet or so is straight up and down fore and aft, and then (the next six feet or so) slants to starboard, well it was when I shipped out on the black pigs! I remember showing some former German U boat captains around. When told that at the bottom of the accommodation ladder they were already fifteen feet underwater, their eyes became wider and wider, I heard a genuine comment, 'what could we have done with one of these...' I'm sure they were all contrite National Socialists!
When they saw the bomb shop however...
This might sound weird but this video reminds me: Have you thought about doing a video on the submarine from SeaQuest DSV? If I recall it had some really unusual but plausible technology at work.
Maybe electric driven rim pumpjets, could be fitted with deflecting horizontal and vertical fins at the end of the tube ducting channel, plus fitting upto three or four rim pumpjets being installed.
With four rim pumpjet of them fitted around the hull, spaced at 90 degrees apart either above and below plus on either side of the hull?
Or four rimjets positioned two on either side of the hull, but on near the top of the hull and the other near the bottom of the hull on each side of the hull.
Or just three rim pumpjets spaced out 120 degrees apart, but with these rim pumpjet propellor blade, actually having a double or triple propellor blade layout, with 5 blades, then a set of 7 blades plus 11 blades?
Also using replacable interchangeable compsite-alloy blades, with these blades maybe coated with a ceramic layers, to protect the blades from damage and from corrosion too.
Or maybe in the future submarines and surface ships, will both be fitted with multiple rim pumpjets in a series within an extended ducted housing, along the side of the hull for upto half or three quarters of the hull length, to create a very silent and quite propulsion system at high speeds?
In way creating a worm drive like system, as suggested in the novel Hunt for Red October.
Excellent. Just what I was curious on. Cheers.
Many U.S. and other countries, the boats have more than one type of prop to use, either speed or patrol, and they can change the props out while water born depending on the up coming mission. And those props are called Scimitar bladed props, the tip flattens out the angle of attack to lessen noise, as the tips hae a faster "Surface Feet per Minute" speed / travel than the mid section or base.
Incorrect
@@ItsMeeJon ok divulge state secrets to prove him wrong
You would need a pretty big crane and a pier to swap propellers on a modern US Navy submarine.
Any chance for a video about the structural considerations of the submarine?
E.g. pressure, width to beam ratio, internal frame, do they study things like resonance frequencies of the rooms inside the ship while it's being designed, or there's so much stuff that it's not an issue?
A resonance problem nearly pulled the Nautilius apart on its return from a round the world cruise about 70 years ago.
Eliminating a bump on the lip of ballast tank opening beneath the hull turned the tank a police whistle at high speed.
Also, cavitation occurs during high activity -- like a hickey;
This chan should have 500k subs with the right production
Wonderful video on the different types of propulsors only one I’ve ever seen thank you very much
Pump it up!
Interesting with the side mounted ring driven on the rim what kind of thrust bearing would be used?
Really liked this format sir,
As we need more of the explanatory videos for the amateur audience.
Excellent video.